Can't copy GoogleServicesFramework.apk to /system/app directory - Kindle Fire Q&A, Help & Troubleshooting

I have been able to root my Kindle and want to get the store working.
I think I need to copy the Google Services Framework APK to the /system/app directory.
I am using ES File Explorer version 1.6.2.5.
My Kindle is version 6.3.2.
When I try to copy the file from the SD card to the /system/app directory it says unable to copy.
Thanks in advance for the help

Did you mount system as read/write?

I'm afraid I don't know what that means. I used KFU 0.9.6 to root the device. I had installed ES file explorer before I did the rooting. Does explorer need to be read/write, or is that an option for KFU? Is it an option I can change or do I have to re-install something?

robvia said:
I'm afraid I don't know what that means. I used KFU 0.9.6 to root the device. I had installed ES file explorer before I did the rooting. Does explorer need to be read/write, or is that an option for KFU? Is it an option I can change or do I have to re-install something?
Click to expand...
Click to collapse
ES File Explorer should have the option to do so, but I don't use it so I couldn't say for sure. If you can't figure it out, I'm sure someone around here will be able to help.

I found the Root settings in ES F E and checked the option for Root Explorer. It gave me a message that test fails option not allowed on your phone. Not sure if that is what I should be looking for or not.

robvia said:
I found the Root settings in ES F E and checked the option for Root Explorer. It gave me a message that test fails option not allowed on your phone. Not sure if that is what I should be looking for or not.
Click to expand...
Click to collapse
Do you have an ADB connection?

The Mount File System option is greyed out.
Below that it says Mount/ , /system as writable.
Does that have to be installed after the rooting is done?
Is there another file explorer option that is better?
Should I uninstall and re-install ES?

ES is on the Kindle. I have copied the APK to the kindle and to the SDcard directory. When I am connected to the computer, my computer only has access to the sdcard directory. I can't even see the /system folder.
ES can see the folder, but can't write to it.

robvia said:
ES is on the Kindle. I have copied the APK to the kindle and to the SDcard directory. When I am connected to the computer, my computer only has access to the sdcard directory. I can't even see the /system folder.
ES can see the folder, but can't write to it.
Click to expand...
Click to collapse
You still didn't answer my question. Do you have a connection with ADB? You were able to root it weren't you? You must have had an ADB connection at some point.

Sorry, Since I was trying to copy the file with out the device connected to the computer, I didn't think it mattered.
When connected to the computer, in device manager, it's Android Composite ADB Interface.
The Kindle shows up as a drive in Windows Explorer. At one point when I was doing the root, it did not show up as a drive.
If I can copy from my computer to the /system directory, that would be great, but since i don't have access to that through the computer, I was copying from the download directory on the Kindle to the /system directory on the Kindle.

robvia said:
Sorry, Since I was trying to copy the file with out the device connected to the computer, I didn't think it mattered.
When connected to the computer, in device manager, it's Android Composite ADB Interface.
The Kindle shows up as a drive in Windows Explorer. At one point when I was doing the root, it did not show up as a drive.
If I can copy from my computer to the /system directory, that would be great, but since i don't have access to that through the computer, I was copying from the download directory on the Kindle to the /system directory on the Kindle.
Click to expand...
Click to collapse
You say you used the KFU to root...do you still have it available? Run it and see if it shows ADB ONLINE.

Yes, the ADB status is online when I run KFU. I also ran Super One Click and it said your device apears to be rooted.
I also installed the app, mount /system (rw/ro).
when I select mount rw, it says the system dir remounted with r/w permission.

robvia said:
Yes, the ADB status is online when I run KFU. I also ran Super One Click and it said your device apears to be rooted.
I also installed the app, mount /system (rw/ro).
when I select mount rw, it says the system dir remounted with r/w permission.
Click to expand...
Click to collapse
Soooo...problem solved, right?

I wish it were that easy. Even though it says it's mounted in r/w mode, I can't get it to copy. Should I try and root it again? Could I have done something wrong? I used KFU and did root with superuser. Should I use Super One Click and unroot then try to root again? I don't remember any options for me to select wrong. Is there a PC tool that alllows you to copy directly to the /system directory? I really thought I was past the hard part. Thanks again for all the help.

Okay, since you have KFU and you have connection with ADB, press Shift then Right-click on the KFU "tools" folder and select "Open command window here". At the command prompt that opens up enter the following (omitting the comments in red, of course) ;
Code:
$ adb push /local/path/to/GoogleServicesFramework.apk /sdcard/ [COLOR=Red]<-- Replace "/local/path/to/..." with the location of GoogleServicesFramework.apk on your computer
[/COLOR]
$ adb shell
$ su [COLOR=Red]<-- If you receive an error here, you need to re-root
[/COLOR]~ # mount -o remount,rw ext4 /system [COLOR=Red]
[/COLOR]~ # mv /sdcard/GoogleServicesFramework.apk /system/app/GoogleServicesFramework.apk
~ # chmod 644 /system/app/GoogleServicesFramework.apk
~ # pm install -r /system/app/GoogleServicesFramework.apk
do the same for AccountAndSyncSettings and GoogleLoginService, reboot, then do the same for Vending.apk (I'm assuming you are trying to install the Market, right?)

Ok. I think I might see the issue. When I rooted the Kindle I did not have the apk copied to the device. It looks like there is a move command that copies the APK file from the SDcard to /sysstem/app folder. I think I need to put the apk in the proper place on the device and then un-root and then try and root it again.
Yes I am tyring to get the market running.
So you are saying there are 3 files that need to be copies? I have the file com.android.vending_3.8.15.apk, but I do not have AccountAndSyncSettings.
The more I read your reply, I'm less sure of myself. Before I root with KFU (or maybe super one click) do I need to have files copied to the Kindle? I guess I would have expected KFU to have these files, but OK if not included. Does KFU attempt to copy the framework file to the proper directory? If so, where does the files need to exist before starting?
I think your instructions here are a command line version of what I am trying to do with ES File Explorer. Is that true?

robvia said:
Ok. I think I might see the issue. When I rooted the Kindle I did not have the apk copied to the device. It looks like there is a move command that copies the APK file from the SDcard to /sysstem/app folder. I think I need to put the apk in the proper place on the device and then un-root and then try and root it again.
Yes I am tyring to get the market running.
So you are saying there are 3 files that need to be copies? I have the file com.android.vending_3.8.15.apk, but I do not have AccountAndSyncSettings.
The more I read your reply, I'm less sure of myself. Before I root with KFU (or maybe super one click) do I need to have files copied to the Kindle? I guess I would have expected KFU to have these files, but OK if not included. Does KFU attempt to copy the framework file to the proper directory? If so, where does the files need to exist before starting?
I think your instructions here are a command line version of what I am trying to do with ES File Explorer. Is that true?
Click to expand...
Click to collapse
You need AccountAndSyncSettings. Are you using a tutorial for this? If so, which, one?
And yes, it is the command line version of what you're trying to accomplish with ES. It will give you more control and you'll be less likely to screw up.

Sure is rooted?
I recently back to stock firm to can check battery issues. I was using JB Hashcode very happy so far and was thinking go back again, but a short pass by the stock firmware was a really bad idea because got an update on the air (6.3.2) and lose my rooted status. I've used KFU again with no luck. Root explorer, droidwall says that i'm not rooted... So sad. Any ideas?

chocaru said:
I recently back to stock firm to can check battery issues. I was using JB Hashcode very happy so far and was thinking go back again, but a short pass by the stock firmware was a really bad idea because got an update on the air (6.3.2) and lose my rooted status. I've used KFU again with no luck. Root explorer, droidwall says that i'm not rooted... So sad. Any ideas?
Click to expand...
Click to collapse
What does this have to do with the topic at hand?

Sorry for not getting back earlier. My weekend included getting hit by a deer. Really messed all my plans up.
I used the instructions here http://forum.xda-developers.com/showthread.php?t=1399889.
These screenshots show an option to install Google Apps, but I don't see that option when I run it. I guess I'm a little confused. Are there different instructions I should be following?

Related

Can't edit main.conf file

Can someone please help?
I'm trying to edit the system\etc\bluez\main.conf file using root explorer.
I can edit the line I want, save and exit but it then reboots the phone automatically and the original unedited file is back.
What am I doing wrong?
BTW the phone is rooted and this is why I want to edit the file...
http://forum.xda-developers.com/showthread.php?t=676175
neomagik said:
Can someone please help?
I'm trying to edit the system\etc\bluez\main.conf file using root explorer.
I can edit the line I want, save and exit but it then reboots the phone automatically and the original unedited file is back.
What am I doing wrong?
BTW the phone is rooted and this is why I want to edit the file...
http://forum.xda-developers.com/showthread.php?t=676175
Click to expand...
Click to collapse
As we don't have write access to /system on a normal booted desire, you have to do all your work in recovery-mode.
I can get into recovery mode ok but how do I edit the file I want from there?
The options I have are:
- Reboot system now
- USB-MS toggle
- Backup/Restore
- Flash zip from sdcard
- Wipe
- Partition sdcard
- Other
- Power off
Extract the file out of the rom, change it, than push it back to the rom.
You can do that from ADB shell while your phone is in recovery.
You can find commands how to backup files and push/delete them back to ROM on this forums, or you can search it on internet.
dont forget to mount /system
adb shell in a new terminal screen
then mount /system
I can't figure out what I'm doing wrong.
I've tried the method suggested by allla and ivicask ie, using adb commands in recovery mode and I get the same result as using root explorer, the file appears to have copied successfully it reboots but the original file is back again
I've also tried vastlopers method and after lots of reading found that the device needs to be booted normally to 'remount' however when I try to push the file now it says "Directory not empty"
It seems to me that this adb method is just a long winded alternative to root explorer, none of which get the desired result.
Please help?
Bump. Bump.
I've now tried adb file explorer but can't figure out how to install Busybox on my device.
I'm out of ideas. Someone must know how to edit/overwrite the main.conf file.
I'm being told elsewhere on this Forum that the Desire cannot yet be fully rooted for r/w access to the /system/ folder. Is this correct?
neomagik said:
I'm being told elsewhere on this Forum that the Desire cannot yet be fully rooted for r/w access to the /system/ folder. Is this correct?
Click to expand...
Click to collapse
Yes it is. It's also written in the root tutorial!

Superuser just won' work!

I rooted my kindle fire using kindle fire utility 0.9.6 (after the rooting superuser wasn't installed on my kindle), downloaded twrp, flashed hashcode jelly bean ROM from this link
http://forum.xda-developers.com/showthread.php?t=1766829
and then flashed Superuser-3.1.3-x86-signed.zip which I downloaded from this link
http://androidsu.com/superuser/
but superuser won't work, when I check the root explorer in ES file explorer it tells me that this feature can't work on ur phone
Please I'm really dying out here
Someone Help Pleeeeeeeeeeeeeeeeeease !!!!!
You need the su binary installed as well. But with that being said, why don't you just install the Superuser.apk?
[Edit:] It's late and I'm not paying attention for some reason. Custom ROMs come pre-rooted and you have Jelly Bean installed. Perhaps there's a problem with ES File Explorer?
soupmagnet said:
You need the su binary installed as well. But with that being said, why don't you just install the Superuser.apk?
Click to expand...
Click to collapse
Thank you for replying so fast
how can I install su binary? and about the superuser.apk isn't that what i flashed into my device i have a superuser icon on my desktop but it just won't add any apps to its list.
Thanks again
At the Superuser website, there are three zip files. One is Superuser, one is the su binary, and the other should be both. Not that it matters at this point.
soupmagnet said:
At the Superuser website, there are three zip files. One is Superuser, one is the su binary, and the other should be both. Not that it matters at this point.
Click to expand...
Click to collapse
what do you mean by not that it matters at this point?
can't I just download the zip and flash it?
soupmagnet said:
You need the su binary installed as well. But with that being said, why don't you just install the Superuser.apk?
[Edit:] It's late and I'm not paying attention for some reason. Custom ROMs come pre-rooted and you have Jelly Bean installed. Perhaps there's a problem with ES File Explorer?
Click to expand...
Click to collapse
Maybe you missed this
soupmagnet said:
Maybe you missed this
Click to expand...
Click to collapse
I tried another app called copy paste it and when I try to use it this message appears:
"Your Phone does not appear to be rooted or has not been given root privileges. to use this application please provide root privileges to this applications"
what should I do?
[Edit] ok now i know my device is certainly not rooted i tried orbot, market enabler and market unlocker they all dispatch the same message your device isn't rooted.
can anyone tell me how to root it?
Scarfacew said:
I tried another app called copy paste it and when I try to use it this message appears:
"Your Phone does not appear to be rooted or has not been given root privileges. to use this application please provide root privileges to this applications"
what should I do?
[Edit] ok now i know my device is certainly not rooted i tried orbot, market enabler and market unlocker they all dispatch the same message your device isn't rooted.
can anyone tell me how to root it?
Click to expand...
Click to collapse
I too used the KFU to supposedly root my KF, but when I tried to install Titanium Backup, it gave me the same error message saying that my phone did not have root privileges... I wonder if there is something not installing correctly when using KFU...
"Root" consists of the su binary, which the system uses to give the user root permissions, and Superuser.apk, which keeps a database of what programs you allow to have those permissions. With "su" only, you will still have root permission, but only at the level of command line interface and your apps will not be allowed root permissions. Superuser.apk by itself is worthless. Custom ROMS come pre-rooted so the need to re-root is usually unnecessary unless something happens to one of the above mentioned programs. The only way to be sure if/which one is missing is in recovery via the command line because custom recovery will provide temporary root access.
Code:
adb shell ls /system/xbin
...look for su
Code:
adb shell ls /system/app
...look for Superuser.apk
Superuser can be installed from within the ROM using the .apk (at least in earlier versions it was possible), or in recovery using the command line or by flashing the signed .zip from the superuser website . The su binary can only be installed while in recovery.
Of course it all can be fixed by re-flashing your custom ROM.
It may also be necessary to rename the check-rooted executable, but only if you're running the stock Amazon software.
I think that pretty much covers it.
soupmagnet said:
"Root" consists of the su binary, which the system uses to give the user root permissions, and Superuser.apk, which keeps a database of what programs you allow to have those permissions. With "su" only, you will still have root permission, but only at the level of command line interface and your apps will not be allowed root permissions. Superuser.apk by itself is worthless. Custom ROMS come pre-rooted so the need to re-root is usually unnecessary unless something happens to one of the above mentioned programs. The only way to be sure if/which one is missing is in recovery via the command line because custom recovery will provide temporary root access.
Code:
adb shell ls /system/xbin
...look for su
Code:
adb shell ls /system/app
...look for Superuser.apk
Superuser can be installed from within the ROM using the .apk (at least in earlier versions it was possible), or in recovery using the command line or by flashing the signed .zip from the superuser website . The su binary can only be installed while in recovery.
Of course it all can be fixed by re-flashing your custom ROM.
It may also be necessary to rename the check-rooted executable, but only if you're running the stock Amazon software.
I think that pretty much covers it.
Click to expand...
Click to collapse
Ok now things are getting worse I tried to turn the wifi on and it didn't work, I tried to reboot and power off the tablet but it just won't work
{Edit} I want to know that by re-flashing the ROM is there a guarantee that those problems won't happen again.
One more thing is that I deleted the ROM from my kindle I can't transfer it from my laptop because the kindle hasn't been recognized after the jelly bean and I can't downloaded because wifi isn't working so what should I do
Thanks in advance
Scarfacew said:
Ok now things are getting worse I tried to turn the wifi on and it didn't work, I tried to reboot and power off the tablet but it just won't work
I want to know that by re-flashing the ROM is there a guarantee that those problems won't happen again.
Thanks in advance
Click to expand...
Click to collapse
There are never any guarantees when it comes to computers and system software, but the LIKELINESS is very high that the problem will be fixed.
soupmagnet said:
There are never any guarantees when it comes to computers and system software, but the LIKELINESS is very high that the problem will be fixed.
Click to expand...
Click to collapse
One more thing is that I deleted the ROM from my kindle I can't transfer it from my laptop because the kindle hasn't been recognized since I flashed the jelly bean and I can't downloaded because wifi isn't working so what should I do
Thanks in advance
Boot into recovery and "mount" your sdcard to USB. The computer should still recognize it.
soupmagnet said:
Boot into recovery and "mount" your sdcard to USB. The computer should still recognize it.
Click to expand...
Click to collapse
I re-flashed the Rom, wifi is working so I dl ES file explorer and checked Root explorer, but when superuser request popped, I clicked allow but it didn't work it gave me the same message, the new thing is that superuser app added es file explorer to its list but I still can't copy apps in the app/system file.
I know I bored you to death and I'm really thankful for ur help but I really need the root.
Scarfacew said:
I re-flashed the Rom, wifi is working so I dl ES file explorer and checked Root explorer, but when superuser request popped, I clicked allow but it didn't work it gave me the same message, the new thing is that superuser app added es file explorer to its list but I still can't copy apps in the app/system file.
I know I bored you to death and I'm really thankful for ur help but I really need the root.
Click to expand...
Click to collapse
Ok, well try a different ROM. If the problem persists then we can try to think of something.
I flashed the Alien droid ROM it's working fine till now but I need to know how to install an arabic keyboard please
Thanks
Ok, I have a dumb question, but from where do you run the DOS commands from? (ie. what directory?)..
c:\KFU?
Right-click on your KFU folder and select properties to find the folder's path. It may be different depending on wherever you've installed it.
soupmagnet said:
Right-click on your KFU folder and select properties to find the folder's path. It may be different depending on wherever you've installed it.
Click to expand...
Click to collapse
Thanks. but not sure i understand.
Here is what I'm attempting to do.. using the root method described here: http://forum.xda-developers.com/showthread.php?t=1638452 under "Getting to fastboot mode" there are a series of command line examples that seem to start with adb.... (ex. adb shell chmod 755 /data/local/tmp/fbmode).
Under Rooting the stock software, the first step command line is "adb shell mount system"
my question is from where do I start (directory) so that when I enter these commands they work?
Or are you saying that I need to fun all these from the KFU directory? (or KFU/tools) or some other directory..
I appreciate the help and feedback..
:h my::
Wherever adb is...Right-click on that folder to find it's path so you can "cd" or change directories to it. Alternatively, you can Shift + Right-click on that folder and select something like "Open command window here".

[Q] Bricked my galaxy s3 while editing the build.prop Please Help!

I have a major problem but i think there is a way to fix it, i just cant figure it out. i was adding google wallet on my rooted s3 and when reverting the build.prop file to its original form, i just copied and pasted the backup and renamed it to the original build.prop to replace the new one using root explorer. my phone does not boot up now i get the samsung startup screen and it shuts off. i could get into cwm recovery mode. any way to fix the build.prop without being able to fully boot the phone? i am on a mac but i could have access to a pc tomorrow if i need.
Its simple if u have a backup. I have not heard of anyway of getting to build.prop thru recovery.
Sent from my SAMSUNG-SGH-I747 using xda premium
You need to restore from backup (nandroid) or start over if you don't have a backup..
Did you copy the original file to ur sd card then back over?
Chances are you did.. I did the same thing lol.. And when u do that it doesn't save original permissions of the file.
The reason the wallet post says to use root explorer is because it saves the file in the same folder permissions and all and you can just rename it back.
Sorry dude u are sol.. Restore from back up or flash a new rom and start over.
Sent from my SAMSUNG-SGH-I747 using xda premium
Get into recovery, do a factory reset.
mrhaley30705 said:
Get into recovery, do a factory reset.
Click to expand...
Click to collapse
Any resolution. I have the same problem.
mrhaley30705 said:
Get into recovery, do a factory reset.
Click to expand...
Click to collapse
I don't think that would work, as far as I know a factory reset only wipes data and cache. The build.prop is part of the system, so it will not change.
Sent from my SPH-D710 using xda premium
Permissions probably got reset. Resetting to factory will not change the build.prop. Either re-install the rom or...
Do this. This will reset permissions to the correct value without affecting your data. This is easy once you get the hang of it. I do not know if I'm allowed to post up the adb file or I would.
I'm going to run through a quick setup of the Android SDK so that you can use adb if you choose to go this route. The SDK will be useful all though rooted phone usage, so I suggest you download it and use it. ADB is a very powerful tool. First, Google Android SDK. The first result should be the official site for the Google developer section. Just open that top link and the page should have a huge button that says "Download the SDK for (Windows or Mac or whatever)". Click it. Mac users.. Yours does not actually setup. You need to find the SDK Manager app within that zipped download and run it. Windows users... Run the setup. When it's done it will open the SDK manager. Both Users... Check the box next to the "Android SDK Platform-tools". Bottom Right, Install x Packages. Make sure you take note of the SDK path displayed at the top of the manager. EG. C:\Users\Josh\AppData\Local\Android\android-sdk. Mac users: Yours will be in the downloaded folder that you extracted. All Users: Navigate to that folder via terminal (mac) or cmd.exe (windows). Windows: cd C:\Users\Josh\AppData\Local\Android\android-sdk ... Mac: cd /Users/josh/Downloads/android-sdk/ ... Then navigate to the platform-tools folder that is within the SDK folder. Here is where ADB is located.
Windows instructions:
Download adb.exe, either through the Android SDK or elsewhere. Use Google.
Connect phone to computer via USB.
Boot phone into recovery.
Use cmd.exe (Use Windows key+R, and type cmd in the run window) to navigate to the folder containing adb.
E.g. "cd c:\Users\Josh\Downloads\adb"
Run "adb shell"
This should initiate a shell to the phone allowing you to run commands on the phone. If you get an error, make sure you have the drivers loaded for your phone.
Run "cd /system"
Run "chmod 644 build.prop"
Optional: Run "ls -l" and make sure that the permissions on build.prop show RW-R--R--.
Reboot phone.
Mac Instructions:
Download the adb application, either through the Android SDK or elsewhere. Use Google. Make sure you download the Mac version, not the Windows or Linux version.
Connect phone to Mac.
Reboot phone into recovery.
Open Terminal on Mac. /Applications/Utilities/Terminal.app or use spotlight to find it.
Navigate to folder containing the adb app. E.g. "cd /Users/josh/Downloads/adb/"
Run "adb shell"
This should initiate a shell to the phone allowing you to run commands on the phone.
Run "cd /system"
Run "chmod 644 build.prop"
Optional: Run "ls -l" and make sure that the permissions on build.prop show RW-R--R--.
Reboot phone.
Side note--> twrp recovery has a built in terminal and the ability to copy/paste files from internal and external SD cards. Not so sure about changing permissions easily....but through the built in terminal....might be able to load what you need (plus twrp flashable found in android dev forum) on external SD card with an adapter on a computer. Flash twrp and transfer files or use built in terminal to change perms. Good luck....
I know editing build props with es file explorer will cause That.
Sent from my SAMSUNG-SGH-I747 using xda premium
Fixed it!
Thanks everyone for your help, i feel like an idiot for not replying to anyone i didnt have it set up to notify me of replies, i figured out it was the build prop that was messed up, im not sure how this worked but i figured i would try to root again and flash the root files using the simple root steps using odin and it actually fixed the file and booted up fine! i appreciate everyones help and hope this thread helps other people because i know many people screw this up the same way i did. (i will never do anything like this without doing a nandroid backup again). THANKS AGAIN!
thanks but..
ibanezbass said:
Permissions probably got reset. Resetting to factory will not change the build.prop. Either re-install the rom or...
Do this. This will reset permissions to the correct value without affecting your data. This is easy once you get the hang of it. I do not know if I'm allowed to post up the adb file or I would.
I'm going to run through a quick setup of the Android SDK so that you can use adb if you choose to go this route. The SDK will be useful all though rooted phone usage, so I suggest you download it and use it. ADB is a very powerful tool. First, Google Android SDK. The first result should be the official site for the Google developer section. Just open that top link and the page should have a huge button that says "Download the SDK for (Windows or Mac or whatever)". Click it. Mac users.. Yours does not actually setup. You need to find the SDK Manager app within that zipped download and run it. Windows users... Run the setup. When it's done it will open the SDK manager. Both Users... Check the box next to the "Android SDK Platform-tools". Bottom Right, Install x Packages. Make sure you take note of the SDK path displayed at the top of the manager. EG. C:\Users\Josh\AppData\Local\Android\android-sdk. Mac users: Yours will be in the downloaded folder that you extracted. All Users: Navigate to that folder via terminal (mac) or cmd.exe (windows). Windows: cd C:\Users\Josh\AppData\Local\Android\android-sdk ... Mac: cd /Users/josh/Downloads/android-sdk/ ... Then navigate to the platform-tools folder that is within the SDK folder. Here is where ADB is located.
Windows instructions:
Download adb.exe, either through the Android SDK or elsewhere. Use Google.
Connect phone to computer via USB.
Boot phone into recovery.
Use cmd.exe (Use Windows key+R, and type cmd in the run window) to navigate to the folder containing adb.
E.g. "cd c:\Users\Josh\Downloads\adb"
Run "adb shell"
This should initiate a shell to the phone allowing you to run commands on the phone. If you get an error, make sure you have the drivers loaded for your phone.
Run "cd /system"
Run "chmod 644 build.prop"
Optional: Run "ls -l" and make sure that the permissions on build.prop show RW-R--R--.
Reboot phone.
Mac Instructions:
Download the adb application, either through the Android SDK or elsewhere. Use Google. Make sure you download the Mac version, not the Windows or Linux version.
Connect phone to Mac.
Reboot phone into recovery.
Open Terminal on Mac. /Applications/Utilities/Terminal.app or use spotlight to find it.
Navigate to folder containing the adb app. E.g. "cd /Users/josh/Downloads/adb/"
Run "adb shell"
This should initiate a shell to the phone allowing you to run commands on the phone.
Run "cd /system"
Run "chmod 644 build.prop"
Optional: Run "ls -l" and make sure that the permissions on build.prop show RW-R--R--.
Reboot phone.
Click to expand...
Click to collapse
So the problem with this route was that for some reason the device was not being recognized by adb, i dont know why, i thought it was a driver issue but once i fixed the phone, i was able to get adb access, so i guess that boot error was preventing it from getting recognized (which i didnt understand because my friend screwed up like me the next day and was able to adb.) but finally fixed it a few days later after trying many things and the fix for some reason was a simple process with odin, i think this article shows what i did, i dont remember exactly tho - http://smartphonefix.blogspot.com/2...r-Recover-Bricked-ATT-Galaxy-S3-SGH-I747.html
ibanezbass said:
Permissions probably got reset. Resetting to factory will not change the build.prop. Either re-install the rom or...
Do this. This will reset permissions to the correct value without affecting your data. This is easy once you get the hang of it. I do not know if I'm allowed to post up the adb file or I would.
I'm going to run through a quick setup of the Android SDK so that you can use adb if you choose to go this route. The SDK will be useful all though rooted phone usage, so I suggest you download it and use it. ADB is a very powerful tool. First, Google Android SDK. The first result should be the official site for the Google developer section. Just open that top link and the page should have a huge button that says "Download the SDK for (Windows or Mac or whatever)". Click it. Mac users.. Yours does not actually setup. You need to find the SDK Manager app within that zipped download and run it. Windows users... Run the setup. When it's done it will open the SDK manager. Both Users... Check the box next to the "Android SDK Platform-tools". Bottom Right, Install x Packages. Make sure you take note of the SDK path displayed at the top of the manager. EG. C:\Users\Josh\AppData\Local\Android\android-sdk. Mac users: Yours will be in the downloaded folder that you extracted. All Users: Navigate to that folder via terminal (mac) or cmd.exe (windows). Windows: cd C:\Users\Josh\AppData\Local\Android\android-sdk ... Mac: cd /Users/josh/Downloads/android-sdk/ ... Then navigate to the platform-tools folder that is within the SDK folder. Here is where ADB is located.
Windows instructions:
Download adb.exe, either through the Android SDK or elsewhere. Use Google.
Connect phone to computer via USB.
Boot phone into recovery.
Use cmd.exe (Use Windows key+R, and type cmd in the run window) to navigate to the folder containing adb.
E.g. "cd c:\Users\Josh\Downloads\adb"
Run "adb shell"
This should initiate a shell to the phone allowing you to run commands on the phone. If you get an error, make sure you have the drivers loaded for your phone.
Run "cd /system"
Run "chmod 644 build.prop"
Optional: Run "ls -l" and make sure that the permissions on build.prop show RW-R--R--.
Reboot phone.
Mac Instructions:
Download the adb application, either through the Android SDK or elsewhere. Use Google. Make sure you download the Mac version, not the Windows or Linux version.
Connect phone to Mac.
Reboot phone into recovery.
Open Terminal on Mac. /Applications/Utilities/Terminal.app or use spotlight to find it.
Navigate to folder containing the adb app. E.g. "cd /Users/josh/Downloads/adb/"
Run "adb shell"
This should initiate a shell to the phone allowing you to run commands on the phone.
Run "cd /system"
Run "chmod 644 build.prop"
Optional: Run "ls -l" and make sure that the permissions on build.prop show RW-R--R--.
Reboot phone.
Click to expand...
Click to collapse
Okay, I got the adb shell to run, but I run into this snag:
"Unable to chmod build.prop: Operation not permitted"
Anyone know what this means?
prior to running that command, type su then hit enter
If I made a CWM flashable unedited build.prop from a stock SGS3 rom would that help anyone? It just seems easier than all those ADB commands assuming you can still access recovery.
stratatak7 said:
If I made a CWM flashable unedited build.prop from a stock SGS3 rom would that help anyone? It just seems easier than all those ADB commands assuming you can still access recovery.
Click to expand...
Click to collapse
I'm sure that'll probably helpful to a lot of people. Unfortunately, I'm using the stock recovery so it probably wouldn't help me...
lyrictenor1 said:
I'm sure that'll probably helpful to a lot of people. Unfortunately, I'm using the stock recovery so it probably wouldn't help me...
Click to expand...
Click to collapse
If you're not comfortable with ADB: You should try to flash recovery (recommended TWRP but at this point take anything you can get) from ODIN. I know I've seen it around here somewhere. Once you do that, then flash the attached file.
This will flash in CWM/TWRP etc. I haven't tested it, so send me a PM if it doesn't work and I'll fix it up.
Edit: I've located the proper recovery file for you to flash. It's cwm, but you flash this with ODIN. Download it from here http://k0nane.info/rom/ecm/CWM-Recovery-LTE-SGS3-v5.tar.md5 . ODIN will increase your flash counter, but Chainfire's Triangle Away app takes care of that like it never happened. Odin can be found in the development thread. If you want to automate this process even further just download the qcom toolkit which walks you through the process of installing recovery. I hope this helps.
Lastly, here's the latest TWRP image file with ADB instructions. Short, sweet and simple. http://teamw.in/project/twrp2/104
crammer04 said:
I have a major problem but i think there is a way to fix it, i just cant figure it out. i was adding google wallet on my rooted s3 and when reverting the build.prop file to its original form, i just copied and pasted the backup and renamed it to the original build.prop to replace the new one using root explorer. my phone does not boot up now i get the samsung startup screen and it shuts off. i could get into cwm recovery mode. any way to fix the build.prop without being able to fully boot the phone? i am on a mac but i could have access to a pc tomorrow if i need.
Click to expand...
Click to collapse
_________________________________________________________________________________________________________________
If you got no back up give us your phone information one of us can send you one I have aTT D2att you
?
Its all in my sig get mobile odin bellow, get the tar for which ever recovery you got. I got all three. CWM, CWM Touch and TWRP for d2att (only) if different phone then use other ones.
Thats my build prop im D2att SG3 ok so just make sure. But you can grab mobile odin bellow and fix it.
_________________________________________
Just get mobile odin HERE
and flash your reocvery there CWM, TWRP, CWM TOUCH... all of them latest all in my sig bro
Here is all drop box to get any of the recoverys --------------------> Recoverys Drop Box
Get mobile odin Here along with the s3 kernal extension its all in here -----------------------> Mobile Odin
If you get hardware id missing error install these old samsung dricers this is a bonus, don't update it ----------------> Hardware ID samsung driver fix
__________________________________________________________
S3 build prop here --------------> here
Mobile odin is simple if download zip in my drop box just install it (or get it form market) download the driver you need (in my drop box) or go mobile odin thread and find it if your on a different phone. Rest is simple just load what your going to flash click the OPEN FILE option in mobile odin click tar and run it.
_________________________________________________________
Get android comander. You can mod build prop easy with it its nice GUI for installing programs or uninstalling or backups or moving files around. awesome try out here --------------------------------> ANDROID COMANDER
need anything else?
---------- Post added at 09:42 PM ---------- Previous post was at 09:20 PM ----------
lyrictenor1 said:
Okay, I got the adb shell to run, but I run into this snag:
"Unable to chmod build.prop: Operation not permitted"
Anyone know what this means?
Click to expand...
Click to collapse
Tiy need to remount system Read Write i don't think its a SU problem it could be but normaly you already got su i forget comand in adv its mount system -r i beleive. I dunno I run a script that mounts it for me let me check it out real fast
---------- Post added at 09:48 PM ---------- Previous post was at 09:42 PM ----------
crammer04 said:
So the problem with this route was that for some reason the device was not being recognized by adb, i dont know why, i thought it was a driver issue but once i fixed the phone, i was able to get adb access, so i guess that boot error was preventing it from getting recognized (which i didnt understand because my friend screwed up like me the next day and was able to adb.) but finally fixed it a few days later after trying many things and the fix for some reason was a simple process with odin, i think this article shows what i did, i dont remember exactly tho - http://smartphonefix.blogspot.com/2...r-Recover-Bricked-ATT-Galaxy-S3-SGH-I747.html
Click to expand...
Click to collapse
Just so you no a common problem when doing commands you forget to do it just trying help didn't know fixed
#!/system/bin/sh
busybox mount -o remount,rw /system
My build.prop got messed up while trying to install Google Wallet on my rooted sg3 and my phone became soft bricked. I had to reinstall the stock jellybean ROM with root that I had been running before this happened, through Odin. Solved my problem. Never got wallet to work though.
Sent from my Amazon Kindle Fire2 using xda app-developers app
Would this work on S3 T-Mobile T-999?
stratatak7 said:
If you're not comfortable with ADB: You should try to flash recovery (recommended TWRP but at this point take anything you can get) from ODIN. I know I've seen it around here somewhere. Once you do that, then flash the attached file.
This will flash in CWM/TWRP etc. I haven't tested it, so send me a PM if it doesn't work and I'll fix it up.
Edit: I've located the proper recovery file for you to flash. It's cwm, but you flash this with ODIN. Download it from here http://k0nane.info/rom/ecm/CWM-Recovery-LTE-SGS3-v5.tar.md5 . ODIN will increase your flash counter, but Chainfire's Triangle Away app takes care of that like it never happened. Odin can be found in the development thread. If you want to automate this process even further just download the qcom toolkit which walks you through the process of installing recovery. I hope this helps.
Lastly, here's the latest TWRP image file with ADB instructions. Short, sweet and simple. http://teamw.in/project/twrp2/104
Click to expand...
Click to collapse
I am having the same problem.... as the person above... Will this .Tar file below work for S3 T-Mobile T-999? Can you make one for that phone?
Thanks for your help!!
Boosoth1st said:
I am having the same problem.... as the person above... Will this .Tar file below work for S3 T-Mobile T-999? Can you make one for that phone?
Thanks for your help!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1746682
Try downloading the toolkit from there. It should contain the necessary T-Mobile files. If you are having an issue, please PM me. Make sure you flash the right one! Be careful and read the whole thread.

[Q] Problem running "adb push stack /data/local/tmp/"

Currently my KF2 is running stock amazon OS (10.4.3), and I rooted the device following http://forum.xda-developers.com/showthread.php?t=2075959
I believe it has been rooted successfully, as I am able to use Titanium Backup and grant root access to ES File Explorer. I also downloaded some root checker app from google play store to double check if it has root privileges.
As I want to flash CM10.1 to my KF2, I have been following Hashcode's guide to install a 2nd bootloader http://forum.xda-developers.com/showthread.php?t=2100963. I am getting stuck with Step 3. I get the following error:
Code:
C:\kfu\tools>adb push stack /data/local/tmp/
failed to copy 'stack' to '/data/local/tmp//stack': Permission denied
elegant_universe said:
Currently my KF2 is running stock amazon OS (10.4.3), and I rooted the device following http://forum.xda-developers.com/showthread.php?t=2075959
I believe it has been rooted successfully, as I am able to use Titanium Backup and grant root access to ES File Explorer. I also downloaded some root checker app from google play store to double check if it has root privileges.
As I want to flash CM10.1 to my KF2, I have been following Hashcode's guide to install a 2nd bootloader http://forum.xda-developers.com/showthread.php?t=2100963. I am getting stuck with Step 3. I get the following error:
Code:
C:\kfu\tools>adb push stack /data/local/tmp/
failed to copy 'stack' to '/data/local/tmp//stack': Permission denied
Click to expand...
Click to collapse
Can you navigate to your '/data/local' directory and confirm that you do have a 'tmp' folder?
soupmagnet said:
enter...
Can you navigate to your '/data/local' directory and confirm that you do have a 'tmp' folder?
Click to expand...
Click to collapse
Using ES File Explorer, I can navigate to '/data/local' directory and I can see a 'tmp' folder.
Problem solved. Instead of using "adb push", I just place the file into '/data/local' manually. The rest of the steps went fine!
No data/local/tmp folder...
So i go into my ES file explorer and i go to my data folder and it shows that i have no local folder, i actually have no folders in this directory. how would i create a local/tmp folder so i can successfully S-OFF my phone?
There are folders in there, key thing is in order to see them you need root. Its weird like that, they might show up over and adb shell if you
Code:
adb shell
cd /data
ls
Or for a more formatted column listing use "ls -n", it will also display permissions of files and folders.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Question Seeing root files from computer?

My OnePlus 9 Pro is rooted. I tried seeing the protected system files such as those in /data from my computer in the following ways and none of the work. (I can see these files with Root Explorer on the phone).
1) command line using "adb shell", "ls -l", "cd data", and then "ls -l". The first two commands work, but I get "Permission denied" on the last command.
2) The Google application "Android File Transfer" running on my Mac
3) The Mac application "MacDroid"
4) The open source application "OpenMTP"
Alls of these lead to only seeing the files in the simulated SD card. How can I did deep into the Android file system from my computer, while the phone is connected?
Thanks in advance
@tk_xda
Put su -c before the ls command, or open a root shell by running su. You also need to have superuser access for adb enabled to use this command.
tk_xda said:
My OnePlus 9 Pro is rooted. I tried seeing the protected system files such as those in /data from my computer in the following ways and none of the work. (I can see these files with Root Explorer on the phone).
1) command line using "adb shell", "ls -l", "cd data", and then "ls -l". The first two commands work, but I get "Permission denied" on the last command.
2) The Google application "Android File Transfer" running on my Mac
3) The Mac application "MacDroid"
4) The open source application "OpenMTP"
Alls of these lead to only seeing the files in the simulated SD card. How can I did deep into the Android file system from my computer, while the phone is connected?
Thanks in advance
Click to expand...
Click to collapse
Try adb shell then su and acknowledge it on phone.....
DavidxxxD said:
Put su -c before the ls command, or open a root shell by running su. You also need to have superuser access for adb enabled to use this command.
Click to expand...
Click to collapse
TheGhost1951 said:
Try adb shell then su and acknowledge it on phone.....
Click to expand...
Click to collapse
Thanks. Is there any way to get this level of access using the other utilities I named, or is the only way from the computer through adb commands?
@tk_xda
You can also use a terminal app to open a shell locally on the device. Be careful and don't run
Bash:
rm -rf /*
It will make a painful brick of it.
Have fun!
tk_xda said:
computer
Click to expand...
Click to collapse
Do a TWRP backup and open it on the computer with 7zip
(editing system files while the system is ON can lead to crash ...)
loopypalm said:
(editing system files while the system is ON can lead to crash ...)
Click to expand...
Click to collapse
Yes I can confirm.
tk_xda said:
Thanks. Is there any way to get this level of access using the other utilities I named, or is the only way from the computer through adb commands?
Click to expand...
Click to collapse
No, you could use Termux on phone, similar to adb
loopypalm said:
Do a TWRP backup and open it on the computer with 7zip
(editing system files while the system is ON can lead to crash ...)
Click to expand...
Click to collapse
I would want to access a small group of files on the computer. Copying an entire backup from the phone would be cumbersome. Typically, I might like to get nosy about the database tables an app uses to store its data and would want just the data for an app.
I would not be editing system files unless I have a specific informed purpose, but would like to be able to copy any of them to my computer that I choose to examine.
TheGhost1951 said:
No, you could use Termux on phone, similar to adb
Click to expand...
Click to collapse
I have Root Explorer app on the phone and can rummage with that when I desire to rummage into something on the phone. My current workaround when I want a few system protected or app data files is to copy them with the Root Explorer into the simulated SD card, and then get the data from there with the computer. By this post, I was hoping to navigate more directly just by connecting the phone to the computer and copying what I want.
tk_xda said:
I would want to access a small group of files on the computer. Copying an entire backup from the phone would be cumbersome. Typically, I might like to get nosy about the database tables an app uses to store its data and would want just the data for an app.
I would not be editing system files unless I have a specific informed purpose, but would like to be able to copy any of them to my computer that I choose to examine.
I have Root Explorer app on the phone and can rummage with that when I desire to rummage into something on the phone. My current workaround when I want a few system protected or app data files is to copy them with the Root Explorer into the simulated SD card, and then get the data from there with the computer. By this post, I was hoping to navigate more directly just by connecting the phone to the computer and copying what I want.
Click to expand...
Click to collapse
Some things are easy and some are not. It can't be about shortcuts all the time. Sometimes the reward takes some effort!
tk_xda said:
... database tables an app uses to store its data and would want just the data for an app.
Click to expand...
Click to collapse
Even if you found a way to mount "data" it will be encrypted (unless you running an old rom or flashed DFE before ...)
see also this

Categories

Resources