Hey guys i have a problem with my windows, not sure if anyone knows how to fix this. Whenever my phone is in DIAG mode, it shows up as COM 525 or higher, and i need to bring it down, but when i try to change it, windows will force close it and wont let me change. I tried to download a windows registry fixer off cnet still dont work. Any one know what i can do?
thanks
Questions and help go in Q&A
Thread moved
Friendly Neighborhood Moderator
Related
I Am Unblocking My Spv M700 And Its All Going Wrong I Got The Tri Coloured Screen But I Have Lost Connection With The Active Sync And I Neeeed Help
Please Can Some One Help Me Through Email Msn Pm Or Here I Really Need Help
When you are on the tri colour screen you are at boot.
You don't need active sync connectivity. Make sure you install hard spl before you flash your device with anything else.
If anything goes wrong with flash hard spl will get you at boot mode again and you can reflash.
Read the trinity guides to get through flashing without any problems...
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
run the updater again once you lose the connection - it will work second time
thank you
ill try it
i got same problems. i tried to start it new several times , finally it worked.
hi sorry
i still havent done it can i add your msn??
it will be quickker
Wiggleyman
Please do not post the same question in half a dozen different places!!. This is Cross Posting and is a breach of Forum rules.
It has taken me some time to clear things up.
You search, read and post if necessary. You wait for a reply.
If you do not get a reply it may be because nobody knows the answer or morelikely the answer is easily found or worked out.
Above all do not cross post and demand answers too quickly. It upsets other members and you will find you do not get answers.
So lets continue with this thread ONLY.
Anybody that can help?
Mike
may he should try another hardspl or sspl ? what other member think about it?
I haven't been able to unlock my touch. I am using 2.31 unlocker, I run the RUU.exe and get up to the point where the phone shows the gray screen with the %bar. But it stays at 0% and after a few minutes a get Error 262.
I have already re-flashed to my stock ROM, but same results.
Touch (Sprint)
ROM: 3.03.651.4
Radio: 3.42.30
WinMo 6.1
Update:
I have tried on Windows 7 Pro 32-bit, and on Windows XP Pro 32-bit. Same results....
Try this...
I'm sure the thread will be locked and you'll be told to ask in the FAQ's thread or something, but I hate when that's the only thing you get... not helpful enough! So maybe I can sneak in before the lock.
I had this problem a week ago, and for whatever reason, the only thing that worked for me was: 1st, flashing to the latest stock ROM (which you already have), then turning on the phone and letting it connect to Windows Mobile Device Center (Win7) or ActiveSync (WinXP) (do the whole 'connect without configuring device thing) then run the actual unlocker BAT file (Vogue_unlocker.bat) in the 2.31 unlocker.
Trying to manually run the EXE didn't want to work - letting the BAT file do it's thing through activesync actually worked for me.
Maybe it'll help... I hope so! Good luck!
NuAngel
NuAngel said:
I'm sure the thread will be locked and you'll be told to ask in the FAQ's thread or something, but I hate when that's the only thing you get... not helpful enough! So maybe I can sneak in before the lock.
I had this problem a week ago, and for whatever reason, the only thing that worked for me was: 1st, flashing to the latest stock ROM (which you already have), then turning on the phone and letting it connect to Windows Mobile Device Center (Win7) or ActiveSync (WinXP) (do the whole 'connect without configuring device thing) then run the actual unlocker BAT file (Vogue_unlocker.bat) in the 2.31 unlocker.
Trying to manually run the EXE didn't want to work - letting the BAT file do it's thing through activesync actually worked for me.
Maybe it'll help... I hope so! Good luck!
NuAngel
Click to expand...
Click to collapse
Oh come on Nu!
Unlike most other mods, I don't simply lock the thread. I lock it and/or transfer it to the Q&A thread where I answer the question myself. Please don't say these things. I try to keep the Vogue apart from the usual MO in several other fora.
I do it for 2 reasons:
a. To keep clutter to a minimum
b. To have a nice db with solutions to many issues that people may have with their Vogues. Trust me that the Search Engine of this site works much better when you look through a single thread than when you look for threads.
@caquito07,
I am transferring your question over to the Flashing Guide Sticky thread. Please follow up over there.
@Nu,
One last thing... thanks for stepping in
Thread closed.
everytime i plug it in using my otg cable that came with my IBASSO D-ZERO dac/pre-amp my phone just dies.. i have to unplug it from my phone for it to stop looping on start up. now i patched my device to latest firmware and then rooted using the methods found here i also cleared my phone cache/devik and did a system restore with the same issue.
has anyone come across anything remotely like this it be appreciated if anyone has any feedback.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Hey People.
I am wondering if anyone could take a second look at my problem. I have had a lot of help from the forum from HTCNerdYoda and i feel guilty for taking up so much of his time and expertise.
Basically I guess my iniitlal unroot attempt went wrong in some part. Now although Rootchecker states i am not rooted. I have files lingering connected to SuperSu....I have been advised the files i need to flash to the phone through boot loader, but i don't seem to be able to connect from my mac using./adb devices it says List of devices attached FA46MWM12742 Offline....i have tried powering down, rebooting, turning off the mac reconnecting....although the phone is on and connected still saying Offline and been trying for hours now.
Can I ask for a fresh set of eyes to cast a look and see if anyone can offer something i am not doing or missing.
thanking you in advance
There is no need to open another thread for the same problem. If anyone else want to help you, they will help you in the same thread.
Already answered here : http://forum.xda-developers.com/htc-one-m8/help/how-to-unroot-htc-one-m8-using-mac-t2859675/page8
Thread has been closed as there is already a thread open for this topic.
Many thanks,
Ghost