Related
This just happened about 24 hours ago to me. i noticed it says "unable to start wifi" also i think that affected my wireless tether.
My phone has the simple root done to it. I have Astro File Manager, ROM Manager, and like i said before i did the simple root with Unrevoked3. i am a mac user, i dont know if this second paragraph of information helps.
What should i do? should i just wait for the update to 2.2 that is supposed to be updated to my phone sometime soon? i tried restoring from an old backup and also tried to do a full system clean as well but still same thing. I am a newbie to this but i feel as though i have somewhat of a grasp on this.
Any suggestions or help would be greatly appreciated
You guys sure keep the mods busy around here.
Sent from my ADR6300 using XDA App
that suggestion didnt help
I feel your pain, most responses around here aren't helpful... just negative... you'd think that if someone took the time to reply they'd just share... typical forum behavior though.
I can’t seem to find a clear answer on this… some say it works, others say it’s broke.
*watching in hopes someone can help*
yeah i am just hoping i get the 2.2 update soon and it fixes it. so i am guess i am gonna have to wait until then and then take it from there. unless someone has some ground breaking suggestion. cause, i've been looking around and it seems like this is a problem thats been occurring as of recently.
Stu_Gotti said:
I feel your pain, most responses around here aren't helpful...
Click to expand...
Click to collapse
All I can say about this comment is wow...
Stu_Gotti said:
you'd think that if someone took the time to reply they'd just share... typical forum behavior though.
Click to expand...
Click to collapse
This post when I commented was in the development forum.
Sent from my ADR6300 using XDA App
please somebody help me... i am in Kahuutz
lorbocaust said:
please somebody help me... i am in Kahuutz
Click to expand...
Click to collapse
I have sky raider 2.5.2 and my wifi keeps trying to connect then obtain ip address then disconnects and keeps trying all over again why please?
so since nobody gave me any good feedback i decided to take on the task like a blank canvas.
Step 1: Reinstalled original Kernel
step 2: Full Data/Cache Wipe
step 3: reuploaded all of my data from last backup...
it appears everything is working fine.WIFI works great!!! I need to double check wifi tethering though. if anyone is interested i can repost if tethering is working.
Hi all,
started this thread for people like me that don't post much, that can't ask questions in the Dev section. Got to get my post counts up, lol! I've been a member on here from when the Samsung Moment came out, so I'm no newb to flashing rom's, etc. ' Just saying'. Been trying to flash TBOMB 5.0 from last night and can't get my phone to boot up for the life of me. It starts, hangs, then it crashes before it's completed. Yes, I did everything I needed to do. LIH firmware, Wipe caches, factory reset, re-downloaded the file (2x) even flashed to complete stock and started over(2x). Still no go. Many are having good luck with this rom, what am I doing wrong here? Thanks in advance, for any info that could get me on the right track....
Anyone else needing help with this rom, you're more than welcome to use this thread for questions. :good:
That's weird. Did you reset your counter to 0 (zero) before flashing? I'm not sure if it makes a difference but you can try. I flashed over the leaked version of JB, only wiped caché and data caché. Didn't do any Factory Wipe/Reset because it was not in the instructions. You only need to Reset if you had any problems/issues with the rom. Everything works fine so far. Try those steps and see what happens. But do a nandroid before flashing.
Not to be rude, but are you waiting long enough? I remember reading in that thread after 5 was released that the boot animation was just straight black screen. That after a few minutes of nothing, it boots. Also, 5.1 was released this afternoon. Try that out.
Sent from my SPH-L710 using Tapatalk 2
I have been having trouble with trying to switch my lock screen wall paper. Did a dirty flash
of 5.1 over JB 5.0. But this is only on the lock screen. My home screen will change with no problems. Also for some reason I can't open the gallery app. This isn't to big of a deal as I use Quickpic but idk if they are related problems. When I try to use QP to set the wall paper it just asks me to crop the pic and that's it. I am sure I am overlooking something and would appreciate any help. Thanks
Robbie Doo said:
That's weird. Did you reset your counter to 0 (zero) before flashing? I'm not sure if it makes a difference but you can try. I flashed over the leaked version of JB, only wiped caché and data caché. Didn't do any Factory Wipe/Reset because it was not in the instructions. You only need to Reset if you had any problems/issues with the rom. Everything works fine so far. Try those steps and see what happens. But do a nandroid before flashing.
Click to expand...
Click to collapse
Thanks for your response. Yes, I did a counter reset when I went back to stock LI3.
DLed the 5.1 version of the rom after I posted this, flashed my phone, and now I'm good to go.
My phone didn't like something in the 5.0 version of this rom, might have been the kernel, don't think I had 2 bad downloads of this rom(5.0)......
Now I have hands on, the niceness I've been reading about. Thanks to all of you hard working Dev's, that keep our phones going by bringing us all these goodies. :good:
mulhiny said:
Not to be rude, but are you waiting long enough? I remember reading in that thread after 5 was released that the boot animation was just straight black screen. That after a few minutes of nothing, it boots. Also, 5.1 was released this afternoon. Try that out.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Been thinking the same thing while I was trying at first, but it sure wasn't my wait time. Fell asleep waiting on it around 4:30am , woke up 4 hrs later, no go, lol! Had to leave the house for a while, so I flashed back to stock LI3, so I could have my phone working... 5.1 worked, like I posted before seeing your response. Thanks for responding.
Battery Icon - Signal Icon - Date
I just flashed 5.1 over 4.3 today. Install went great, phone is dramatically faster did great on benchmark.
The issue I am having is that the signal icon, battery icon, ringer icon, time Do not show up right away on reboot. then all of a sudden it will just show up.
This actually happened on 4.3 also. If anyone has any ideas that would be great, and not to wipe and re-flash. I understand that ultimately that may be required but I am not looking at doing that right now.
Thanks.
thirty5 said:
I just flashed 5.1 over 4.3 today. Install went great, phone is dramatically faster did great on benchmark.
The issue I am having is that the signal icon, battery icon, ringer icon, time Do not show up right away on reboot. then all of a sudden it will just show up.
This actually happened on 4.3 also. If anyone has any ideas that would be great, and not to wipe and re-flash. I understand that ultimately that may be required but I am not looking at doing that right now.
Thanks.
Click to expand...
Click to collapse
You tried fixing permissions from CWM? Might help....
7Dragon said:
You tried fixing permissions from CWM? Might help....
Click to expand...
Click to collapse
I am not running CWM i am using TWRP. I will check that to see if I can find something. But I really have no idea what I am looking for. I am kinda new to all this stuff.
It's in TWRP also, just an fyi. Should find it easily, once in there.....
I believe fixing permissions is under "Advanced".
Sent from my SPH-L710 using Tapatalk 2
I'm looking for help adding long press to volume key to advance to next track. I noticed other rooms have this but none rock like JellyBomb.
Rocking JellyBomb Thanks to Teem VeNuM on My Sprint S3 xda Premium
Yes, this rom is awesome. The only thing I'm having trouble with is wi-fi tethering. I guess with this version of JB it is not possible to run tethering. Anyone else out there?
I called sprint and added wifi hotspots for $10.00 .After they allowed it I went to system update. Updated prn and profile and it works. I hope this helped
Rocking JellyBomb Thanks to Teem VeNuM on My Sprint S3 xda Premium
Is anyone having issues with setting up the s voice wakeup commands? It's like the microphone is deaf. S voice works with everything else. Just not that. I'm gonna flash 5.1 as soon as it downloads. But just in case it still doesn't works, I'm asking this question.
General Jellybomb install
This might help a couple of you. I install JellyBomb 5.1 yesterday (first rom flash, yay!!) and loving it.
I used Clockwork Recovery. I installed the LIH modem (?) first as they said. Factory reset, wipe, cache and wipe richvishervi (?). Install of the rom itself couldn't have taken more than 20 mins, but I did get a boot animation (I believe it's the boot animation form the international version G3).
The only issue I had was that my google calender wouldn't sync. To get round this I deselected calender from the google account and added a account using Microsoft Exchange with my google details. That was a work around that has worked for me.
I think I also have a problem with wifi tethering but I haven't looked into it properly.
One question I will ask is; I'd like to have the lock screen that has the circular unlock feature but I'm not sure how to get it. Any help would be appreciated.
If anyone is on the fence about installing this rom, I'm VERY happy with it. It's very customizable, it fast and it has been very easy on the battery so far. Well done Josh Beach.
MjrCARNAG3 said:
This might help a couple of you. I install JellyBomb 5.1 yesterday (first rom flash, yay!!) and loving it.
I used Clockwork Recovery. I installed the LIH modem (?) first as they said. Factory reset, wipe, cache and wipe richvishervi (?). Install of the rom itself couldn't have taken more than 20 mins, but I did get a boot animation (I believe it's the boot animation form the international version G3).
The only issue I had was that my google calender wouldn't sync. To get round this I deselected calender from the google account and added a account using Microsoft Exchange with my google details. That was a work around that has worked for me.
I think I also have a problem with wifi tethering but I haven't looked into it properly.
One question I will ask is; I'd like to have the lock screen that has the circular unlock feature but I'm not sure how to get it. Any help would be appreciated.
If anyone is on the fence about installing this rom, I'm VERY happy with it. It's very customizable, it fast and it has been very easy on the battery so far. Well done Josh Beach.
Click to expand...
Click to collapse
Do you mean the lockscreen with the rings?
Exchange Account
I have an exchange account setup on this rom. Not all of my appointments are syncing over. Some are and some are not. I have my work schedule in outlook as an "all day event" but none of them are showing up. But other "all day" events are syncing over.
My gCalendar is sycing without a problem.
Anyone have any ideas???
Back4More402 said:
I called sprint and added wifi hotspots for $10.00 .After they allowed it I went to system update. Updated prn and profile and it works. I hope this helped
Rocking JellyBomb Thanks to Teem VeNuM on My Sprint S3 xda Premium
Click to expand...
Click to collapse
Why? You could download Easy Tether from Play Store and use it for free. Free version doesn't let you browse the secure sites but the paid version does. It works great.
Mobiono said:
Do you mean the lockscreen with the rings?
Click to expand...
Click to collapse
Yes. It has an unlock icon with the shortcuts to apps above, below, to the left and right.
Sent from my SPH-L710 using xda app-developers app
It's been said a few times that SELinux settings have an effect on mobile connection on some phones, not all, but some. Mine being one of them, that theory has also been criticized, ironically by those who's phones do not suffer from the issue. Anyways, if your trying a 4.4 ROM and have no APNs, no baseband, IMEI etc grab SELinux mode changer from the market, set to Permissive and be on your way. Why or what causes it is beyond me but changing to Permissive solves it. It takes a few seconds after boot for supersu permissions, a few seconds then for your APNs to be populated and baseband, after that you will get mobile connection working.
Hope this helps someone else fighting the same issues. Here's a video showing before and after, a little wait at the APN screen the second time for them to be populated. Also, sorry for the quality, just easier to record the screen directly compared to holding a camera.
[YOUTUBE]http://www.youtube.com/watch?v=V4HgbdDdemE[YOUTUBE] never can get YouTube to embed properly..
Ducter said:
It's been said a few times that SELinux settings have an effect on mobile connection on some phones, not all, but some. Mine being one of them, that theory has also been criticized, ironically by those who's phones do not suffer from the issue. Anyways, if your trying a 4.4 ROM and have no APNs, no baseband, IMEI etc grab SELinux mode changer from the market, set to Permissive and be on your way. Why or what causes it is beyond me but changing to Permissive solves it. It takes a few seconds after boot for supersu permissions, a few seconds then for your APNs to be populated and baseband, after that you will get mobile connection working.
Hope this helps someone else fighting the same issues. Here's a video showing before and after, a little wait at the APN screen the second time for them to be populated. Also, sorry for the quality, just easier to record the screen directly compared to holding a camera.
[YOUTUBE]http://www.youtube.com/watch?v=V4HgbdDdemE[YOUTUBE] never can get YouTube to embed properly..
Click to expand...
Click to collapse
Ducter.... you are such a life saver...if I could hit the thanks button 10000000000000000000000 times I would this 100% solved my problem....
So frusted w/ not being able to get data on 4.4 .....
Thank you!!!!
wondercoolguy said:
Ducter.... you are such a life saver...if I could hit the thanks button 10000000000000000000000 times I would this 100% solved my problem....
So frusted w/ not being able to get data on 4.4 .....
Thank you!!!!
Click to expand...
Click to collapse
Glad it was of help, just passing on what I have read and tried to make it easier to find so made a thread for it, some of us have the issue but appears the majority do not.
I had the issue initially when installed with twrp, did it once again with cwm, worked like a charm. Good info to keep in mind though.
anybody got the apk handy they can upload? flashed the latest cm nightly not knowing it was 4.4.1, and the store won't connect via wifi for whatever reason.. i'd rather not have to do a clean install to get my phone working again.
Thanks.
Nevermind, I managed to pull it from the woman's unrooted moto x. It's here if anyone else needs it..
Saved Everything
@Ducter : Your A F*cking King.
ThanX A Trillion.
Cgkingpin said:
@Ducter : Your A F*cking King.
ThanX A Trillion.
Click to expand...
Click to collapse
just out of curiosity. vAre you guys having any issues with the AOSP roms slowing down the data speeds? I know people have said for a long time since GB I think that the tw roms are much faster than AOSP I never saw that on HSPA+ but I am on simple moble and they just turnrd on their LTE and my phone gets an average of 28 down and 14 up. on tw roms but on AOKP or other AOSP roms it gets 8 up and 3 down. Like the lte is not working. Anyone else have these problems?
I love you.
Sent from my SGH-T889 using xda app-developers app
Thanks, you have saved me the headache of reverting back to stock and the time it would take to start all over from scratch. .
man i wish i knew this eariler. i wouldnt have gone stock then back to 4.4. thanks for the info!
Thanks finally found solution to my problem it was only happening to me with 4.4 PAC ROMs
Ok so first off, been using XDA for a while now to root various things, you guys have always got me what I need to get things figured out on my own, I have never before this day had to request help and for that, you guys are legendary.
Now I am semi newbi here, I know whats what for the most part but I have a hard time holding information in my short term memory so I am sorry if I miss little things
On to the problem!
So I got an AT&T LG Nitro HD P930, on ebay, I then spent the better part of a day rooting it, took me a lot of work but I eventually got it rooted and all that jazz, everything was going great... but everything changed when the fire nation... wait no... when I put CM9 on it, that crashed quite often, so I put on CM11 to check that out, no Data, so I rolled back one to CM10.2, and still no Data.
Could I have missed something?
Edit:
I thought at one point the ImeI might have gotten pushed out, but I double checked that and it is there, I have noticed at times I look at the service and it says I have 4 bars and an E next to it like back in the 2G days, but rarely and I have not had it stay long enough to test the data but if I get the chance I will edit and leave what happened here.
Also to note, I do still get random crashes but I can live with that.
P.S.S. XDA Devs are the shiznit, thank you guys for many years of amazing rom's and HP Touchpad support, my tablet is nothing without you guys!
Potential fix
Ok so admitadly I may have jumped the gun on not finding anything via the search function, I did find something digging around that might help me out. just incase anyone else checks this thread due to the same issue I will post back here if it worked, I found the fix on this thread
http://forum.xda-developers.com/showthread.php?t=2521525
Posted by Kaos420 about half way down.
Now to test it!
Issues "Unbricking"
So my second go around seems to be having trouble taking off, I cant seem to get the V10F to flash to my device following http://forum.xda-developers.com/showthread.php?t=1597488 exactly as it is. always just reboots into my old OS. Any advice?
Edit: Noticed I forgot to rename V10F correctly and tried again, seems to be running smoother, feel like a total noob...
Have you checked you apn settings ?
Fixed it
danilo96 said:
Have you checked you apn settings ?
Click to expand...
Click to collapse
I had read something about that and had a backup of my APN but it turns out you cant flash APN data after 4.0+ or some such nonsense.
In the end I managed to get the root to take hold after restoring it from unbrick up, now I have CM9 on it and it is working just shiny. so this thread can be deleted or closed or whatnot.
If anyone would like a step by step on what I did I would be glad to post it but I doubt anyone is interested.
Good thing you got it working. And CM9 was so nice and stable for the Nitro. I often think of reverting back to it just for its reliability.
Sent from my LG-P930 using XDA Free mobile app
AlphaD1 said:
If anyone would like a step by step on what I did I would be glad to post it but I doubt anyone is interested.
Click to expand...
Click to collapse
I would appreciate you doing that. I'm on CM11 with no data.
ShadowOf said:
I would appreciate you doing that. I'm on CM11 with no data.
Click to expand...
Click to collapse
Its been a while since I did it but I will see if I cant gather all the resources I used, but in the end what I had to do was re-brick it, reverted back to stock everything to recover and re-rooted it all again, then I just skipped CM11 and went back to CM10. Now I am in a whole new **** storm haha but thats a story for another time.
Q&A for [MOD] PrimeTether LG-D851 10C/10M
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
be careful
tarroyo said:
Can confirm that this mod is truly unlimited, I have a tether limit of 8gigs using this for 2 hrs I download 48+ gigs. Thanks @autoprime!
Click to expand...
Click to collapse
Thats a lot of data. I've gone as high as half that in a couple days. But some people have been saying that it's to obvious because your phone can't possibly burn through that much data. So eventually you might get dropped for violating the terms of use agreement. Idk. This is what I've been told. Just a heads up. That's allot. Plus I fear the day they do away with unlimited data because its used as a home internet service. ... Just saying... That's alot of fuggin data for two hours on a smartphone!! Haha lmao. See if you can hit a hundred!
I tethered my g3 with a playstation 4 and downloaded a full game to see if it would let me without hitting a limit, Thanks for the heads up. Have a few games to download in coming months I'll see if I can hit 100gigs.
esek23 said:
Thats a lot of data. I've gone as high as half that in a couple days. But some people have been saying that it's to obvious because your phone can't possibly burn through that much data. So eventually you might get dropped for violating the terms of use agreement. Idk. This is what I've been told. Just a heads up. That's allot. Plus I fear the day they do away with unlimited data because its used as a home internet service. ... Just saying... That's alot of fuggin data for two hours on a smartphone!! Haha lmao. See if you can hit a hundred!
Click to expand...
Click to collapse
When I enable the tether it still tells me "Verifying account" did it work?
Sent from my LG-D851 using XDA Free mobile app
My phone shows no data whenever I switch it to ipv4 anybody else having that issue?
data
I set everything up just as your instructions say and so far so good! I am however using skydragon rom with there kernal as a note. What im wondering is how do i tell the difference between using data and using hotspot data? How can i be 100% sure im not going to get a enormous bill at the end of this months cycle?
If you use prime thether mod and use a butt load of data t mobile can't do anything about it. There plan says UNLIMITED DATA! I know Netflix uses a lot, so it's hard for them to figure out on what your using the data for. I've gone as far as 90gb of data last month two months and nothing.
i cant seem to get this Mod to work. i switch roms switch modems. tried both, 10m and 10c and cant get it to work switch apn to Apn to APV4 and cant get it to work. i restarted my computer, my computer connects but there is no DATA coming thru, i tried with other devices, they connect but no data!. I Gave up.
Question. Is the tethering supposed to turn off automatically if it isn't being used? Never noticed this before but lately when I'm steaming to my tablet at work using this mod, if i pause what I'm watching the tethering is turned off. I'm usually gone about 15 minutes when it happens. No biggie i guess but i never noticed this before. Thanks.
SOAB. I just saw there was an option set by default to turn off after 10 minutes. Nm my Question.
Hey guys jusst switched from having samsung line up For many years.
Im having issues with flashing the 10m in twrp. I tried to dl it a few times.twrp keeps saying failed... I've read.and double checked i dl the right file..
This mod deserves a good donation 'i almist upgraded my hotspot untill i saw this ... Anyone gets a spare min i coukd use some help. Thanks
Great mod!! I just donated $5. Thanks!!!!
Sent from my LG-D851 using XDA Free mobile app
Anyone using a custom rom and still have the hot spot bypass?
I've been using the latest CM11 build, and I hit 270GB last month, so it's been working with other roms for me.
Is there a way to add a Hotspot Quick settings icon?
trouble flashing 10c
I have been trying to flash this mod for the last couple of days and get a failed message in twrp everytime. I tried renameing the file to simply "primetether.zip" but continued to get the same failed message. Any ideas of what i may be doing wrong? any help is appreciated. I am currently running the lonely rom 1.2
kix420 said:
I have been trying to flash this mod for the last couple of days and get a failed message in twrp everytime. I tried renameing the file to simply "primetether.zip" but continued to get the same failed message. Any ideas of what i may be doing wrong? any help is appreciated. I am currently running the lonely rom 1.2
Click to expand...
Click to collapse
Hay there I was the one who made that rom and 1.2 is pretty much pure stock + sd card kitkat fix so it shouldn't be on the rom side. If you have any xposed modules running I bet it is the problem or outdated twrp. Try to update twrp with twrp manager from the play store and/or remove all xposed tweaks. If I can give you some advice unless you really like 10C the lonely rom you might want to find a new rom. Sadly I don't have the time and will not be able to update that rom (at least not in the next couple months). I am going to request it to be locked after I do some changes in the op.
Edit* I just remembered I have two 1.2 versions. the first 1.2 was up for about 4 hours before I took it down and turned it into 1.3 so if you have the version that has the 2g/3g/h/4g icons (no 4g lte because H is what tmobile calls 4g and lte is the only true 4g) it is now the 1.3 version and has changes that will not work with primetether. Simply dirty flash the corrected 1.2 over your current build and primetether should work. Quick link to the rom http://forum.xda-developers.com/tmobile-lg-g3/development/rom-lifes-stock-rooted-t2821821
Does any body know if this mod works with any 5.0 roms?
Sorry if this has been asked before, but is there a version of primetether that works with the stock lollipop coming soon?
no more tethering?
Yes I also ran in to this problem last night. No matter what Rom I use, the Tmobile screen pops up when I try to access my browser. What has happened? Has T-mobile found a way to stop AOSP tethering and prime tethering?
I just tried installing SR Remix and it still doesn't work.