Develop Bugs

Fastboot flashing HELP!

What are the commands for flashing a rom in fastboot?
Ive tried
Code:
fastboot flash ----.zip
?

Am doing this cause JOKERDROID4.2BUZZ.zip wont flash in clockwork mod 3.2.0.0 or 4.0.0.2. It flashes in 2.5.1.7 but boot loops. I am coming from cm7 what do you think?

You can only flash a particular partition with Fastboot, like /system /data, Recovery, boot etc. AFAIK, You cant flash a Zip ROM as is the case with CWM.
You can check the list of Fastboot Commands here:
http://android-dls.com/wiki/index.php?title=Fastboot
Also, you got 2.5.1.7? Where? AFAIK Wildfire only has 2.5.0.7. Anyway, you can use Fastboot to replace your CWM 3.x or 4.x with 2.5.0.7, then try flashing Jokerdroid. Also, make sure you are performing a wipe (Factory Reset / Wipe data in Clockworkmod)

Where can i get 2.5.0.7?
Cant remember where i got 2.5.1.7 the file name was 2.5.0.7 but cwm said 2.5.1.7?

It's there under Custom Recoveries:
http://forum.xda-developers.com/showthread.php?t=1029318

jokerdroid just bootloops!?

i have wiped and wiped cache and delvik!

Try Redownloading the ROM. Or, if you search the thread, there is one version which is clocked at 648MHz. Try that. Probably the high CPU clocks are not suiting your device.
EDIT: Scratch that. Its clocked at 710, so shouldn't cause an issue.

Well after boot looping 5 or so times it rebooted cwm then rebooted system and bootlooped once but the powered up? Wierd!

if you want to flash a .zip package:
fastboot update filename.zip
if you want to flash an img. file:
depending whether you want to flash a new recovery:
fastboot flash recovery filename.img
or a new ROM:
fastboot flash system filename.img
I do however strongly recommend erasing you current recovery before flashing a new one:
fastboot erase recovery
and do a full wipe (this will erase your data, recovery and system partitions)
fastboot erase system -w

[Q] Fastboot flash recovery

A quick question. I want to replace my AmonRa recovery with RMD recovery through fastboot. Do I fastboot erase recovery then fastboot flash recovery recovery.img? Or do I just flash the image directly?

fastboot flash recovery recovery.img safer way

There is no problem in deleting the old recovery before you flash a new one.

I thought that it would'nt overwrite the already present recovery if I flashed directly.
Anyways, I flashed RMD successfully (fastboot flash recovery recovery.img).

[Q] "failed installation" of ARHD 18.1

Hello,
Id appreciate any help with my problem:
After wishing to upgrade to JB from ARHD 9 (ICS), I flashed the correct Hboot and upgraded CWM to 5.8.4.0. However, when trying to flash the ARHD ROM, im getting a "failed installation" message after selecting the zip on the SD card. I thought it might be the boot.img i was using (from the download section), so used the one from the ROM zip instead. No luck. I erase the cache etc very time I can.
Any ideas to what might be the problem?
Thanks in advance

so you have a hboot 1.3* and you flashed the boot.img with fastboot command
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
then entered recovery and did a FULL wipe (also dalvik cache under the advanced tab)
then trying to install the rom.zip ?
install failed, redownload the rom, might be corrupted !

Mr Hofs said:
so you have a hboot 1.3* and you flashed the boot.img with fastboot command
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
then entered recovery and did a FULL wipe (also dalvik cache under the advanced tab)
then trying to install the rom.zip ?
install failed, redownload the rom, might be corrupted !
Click to expand...
Click to collapse
exactly - all steps followed. currently downloading it again...

Boot loop - flashing via fastboot works, adb does not.

Okay, so I tried my best to search the forums and read the Q+A first, but the suggestions I've found so far didn't help me solve my problem.
I started with Hasoon200's tool kit and successfully unlocked the boot loader. Then, however, I got stuck at installing CWRM (it just wouldn't boot into recovery after installing). So I gave it a try with the "One X one Click" tool kit. I downloaded the n3okernel v34 and -modules as well as the newest nightly build of Cyanogen Mod (cm-10.1-20130414-NIGHTLY-endeavoru).
Now my HOX is caught in a boot loop. No matter which option I choose (fastboot / hboot, recovery, factory reset), it'll always go to the white HTC screen and stay there. Since Q+A's Q11 mentions it: yes, the last time I could boot into the OS (then still the stock image) I disabled fast boot in power settings.
Currently I can only access my HOX via fastboot, I already got a stock image and extracted the boot + recovery images, which I then flashed with the fastboot utility, as suggested in the Q+A's Q9. I erased the cache and rebooted to no avail. I also tried the firmware executable (RUU_ENDEAVOR_U_ICS_40_O2_DE_1.26.207.2_Radio_1.1204.90.13_release_251288_signed) to no avail.
Q+A's Q15 suggests sideloading via adb, but adb won't recognize my device.
I've also relocked the bootloader, this was suggested in another online ressource after flashing the stock boot+recovery images.
The phones HBOOT Version is 1.36.0000. I've noticed a different radio version than the one mentioned in my downloaded RUU; phone says 5.1204.162.29, downloaded file says 1.1204.90.13. I've not yet found a working download link with the right version number.
Please help.

Unlock it, make a full wipe in the custom recovery, install cm10.1, install gapps, flash the boot.img from the cm10.1 Rom and reboot.
So
Unlock it, flash a custom recovery (if you havent got one). If you still have trouble entering it you do this command in the bootloader
Fastboot erase cache

Mr Hofs said:
Unlock it, make a full wipe in the custom recovery, install cm10.1, install gapps, flash the boot.img from the cm10.1 Rom and reboot.
So
Unlock it, flash a custom recovery (if you havent got one). If you still have trouble entering it you do this command in the bootloader
Fastboot erase cache
Click to expand...
Click to collapse
Unlocking the bootloader works, but I'm not able to enter the recovery mode. It only shows a black screen (see attached picture).
EDIT: ok, wait... after flashing the clockwork recovery, I'm now getting into recovery mode. Will now try the next steps you suggested and give feedback later. Thanks a lot so far!

Press the Power and Volume down buttons which will take you the the hboot screen. From there select fastboot and flash a custom recovery like CWM via fastboot.
Now select hboot again and then select recovery!

Okay, so I successfully flashed CWM. I'm now able to boot into recovery. I also succeeded in flashing a boot.img which i took from cm-10.1-20130414-NIGHTLY-endeavoru.zip
c:\One\One\Data>fastboot flash boot boot.img
sending 'boot' (4960 KB)...
OKAY [ 0.684s]
writing 'boot'...
(bootloader) Format partition LNX done
OKAY [ 0.498s]
finished. total time: 1.186s
Now - when selecting hboot - the phone gets to another screen, the one where it displays the "HTC One" logo; I tried flashing the CM-image using fastboot (adb still doesn't work), but got following error message:
c:\One\One\Data>fastboot flash /sdcard update.zip
sending '/sdcard' (200098 KB)...
OKAY [ 25.507s]
writing '/sdcard'...
FAILED (remote: not allowed)
finished. total time: 25.716s
So close, yet so far...

So you have a working CWM installed right?
After flashing the boot.img... do "fastboot erase cache"
now go to CWM(recovery) and mount your sd card... copy the CM10ROM.zip and the gapps.zip to your HOX...
after that select wipe data and then wipe dalvic and cache...
Now select install zip from SD and install the ROM and then the gapps... reboot!

The problem is that I can't - or could'nt - transfer files any other way than using fastboot. However, I've now flashed Team Win TWRP2, and finally I'm able to access my phone over adb or just mount it and access it via explorer. Phew.

FINALLY!
So, if another noob like me finds this thread in the future...
After installing the TWRP2 recovery with flashboot flash twrp2.img, then booting into recovery and mounting my device, I was able to copy the CM-ROM-zip file onto the HOX. Then I rebooted into fastboot again and flashed the boot.img from aforementioned zip-file using "fastboot flash boot boot.img".
Booted again, selected the recovery system, installed ROM from zip file.
I'm getting too old for this ****. Almost had a heart attack when I thought I had bricked my phone. Thanks everyone for holding my hand, I appreciate it.

Good mate !
CASE CLOSED !

accidently deleted partition

yesterday I used parted to resize the partition on realme x, but I accidentally deleted the system partition and now can't boot into recovery mode or edl
Is there any way to recreate partition?

If you can boot to fastboot , flash recovery and rom again