Related
Hi Guys,
I have searched everywhere about this with no luck so have been forced to start a new thread...
I am running amon-ra v2.0.0 on my S-ON Desire.
I flashed the latest CWM that rom manager provides and it works... then i flashed this: http://forum.xda-developers.com/showthread.php?t=1039954
Cool, it worked. But when i reboot it goes back to amon-ra????
I am thoroughly confused..
any suggestions?
Did you use fastboot?
Flashing the .zip is only temporary, to permanently flash recovery you have to use fastboot to flash recovery-clockwork-3.0.2.8-bravo.img
http://forum.xda-developers.com/showthread.php?t=1039954&page=15
has some details.
Hi sorry, i should have mentioned that when i tried 'fastboot flash recovery recovery-clockwork-3.0.2.8-bravo.img' i got the following error...
sending 'recovery' (3036 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
you need to be S-OFF in order to flash recovery through fastboot (S-OFF disables signature checking in fastboot)
if you dont want to go s-off (it is easy, seriously) you can unroot, then while rooting again choose AmonRA in unrevoked.
I've been playing around with some of the JB ROMs, and was using Goo Manager and TWRP to do it. Then, because I'm an idiot, I decided I wanted to upgrade TWRP to 2.3.3.0 (I think I was running 2.3.1.0).
That's when I ran into the "TWRP doesn't always install properly" problem. I've now tried updating TWRP from within Goo Manager more than 5 times, but it's not working.
So I decided I'd install the new recovery via the FASTBOOT method.
I have HBOOT 0.92. I have ADB and FASTBOOT loaded on my laptop. (I'm pretty sure this is the way I originally installed CWM 5.0.2.0 when I first rooted my phone ages ago.)
When I boot the phone into the bootloader and choose FASTBOOT, then plug it into my laptop, I get the "FASTBOOT USB" indication that it's connected, so that's good.
However, when I open a terminal window on my laptop, navigate to my miniadb folder (where the fastboot.exe and recovery images are located), and try to flash the recovery image, I see the green bar in the upper right corner of the phone, but on the laptop I get this:
c:\miniadb>fastboot flash recovery openrecovery-twrp-2.3.3.0-inc.img
sending 'recovery' (3642 KB)... OKAY [ 11.235s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 11.268s
So then I decided to give up on TWRP and go back to CWM, but there's no joy there, either:
c:\miniadb>fastboot flash recovery recovery-clockwork-5.0.2.0-inc.img
sending 'recovery' (3064 KB)... OKAY [ 12.370s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 12.402s
What causes the "FAILED (remote: not allowed)" response? Clearly I'm sending the data to the phone, but the phone's rejecting it for some reason.
Does anyone have a suggestion for a foolproof way to get a recovery (either CWM or TWRP--at this point, I'm not picky!) back on my phone?
Thanks!
MC
Check the last two pages of the tarp thread for a twrp hboot PB31IMG.ZIP or see my direct link below.
http://goo.im/devs/tiny4579/mods/PB31IMG-TWRP-2.3.3.0.zip
This method works without fastboot.
Sent from my Galaxy Nexus using Tapatalk 2
Many thanks, tiny! I'll give that a shot.
MysticCobra said:
What causes the "FAILED (remote: not allowed)" response? Clearly I'm sending the data to the phone, but the phone's rejecting it for some reason.
Click to expand...
Click to collapse
For what it's worth, I think you need to upgrade HBOOT to 1.02 or 1.07 and unlock it through htcdev to be able to use the fastboot flash commands. But the flashable zip for TWRP should fix it for you too and that way is easier and just as reliable.
I just bought a rooted DInc2. I love it, and am slowly learning about. I don't know the method that the previous owner rooted the phone, but it is currently S-ON.
So, my question is: which method should I use to get it to S-OFF? I was looking at the Comprehensive S-OFF/Root Methods (http://forum.xda-developers.com/showthread.php?t=1751796), and it is not clear to me. Do I use the instructions, "Get S-OFF after using HTCDev Unlock", even if I don't know if the phone was rooted using HTCDev Unlock?
Here is info on my phone:
S-ON
HBoot 0.98.0000
Radio 1.09.01.0312
eMMC-boot
Firmware 6.01.605.05 710RD
Thanks for your help
Only way that I know for it to be still S on is through htcdev.com. Yeah use that guide.
Sent from my forgotten by HTC Droid Incredible 2. Rooted and Rommed by great minds at XDA that won't forget this phone.
Go into hboot and see if the device is unlocked or relocked?
Sent from my SCH-I535 using xda app-developers app
unlocked
It says "unlocked", so I will try the 2nd method. Thanks.
HELP!
So, I am going through the steps to Get S-OFF after using HTCDev Unlock. I made successfully (I think!) through flashing the zip file:
Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.3_Radio_1.09.01.0622_NV_VZW1.92_release_199487_si.zip
Everything was working as expected, so far...
Then I proceeded though these steps:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip 1.09.01.0312_vivow_Radio_PG32IMG.zip
but I get the following when I try to flash the above Radio zip file, which is copied directly from the command prompt window
C:\Android>fastboot flash zip 1.09.01.0312_vivow_Radio_PG32IMG.zip
sending 'zip' (13225 KB)... OKAY [ 3.425s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 6.232s
I tried re-flashing the Gingerbread zip, but same result. I am stuck at the black HTC screen, and not sure what to do next.
stuckinthedirt said:
So, I am going through the steps to Get S-OFF after using HTCDev Unlock. I made successfully (I think!) through flashing the zip file:
Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.3_Radio_1.09.01.0622_NV_VZW1.92_release_199487_si.zip
Everything was working as expected, so far...
Then I proceeded though these steps:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip 1.09.01.0312_vivow_Radio_PG32IMG.zip
but I get the following when I try to flash the above Radio zip file, which is copied directly from the command prompt window
C:\Android>fastboot flash zip 1.09.01.0312_vivow_Radio_PG32IMG.zip
sending 'zip' (13225 KB)... OKAY [ 3.425s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 6.232s
I tried re-flashing the Gingerbread zip, but same result. I am stuck at the black HTC screen, and not sure what to do next.
Click to expand...
Click to collapse
Redownload the file, then try.
Sent from my Droid Incredible 2 using Tapatalk.
Got it
Finally got the radio to flash. I copied it to my sdcard, and flashed it by starting up in bootloader. Got S-OFF via revolutionary, so mission accomplished!
stuckinthedirt said:
Finally got the radio to flash. I copied it to my sdcard, and flashed it by starting up in bootloader. Got S-OFF via revolutionary, so mission accomplished!
Click to expand...
Click to collapse
What steps did you take to flash it over from your sdcard once you started in bootloader?
jncryer said:
What steps did you take to flash it over from your sdcard once you started in bootloader?
Click to expand...
Click to collapse
I copied the radio to my sdcard, with the name PG32IMG.zip. When you reboot in bootloader, it prompts you to run that file.
Don't forget to delete or rename that file when you're done so it doesn't prompt you to run that file every time you go into your boot loader.
sent from my incredibly paranoid inc2
Jason, Thanks for the reminder!
Hello,
Im having reallly big problem with my Desire HD device and unfortunately,I realize this is only my fault and inadvertence. Im hoping that someone will help me with my problem...
First of all, I've had stock 2.3.5 on my device and every possible blockade. I've used Downgrade_v2 files (with adb and Gingerbreak and 1.32 stock android) but it wasn't working as it supossed to do. I've found nice tool to unblock DHD, called EasyAceRootTool. Everything went OK, new H-Boot was uploaded, unblock process went smoothly, Revovery Touch was uploaded to DHD as well, Superuser was installed too.
And at this level I've hurried too much, because I've installed by recovery new rom on Android 4.0.4 , this one : http://forum.xda-developers.com/showthread.php?t=1839004
And of course... I know now iVe forgot to make S-OFF, android doesn't start, nothing happens at all....
My Hboot now says :
Hboot :
***Relocked***
ACE PVT SHIP S-ON RL
HBOOT-2.0020029
RADIO -26.14.04.28_M
Ive tried a lot of soutions
1)Install PD98IMG.zip on sdcard (2 different stock roms) but when Bootlader is checking image, it says, that newer android is already on device
2)Install RUU, It says that there is a problem with Hboot and i need to wait for upgrade
3)Install PD98IMG.zip (pulled out from stock RUU) by recovery, it says that this image is "bad"
4)Restore backed up adnroid from this thread http://forum.xda-developers.com/showthread.php?t=920876&highlight=hboot, from section "Install stock Vodafone ROM", but it didn't helped as well, it says MD5 checksum failed...
5) When im trying to unlock Hboot in EasyAceRootTool, it communicating with device, but then it says : "Your device is not recognized"
Please guys... what else should I do ??
ps. I know there's a lot of grammatic mistakes, sorry for that. I was trying to check what I was writing
You've relocked your bootloader. You need to re-unlock it. Also, each time after you flash a ROM, you need to extract the boot.img from the ROM zip and
Code:
fastboot flash boot boot.img
bananagranola said:
You've relocked your bootloader. You need to re-unlock it. Also, each time after you flash a ROM, you need to extract the boot.img from the ROM zip and
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
tried to do that in bootloader is fastboot mode, and it says :
C:\win>fastboot flash boot boot.img
sending 'boot' (2932 KB)... OKAY [ 0.496s]
writing 'boot'... INFOsignature checking..
FAILED (remote: signature verify fail)
finished. total time: 0.973s
peanek said:
tried to do that in bootloader is fastboot mode, and it says :
C:\win>fastboot flash boot boot.img
sending 'boot' (2932 KB)... OKAY [ 0.496s]
writing 'boot'... INFOsignature checking..
FAILED (remote: signature verify fail)
finished. total time: 0.973s
Click to expand...
Click to collapse
Like I said, you relocked your bootloader. First you need to re-unlock your bootloader.
bananagranola said:
Like I said, you relocked your bootloader. First you need to re-unlock your bootloader.
Click to expand...
Click to collapse
Sorry, I haven't read properly
C:\win>fastboot flash unlocktocken Unlock_code.bin
sending 'unlocktocken' (0 KB)... OKAY [ 0.014s]
writing 'unlocktocken'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.019s
It's an unlock coode made in HTCDev.com, with a signature of my handset...
Is your phone in fastboot mode?
bananagranola said:
Is your phone in fastboot mode?
Click to expand...
Click to collapse
OK, there was a trivial bug, I've wrote unlocktocken instead of unlocktoken it is working now !!
Thanks man, I was fighting with this device for more than whole week, thanks for your help
peanek said:
OK, there was a trivial bug, I've wrote unlocktocken instead of unlocktoken it is working now !!
Thanks man, I was fighting with this device for more than whole week, thanks for your help
Click to expand...
Click to collapse
Ok, Im having other problem, tried to use fastboot flash boot boot.img, everything went OK, file was sended, but nothing happens, Hboot is still 2.00.0029, tried to use RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed, but after reboot, when i see HTC on black screen, when RUU should send new update, error is occured.
PD98IMG.zip on sdcard can't install too.
peanek said:
Ok, Im having other problem, tried to use fastboot flash boot boot.img, everything went OK, file was sended, but nothing happens, Hboot is still 2.00.0029, tried to use RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed, but after reboot, when i see HTC on black screen, when RUU should send new update, error is occured.
PD98IMG.zip on sdcard can't install too.
Click to expand...
Click to collapse
The boot.img isn't the bootloader. You need to flash the ROM (not RUU), then fastboot flash the boot.img.
bananagranola said:
The boot.img isn't the bootloader. You need to flash the ROM (not RUU), then fastboot flash the boot.img.
Click to expand...
Click to collapse
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.277s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.750s
or 2 others zip with ROM I've downloaded. Hboot is unblocked for 100%
Wait, no. Flash the ROM from recovery. You can't flash zips like that in fastboot. You can flash ROM images, but it makes more sense for you to get a recovery and flash zips instead.
If you don't have a recovery, first you need to install one. If you have a rooted ROM, you can install a recovery from apps: ROM Manager for ClockworkMod, 4ext Updater apk (from 4ext's website) for 4ext, and GooManager for TWRP. If you don't, download a recovery.img and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
.
If you do, just go straight to flashing the zip from recovery. Then,
Code:
fastboot flash boot boot.img
.
bananagranola said:
Wait, no. Flash the ROM from recovery. You can't flash zips like that in fastboot. You can flash ROM images, but it makes more sense for you to get a recovery and flash zips instead.
If you don't have a recovery, first you need to install one. If you have a rooted ROM, you can install a recovery from apps: ROM Manager for ClockworkMod, 4ext Updater apk (from 4ext's website) for 4ext, and GooManager for TWRP. If you don't, download a recovery.img and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
.
If you do, just go straight to flashing the zip from recovery. Then,
Code:
fastboot flash boot boot.img
.
Click to expand...
Click to collapse
OK, first of all, I'm having recovery, 5.8.7.2 Touch version that was installed with EasyAceRootTool.
I can't install any .apk, because I have now installed 4.0.4 rom, and because of S-ON, it will not start. I was trying to install few roms from recovery of course (Stock versions downloaded from xda, 1.32 versions and 2.3.5.), but every time I am doing this, revovery give me a error "installation aborted (bad)" it's from a PD98IMG zip downloaded from xda and rom.zip pulled out from "RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed"
When I am trying to do in fastboot mode :
Code:
fastboot flash system system.img
(system.img from stock roms, they are uploading, says OK for writing, but when I reboot phone, I see green HTC on white screen, then black screen, and then everytime phone reboots in recovery.
Few minutes a go i tried :
Code:
fastboot eease cache
fastboot oem rebootRUU
fastboot flash zip PD98IMG.zip
but every time it says :
Code:
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.215s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.713s
peanek said:
OK, first of all, I'm having recovery, 5.8.7.2 Touch version that was installed with EasyAceRootTool.
I can't install any .apk, because I have now installed 4.0.4 rom, and because of S-ON, it will not start. I was trying to install few roms from recovery of course (Stock versions downloaded from xda, 1.32 versions and 2.3.5.), but every time I am doing this, revovery give me a error "installation aborted (bad)" it's from a PD98IMG zip downloaded from xda and rom.zip pulled out from "RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed"
When I am trying to do in fastboot mode :
Code:
fastboot flash system system.img
(system.img from stock roms, they are uploading, says OK for writing, but when I reboot phone, I see green HTC on white screen, then black screen, and then everytime phone reboots in recovery.
Few minutes a go i tried :
Code:
fastboot eease cache
fastboot oem rebootRUU
fastboot flash zip PD98IMG.zip
but every time it says :
Code:
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.215s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.713s
Click to expand...
Click to collapse
What are you trying to do?? If you have an unlocked bootloader a RUU will never flash. Besides, being S-ON requires the specific RUU for your device.
If you have CWM and an unlocked bootloader, you can flash any custom rom in recovery but need to flash boot.img after flashing the rom.
You can't flash apks in recovery, only zips. Then fastboot flash the boot.img.
bananagranola said:
You can't flash apks in recovery, only zips. Then fastboot flash the boot.img.
Click to expand...
Click to collapse
glevitan said:
What are you trying to do?? If you have an unlocked bootloader a RUU will never flash. Besides, being S-ON requires the specific RUU for your device.
If you have CWM and an unlocked bootloader, you can flash any custom rom in recovery but need to flash boot.img after flashing the rom.
Click to expand...
Click to collapse
Ok, I was trying to put this device on feet, because it wasn't load any ROM I was flashing. There's a lot of tools and tutorials that I was reading before flashing DHD on xda and other forums. I was convinced, that I need S-OFF to use custom ROM. Few minutes a go I flashed Sabsa-Prime ROM by Recovery, then i searched for boot.img in Sabsa_Prime_v16.0_By_AlirezaB.zip, flashed it in fastboot, anddddd tadaaam...Everythings working perfectly
Thank You gyus, I really appreciate your help !! I was really stuck on this device...
Best Regards !
I need help...NOOB!!!
Hi there i need help.. my phone is stuck on a relocked screen and i cant get it tp power up... i will post a pic so maybe someone can help me out asap...
good
hiii please help mee!!
peanek said:
Hello,
Im having reallly big problem with my Desire HD device and unfortunately,I realize this is only my fault and inadvertence. Im hoping that someone will help me with my problem...
First of all, I've had stock 2.3.5 on my device and every possible blockade. I've used Downgrade_v2 files (with adb and Gingerbreak and 1.32 stock android) but it wasn't working as it supossed to do. I've found nice tool to unblock DHD, called EasyAceRootTool. Everything went OK, new H-Boot was uploaded, unblock process went smoothly, Revovery Touch was uploaded to DHD as well, Superuser was installed too.
And at this level I've hurried too much, because I've installed by recovery new rom on Android 4.0.4 , this one : http://forum.xda-developers.com/showthread.php?t=1839004
And of course... I know now iVe forgot to make S-OFF, android doesn't start, nothing happens at all....
My Hboot now says :
Hboot :
***Relocked***
ACE PVT SHIP S-ON RL
HBOOT-2.0020029
RADIO -26.14.04.28_M
Ive tried a lot of soutions
1)Install PD98IMG.zip on sdcard (2 different stock roms) but when Bootlader is checking image, it says, that newer android is already on device
2)Install RUU, It says that there is a problem with Hboot and i need to wait for upgrade
3)Install PD98IMG.zip (pulled out from stock RUU) by recovery, it says that this image is "bad"
4)Restore backed up adnroid from this thread http://forum.xda-developers.com/showthread.php?t=920876&highlight=hboot, from section "Install stock Vodafone ROM", but it didn't helped as well, it says MD5 checksum failed...
5) When im trying to unlock Hboot in EasyAceRootTool, it communicating with device, but then it says : "Your device is not recognized"
Please guys... what else should I do ??
ps. I know there's a lot of grammatic mistakes, sorry for that. I was trying to check what I was writing
Click to expand...
Click to collapse
In short, I'm trying to factory reset the phone to it's default settings, but every attempt is met with a failed attempt. Here's the specs
HTC Incredible
Android 2.2
Locked
S-ON
Hboot 1.02.000
Software: 3.26.605.1
Baseband: 2.15.00.07.28
Upgrading using the RUU file, PB3120000_Incredible_C_hboot_1.02.0000_4.08.605.2.exe, does nothing because even when it says it succeeds, the software version is the same. Tried the PB31IMG.zip method doesn't work because I get the error, "Main version is older". Going into recovery mode and resetting from there does nothing either because that fails.
The closest method I've seen which resembles mine is from this thread, but because the phone is deactivated I can't access the market to download and install rom manager to fix what could be a corrupted recovery? On top of that, I spent over an hour working with SDK, and came to the conclusion that I'm out of my depth. If anyone could point me in the right directions.
Edit: Figured out I had the wrong zip file so when I finally got it to update to 4.08.605.2 image, the boot screen is stuck at "HTC Incredible" splash screen, so I'm to assume I bricked it?
S_K_I said:
In short, I'm trying to factory reset the phone to it's default settings, but every attempt is met with a failed attempt. Here's the specs
HTC Incredible
Android 2.2
Locked
S-ON
Hboot 1.02.000
Software: 3.26.605.1
Baseband: 2.15.00.07.28
Upgrading using the RUU file, PB3120000_Incredible_C_hboot_1.02.0000_4.08.605.2.exe, does nothing because even when it says it succeeds, the software version is the same. Tried the PB31IMG.zip method doesn't work because I get the error, "Main version is older". Going into recovery mode and resetting from there does nothing either because that fails.
The closest method I've seen which resembles mine is from this thread, but because the phone is deactivated I can't access the market to download and install rom manager to fix what could be a corrupted recovery? On top of that, I spent over an hour working with SDK, and came to the conclusion that I'm out of my depth. If anyone could point me in the right directions.
Edit: Figured out I had the wrong zip file so when I finally got it to update to 4.08.605.2 image, the boot screen is stuck at "HTC Incredible" splash screen, so I'm to assume I bricked it?
Click to expand...
Click to collapse
If you can get to hboot, its not bricked. Have you tried a factory reset from hboot since doing the update?
cmlusco said:
If you can get to hboot, its not bricked. Have you tried a factory reset from hboot since doing the update?
Click to expand...
Click to collapse
Yes, I can get to hboot, and unfortunately doing a factory reset from there didn't work either? What are my options now you think, since I ran out of ideas a while ago.
S_K_I said:
Yes, I can get to hboot, and unfortunately doing a factory reset from there didn't work either? What are my options now you think, since I ran out of ideas a while ago.
Click to expand...
Click to collapse
So am I out of options at this point, because I've exhausted every resource I could find.
S_K_I said:
So am I out of options at this point, because I've exhausted every resource I could find.
Click to expand...
Click to collapse
Try this ruu thru hboot http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip. If that dosent work i would unlock your bootloader with http://htcdev.com/bootloader. Then flash a custom recovery. Then from recovery try to do a full wipe and a flash of a rom.
How do I get access to the sim card from my computer and install the zip if the phone won't boat? Or is there a way I can still do this through hboot?
S_K_I said:
How do I get access to the sim card from my computer and install the zip if the phone won't boat? Or is there a way I can still do this through hboot?
Click to expand...
Click to collapse
Well to put the PB file on the sdcard you would need to remove it from the phone, and then use a pc to put the file on there. You would most likley need an adapter, as most card readers dont do micro sd. However you can use fastboot to flash a pb file. Place the PB file on your pc in the same folder as fastboot.exe. Then type the folowing one at a time.
Code:
fastboot oem rebootRUU
Code:
fastboot flash zip PB31IMG.zip
Also unlocking the bootloader, and flashing a recovery only requires the use of fastboot.
EDIT: I guess i should have asked first if you have fastboot adb and their drivers setup on your pc? And if you know how to use them?
Sorry bout not mentioning I'm still a noob at this but for the most part I'm pretty tech savvy (just with iphones shhhh), I was in the middle of updating my progress, and I just finished installing SDK and recovery-clockwork-5.0.2.0-vivo.img, so now after installing the PB zip udate I got this message, "Failed (remote: 99 unknown fail)". What version of PB is this anyways?
S_K_I said:
Sorry bout not mentioning I'm still a noob at this but for the most part I'm pretty tech savvy (just with iphones shhhh), I was in the middle of updating my progress, and I just finished installing SDK and recovery-clockwork-5.0.2.0-vivo.img, so now after installing the PB zip udate I got this message, "Failed (remote: 99 unknown fail)". What version of PB is this anyways?
Click to expand...
Click to collapse
The latest 4.08.605.15. Wait that is not a correct recovery for this phone. So you are unlocked now? If so that is why the fastboot ruu failed, the bootloader must be locked.
Yea I googled it not too long ago and figured that out. So what's the right version then?
S_K_I said:
Yea I googled it not too long ago and figured that out. So what's the right version then?
Click to expand...
Click to collapse
CWM - http://dinc.does-it.net/Recoveries/CWM_5.0.2.0/
Or
TWRP - http://dinc.does-it.net/Recoveries/TWRP_2.4.4.0/
I need to do some errands but I"ll be back in 30 minutes, Just letting you know in case you're waiting on me, but irregardless thanks for the help so far and I apologize having to put up with me. Bueno, ttys..
OK, I think I just made things worse. First off, I didn't know I shouldn't of unlocked it because now I instead of getting that error 99 when trying to mount the PB, I get the message saying, "bootloader err command error !!!" after I enter "fastboot oem rebootruu". And trying to mount it while it's unlocked I get the message, "FAILED (remote: not allowed)". Sad face all around. Also, those 2 links you gave me are broken or just aren't working for me, so I'll try to find other links in the mean time. But as far as re-locking the phone, I still get the same messages as above.
S_K_I said:
OK, I think I just made things worse. First off, I didn't know I shouldn't of unlocked it because now I instead of getting that error 99 when trying to mount the PB, I get the message saying, "bootloader err command error !!!" after I enter "fastboot oem rebootruu". And trying to mount it while it's unlocked I get the message, "FAILED (remote: not allowed)". Sad face all around. Also, those 2 links you gave me are broken or just aren't working for me, so I'll try to find other links in the mean time. But as far as re-locking the phone, I still get the same messages as above.
Click to expand...
Click to collapse
You can relock by typing in fastboot
Code:
fastboot oem lock
Or your saying you already tried that and it have an error?
The links should be working again.
---------- Post added at 10:34 PM ---------- Previous post was at 10:29 PM ----------
Wait, does your hboot still have the same info you posted earlier as far as software version and baseband? In othet words are you still on android 2.2? And do you have a working recovery now?
C:\Android>fastboot oem rebootruu
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.006s]
finished. total time: 0.009s
C:\Android>fastboot flash zip PB31IMG.zip
sending 'zip' (3064 KB)...
OKAY [ 0.535s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.965s
This is while it's relocked btw.
S_K_I said:
C:\Android>fastboot oem rebootruu
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.006s]
finished. total time: 0.009s
C:\Android>fastboot flash zip PB31IMG.zip
sending 'zip' (3064 KB)...
OKAY [ 0.535s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.965s
This is while it's relocked btw.
Click to expand...
Click to collapse
The RUU has to be capital letters in that first command. (fastboot rebootRUU)
Try with this one http://dinc.does-it.net/Stock_Images/4.08.605.2/PB31IMG.zip, i forgot that last one was built and not official.
S_K_I said:
C:\Android>fastboot oem rebootruu
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.006s]
finished. total time: 0.009s
C:\Android>fastboot flash zip PB31IMG.zip
sending 'zip' (3064 KB)...
OKAY [ 0.535s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.965s
This is while it's relocked btw.
Click to expand...
Click to collapse
I got 4.08.605.2 installed, with radio 2.15.10.12.20. And if I understand you correctly regarding the recovery, I got clockwork installed and working.
S_K_I said:
I got 4.08.605.2 installed, with radio 2.15.10.12.20. And if I understand you correctly regarding the recovery, I got clockwork installed and working.
Click to expand...
Click to collapse
Well you could try thay ruu in the post above, or go to recovery, do a wipe, and flash a rom.
EDIT: To flash a rom thru recovery you would need to unlock again with the bin file.
---------- Post added at 10:50 PM ---------- Previous post was at 10:44 PM ----------
Lol we kind of have two different things going here, and they kind of conflict. So either stay locked and try that othet ruu, or unlock again and wipe and flash a rom with cwm.
Ok, it succesfully mounted that last image you linked to me. Only thing now after it finished on the command prompt, looking at the phone now and it's sitting there with the HTC logo, a black background, and a finished green bar. Should I just reboot it or keep waiting?
S_K_I said:
Ok, it succesfully mounted that last image you linked to me. Only thing now after it finished on the command prompt, looking at the phone now and it's sitting there with the HTC logo, a black background, and a finished green bar. Should I just reboot it or keep waiting?
Click to expand...
Click to collapse
Keep waiting, mabey for 10 15 min. It may take awile and reboot a few times.