Related
Here are simple guides for root, unroot, clockwork mod and cyanogen. I am not responsible for damaged or bricked phones. I used this to fix my bricked Ace. It saved it.
Root:
1. download the root.zip file attatchment.
2. boot recovery, click install zip from sd card, find root.zip
3. install and reboot.
4. congrats! you have now got root!
Unroot:
1. download the unroot.zip file attatchment.
2. place file on sd card
3. boot recovery, click install zip from sd card, find unroot.zip
4. install and reboot.
5. you have unrooted!
Clockwork Mod Recovery:
1. download the ClockWorkModAce.zip http://www.4shared.com/zip/0kBAQmX5/ClockWorkModAce.html
2. make sure you have used the root.zip.
3. place file on sd card
4. boot recovery, click install zip from sd card, find ClockWorkModAce.zip
5. reboot recovery and you will have Cwm recovery!
Cyanogen Mod:
MAKE A BACKUP!!!
1. do above
2. download cyanogenace.zip http://www.multiupload.com/MZLA2ECCQ0
3. put on sd card
4. boot recovery, click install zip from sd card, find cyanogenace.zip
5. install. this may take a while.
6. you now have cyanogen mod for ace!
already made thread
check sticky
mv_style said:
already made thread
check sticky
Click to expand...
Click to collapse
But that uses odin and that..... this is more simple for the less experienced users
On sticky dude...i use that without odin...averytime
regards,
•ƒγяύs ργяσ™• Line id: pyronia
read thread again
this is more simple IMO ...the sticky one is so confusing ..the first time i read it i don't even understand ..even now i am still little confused since i dunno whats odin
my phone does't boot up after clockwork mod ... stuk at samsung galaxy ace logo... how do i do...
and it doesn't enter download mode..
flash the custom rom cyanogenace but in the link it may be different name. i used this to fix my mobile
windcanning said:
my phone does't boot up after clockwork mod ... stuk at samsung galaxy ace logo... how do i do...
and it doesn't enter download mode..
Click to expand...
Click to collapse
This guy uses a GT-S5830i , which uses the MSM7227A chip
Herpderp Defy.
GT-S5830 ONLY
Sent from my GT-S5830 using XDA App
This might be a stupid question for some of you but what is "cyanogen mod" ?
Never heard. Thanks
Can someone give a link for cwm for s5830L. Or is there a need for specific one, can I go on with the link here? Please help. Searched all over but no luck.
Sent from my U20i using XDA App
gengi said:
This might be a stupid question for some of you but what is "cyanogen mod" ?
Never heard. Thanks
Click to expand...
Click to collapse
ddz334 said:
Can someone give a link for cwm for s5830L. Or is there a need for specific one, can I go on with the link here? Please help. Searched all over but no luck.
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Cyanogen is a 3rd party, modified OS for your phone. It replaces your current Operating System and gives you tons of benefits. I found it hard to use stock after using CM because of what it offers
Here's a link to the features http://www.cyanogenmod.com/about/features
but it does offer more than what's mentioned on that page.
--
And Link to ClockworkMod... http://forum.xda-developers.com/attachment.php?attachmentid=743333&d=1318051346
Thank you ryant22. I have a doubt Can I flash any rom from cwm? Is there any process of changing the kernel or unlocking the bootloader or must use of odin? for sony ericsson x10 mini pro I had to do all that, so just to confirm.... please help
flashed with custom rom. successful and happy. thanks to all once again
Just picked up a S5830 in the UK.
Out of the box the device came with:
Android 2.3.6 build XWKT5
Baseband S5830NEKT2
SuperOneClick 2.3.3 does not work on this build, and I need root to remove simlock.
Is the root method in the OP working on all S5830 versions, or specific baseband/rom?
*update* Tried it and confirmed working on above phone.
Also please include instructions for n00bs on how to get into recovery mode on a stock S5830.
"Hold home button and Power on"
In stock recovery select "apply update from sdcard"
I can't download the cyanogenmod zip file. It seems that the link is dead or something. Could anyone give me this file?
"cm-7.1.0-RC1-Cooper-KANG-10.10.11-Grif_07.zip"
Enviado desde mi GT-S5830L usando Tapatalk
rjosa said:
I can't download the cyanogenmod zip file. It seems that the link is dead or something. Could anyone give me this file?
"cm-7.1.0-RC1-Cooper-KANG-10.10.11-Grif_07.zip"
Click to expand...
Click to collapse
That's an old build you would be better using a more up to date KANG
e.g.
[ROM] The End 3.0 (Updated 18/02/2012) (CM 7.2 RC0 KANG)
Download: http://www.mediafire.com/?ogtfzzo1polq72o
ddz334 said:
Thank you ryant22. I have a doubt Can I flash any rom from cwm? Is there any process of changing the kernel or unlocking the bootloader or must use of odin? for sony ericsson x10 mini pro I had to do all that, so just to confirm.... please help
flashed with custom rom. successful and happy. thanks to all once again
Click to expand...
Click to collapse
Oh, i did the same switch. From the mini pro to the galaxy ace. i was suprised that the phone came with a recovery built in. From what i've lernt, the kernals are flashed during the process of flashing a rom
ryant22 said:
Oh, i did the same switch. From the mini pro to the galaxy ace. i was suprised that the phone came with a recovery built in. From what i've lernt, the kernals are flashed during the process of flashing a rom
Click to expand...
Click to collapse
Yeaah..kernels are flashed in while. Noted it.
Sent from my U20i using XDA App
How to unroot ???
Suppose if the phone in rooted (By the same method specified here ) & if I modify/delete a few system apps, how am I supposed to unroot it ? Will it work (Of course, by the method specified here ) ? How are the system apps restored, do I have to check & install each & every one of it manually ?
Hi,
I've been on the last hours reading a lot of tutorials in this forum to avoid to post what is already answered. But i'm still confused, maybe a good soul can help me out : )
So far, i installed GNex Toolkit and the drivers successfully and i can enter in recovery mode, so the Toolkit is correctly identifying my device,
but i did not choose any option yet.
I have a Nexus GSM with stock rom 4.0.2. My goal is to update to 4.0.3 so i can apply some mods to invert menus and google apps color ; i like to use the device with white font over black background and i can't do it with the stock version.
So here is my noob questions
1 - I've downloaded the Android Open Kang Project (AOKP) rom ; i found strange because it seem to be a Milestone 4 rom, is that correct ?
2 - Can i apply the rom directly or do i need to apply a 4.0.3 'stock' rom before it ?
3 - As far as i understood, to flash a new rom i will :
1 - Reboot my phone in recovery mode
2 - Open Toolkit, choose the option 7 to unlock bootloader and root, and then option 12 to flash the new rom.
Is this correct ?
I miss a tutorial specific for flash new roms with Toolkit...
Thanks
thefunkyjoint said:
Hi,
I've been on the last hours reading a lot of tutorials in this forum to avoid to post what is already answered. But i'm still confused, maybe a good soul can help me out : )
So far, i installed GNex Toolkit and the drivers successfully and i can enter in recovery mode, so the Toolkit is correctly identifying my device,
but i did not choose any option yet.
I have a Nexus GSM with stock rom 4.0.2. My goal is to update to 4.0.3 so i can apply some mods to invert menus and google apps color ; i like to use the device with white font over black background and i can't do it with the stock version.
So here is my noob questions
1 - I've downloaded the Android Open Kang Project (AOKP) rom ; i found strange because it seem to be a Milestone 4 rom, is that correct ?
Click to expand...
Click to collapse
Yes, that is correct.
2 - Can i apply the rom directly or do i need to apply a 4.0.3 'stock' rom before it ?
Click to expand...
Click to collapse
You can flash it at once... No need for flashing "Stock" 4.0.3.
3 - As far as i understood, to flash a new rom i will :
1 - Reboot my phone in recovery mode
2 - Open Toolkit, choose the option 7 to unlock bootloader and root, and then option 12 to flash the new rom.
Is this correct ?
Click to expand...
Click to collapse
Provided that your Phone is rooted, has an unlocked bootloader and you have a custom recovery like CWM: yes.
Look at MSKIPS thread (I assume you have his toolkit) for further guidance. Unlocking your Bootloader will wipe your data so if you want that saved you should make a backup.
Steps:
1. Unlock Bootloader
2. Root
3. Flash CWM Recovery
4. Wipe data/cache
5. Flash ROM
6. Flash GAPPS
7. Enoy
I miss a tutorial specific for flash new roms with Toolkit...
Thanks
Click to expand...
Click to collapse
you can use the inverted black google apps on stock too, thats what i do. Rooted on stock.
http://forum.xda-developers.com/showthread.php?t=1382163
RogerPodacter said:
you can use the inverted black google apps on stock too, thats what i do. Rooted on stock.
Click to expand...
Click to collapse
Where can i get these ? From where i downloaded, it says the ICS should be 4.0.3, my stock rom is 4.0.2...
Thanks !
Diger36 said:
Yes, that is correct.
You can flash it at once... No need for flashing "Stock" 4.0.3.
Provided that your Phone is rooted, has an unlocked bootloader and you have a custom recovery like CWM: yes.
Look at MSKIPS thread (I assume you have his toolkit) for further guidance. Unlocking your Bootloader will wipe your data so if you want that saved you should make a backup.
Steps:
1. Unlock Bootloader
2. Root
3. Flash CWM Recovery
4. Wipe data/cache
5. Flash ROM
6. Flash GAPPS
7. Enoy
Click to expand...
Click to collapse
I'm confused about step 3 ; after i unlock bootloader and root using Tookit, all i need is to boot in fastboot, then enter recovery mod, and select the rom's zipfile to install ? No need to do any fancy things ?
Thank you !
thefunkyjoint said:
I'm confused about step 3 ; after i unlock bootloader and root using Tookit, all i need is to boot in fastboot, then enter recovery mod, and select the rom's zipfile to install ? No need to do any fancy things ?
Thank you !
Click to expand...
Click to collapse
In MSKIPS Toolkit, just choose option 7, that is making all changes needed for flashing in one go (steps one to 3). After that: you'll be ready to rumble....
Read his FAQ from the second post. It explains everything. That is better then just pushing buttons what is simple but still..., teach a monkey a trick and he is still a monkey, tell him how it works and he can teach other monkeys...
From one monkey to another
thefunkyjoint said:
Hi,
I've been on the last hours reading a lot of tutorials in this forum to avoid to post what is already answered. But i'm still confused, maybe a good soul can help me out : )
So far, i installed GNex Toolkit and the drivers successfully and i can enter in recovery mode, so the Toolkit is correctly identifying my device,
but i did not choose any option yet.
I have a Nexus GSM with stock rom 4.0.2. My goal is to update to 4.0.3 so i can apply some mods to invert menus and google apps color ; i like to use the device with white font over black background and i can't do it with the stock version.
So here is my noob questions
1 - I've downloaded the Android Open Kang Project (AOKP) rom ; i found strange because it seem to be a Milestone 4 rom, is that correct ?
2 - Can i apply the rom directly or do i need to apply a 4.0.3 'stock' rom before it ?
3 - As far as i understood, to flash a new rom i will :
1 - Reboot my phone in recovery mode
2 - Open Toolkit, choose the option 7 to unlock bootloader and root, and then option 12 to flash the new rom.
Is this correct ?
I miss a tutorial specific for flash new roms with Toolkit...
Thanks
Click to expand...
Click to collapse
It's not the Motorola Milestone if you were wondering.
dario3040 said:
It's not the Motorola Milestone if you were wondering.
Click to expand...
Click to collapse
Lol.., didn't think about that... Could it be that OP .... ???
Before flashing the rom do a backup in recovery, just in case something goes wrong. Plus always good to keep a back up of your original stock rom
Sent from my Galaxy Nexus using xda premium
Just be aware when you unlock your boot loader that EVERYTHING on the phone will be erased so back up your files and store them on your pc
Don't worry brother, just read and reread and when you're ready get a cup of coffee and experience one of the most fun/intriguing things you can do with an Android phone.
Sent from my Galaxy Nexus using xda premium
dave83uk said:
Before flashing the rom do a backup in recovery, just in case something goes wrong. Plus always good to keep a back up of your original stock rom
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Do you refer to this procedure ?
http://galaxynexusroot.com/galaxy-nexus-recovery/how-to-backuprestore-rom-on-rooted-galaxy-nexus/
Doing this, even if a do a wipe, the backup will remains ?
Thanks !
After read and re-read, i'm ready to do it !
I enter the phone in Fastboot mode and started Toolkit. This is what i see in the screen :
FASTBOOT MODE
List of devices attached
0149C2251201100B fastboot
ADB MODE
List of devices attached
No devices attached for ADB Mode ; what i'm doing wrong ?
Thanks !
thefunkyjoint said:
After read and re-read, i'm ready to do it !
I enter the phone in Fastboot mode and started Toolkit. This is what i see in the screen :
FASTBOOT MODE
List of devices attached
0149C2251201100B fastboot
ADB MODE
List of devices attached
No devices attached for ADB Mode ; what i'm doing wrong ?
Thanks !
Click to expand...
Click to collapse
your good, keep going, select the firmware and then the steps to unlock, root, flash cwm, then just put the zip into ur phone, boot into cwm and choose backup. after backup do a wipe data and cache, then install zip. dont forget to flash thw gapps too
Sent from my Galaxy Nexus using xda premium
Kevin Ma said:
your good, keep going, select the firmware and then the steps to unlock, root, flash cwm, then just put the zip into ur phone, boot into cwm and choose backup. after backup do a wipe data and cache, then install zip. dont forget to flash thw gapps too
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Do i need to put the rom's zip in my root folder BEFORE unlock and root, or can i do it after ?
thefunkyjoint said:
Do i need to put the rom's zip in my root folder BEFORE unlock and root, or can i do it after ?
Click to expand...
Click to collapse
After, my man, as others have said, unlocking bootloader erases everything,
also, not just the rom zip, the newest gapps zip too
Sent from my Galaxy Nexus using xda premium
Kevin Ma said:
After, my man, as others have said, unlocking bootloader erases everything,
also, not just the rom zip, the newest gapps zip too
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Ok, thanks !
I've downloaded a special pack with gapps , with colors inverted. After i flash the new ROM, i follow the same procedure to flash the gapps ? All are in zip format. Is it the same procedure to flash a new theme ?
Very thank you for your kindness
thefunkyjoint said:
Ok, thanks !
I've downloaded a special pack with gapps , with colors inverted. After i flash the new ROM, i follow the same procedure to flash the gapps ? All are in zip format. Is it the same procedure to flash a new theme ?
Very thank you for your kindness
Click to expand...
Click to collapse
Yeah.., just flah them like you flash the ROM...
Not all apps are in the ZIP due to copyright issues. The rest (music/movie etc) you have to download from the market (play) or download elsewhere (they can be found in these forums or elsewhere on the net.
Thanks very much everybody for all the help, i could install my first customized ROM, AOKP. It's working, except because my PlayStore icon does not open anymore. I will look for help in the appropriate topic.
BIG THANKS : )
hi guys, a friend of mine had the Galaxy Y S5369 from Vodafone and it didnt had root for it. I decided to make a universal root zip for the Galaxy Y series running STOCK android 2.3.X .
This will work with the following models (maybe other Galaxy ones too, this a preatty universal method among Galaxy devices.You can try this on other modes on your own risk)
Samsung Galaxy Y series
- GT-S5360
- GT-S5360B
- GT-S5360L
- GT-S5360T
- GT-S5363
- GT-S5367
- GT-S5368
- GT-S5369
NOTE: if in recovery you get an error like CANT MOUNT SDCARD, CANNOT FIND /sdcard you need to format your sd into a card reader. Then retry.
NOTE THAT BY FLASHING THIS ZIP OR ANY OTHER FORM OF CUSTOM FIRMWARE, RECOVERY YOUR WARRANTY IS VOIDED. I, MYSELF OR ANY OTHER MEMBER OF XDA ARE NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR DEVICE. READ THE INSTRUCTIONS AND NOTE ALSO THAT YOU WILL FLASH THIS AT YOUR OWN RISK.
Click to expand...
Click to collapse
Instructions
-copy the zip to your SDCARD
-turn off the phone
-reboot into recovery (volume up+home+power)
-choose apply update from sdcard
-select from the sd the update.zip file
-reboot system now
-you are now rooted.
Download
zip updated
worked for GT-S5360T Gb 2,3,3
Worked on latest FW DXMI1 December 2013
andynroid said:
Worked on latest FW DXMI1 December 2013
Click to expand...
Click to collapse
thats good.
Unroot?
dany547 said:
thats good.
Click to expand...
Click to collapse
Dany, how we can unroot?
bysch said:
Dany, how we can unroot?
Click to expand...
Click to collapse
If you're using SuperSU:-
1. Open the app.
2. Go to the Settings tab.
3. Under Cleanup, tap on the full unroot. Tap Yes.
4. If your device is stuck on reboot, just pull the battery and insert it back.
Sent from my highly pimped Galaxy Pocket.
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
Hi,
I have a Samsung GS-S5360 with Android 2.3.6. After installing update.zip I see the "superuser" app installed. But when I open ES file Explorer setting root explorer to delete some apps, i get an error message "This function is not supported in your device".
Is maybe the superuser.apk an outdated version of the apk?
Thank you!
i have update it and superuser is installed but when am trying to unlock it. still says root your phone? s5369
ROOT & RECOVERY FOR GALAXY S3 NEO GT-I9300I (Jelly Bean 4.3)
Since we have now our own dedicated forums for S3 Neo, I'm splitting the "official" thread in dedicated threads for everyone to find information more easily. This is the thread for root and recovery for Jelly Bean 4.3.
Enjoy! :good:
Looking for 4.4.4? Click below:
http://forum.xda-developers.com/galaxy-s3-neo/development/root-samsung-galaxy-s3-neo-t2907189
======================================================================
Root for Jelly Bean 4.3 (GT-I9300I)
Use Towel Root v1: http://www.filedropper.com/tr_3
Only version 1 is known to work, so use the link provided to download. The version from the official site don´t work.
Please folow the easy steps below to root:
1 - Install tr.apk, run it and click "Make it ra1n" and wait for phone to reboot;
2 - Download Super SU zip file from the link below, extract it, copy Superuser.apk from "Common" folder to your phone, and install:
http://download.chainfire.eu/supersu
3 - Run Super SU, confirm the binary update and choose the NORMAL method.
4 - Reboot your phone.
5 - DONE!
======================================================================
TWRP & CWM Recovery for Jelly Bean 4.3 (GT-I9300I)
*original post by member alex.bat98
4pda.ru member usv translated CWM recovery to English. Recoveries are not compiled but assembled from similar phones.
Simply download the files attached in this post and flash them with Odin. Enjoy!
ClockworkMod Recovery 6.0.4.6
ClockworkMod Recovery 6.0.4.4 (Touch)
Team Win Recovery Project 2.7.1.0
Warning: If you have flashed TWRP, go to Settings and disable "Enable screen timeout".
----------------------------------------------------------------------
There are also some known bugs:
* Sometimes CWM backup date is wrong
* If you don't un-tick "Enable screen timeout" in TWRP, you'll have some issues with reboot.
----------------------------------------------------------------------
Root and recovery for kitkat
good work
Working!! Thanks heaps.
christianrj said:
ROOT & RECOVERY FOR GALAXY S3 NEO GT-I9300I (Jelly Bean 4.3)
Since we have now our own dedicated forums for S3 Neo, I'm splitting the "official" thread in dedicated threads for everyone to find information more easily. This is the thread for root and recovery for Jelly Bean 4.3.
Enjoy! :good:
Looking for 4.4.4? Click below:
http://forum.xda-developers.com/galaxy-s3-neo/development/root-samsung-galaxy-s3-neo-t2907189
======================================================================
Root for Jelly Bean 4.3 (GT-I9300I)
Use Towel Root v1: http://www.filedropper.com/tr_3
Only version 1 is known to work, so use the link provided to download. The version from the official site don´t work.
Please folow the easy steps below to root:
1 - Install tr.apk, run it and click "Make it ra1n" and wait for phone to reboot;
2 - Download Super SU zip file from the link below, extract it, copy Superuser.apk from "Common" folder to your phone, and install:
http://download.chainfire.eu/supersu
3 - Run Super SU, confirm the binary update and choose the NORMAL method.
4 - Reboot your phone.
5 - DONE!
======================================================================
TWRP & CWM Recovery for Jelly Bean 4.3 (GT-I9300I)
*original post by member alex.bat98
4pda.ru member usv translated CWM recovery to English. Recoveries are not compiled but assembled from similar phones.
Simply download the files attached in this post and flash them with Odin. Enjoy!
ClockworkMod Recovery 6.0.4.6
ClockworkMod Recovery 6.0.4.4 (Touch)
Team Win Recovery Project 2.7.1.0
Warning: If you have flashed TWRP, go to Settings and disable "Enable screen timeout".
----------------------------------------------------------------------
There are also some known bugs:
* Sometimes CWM backup date is wrong
* If you don't un-tick "Enable screen timeout" in TWRP, you'll have some issues with reboot.
----------------------------------------------------------------------
Click to expand...
Click to collapse
Please port the latest twrp to s3 neo
cm12 not running
Ahmad Tawfik said:
Please port the latest twrp to s3 neo
Click to expand...
Click to collapse
after running recovery mode in two methods ( cwm & twrp ) , I wipe cache ,system , data and cach dalvik then intall the cm12 for example and successfully downloaded .... but after restart system return to download mode directly ... so can any body help me to complete with my phone Galaxy S3 Neo GT-I9300I ?????????
aliamlb said:
after running recovery mode in two methods ( cwm & twrp ) , I wipe cache ,system , data and cach dalvik then intall the cm12 for example and successfully downloaded .... but after restart system return to download mode directly ... so can any body help me to complete with my phone Galaxy S3 Neo GT-I9300I ?????????
Click to expand...
Click to collapse
Check the official twrp website our device now have official twrp recovery
No problem if it is written GT-I9301I as it works also for GT-I9300I
Then try again
Sent from my GT-I9300I using Tapatalk
I tried via the official recovery from twrp but with every reboot it just boots to Odin mode.
Download Cm12 Here : https://download.cyanogenmod.org/?device=t0lte
Download gapps Here : https://s.basketbuild.com/gapps
Download Boot Converter e250l https://mega.co.nz/#!hlV2iT7I!ocIK9o37R0vXDh8lRi2YY9amYGrbEPx3WX6zu-gkjwk
Download E250l Modem https://mega.co.nz/#!c19hmZII!-egdPYfx7yhoeZTLOhQd7R8WGHMtgNsa1aHTcuRreHk
Download Super User https://mega.co.nz/#!1gVwHRjI!B8mffxj_hOA9xMGPOalpDrFjeBt9ytdfRs0FMC7A_5k
Copy All above Files in SD card
Boot Into Recovery
Clear Dalvik/Cache
Flash Files in above sequence
Clear Dalvik/Cache
Reboot Now your phone will boot successfully:good:
Now all things will work expect Camera
To enable camera Install terminal emulater and enter following command
su
sh etc/init.d/80cfw
Now you can install Google Camera or any other app which will work perfectly alright!:good:
If keyboard not work install any keyboard from playstore
All issues are resolved i.e WIFI
DEAD41 said:
Download Cm12 Here : https://download.cyanogenmod.org/?device=t0lte
Download gapps Here : https://s.basketbuild.com/gapps
Download Boot Converter e250l https://mega.co.nz/#!hlV2iT7I!ocIK9o37R0vXDh8lRi2YY9amYGrbEPx3WX6zu-gkjwk
Download E250l Modem https://mega.co.nz/#!c19hmZII!-egdPYfx7yhoeZTLOhQd7R8WGHMtgNsa1aHTcuRreHk
Download Super User https://mega.co.nz/#!1gVwHRjI!B8mffxj_hOA9xMGPOalpDrFjeBt9ytdfRs0FMC7A_5k
Copy All above Files in SD card
Boot Into Recovery
Clear Dalvik/Cache
Flash Files in above sequence
Clear Dalvik/Cache
Reboot Now your phone will boot successfully:good:
Now all things will work expect Camera
To enable camera Install terminal emulater and enter following command
su
sh etc/init.d/80cfw
Now you can install Google Camera or any other app which will work perfectly alright!:good:
If keyboard not work install any keyboard from playstore
All issues are resolved i.e WIFI
Click to expand...
Click to collapse
thanks mate.
I have installed the rom and its working great on my device.
BROKEN link
link 3, 4 and 5 is broken...
I'm trying this instruction now. (links worked)
After downloading TWRP from here offcourse.
**UPDATE**
OK, I flashed this because the origal ROM was having wifi connection issues.
After flashing I had the same issues, but after a couple of reboots and enabling and disabling wifi, it started working. After flashing I also had some issues using the keyboard, but after playing with the keyboard/input options that worked too. Camera worked right away so no need to excecute the terminal commands displayed above. I installed all the most used apps again and so far everything works like a charm.
I'll update this post if I run in to trouble again.
**UPDATE**
After running for a couple of days, Wifi issues are back. Wifi can be switched on, but no networks appear.
Rebooting doesn't help and phone reboots by itself very often. Weird that all these issues started after a couple of days.
How to flash cm12 rom
I use TWPR to flash cm12 rom, but cm12 rom is not surport for note 2 korean. it only for note 2 lte? or worng TWRP version? I already flash with TWRP 2.6 and TWRP 2.8 it not working !
not easy find and flash .
How to update new versions of cm12?
Unable to Flash Flash Cm12.1 Giving Media Error Please Some Body Help Me ?
In Recovery Mod when Ever I Install Zip From Sd Card And Chose cm12.1 it gives Error E: etc please help me i also Install TWRp recovery But vain currently i have insatalled 4.4.2 in my samsung Note 2 lte
I follow all of the steps but my phone samsung shv e250l boots back into normal koeran rom
Please advise what i am doing wrong
Phone is rooted and have tried both trwp 2.7.1/2
Sent from my LG-D722 using Tapatalk
Please upload the files again, 3, 4 and 5 link are dead.
3 files on the Mega Web were removed dear! Please upload these files again, thanks you!
I've rooted note 2 shv e250L via odin 3.07 and installed philzmod touch recovery. Now I want to know whether cm12.1 can be flashed over philzmod or I need twrp for that matter?
If I need twrp only for flashing then how to get rid of philzmod touch recovery?
Sent from my SHV-E250L using Tapatalk
HelHe
mubashirsaeed said:
thanks mate.
I have installed the rom and its working great on my device.
Click to expand...
Click to collapse
It has rom and recovery. Am I supposed to flash both?
OMG! I was needed it very much
Thanks! I will use it right away.
Thank you for great customrom!
Files DOWN
Hello,
the files uploaded on Mega are down.
Please reupload them. Thx.
niwo
links are broken