Related
Can someone do me a huge favour and upload the acersync apk from the latest 3.2.1? Pleeeeaasse! Im an idiot and uninstalled it....
Sent from my A100 using xda premium
Here it is
I was posted at CFB Cold Lake back in the mid-60s...
jschall said:
I was posted at CFB Cold Lake back in the mid-60s...
Click to expand...
Click to collapse
Thanks so much this is from the latest ota right?
Thanks again and cold lake is still cold
Sent from my HTC Vision using xda premium
Ok didn't work won't install.... gah...if I do a factory reset will it fix it?
Sent from my HTC Vision using xda premium
ptesmoke said:
this is from the latest ota right?
Click to expand...
Click to collapse
Well, I have 2.007.04, and that file was in /system/app. Unfortunately, I don't know any way of checking which version it is.
are you gen1 or gen2?
i dont understand why it wouldnt install, i found another apk through the a500 forums, which installs, but does not match the version i initially backed up. and when i try to install the one you attached it just says "installation failed"
i wouldnt think gen1 or gen2 would make a difference, but if you want to check the version of acer sync, if your rooted you can load up titanium backup and it will show you the version. im at work right now so i cannot check mine to post the version but i will after work.
if all else fails i should be able to factory reset and fix it....
ptesmoke said:
are you gen1 or gen2?
i dont understand why it wouldnt install, i found another apk through the a500 forums, which installs, but does not match the version i initially backed up. and when i try to install the one you attached it just says "installation failed"
i wouldnt think gen1 or gen2 would make a difference, but if you want to check the version of acer sync, if your rooted you can load up titanium backup and it will show you the version. im at work right now so i cannot check mine to post the version but i will after work.
if all else fails i should be able to factory reset and fix it....
Click to expand...
Click to collapse
Probably a dumb question but you ARE placing the .apk in the system/app folder before trying to install right?
Its a system app not a market app and thats where itll need to be done..
Make sure permissions are set properly too...
mdowns989 said:
Probably a dumb question but you ARE placing the .apk in the system/app folder before trying to install right?
Its a system app not a market app and thats where itll need to be done..
Make sure permissions are set properly too...
Click to expand...
Click to collapse
check and check, placing in /system/app and changing permissions to match all the other apps permissions...
i will give it another shot after work, maybe i was having a brain fart but im sure i was doing it right..
Ok so long story short, couldn't restore it, factory reset didn't fix it and then my home button stopped working. Downloaded the latest dycrypted 3.2.1 update from dev section, flashed and updated to latest ota. Everything perfect again. Rooted and got everything all back to my liking.
Word of advice...don't depend on titanium backup to save your system apps lol.
At least now I know how to flash the update.zip and keep it on my sdcard "just in case". Thanks for all the help though guys!
Cheers!
Sent from my HTC Vision using xda premium
Here is video to show how beasted I am on SF IV HD ... lol enjoy... hahhhaha
http://www.youtube.com/watch?v=XRKPFTJbfj0
How to Install Video
http://www.youtube.com/watch?v=rhZUM4JmU5U
ROM: VCS RL3
Chainfire 3D with Qualcom Plugin ...
Good one!! Where'd u get that apk? I found one on a google search but after installing/opening, won't download the resource files, says can't est. connection.
Anyway u can pm me where u got the game and how u got it to work
Sent from my SPH-D710 using Tapatalk
1stloc said:
Anyway u can pm me where u got the game and how u got it to work
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I'm working on it now, found a method that works for the E4GT, not too difficult. I'll post the solution soon if the op doesn't.
I'd also Love to know how you got it to work...I'm getting the same error (resource file downloading)...PLEASE HELP ME!!! I LOVE THIS GAME and like to be able to play it on my e4gt!! any help would be GREATLY APPRECIATED!!!
how did you get it to work
i got it to work but its white backgrounds all over
donsh00tmesanta said:
how did you get it to work
i got it to work but its white backgrounds all over
Click to expand...
Click to collapse
Install Chainfire 3D & use Qualcomm plugin to fix that
Sent from this phone
Install video
1stloc said:
Anyway u can pm me where u got the game and how u got it to work
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Follow instructions in this vid...it worked for me
http://www.youtube.com/watch?feature=player_embedded&v=47CBXOyn2n4
This is AWESOME... Thanks for the Video Link...
I can finally get my SF on....
You do have to get the PRO Version of ChainFire3D to install the Qualcomm Plugins... I did a search and got the plugins from here:
http://forum.xda-developers.com/showthread.php?t=1293134
Hope that helps someone...
Still not able to get it to work.. I'm on miui.us not sure if that helps.. I got tit back files pushed to sdcard/backup, SF data folder pushed to sdcard/SF_IV_data, install wvga 480x800 or w.e for our phone, open titanium backup touch backup/restore, preferences, switch to get backup from sdcard/backup, find SF in the list, here's where I run into problem with the instructions. It says wipe data, then restore, however it only gives option to wipe data and backup as if there was nothing to restore yet since it hasn't been backed up.. obviously if I do backup, then I can wipe data and restore but that's not what it says in the instructions. It says specifically wipe data hen restore.. any help? When loading game it said failed to connect but after playing with it got it to say the data is corrupted and it asks me to re download it but fails to connect. I have miui.us 2.1.13, titanium backup pro, I even have chainfire 3d pro with all the plugins from power to nvidia to qualcomm.. gta works perfect without chainfire.. let me know if you've ran into same issue and if so how you fixed it .. I hope the rom doesn't have anything to do with it..
Sent from my E4GT with MiUi!
Reboot after install.. then wipe then restore... worked for me..
Sent from my SPH-D710 using xda premium
z31k said:
Reboot after install.. then wipe then restore... worked for me..
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Will try right now! I'm assuming. Lear everything out n start from scratch then just reboot after installing then wipe n restore then run it.. ill let ya know if it does the job!
Sent from my E4GT with MiUi!
Ok, so I did try it.. I cleared everything out completely..
1) wiped data, deleted backup, uninstalled from tit back
2) rebooted
3) installed SF
4) moved tit back (3 files) to sdcard/titaniumbackup
5) restarted
6) found SF in tit backup and wipe data & restore
7) data already in /sdcard
8) restart again to be safe
9) run game = data on SD card corrupted re download? Which then fails lol..
Could it be that I downloaded all the files via my phone and used unrar to extract game data and astro to move folder to root of sdcard?
Sent from my E4GT with MiUi!
elliwigy said:
Ok, so I did try it.. I cleared everything out completely..
1) wiped data, deleted backup, uninstalled from tit back
2) rebooted
3) installed SF
4) moved tit back (3 files) to sdcard/titaniumbackup
5) restarted
6) found SF in tit backup and wipe data & restore
7) data already in /sdcard
8) restart again to be safe
9) run game = data on SD card corrupted re download? Which then fails lol..
Could it be that I downloaded all the files via my phone and used unrar to extract game data and astro to move folder to root of sdcard?
Sent from my E4GT with MiUi!
Click to expand...
Click to collapse
Make sure you're not opening the file after installing, I'm using calks 2.8.1 ROM btw & I didn't "clear" the data with tibu, just restored after files were in place. I feel your pain, but if you follow the steps in the video link I posted EXACTLY you'll be playing some SF! I tried a similar method close to the steps you listed and had problems..followed the instructions in the vid (including the site mentioned for d-loading the files) to the letter and BAM.. it worked..HADOKEN!
Sent from this phone
patrick_1 said:
Make sure you're not opening the file after installing, I'm using calks 2.8.1 ROM btw & I didn't "clear" the data with tibu, just restored after files were in place. I feel your pain, but if you follow the steps in the video link I posted EXACTLY you'll be playing some SF! I tried a similar method close to the steps you listed and had problems..followed the instructions in the vid (including the site mentioned for d-loading the files) to the letter and BAM.. it worked..HADOKEN!
Sent from this phone
Click to expand...
Click to collapse
Haha yea, I didn't run the game.. I went to approb, that's where I got te APk data files TB files etc.. I followed those steps exactly, some off thepiratebay and from another site.. so three different methods lol.. ill figure it out! I want it lol.. you know if it works with sixaxis?
Sent from my E4GT with MiUi!
elliwigy said:
Haha yea, I didn't run the game.. I went to approb, that's where I got te APk data files TB files etc.. I followed those steps exactly, some off thepiratebay and from another site.. so three different methods lol.. ill figure it out! I want it lol.. you know if it works with sixaxis?
Sent from my E4GT with MiUi!
Click to expand...
Click to collapse
Damn you've covered just about every approach man! Lol Keep pluggin' away, it'll happen! Haven't tried w/sixaxis yet, I've heard some are having issues with the controls not responding but I've been lucky, had zero problems so far.
Sent from this phone
patrick_1 said:
Damn you've covered just about every approach man! Lol Keep pluggin' away, it'll happen! Haven't tried w/sixaxis yet, I've heard some are having issues with the controls not responding but I've been lucky, had zero problems so far.
Sent from this phone
Click to expand...
Click to collapse
So tried what you suggested to just restore and not clear data and same issue lol. When I get it ill be a pro lol
Sent from my E4GT with MiUi!
elliwigy said:
So tried what you suggested to just restore and not clear data and same issue lol. When I get it ill be a pro lol
Sent from my E4GT with MiUi!
Click to expand...
Click to collapse
Yeah im in the same situation as you. Ive tried everything. I dont have the pro chainfire though it still lets me load plugins. Is there more to just loading plugins that i need to do that the pro will let me. Also, what version of chainfire is everyone using?
Edit: yeah ive tried everything to get it to work. I get the white background
chandlerw88 said:
Yeah im in the same situation as you. Ive tried everything. I dont have the pro chainfire though it still lets me load plugins. Is there more to just loading plugins that i need to do that the pro will let me. Also, what version of chainfire is everyone using?
Edit: yeah ive tried everything to get it to work. I get the white background
Click to expand...
Click to collapse
Lol yea.. I can't even get the white bg.. can you pm me the steps exactly you took to get the white screen? I can tell you where to get chainfire pro for free
Sent from my E4GT with MiUi!
Here's what I did to get it working:
1. Copy SF data to sdcard/SF_IV_data
2. Copy Tit back (3 files) to sdcard/titaniumbackup
3. Install ChainFire3D Pro
4. In ChainFire3D, install CF3D driver, it will reboot automatically
5. Go back to ChainFire3D, install Qualcomm Plugin
6. Still in ChainFire3D, go to Defaut OpenGL settings, Use plugin, and select the Qualcomm plugin you just installed.
7. Install SFIV apk, do not run
8. Go into Tit Backup, Backup/Restore, find and select SF IV, and select Restore
9. Start SF IV
Google Wallet Installer for Verizon, AT&T, T-Mobile, and US Cellular Samsung Galaxy S3.
Requires ROOT, an UNLOCKED BOOTLOADER, and BUSYBOX!(A deodexed ROM is just recommended)
My newest project, RemoteFlash, was just released! Take a look and give it a try!
Wallet Installer Is Now Available For Free To All Supported Carrier Models On XDA! (Donations Appreciated)
My application, "Wallet Installer", will install Google Wallet on almost any US based Samsung Galaxy S3. It simply edits your build.prop and then places the correct modifications into your system. It downloads all the files from my personal server, which is pretty quick. Just select the appropriate Rom type: AOSP, JB Touchwiz, or ICS TouchWiz, and then your carrier: Verizon, AT&T, T-Mobile, or US Cellular. I also added a restore option for your build.prop, so you can restore it after you setup Google Wallet. Hopefully this helps you out and makes the process easier!
Wallet Installer has been updated on the server side. The credit goes to Paul Obrien for the new version! To install it, simply reset Google Wallet, delete it, and then rerun Wallet Installer! Make sure to also have BusyBox installed/updated!
Please donate if my work helps you : )
V3: No Recovery/More Stable
Original Thread: Here
And as always: I take no responsibility for bricked devices, whether a soft brick or a full on brand new coffee coaster.
This sounds great except for the recovery flash. Does the app offer to skip this step so we can keep whatever recovery we may already have installed?
rozzco said:
This sounds great except for the recovery flash. Does the app offer to skip this step so we can keep whatever recovery we may already have installed?
Click to expand...
Click to collapse
Unfortunately, no. It has to use an open, unencrypted recovery to flash the files. I would allow use of CWM if it was unencrypted, but it's not. An option I am planning on adding in the future is the option to backup your current recovery and flash it after TWRP has been used.
Sent from my SCH-I535 using xda premium
Just tried it and it boots into twrp but nothing happens.
Sent from my Black Jelly I747 by graffixnyc theme by wanam ported and tweaked by David Dee
Phoneguy589 said:
Just tried it and it boots into twrp but nothing happens.
Sent from my Black Jelly I747 by graffixnyc theme by wanam ported and tweaked by David Dee
Click to expand...
Click to collapse
It sounds like you had a bad download. Go under your /sdcard partition and look for files like: "Wallet.zip", "recovery.img", "Fix.zip" and delete them(they shouldn't be there if they flashed correctly). After deleting those files, try again. Make sure you have a good data connection. Preferably WiFi.
Sent from my SCH-I535 using xda premium
Also, make sure you have busybox installed.
That's what it was...needed busy box installer. Worked great. I had the apk and files for libs but that was much better. Thank You, and nice work.
Sent from my Black Jelly I747 by graffixnyc theme by wanam ported and tweaked by David Dee
Phoneguy589 said:
That's what it was...needed busy box installer. Worked great. I had the apk and files for libs but that was much better. Thank You, and nice work.
Sent from my Black Jelly I747 by graffixnyc theme by wanam ported and tweaked by David Dee
Click to expand...
Click to collapse
No problem! I just hope more people give it a shot! It won't disappoint.
Sent from my SCH-I535 using xda premium
as soon as the recovery issue is ironed out, I'll give it a spin.
mdwbeex said:
as soon as the recovery issue is ironed out, I'll give it a spin.
Click to expand...
Click to collapse
Technically the open recovery isn't an issue, at least not development wise. I use it because there are different versions of CWM rolling around, and they aren't all capable of the same things. This way, with an open recovery flash, I greatly reduce the chance of bricking/other issues.
Sent from my SCH-I535 using xda premium
Recovery Return Question
Thanks for putting this together.
After flashing this, can users return to the recovery of their choice, or are we locked in to TWRP 2?
tobnddl said:
Thanks for putting this together.
After flashing this, can users return to the recovery of their choice, or are we locked in to TWRP 2?
Click to expand...
Click to collapse
You can go to whatever recovery you like! TWRP is only used for safety reasons during the flash.
Sent from my SCH-I535 using xda premium
It's not working for me. It reboots into recovery but doesn't do anything. Then the phone doesn't boot into the room and I have to re flash the rom
Edit: I to, did not have busybox installed. you may want to put a warning on the app
---------- Post added at 10:26 PM ---------- Previous post was at 10:03 PM ----------
Also, if the build prop was edited to SPH-710 the Samsung voice program would still work
EXACTLY what I was looking for. I saw the entire post about getting it working, and just didn't feel that I was "qualified" enough to do what was required. I bought the app and figured I'd give it a try. It took a bit longer to download from the Play Store for some reason, but once it was done, it installed rather quickly.
I then ran the program, and selected as it was instructed. POOF it started installing, and then the phone rebooted into TWRP (I already use TWRP anyway), and all went well. I set up my account and that too went well. I tested it as I could and it works, then I decided to restore my build prop, after that again the phone rebooted, and then tested out wallet. It too works again.
Now then the only thing I am thinking about is automatic updates. I have to have that for another program for my work. I've seen the other post that you do not want the auto updates on. If on the next auto update it causes a problem I will report that here, but I think that just re running the program letting it do the build prop again, get it working, then restoring the build prop should be an easy fix for that.
dB Zac said:
It's not working for me. It reboots into recovery but doesn't do anything. Then the phone doesn't boot into the room and I have to re flash the rom
Edit: I to, did not have busybox installed. you may want to put a warning on the app
---------- Post added at 10:26 PM ---------- Previous post was at 10:03 PM ----------
Also, if the build prop was edited to SPH-710 the Samsung voice program would still work
Click to expand...
Click to collapse
So you got it working? Sorry for overlooking busy box in the OP. Hope everything worked out okay.
Sent from my SCH-I535 using xda premium
MasterDecker said:
EXACTLY what I was looking for. I saw the entire post about getting it working, and just didn't feel that I was "qualified" enough to do what was required. I bought the app and figured I'd give it a try. It took a bit longer to download from the Play Store for some reason, but once it was done, it installed rather quickly.
I then ran the program, and selected as it was instructed. POOF it started installing, and then the phone rebooted into TWRP (I already use TWRP anyway), and all went well. I set up my account and that too went well. I tested it as I could and it works, then I decided to restore my build prop, after that again the phone rebooted, and then tested out wallet. It too works again.
Now then the only thing I am thinking about is automatic updates. I have to have that for another program for my work. I've seen the other post that you do not want the auto updates on. If on the next auto update it causes a problem I will report that here, but I think that just re running the program letting it do the build prop again, get it working, then restoring the build prop should be an easy fix for that.
Click to expand...
Click to collapse
Glad it helped you! Also, thanks for the thorough post, It's really appreciated. I leave my auto-updates on, but I haven't had any issues. If you were to have issues, you can just reset wallet, restore built.prop(if you haven't already), and run Wallet Installer again.
Sent from my SCH-I535 using xda premium
Rom Updates
What happens after you install this get it working then flash a new version of a rom... Im currently using Tasks aokp jellybean rom. Do I need to do this everytime I update a rom or just do it once nad it's done, Also Task has 4.2 available does this matter once I update to his 4.2 releases
njinstantkarma said:
What happens after you install this get it working then flash a new version of a rom... Im currently using Tasks aokp jellybean rom. Do I need to do this everytime I update a rom or just do it once nad it's done, Also Task has 4.2 available does this matter once I update to his 4.2 releases
Click to expand...
Click to collapse
Every time you want to flash a new ROM, you have to reset google wallet. Then you can use my app again, after the new ROM flash, and you'll have wallet again. When it comes to 4.2 in specific I can't give you a straight answer, since I don't have access to a 4.2 ROM. My guess is that it will work fine, but it's never been tested.
Sent from my SCH-I535 using xda premium
If I just update a new version of a current Rom as I do weekly doing a dirty flash or not wiping just clearing dalvic cache etc, would I still need to re-install the app. Or only on a full wipe or a new Rom would I need to start from scratch? .
Another question if I re-install the app would I need to setup the payment every time and add new funds or cards or would all that information be available in the account
njinstantkarma said:
If I just update a new version of a current Rom as I do weekly doing a dirty flash or not wiping just clearing dalvic cache etc, would I still need to re-install the app. Or only on a full wipe or a new Rom would I need to start from scratch? .
Another question if I re-install the app would I need to setup the payment every time and add new funds or cards or would all that information be available in the account
Click to expand...
Click to collapse
If you're dirty flashing, you should be fine leaving Wallet as is, but if you need to do a wipe, you should really reset Wallet. All of that information is saved on Google's servers, so it will be there next time
Sent from my SCH-I535 using xda premium
Hopefully someone can help me out. This morning when I turned on my phone and tried to open mail it said "this app is not installed." So I rebooted and got the same error. I went into the system and saw that GoogleMail.apk was still there, so I tried to install it and it got to the "install" button but then would not install. Then I tried to copy the apk out of the system folder to the sdcard and same thing, gave me the install button but would not install. In frustration, I backed up my data and factory reset the phone. Still no mail app!
I'm on version 4.2.1 stock.
I can only guess my mail apk is corrupt or something, but I have no idea how to get it back. Any thoughts, suggestions, fixes?
Sent from my GT-N8013 using Tapatalk 2
Weird issue, are you rooted? If so try removing with titanium and flash stock gapps. If not rooted work around could be to DL and use the gmail app?
Sent from my Galaxy Nexus using xda app-developers app
ExploreMN said:
Hopefully someone can help me out. This morning when I turned on my phone and tried to open mail it said "this app is not installed." So I rebooted and got the same error. I went into the system and saw that GoogleMail.apk was still there, so I tried to install it and it got to the "install" button but then would not install. Then I tried to copy the apk out of the system folder to the sdcard and same thing, gave me the install button but would not install. In frustration, I backed up my data and factory reset the phone. Still no mail app!
I'm on version 4.2.1 stock.
I can only guess my mail apk is corrupt or something, but I have no idea how to get it back. Any thoughts, suggestions, fixes?
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
I have the same problem! I'm on 4.1.2, rooted.
Can someone post the .apk?
I just installed Hyperdrive rls14 and Google search crashes every time I try to use it.
I've rebooted, reflashed the rom, clean flash, wiped everything, removed Google search with Rom toolbox and reinstalled it fresh from the Play store. Nothing seems to work.
I love the rom, and want to keep it. I use Googe now a ton though, so I'm stuck here.
Google search is a system app so if you use rom toolbox it will not delete it from the system. Using a root explorer go into system apps and delete it. Reboot, this reboot is very important to do. After rebooting the phone go back in using root explorer make sure it's still gone. Then redownload from play store and install.
Sent from the future via Tapatalk 4
edfunkycold said:
Google search is a system app so if you use rom toolbox it will not delete it from the system. Using a root explorer go into system apps and delete it. Reboot, this reboot is very important to do. After rebooting the phone go back in using root explorer make sure it's still gone. Then redownload from play store and install.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Unfortunately, that did not work. I do thank you for your suggestion though.
Trailjedi said:
Unfortunately, that did not work. I do thank you for your suggestion though.
Click to expand...
Click to collapse
Uninstall it with titanium backup, I did this so I know it works. Then reinstall it from the market
Lancerz said:
Uninstall it with titanium backup, I did this so I know it works. Then reinstall it from the market
Click to expand...
Click to collapse
That didn't do it, either. (I did learn something though,s o thanks
I just noticed that S Voice doesn't work, either. Since Google search uses voice recognition also, could it be an issue with that?
Did you check the MD5 Checksum of the Rom before Flashing ? I would suggest downloading the Rom again. Check the MD5 Checksum to verify a good DL. The Full Wipe, and Flash.
Trailjedi said:
That didn't do it, either. (I did learn something though,s o thanks
I just noticed that S Voice doesn't work, either. Since Google search uses voice recognition also, could it be an issue with that?
Click to expand...
Click to collapse
I am having the same issue. Have you figured out anything yet?
I am also having the same issue. I removed it from titanium backup and also root explorer. Nothing works. Also if I reboot the phone by using the power button it boots up but shows the nexus symbol. If I turn the phone sideways I can see half the screen. Any ideas?
blackout513 said:
I am having the same issue. Have you figured out anything yet?
Click to expand...
Click to collapse
curtiscr87 said:
I am also having the same issue. I removed it from titanium backup and also root explorer. Nothing works. Also if I reboot the phone by using the power button it boots up but shows the nexus symbol. If I turn the phone sideways I can see half the screen. Any ideas?
Click to expand...
Click to collapse
Search the Rom thread. Several people have reported the issue.
I'm having the same issue on my t999 hyperdrive room rls16
Sent from my SGH-T999 using Tapatalk 4
Has anyone found a fix for the Google Search crash problem?
Gotta fix
GeneralSky2004 said:
Has anyone found a fix for the Google Search crash problem?
Click to expand...
Click to collapse
You may be missing chaton or chaton v. I installed this app from the market, S-Voice calls on this app to work. You still needs to follow all the steps listed above to remove google now with a root browser. I used rom toolbox pro and that did the trick for me.