Related
Ok... here's the deal. I just decided to switch roms finally to see what is new out there. I had been running an old version of Uber Kingdom. Here is the problem I am having. It is boot looping. Relatively simple problem to fix usually. But wait, there's more! It is boot looping in every single rom I install. Sometimes it won't boot to clockwork properly either and I have to pull the battery. Is there someway I can fix this? Or is this a hardware problem (which I kind of doubt)? I just don't understand what the heck is going on. I have been flashing different roms left and right for the past few hours trying to get this thing to stabilize. Sometimes it will boot up into the rom, I will get mostly through the google accounts setup, and then it will restart, and then loop. Other times it won't even get past the white incredible screen, and then sometimes it will make it into the rom splash screen. I have attempted to install CM7 nightly, Uber kingdom, and Synergy so far. I can flash the new rom, I can mount the SD card in clockwork, but then it begins to loop again as soon as I leave clockwork.
Let me know if you need any other information.
Is there a way to just completely redo EVERYTHING, clockwork, rom, everything, just to make sure I have a nice clean slate?
Thanks a ton for reading through this novel. I am extremely frustrated.
~Will
PS, I may not get back to this thread until morning. I have to get to sleep for work. Sorry if I don't respond right away to information requests. Thanks again!
If you can mount the SD card, download the stock RUU from www.dougpiston.com, put it on the root of the SD card named exactly PB31IMG.zip, and boot into hboot to install it. Your phone should be restored to stock, a clean slate.
Tried a different SD?
Sent from my ADR6300 using XDA Premium App
How are you downloading and flashing the ROM? I had this problem when trying to do everything through Rom Manager. Even trying to flash in recovery with a ROM downloaded through ROM Manager would loop.
Update
Well, I was just getting ready to flash the original RUU when I tried one last time to restore my old Uber rom setup and it worked (whereas the last 3 times of doing exactly the same process didn't). It stopped looping at least, even though I am still running the same rom I was before. I think tonight I am still going to attempt to flash the RUU anyway and start over anew.
To answer the questions before, No, I did not try a different SD. I didn't know it could make that much difference. Still on the original one that came with the phone.
As the downloading and flashing process goes, I was downloading direct from the XDA forums on my laptop, then transferring the files via USB. I have never really liked using the Rom Manager. It cuts me out of the XDA loop and I don't get to see all the bleeding edge discussions, etc...
So I will try to flash everything new tonight, and then post my results for anyone who is curious. Thanks for the help guys!
Hello,
Last night I rooted my device using this (http://forum.xda-developers.com/showthread.php?t=1265429) method and file from zedomax and everything worked great except when I booted my device there was a yellow triangle with a black “!” in it. I figured that just indicated the device was rooted or running a 3rd party kernel so I didn’t worry about it.
Today I launched my camera app and it failed to load the interface but showed the image from the camera momentary then crashed back to the home screen. I restarted my device and when the device restarted it was very slow and unresponsive and after unlocking it my live wallpaper was gone replaced with the last background I used before selecting a live background a couple weeks back. No icons or widgets loaded and I am unable to open the settings tray. The only things I am able to do with the phone is pull down the notification bar, respond to text messages, adjust the volume and hold power to restart the phone. All of which are very slow and delayed.
When I connect the device to my computer windows is no longer able to load the drivers and Kies is unable to connect with the device. I am not sure what caused this or how to resolve this issue so any advice or known fixes would be fantastic! I am unable to get to clockwork mod to restore my backup and I am unable to get to Kies or the phone settings to do a factory reset so I really don’t know what to do they were supposed to be a last resort and now I don’t even think I can do them. I am an experienced techie but I am new to android and this is the first device I have rooted so any advice would be great no matter how basic it may be.
UPDATE: I just connected the phone via USB to my laptop at work and it was able to discover and install everything it needed to connect with the phone. I am installing Kies now so at least there is hope of a factory restore, although I really hope it doesn't come to that!
Boot into download mode and flash the stock eg30 tar file from crawrj.
Sent From My Evo Killer!!!
Thanks Already started doing that waiting for it to download now
Still no touchwiz... great!
Try flashing a stock rom via clockworkmod.
efarley said:
Still no touchwiz... great!
Click to expand...
Click to collapse
You can root again and restore your backup, or go to this website www.lostandtired.com (midnight roms blog) click on android development and download and flash the sprint bloat and TW restore zip. Hope that helps.
I flashed the stock rom which didn't change anything so then I used clockworkMod to do a factory reset which ended up trapping me into a boot loop. I could use Odin to flash new roms but the device would never go past the 4G logo
I ended up taking the device back to Best Buy and since the loading screen showed the stock rom and they couldn't get past the 4G logo I just had to say it wasn't rooted and they gave me a new one.
I would love to know if anyone has any idea of what went wrong here so that I can feel comfortable rooting again. Also if anyone has some basic articles handy that teach basics of rooting that would be great, I didn't even know about clockwork mod until after I had this problem so knowing things like that earlier would have helped a lot I think. I'll be spending the weekend looking up everything I can find on the subject so any reading you guys can suggest would be fantastic.
efarley said:
I flashed the stock rom which didn't change anything so then I used clockworkMod to do a factory reset which ended up trapping me into a boot loop. I could use Odin to flash new roms but the device would never go past the 4G logo
I ended up taking the device back to Best Buy and since the loading screen showed the stock rom and they couldn't get past the 4G logo I just had to say it wasn't rooted and they gave me a new one.
I would love to know if anyone has any idea of what went wrong here so that I can feel comfortable rooting again. Also if anyone has some basic articles handy that teach basics of rooting that would be great, I didn't even know about clockwork mod until after I had this problem so knowing things like that earlier would have helped a lot I think. I'll be spending the weekend looking up everything I can find on the subject so any reading you guys can suggest would be fantastic.
Click to expand...
Click to collapse
If you a clockwork and "stock rom" you were still rooted...Doing a factory reset will send you into bootloop when rooted. Trying to flash other roms on a bootloop is not going to work. You need to have grabbed a backup such as Zedo has on his post and put the backup in clockwork folder on your phone. Then flash that in CWM. Would of brought you out of bootloop to a stock rom with his kernal. Now you can flash Roms and kernals or could of flashed crawf or anyone else FULL stock rom and been back to stock kernel and rom and not rooted.
dallastx said:
If you a clockwork and "stock rom" you were still rooted...Doing a factory reset will send you into bootloop when rooted. Trying to flash other roms on a bootloop is not going to work. You need to have grabbed a backup such as Zedo has on his post and put the backup in clockwork folder on your phone. Then flash that in CWM. Would of brought you out of bootloop to a stock rom with his kernal. Now you can flash Roms and kernals or could of flashed crawf or anyone else FULL stock rom and been back to stock kernel and rom and not rooted.
Click to expand...
Click to collapse
Ohhhh that's what happened! Awesome thanks. I will be much better prepared with backups out the wazoo this time haha.
Now if only I could figure out why Touchwiz died in the first place hmmm....
I hope you can figure it out, just postin here to say that when I saw this thread, it reminded me of the thread over in the EVO forums about the guy who claimed that sprint removed his Sense from his phone.
Khilbron said:
I hope you can figure it out, just postin here to say that when I saw this thread, it reminded me of the thread over in the EVO forums about the guy who claimed that sprint removed his Sense from his phone.
Click to expand...
Click to collapse
haha SPRINT removed it?! So that person thinks sprint monitors every device and has a team of techies on staff to hack your phone and brick it if you break their rules?... yeah that totally makes more sense than a file got corrupted when you were messing with the kernel.. some people maybe shouldn't be rooting their devices in the first place haha
Hi everybody!
I figure we should have a thread dedicated to telling horror stories about flashes gone wrong. Whether it's because of power failures, bad USB cables, poorly labeled packages, or pure user error, we've all had that moment of worry: "Did I just turn my device into a paperweight?"
It's my hope that, by sharing these stories, we can help each other realize that we're all human, we all make mistakes, and most mistakes can be recovered from. Don't be afraid to share your stories; we can't learn from each other's mistakes if nobody talks about them!
_____________________________________________
My first story is from my Telus SGS3 (I747M, you'll see why that matters in a moment) and is definitely a user-error kind of story.
I've been playing around with CM10 and its derivatives for the past month or two (got my SGS3 on release day and it wasn't running Samsung software 3 hours later) and I'm not new to Android, having run XDAndroid on my HTC Diamond, and bouncing between CM7 and CM9 on my Milestone. The first thing I did when I got my SGS3 was a full block device backup using DD from the command line, which is the only reason I don't have a paperweight today.
I decided to try out Paranoid Android over a week ago and I've been loving it, so I haven't been flashing much lately. But, when I got back from vacation and saw that CM10 had gone into nightly builds, I couldn't resist the temptation to try a clean install. I've got folders on my SD card for ROMs, GApps, kernels, recoveries, and anything else flashable just to make my life easier. Apparently at some point I downloaded an AT&T (I747, no M) modem, stuck it in a "/modems/" folder with the rest of my flashables, but realized that it wouldn't work on my device, so I never used it. I then promptly forgot that I had put it on the SD card, and it had a fairly cryptic filename. Away I went, flashing CM10, GApps, a nice bootscreen, and... the modem.
Dammit. :crying:
At this point, I was running the newest CM10 build, but with a borked modem. I thought I had fallen victim to the IMEI bug that's been going around, but then I remembered something about that modem file not being usable on a Telus device... And had no idea how to get back to a working state. I already knew that none of my nandroid backups would have the modem in them, and the only "stock" flashables I could find were rooted kernels and a nearly-700MB "stock" package that wouldn't download any faster than 10 kb/s. I couldn't wait 20 hours for a download, I wanted my phone now! I tried using Odin with a few of the TAR packages I found, but that only made my situation worse to the point of failing to boot entirely, even restoring a nandroid wasn't helping anymore.
I started digging through the forums in the hope that someone had ripped the Telus modem into a CWM flashable zip, but had no luck. I tried both the Rogers and Bell modems with the same results. That's when I remembered that I had done a block backup, but I had no idea which block device was the modem, and my phone wouldn't even boot up to let me MTP the files over. I was left with CWM recovery as my only option, and had to ADB push 2.5 GB of .img files to the SD card, and DD them one at a time through the ADB shell.
Somehow, it all worked out, and I was back to running Stock Touchwiz with root, and was then able to restore a nandroid from yesterday and amazingly enough Paranoid Android booted up, happy as ever, and in came my emails and text messages. I know I'm lucky that my IMEI didn't get lost in that mess, but it just goes to show that there's no such thing as a backup being "too extensive". You never know when "mmcblk0p99" needs to be replaced with a known working copy.
I do believe im going to flash a stock/rooted ROM and then do a dd backup.
What options do you set for your backups?
Sent from my SGH-I747M using xda premium
I did as follows:
Code:
cd /dev/block/
ls
(get the list of mmcblk devices from here)
dd if=/dev/block/mmcblk0p1 of=/sdcard/dd/blk0p1 bs=4096
...
dd if=/dev/block/mmcblk0p99 of=/sdcard/dd/blk0p99 bs=4096
Obviously you shouldn't have 99 partitions... but you get the idea. I ran each line manually.
Then just move the /dd/ folder off your /sdcard/ and onto some safe storage.
I bought my device off someone from Craigslist 2 nights ago. Went home with device working great. Decided to update from ICS to JB, downloaded everything on the ol gaming machine, go to update using Kies, then BAM! Hung update, bricks phone immediately. Woo....great experience after dropping $400 on phone lol. Contacted Samsung support who told me my update wouldn't work until I registered? I told him it bricked my phone and it wasn't being picked up by computer anymore and I wanted to go back to ICS, he apparently thought waiting 24 hours would fix driver issues. Found JB official rom and learned about Odin. Worked at it until 2-ish am, never worked, woke up, did ICS instead same method, worked immediately, then update worked.
Moral of story? Don't trust Samsung apparently, go with 3rd party everything....
Can we share from other devices? Because I've had a serious one with my nitro HD lol.
Sent from my SGH-I747 using xda premium
After having my phone on stock rooted touch wiz since day one I was tempted to go jellybean... So months later I'd say Octoberish I finally said f**k it I'm going aokp... So I ran the task and k toonsen romantic for a while until they started porting the t mobile jelly bean stock tw rom... It made me miss tw and it's awesome camera app... So I flashed it after a week or so upon its release... First thing I noticed was the phone would get txts and phone calls rarely (keep in mind I'm in an lte area) and it became un bare able after about an hour. So I reverted back to my aokp nandroid and just figured I'd call it a day... But when I restored my nandroid my service was still messed up.. So after a bit of gooogling I checked my phone status to find my imei to be 0!!! I was beyond upset... So I tried re flashing stock in Odin and everything else I could find (unfortunately the imei restorer wasn't existent yet) and it came to the point where I left it stock and went to the att repair center down the road... The guy didn't know what was wrong with it and I just played dumb... After about 30 mins he came to the conclusion that my sim card slot was broken and I got a new phone...
After getting this one back home I instantly rooted it again
I've been staying away from those ported tmobile roms ever since
Sent from my SAMSUNG-SGH-I747
[/COLOR]
rani9990 said:
Can we share from other devices? Because I've had a serious one with my nitro HD lol.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I dont see why not. All stories are interesting lol
Sent from my SAMSUNG-SGH-I747 using xda premium
No bad flashes .... Yet?
Sent from my Nexus 7 using xda app-developers app
Alright then,
It was my first day with the LG Nitro HD. My first smartphone (don't comment xD) and I was prepared to root and flash the living crap out of it. Done with rooting, now to install CWM. Simple enough, right? WRONG. This was the one time where google was not my friend. I followed a horribly misleading guide, and ended up with a paperweight. Turns out I flashed the recovery image to the secondary bootloader partition, thereby bricking my phone completely and utterly, irreparably. Had to ship it off to LG, and they fixed it, no questions asked. Thank God for that...
I had an HTC Touch Pro on Sprint. You had to flash a stock ROM before flashing a new custom ROM or the phone would stop working properly after almost exactly an hour. The file system would become completely messed up but the OS would keep running from RAM. It would fail to reboot after that. It was such a pain that I updated my phone every ~3-4 months.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
This one actually just happened this weekend.
So I finally got bored of having stock ICS on my i747 (Rogers), and since I loved cm 7/9 on my SGS2, I figured I'd go with the latest (15 dec) CM10 nightly.
downloaded to phone, rebooted in recovery, wiped data and cache, and installed the new firmware.
booted up and I've got no (or inconsistant) cell service. Figure it's a bug that hasn't been fixed, so no biggie, I backed up a week ago, so I decided to revert back to stock for the time being.
go through the process, and discover I still only have EDGE data.... WTF?
So I do some reading *AFTER the fact, hur dur...* and discover the IMEI wipe issue, and surprise surprise, I didn't do an NV backup, since I didn't know it'd get wiped.
Spent a couple hours keeping the phone / computer away from the 13 month old while I replace the IMEI NV data.... Still stuck on EDGE.... at least my IMEI is showing up though.
Nick
Odin back to stock worked for me when that happened to me.... YMMV.
Sent from my SGH-I747 using xda premium
The night I got my phone, I rooted via odin and when it booted, I'd get a framework FC every 90 seconds or so. It took me almost two hours to get cwm recovery on my phone to flash AOKP. Not a brick, but since I hadn't even activated it, yet....not happy.
Sent from my SGH-I747 using xda app-developers app
Each Phone an Adventure
I can completely relate to all of you. Though I'm new as a member (thought I already had an account but apparently I didn't), I've been using the forum for a long time. I have rooted four phones to date, each with its' own disaster story and happy ending. My latest was the AT&T S3. While not a disaster entirely, the no flash counter guide ended up not working out for me. So I paved my own trail so to speak and I found all the root dependencies (Recovery, ROM, the works) by myself. The entire process took me about a day. I also used TriangleAway which threatened explosions if anything went wrong and thankfully nothing did. I'm glad I never had to send a phone back, I've always been very cautious about any type of flashing and always read the forum before doing it.
When I was on the captivate, I really wanted JB so I thought I could grab the Nexus S JB ROM cause the devices were so close to each other. Flashed it via Odin. Good God was that a mistake. I couldn't get back to download mode using the button combo since the button mapping was all switched up. I had this one cable that would give me bad connection, so I jiggled that around in the port for 35 minutes trying to get download mode. Finally, I got it and flashed the stock package. Learned my lesson, will never flash something from a different phone or anything that won't work 100%.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
goobs408 said:
When I was on the captivate, I really wanted JB so I thought I could grab the Nexus S JB ROM cause the devices were so close to each other. Flashed it via Odin. Good God was that a mistake. I couldn't get back to download mode using the button combo since the button mapping was all switched up. I had this one cable that would give me bad connection, so I jiggled that around in the port for 35 minutes trying to get download mode. Finally, I got it and flashed the stock package. Learned my lesson, will never flash something from a different phone or anything that won't work 100%.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
The thing about the Captivate was, no matter what ROM you flashed, the jig ALWAYS worked. It saved my ass quite a few times, until that is, the memory in the phone decided to die. I could flash through Odin as much as I wanted and it would pass everytime, but never go past the boot animation.
Dave the Knave said:
The thing about the Captivate was, no matter what ROM you flashed, the jig ALWAYS worked. It saved my ass quite a few times, until that is, the memory in the phone decided to die. I could flash through Odin as much as I wanted and it would pass everytime, but never go past the boot animation.
Click to expand...
Click to collapse
Flash stock GB with forgot name of kernel baked in. After that in cwm recovery partition external SD card.. then reflash in Odin then install whatever ROM u want
Sent from my SGH-I747 using xda premium
Trying to use Kies to flash anything. That's always a bad story for me
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Don't attempt to explain to a friend of little flashing knowledge how to root their phone. He hard bricked my phone. Odin is easy if you read but he turned it into rocket science and yeah.. Had to wait for another phone
Sent from my SGH-I747 using xda app-developers app
Well let me begin by saying I have a Galaxy Nexus and have been flashing roms, etc like it's going outta style. It's very simple to me and I am no newb. So with this logic in mind, I got a brand new GS3 the other day and proceeded to do the same. First, it took my a while to realize there are so many variants of our phone, then when I did a search I saw that there was a i9305 that is LTE....you already know where this is going. I figured that was the correct variant, spent like an hour trying to install a recovery because of the auto wipe feature and thus increasing the flash counter to 10+ (wtf!). Finally I download a rom, flash it. Freezes half way through (knew that wasn't good) and when I pull the battery, BAM, bricked phone.
After some more reading, not only did I find out the correct way of flashing to not increase the counter but also that the Canadian versions are the i747! Luckily it happened a day after I got it and I switched it out for a new one. Moral of the story: If you are flash happy and think all phones are like the Nexus, that's your biggest mistake! lol
So here's the deal,
My ATT Galaxy S3 is half dead, and by that I mean soft bricked and I still believe there is hope in fixing this thing. Here's the entire story, everything was fine before I updated to CM 10.1 via ClockworkMod Recovery. At the time I was running the stable CM10. So I grabbed a copy of GAPPS, The CM10.1 nigthly, and a lean kernel to help improve battery life. I did the factory reset setting in CWM, then flashed CM10.1, Gapps, then the kernel. Then I did the usual after you flash a kernel, clean the cache, dalvik cache, and fix permissions. When I rebooted, the Galaxy S III boot logo was purple and glitchy, and my thought was, "Oh nooooo I bricked my phone." I had a backup saved, but after that glitch, everything was gone, so I had no backup and now I was panicking. I put my ext sd card in my reader on my PC and put the stable CM10 zip file on it, so i flashed it in CWM. My phone booted up normally. But here's the catch, no keyboard. Everything worked fine except my keyboard which kept saying, "Android Keyboard(AOSP) has encountered and error" or something like that every few seconds and would disappear just as fast. But here's the even funnier catch, everything that was my phone was still there except in a folder called 0, and in that folder another folder called 0, and in that contained a 'snapshot' of my phone as it was. CWM would not read the backup folder, or any of the files. So then I put my phone in download mode and flashed the stock ICS Samsung/ATT Rom called I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 to try to revive my phone fresh. It passed in ODIN, and now it boots up like normal except it gets stuck on the last Samsung label of the boot animation with the notification light a solid blue. Any help would be so much appreciated, I know of nothing else to do but I believe this can be fixed.
Re: [Q] Any possible ways to unbrick a softbricked SHGI747
MeatwadGetTheHunniesG said:
So here's the deal,
My ATT Galaxy S3 is half dead, and by that I mean soft bricked and I still believe there is hope in fixing this thing. Here's the entire story, everything was fine before I updated to CM 10.1 via ClockworkMod Recovery. At the time I was running the stable CM10. So I grabbed a copy of GAPPS, The CM10.1 nigthly, and a lean kernel to help improve battery life. I did the factory reset setting in CWM, then flashed CM10.1, Gapps, then the kernel. Then I did the usual after you flash a kernel, clean the cache, dalvik cache, and fix permissions. When I rebooted, the Galaxy S III boot logo was purple and glitchy, and my thought was, "Oh nooooo I bricked my phone." I had a backup saved, but after that glitch, everything was gone, so I had no backup and now I was panicking. I put my ext sd card in my reader on my PC and put the stable CM10 zip file on it, so i flashed it in CWM. My phone booted up normally. But here's the catch, no keyboard. Everything worked fine except my keyboard which kept saying, "Android Keyboard(AOSP) has encountered and error" or something like that every few seconds and would disappear just as fast. But here's the even funnier catch, everything that was my phone was still there except in a folder called 0, and in that folder another folder called 0, and in that contained a 'snapshot' of my phone as it was. CWM would not read the backup folder, or any of the files. So then I put my phone in download mode and flashed the stock ICS Samsung/ATT Rom called I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 to try to revive my phone fresh. It passed in ODIN, and now it boots up like normal except it gets stuck on the last Samsung label of the boot animation with the notification light a solid blue. Any help would be so much appreciated, I know of nothing else to do but I believe this can be fixed.
Click to expand...
Click to collapse
This one should be easy, if you got a pass in ODIN, the hard part is over.
Go into stock recovery, wipe cache and perform factory reset. Reboot and report back. This generally fixes that bug. Its very common after an ODIN flash.
Sent from my SGH-I747 using xda app-developers app
RPelham said:
This one should be easy, if you got a pass in ODIN, the hard part is over.
Go into stock recovery, wipe cache and perform factory reset. Reboot and report back. This generally fixes that bug. Its very common after an ODIN flash.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Oh wow, thank you so much. That worked and everything is as it should be, just like when I got it out of the box. I thought I was screwed for a moment, I even had an upgrade and got a HTC One VX a couple days ago haha. Wow. Again, thank you. :highfive:
MeatwadGetTheHunniesG said:
Oh wow, thank you so much. That worked and everything is as it should be, just like when I got it out of the box. I thought I was screwed for a moment, I even had an upgrade and got a HTC One VX a couple days ago haha. Wow. Again, thank you. :highfive:
Click to expand...
Click to collapse
No problem at all =) Its pretty hard to completely brick your device unless you flash something made for a different phone lol. As long as your phone can see any signs of life (even a faint vibration), let us know and we are more than happy to help!
Sent from my SGH-I747 using xda app-developers app
I once spent four hours trying to hard brick a Galaxy S2 phone (science experiment).
I'd flash ROM's for other phones.
Kernel's.
Recoveries.
Took forever to finally hard brick it.
S.O.S. Phone is completely wiped only dowload mode and recovery work.
Okay so I think I kind of put myself in a sticky situation. I tried to flash a custom rom onto my phone but in the process deleted my modem file everything worked fine except for the fact that I couldnt make calls or text messages. Basically a $400 dollar multimedia device. At this point I just want to put my phone back to the way it was when I got it at the AT&T store. My phone model is SGH-i747 Galaxy S3 that came with JB 4.1.1 pre installed.
I once spent four hours trying to hard brick a Galaxy S2 phone (science experiment).
I'd flash ROM's for other phones.
Kernel's.
Recoveries.
Took forever to finally hard brick it.
Click to expand...
Click to collapse
Out of curiosity, how did you finally manage to brick it?
Sent from my Nexus 7 using xda app-developers app
solution
MeatwadGetTheHunniesG said:
So here's the deal,
My ATT Galaxy S3 is half dead, and by that I mean soft bricked and I still believe there is hope in fixing this thing. Here's the entire story, everything was fine before I updated to CM 10.1 via ClockworkMod Recovery. At the time I was running the stable CM10. So I grabbed a copy of GAPPS, The CM10.1 nigthly, and a lean kernel to help improve battery life. I did the factory reset setting in CWM, then flashed CM10.1, Gapps, then the kernel. Then I did the usual after you flash a kernel, clean the cache, dalvik cache, and fix permissions. When I rebooted, the Galaxy S III boot logo was purple and glitchy, and my thought was, "Oh nooooo I bricked my phone." I had a backup saved, but after that glitch, everything was gone, so I had no backup and now I was panicking. I put my ext sd card in my reader on my PC and put the stable CM10 zip file on it, so i flashed it in CWM. My phone booted up normally. But here's the catch, no keyboard. Everything worked fine except my keyboard which kept saying, "Android Keyboard(AOSP) has encountered and error" or something like that every few seconds and would disappear just as fast. But here's the even funnier catch, everything that was my phone was still there except in a folder called 0, and in that folder another folder called 0, and in that contained a 'snapshot' of my phone as it was. CWM would not read the backup folder, or any of the files. So then I put my phone in download mode and flashed the stock ICS Samsung/ATT Rom called I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 to try to revive my phone fresh. It passed in ODIN, and now it boots up like normal except it gets stuck on the last Samsung label of the boot animation with the notification light a solid blue. Any help would be so much appreciated, I know of nothing else to do but I believe this can be fixed.
Click to expand...
Click to collapse
There's another thread called stuck on boot screen with same issue. Had same issue with simular Rom had to boot in recovery and clear cache and user settings. And no longer an issue
Soft bricked...
I'm currently dealing with a soft brick that I can't unbrick either. Got a replacement Sgh-i747 thru insurance. Rooted and decided to try twrp instead of cwm. Went to flash the ROM and didn't realize twrp didn't read ext SD cards until after i wiped my phone and OS. Tried reverting back to stock but Odin fails on the stock firmware every time. Tried flashing cwm and flashing a ROM but keep getting error 7 and no Roms flash. Any ideas as to where to start over with?
kinjo1023 said:
I'm currently dealing with a soft brick that I can't unbrick either. Got a replacement Sgh-i747 thru insurance. Rooted and decided to try twrp instead of cwm. Went to flash the ROM and didn't realize twrp didn't read ext SD cards until after i wiped my phone and OS. Tried reverting back to stock but Odin fails on the stock firmware every time. Tried flashing cwm and flashing a ROM but keep getting error 7 and no Roms flash. Any ideas as to where to start over with?
Click to expand...
Click to collapse
I think I did someting like that too nd now I cant install any ROM and TWRP complains that I have no OS inside the phone.I tried modifying the assert-script file but it then eventually ends up at STATUS 6 and not status 7 again.Pls and Pls help us
You have to be on twrp 2.7.x to install any kk ROMs.
Sent from my SGH-I747 using Tapatalk
Hey guys,
So I desperately need some help here. I rooted my phone using the ODIN method, which worked fine. I put 2 ROMS on the internal memory in order to see which I liked best. I was only able to install one before my phone started heading downhill.
Basically after installing LiquidSmooth (the "stable" one) my phone started wigging out: not letting me access the external SD card (it didn't even see that I had one, and I popped it to reset it), not letting me even open a web browser, saying I had no connection via 3G (which is strange because it's a 4G phone, and it stated so before I installed LiquidSmooth) and just generally not letting me do anything.
Logically I figured I'd just replace the ROM with another, so I tried to install the "Pac-Man" d2tmo ROM... but LiquidSmooth was the only one starting up, no matter what I did (soft reboot, factory restore from keypad, UP vol + power + home, and even from inside the phone settings.) Nothing worked. I even tried to recover a backup I had made before I installed LiquidSmooth, but the menu just kept saying no data present (which is especially odd, since I even put the backup on my desktop, but I just can't get the phone to run it)
I figured, okay well maybe I'll just have to restore from the vol + pow + home screen. Bigger mistake. Now my phone won't boot at all, and I'm at a loss for words. I've rooted other phones with no issue before (I even had to recode a bit of a "one-click" program to root my ol' Galaxy S Vibrant) and now I just don't know what to do.
Here's what I need to know: If I can recover to factory (and if so, what other ROMs are good... I was mislead by everyone saying LiquidSmooth was great *grrr*), and if not, what exactly are my options to get this thing running at all.
Oh, and I was running Jellybean 4.1.1 and it got bumped to 4.2.2 when I installed LiquidSmooth, if that helps at all.
Thanks so much for any and all help.
OneIdiotInATree said:
Hey guys,
So I desperately need some help here. I rooted my phone using the ODIN method, which worked fine. I put 2 ROMS on the internal memory in order to see which I liked best. I was only able to install one before my phone started heading downhill.
Basically after installing LiquidSmooth (the "stable" one) my phone started wigging out: not letting me access the external SD card (it didn't even see that I had one, and I popped it to reset it), not letting me even open a web browser, saying I had no connection via 3G (which is strange because it's a 4G phone, and it stated so before I installed LiquidSmooth) and just generally not letting me do anything.
Logically I figured I'd just replace the ROM with another, so I tried to install the "Pac-Man" d2tmo ROM... but LiquidSmooth was the only one starting up, no matter what I did (soft reboot, factory restore from keypad, UP vol + power + home, and even from inside the phone settings.) Nothing worked. I even tried to recover a backup I had made before I installed LiquidSmooth, but the menu just kept saying no data present (which is especially odd, since I even put the backup on my desktop, but I just can't get the phone to run it)
I figured, okay well maybe I'll just have to restore from the vol + pow + home screen. Bigger mistake. Now my phone won't boot at all, and I'm at a loss for words. I've rooted other phones with no issue before (I even had to recode a bit of a "one-click" program to root my ol' Galaxy S Vibrant) and now I just don't know what to do.
Here's what I need to know: If I can recover to factory (and if so, what other ROMs are good... I was mislead by everyone saying LiquidSmooth was great *grrr*), and if not, what exactly are my options to get this thing running at all.
Oh, and I was running Jellybean 4.1.1 and it got bumped to 4.2.2 when I installed LiquidSmooth, if that helps at all.
Thanks so much for any and all help.
Click to expand...
Click to collapse
Did you flash the latest recovery? Did you wipe data when flashing to a 4.2.2 aosp ROM from 4.1.1 tw? You'll need to do that before and not dirty flashing. Have you done a battery pull? And then tried to enter recovery?
Sent from my SGH-T999 using xda app-developers app
monkeypaws said:
Did you flash the latest recovery? Did you wipe data when flashing to a 4.2.2 aosp ROM from 4.1.1 tw? You'll need to do that before and not dirty flashing. Have you done a battery pull? And then tried to enter recovery?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
It auto-wiped to upgrade to 4.2.2, so if there is a way to downgrade it to get it to work, I'd love to know. At the moment all I can access is the Clockwork Mod boot list from the vol+pow+home route. Did a battery pull and entered recovery. Still nothing. If I try to boot without going through the vol+pow+home method, it just vibrates and then nothing.
Update recovery.
Wipe everything except sd cards.
Install rom.
Install Gapps.
Factory reset.
Done.
Aerowinder said:
Update recovery.
Wipe everything except sd cards.
Install rom.
Install Gapps.
Factory reset.
Done.
Click to expand...
Click to collapse
I formatted everything from that vol+pow+home menu.
Gapps? Is that something I should install from SD?
Sorry, I'm just a bit overwhelmed by something I thought would be easy...
OneIdiotInATree said:
I formatted everything from that vol+pow+home menu.
Gapps? Is that something I should install from SD?
Sorry, I'm just a bit overwhelmed by something I thought would be easy...
Click to expand...
Click to collapse
Gapps are Google apps that are required to flash after flashing an aosp ROM. They are usually included as a separate download in the first post of the wrong you are downloading. Make sure you download the right gapps. There shod be a setti ng in cwm to turn on USB connection when connected to comp. So you can load the gapps to your SD card. Then re wipe phone through recovery, reflash the rom , the in the same menu reflash gapps. Then reboot. It should then load properly . Otherwise. If you can access download mode, restore stock rom with Odin, reroot and try again from step one.
Sent from my SGH-T999 using xda app-developers app
If you fix your phone try using twrp instead of cwm thats what i had to do and DL the 2013 version of gapps. I have the latest pacman ROM and the only thing i had to do after install was clear data and cache for the rom control via apps-all-rom control. Well hope this helps.
Sent from my SGH-T999 using xda app-developers app
SamsungGui said:
If you fix your phone try using twrp instead of cwm thats what i had to do and DL the 2013 version of gapps. I have the latest pacman ROM and the only thing i had to do after install was clear data and cache for the rom control via apps-all-rom control. Well hope this helps.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Alright, I just installed both LiquidSmooth again followed by GApps, factory reset the phone, and restarted. Now the phone will not start up (even the vibration) or allow a shift into cwm. Why did this happen? Is there a way to reverse this since now I've lost the ability to even access the cwm?
At this point, I just want to restore to the original loadout, but I've been unable to do that too.
By the way, I do appreciate all the advice on this problem. I'm frazzled beyond belief and have a very expensive paperweight currently.
OneIdiotInATree said:
Alright, I just installed both LiquidSmooth again followed by GApps, factory reset the phone, and restarted. Now the phone will not start up (even the vibration) or allow a shift into cwm. Why did this happen? Is there a way to reverse this since now I've lost the ability to even access the cwm?
At this point, I just want to restore to the original loadout, but I've been unable to do that too.
By the way, I do appreciate all the advice on this problem. I'm frazzled beyond belief and have a very expensive paperweight currently.
Click to expand...
Click to collapse
Make sure you have the ROM of choice and compatible Google apps on your SD card.
Now do the following
1. Pull battery out of phone
2. Put battery into phone
3. Boot into recovery (volume +, home button, power button)
4. Wipe cache
5. Wipe dalvik cache
6. Wipe data/factory reset
7. Install ROM
8. Install gapps (Google apps)
9. Wipe cache
10. Wipe dalvik cache
11. Reboot phone
Once booted up and logged into Google account, go to play store, search for goo manager, download goo manager, open goo manager and press the menu button and install the open recovery script....now you'll have twrp (team win recovery project).
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|
707BeastMode707 said:
Make sure you have the ROM of choice and compatible Google apps on your SD card.
Now do the following
1. Pull battery out of phone
2. Put battery into phone
3. Boot into recovery (volume +, home button, power button)
4. Wipe cache
5. Wipe dalvik cache
6. Wipe data/factory reset
7. Install ROM
8. Install gapps (Google apps)
9. Wipe cache
10. Wipe dalvik cache
11. Reboot phone
Once booted up and logged into Google account, go to play store, search for goo manager, download goo manager, open goo manager and press the menu button and install the open recovery script....now you'll have twrp (team win recovery project).
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|
Click to expand...
Click to collapse
I finished most of these steps, but when I rebooted my phone after installing both LiquidSmooth and Gapps, it refused to start. Now I can neither turn it on or go back into recovery mode. The phone is just dead now. What would cause this? I've taken the battery (and everything else for that matter) out again and again, charged it for the last hour, and nothing has changed.
Okay follow this to get to stock and make sure it can at least do that. http://forum.xda-developers.com/showthread.php?t=2136921
Sent from my SGH-T999 using xda app-developers app
OneIdiotInATree said:
I finished most of these steps, but when I rebooted my phone after installing both LiquidSmooth and Gapps, it refused to start. Now I can neither turn it on or go back into recovery mode. The phone is just dead now. What would cause this? I've taken the battery (and everything else for that matter) out again and again, charged it for the last hour, and nothing has changed.
Click to expand...
Click to collapse
Are you sure you have a T-Mobile phone?
monkeypaws said:
Okay follow this to get to stock and make sure it can at least do that. http://forum.xda-developers.com/showthread.php?t=2136921
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the set of instructions, but I am unable to either start it (power button), put it in cwm (pwr+up+home) or download mode as mentioned (pwr+down+home). I don't get a vibration; I don't get anything. Is this totally bricked now? Since the device isn't on, I can't do anything with Odin or the SD card.
What country do you live in, and how did you acquire your phone? Looks like you maybe have the intl version.
I would say try to get into download mode with the physical bottons if that dint work try a jig u can get on ebay like 5 bucks they are always handy.if u can get in to dl mode odin a root66.tar then install recovery.if that dobt worj u prib install liquid rom but fir diff device abd hard brixk u f that case hope u have insurance ti replace they will never know u rooted ir have it jtaged
Its bricked, jtag repair only way .
Stop flashing in my opinion theres a huge issue with the t999 rom compatility and someone mentioned of tw roms being labeled as aosp.roms,I would root but stay away from flashing.until someone figures this out .Theres way to many brick topics lately i find to be oddly connected to the same causes .
Some will say bs but trust me theres something going on..even the most experienced flashers are bricking the t999 its to me the most easiest brickable device i ever delt with.
lojak29 said:
Its bricked, jtag repair only way .
Stop flashing in my opinion theres a huge issue with the t999 rom compatility and someone mentioned of tw roms being labeled as aosp.roms,I would root but stay away from flashing.until someone figures this out .Theres way to many brick topics lately i find to be oddly connected to the same causes .
Some will say bs but trust me theres something going on..even the most experienced flashers are bricking the t999 its to me the most easiest brickable device i ever delt with.
Click to expand...
Click to collapse
it honestly sounds like he has he international version not the US variant. so i think thats the mistake not the phone
lojak29 said:
Its bricked, jtag repair only way .
Stop flashing in my opinion theres a huge issue with the t999 rom compatility and someone mentioned of tw roms being labeled as aosp.roms,I would root but stay away from flashing.until someone figures this out .Theres way to many brick topics lately i find to be oddly connected to the same causes .
Some will say bs but trust me theres something going on..even the most experienced flashers are bricking the t999 its to me the most easiest brickable device i ever delt with.
Click to expand...
Click to collapse
99% of the bricking is user error...the reason for the increase in "bricked" topics is cause by the amount of users of the T999...its the most heavily used phone by a wide margin now.
Ive far from an expert but have been flashing since the G1 days and have experience with many phones...in my opinion the t999 is darn near unbrickable unless you didnt follow the directions or use a reputable developer when selecting a rom...
To the OP:
What is the actual model of your phone ? you came with an issue and have not really posted much about the specifics of your phone...
sounds like your phone is not partitioned correctly which probably happened by not following the correct directions
there is so much more info needed to diagnose your issue its silly...
Ive been using wicked roms from day one on the t999 and I dont remember seeing anyone hardbrick a phone yet and there are thousands of users using wicked roms...
---------- Post added at 10:58 AM ---------- Previous post was at 10:16 AM ----------
Also...was your phone charged when you last tried to flash something? long ago my phone died while flashing ( lessoned learned) ...
pull the battery for awhile...put it back in and try to charge it...
then try to odin back to stock after its charged...
Even if AOSP and TW ROMs were labelled wrong... what difference would it make ? Sure, it could be misleading and all but it's hardly going to brick a phone just give you something you might not have exactly wanted (if that's even actually happening).
I also wonder if this phone is actually an International version instead of the T-Mobile one.
OP, it looks like you need JTAG repair now. If you don't honestly know what exact model you have talk to the JTAG repair service people about it - since they can most likely JTAG either they can just tell you which phone you have once they've fixed it.
Pennycake said:
Even if AOSP and TW ROMs were labelled wrong... what difference would it make ? Sure, it could be misleading and all but it's hardly going to brick a phone just give you something you might not have exactly wanted (if that's even actually happening).
I also wonder if this phone is actually an International version instead of the T-Mobile one.
OP, it looks like you need JTAG repair now. If you don't honestly know what exact model you have talk to the JTAG repair service people about it - since they can most likely JTAG either they can just tell you which phone you have once they've fixed it.
Click to expand...
Click to collapse
OP just has to remove the battery cover and battery and bam! There's a label with Sammy's logo along with device model and other info about the phone.
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|