Related
when I went to preorder my evo ( ) I asked about the dock. the guy there said he thought it would run around $60-$100. what do you guys think? I'm getting it no matter what but I just hope its not $100+
gmelchert said:
when I went to preorder my evo ( ) I asked about the dock. the guy there said he thought it would run around $60-$100. what do you guys think? I'm getting it no matter what but I just hope its not $100+
Click to expand...
Click to collapse
IMHO $60+ for a simple dock is ridiculous... Heck, anything over 30 is way too much in my book.
well if a hdmi connector costs 40 bucks (absolutely retarded price gouging) then a hdmi dock at that price is not out of the question. Would I get one? depends on if it's for the car or desk, for a car...hmm... maybe... desk, no
either way it better have power+data+audio line out + hdmi all from one connector... and it better not look like dr frakenstein designed it... .or dr seuss =P
I can deal with something under 50$ MSRP, so that it will hopefully be less online. I think I'll take a crack at making my own dock. Just put the phone with cables connected into rubber cement or something similar. Maybe not though as I hate to waste cables
ya HDMI cables are dirt cheap at tigerdirect or similar.... I'll hackup a regular dock and make my own dock..or just lay it on the desk w/the kickstand.
You know these will be awfully expensive since Sprint's freaking car chargers are lke 30+ bones.
Anything OEM will cost you up the ass.
HTCPedia's site is selling some accessories (with a pic of the dock with no price yet)
I am looking for an all clear case. has anyone seen any online?
bhagiratha said:
I am looking for an all clear case. has anyone seen any online?
Click to expand...
Click to collapse
here you go... http://store.cheapdroids.com/Amzer-Clear-Snap-On-Crystal-Hard-Case-EVO.html
jvs60 said:
here you go... http://store.cheapdroids.com/Amzer-Clear-Snap-On-Crystal-Hard-Case-EVO.html
Click to expand...
Click to collapse
damn that sucks they are covering the front-facing camera and most likely teh back kickstand too
Besides docks that have special things like the HDMI... I'm interested in the docks that may automatically trigger modes, like on the Moto Droid where the desktop dock triggers an alarm clock/media center mode, the car dock triggers the navigation and music. I thought I saw the Evo would do this as well.
If anyone's interested in saving a couple bucks and are looking for something like that as well, here's an old article about someone who created a fake dock using a piece of cardboard with magnets on it. The magnets, in the proper position, tell the handset which mode it should be in:
http://www.engadget.com/2009/10/28/how-to-hack-your-own-droid-dock-with-magnets-and-cardboard/
Could probably add magnets to a 'dumb dock' to simulate this if the EVO supports it as well.
gryffyn said:
Besides docks that have special things like the HDMI... I'm interested in the docks that may automatically trigger modes, like on the Moto Droid where the desktop dock triggers an alarm clock/media center mode, the car dock triggers the navigation and music. I thought I saw the Evo would do this as well.
If anyone's interested in saving a couple bucks and are looking for something like that as well, here's an old article about someone who created a fake dock using a piece of cardboard with magnets on it. The magnets, in the proper position, tell the handset which mode it should be in:
http://www.engadget.com/2009/10/28/how-to-hack-your-own-droid-dock-with-magnets-and-cardboard/
Could probably add magnets to a 'dumb dock' to simulate this if the EVO supports it as well.
Click to expand...
Click to collapse
I doubt the EVO has the magnets in it to activate different modes. None of HTCs phones have yet (to my knowledge).
HTC6800 said:
I doubt the EVO has the magnets in it to activate different modes. None of HTCs phones have yet (to my knowledge).
Click to expand...
Click to collapse
You're probably right. Thought I saw something about the EVO's car mount that sounded like it did something like this. But god knows the kind of stuff my brain thinks it reads when I'm half awake.
Anyone found a good car windshield mount for using GPS?
All the ones I've seen looks like they'd block view and are all designed to hold it vertically. (Would be be afraid of it falling out if there were not support on all 4 sides)
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
down8 said:
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
Click to expand...
Click to collapse
I actually like that one... My phone doesn't get here until Tuesday (hopefully) but this looks like a great option
i like the samsung one actually, looks sturdy and secure, and the details say it comes with a suction cup windshield mount and a dash mount. I signed up to be notified of when the backorder clears up. Considering I cleared up my phone's gps issues today, i'm actually excited for this.
larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
Click to expand...
Click to collapse
I like that mount let us know how you like it.
speoples20 said:
I like that mount let us know how you like it.
Click to expand...
Click to collapse
actually have it here now (came in the other day) and i was more impressed with it than i expected to be - the mechanical functions of the suction lock handle &
the knob that tightens the ball socket at the back of the holder (that socket that lets you finitely adjust angle 3 dimensionally) is actually impressively solid
the plastic holder shell, once i got it on the bracket, is stronger than i imagined - for $11 shipped, i'm happy and may just stay with this one
I bought this one
http://cgi.ebay.com/UNIVERSAL-CAR-M...Accessories&hash=item1c1429513c#ht_2148wt_784
It's tiny, I love it
larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road ...
Click to expand...
Click to collapse
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
dublued said:
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
Click to expand...
Click to collapse
wouldn't take much to cut a hole in it, but that isn't a bad idea - i've actually had moments where i thought about getting one everytime some idiot nearly causes an accident by cutting in front of me, from 2 lanes over to make an exit ramp he shouldn't be trying to make, only to hit the brakes hard just as he's in front of me (the cabs in vegas have em)
I got one that mounts in the cup holder. In my truck the windshield is too far away but there is a cup holder in the perfect position. The main cup holder that I use is still open so I don't lose anything. Also, it rotates to landscape mode (either direction) with a click.
http://www.amazon.com/Bracketron-UC..._1?ie=UTF8&s=automotive&qid=1279480388&sr=8-1
yea i guess it wouldn't take too much effort to take a dremel to the mount and make a hole for the camera.
Some one a few posts up linked to a very small mount that would leave the top of the phone uncovered.
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
http://www.proclipusa.com/
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
diaa08 said:
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
Click to expand...
Click to collapse
looks really nice, but hella expensive once you add the car mount and the device holder. i thought samsung's was expensive, but unless there's some huge benefit to the proclip i'm going to probably get samsung's or a 3rd party generic mount like arkon's universal mount
well the advantage such as it is is that once you buy the car mount it works for all devices in the future and fits your specific car like a glove. especially useful if you have a unique car (i drive an element) where suction mounts or other things don't work. i know its expensive, but i've found it to be worth it. my devices never fall or hit anything or vibrate and are always exactly within arms reach. definitely an investment though.
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
dublued said:
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
Click to expand...
Click to collapse
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
diaa08 said:
....they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done....
Click to expand...
Click to collapse
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
siberslug said:
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
Click to expand...
Click to collapse
How do you put it into car mode?
jblade1000 said:
How do you put it into car mode?
Click to expand...
Click to collapse
I'm pretty sure you could install that one car app on the Vibrant. I forgot what it was exactly called. Anyways, go to Settings > Text to Speech > Driving Mode.
jblade1000 said:
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
Click to expand...
Click to collapse
i think you might be right... i know they are usually very specific about testing and stuff, so if that's the case im sure they will update the listing to say its available for both. on the hd2 the dimensions were slightly off and they had a mount for the tmous hd2 out about three days after launch.
EDIT: looking at official specs, the vibrant is supposed to be 0.3mm wider, for what its worth
dunno about the car mode, but doesn't sound like its the same thing. the question would be: does the vibrant have a magnetic sensor? otherwise its just going to have to be some kind of app, which i do not believe is included, but might be available on market...
Has anyone bought this?
http://www.ebay.ca/itm/USB-Sync-Cra...751912?pt=PDA_Accessories&hash=item3cbfabe768
After using a similar dock for my Nexus One, I think I'm hooked to them. mainly because I can use the phone as a desk clock when I sleep and it's also easier to debug/run apps from Eclipse and not pick up the phone to use them every time.
All I'm concerned about it that because there's no reinforcement at the front, it might be a lot of stress on the mirco-usb port. Any thoughts?
I would rather buy this cradle from Kidgi
http://kidigi.com/product_lv2.php?pid=1356
Looks geat and I know quality is good. Already own acouple of dock from them for a Defy and HD2. Pitty no pogo pins though. I sent Kidigi an email asking about futre docks usng tem and their prompt reply wasthat they are looking into it.
Those both look really nice for portrait docks... And I seriously can't decide if I'd prefer a portrait or landscape...
If I go for landscape, I think the best, although definitely not cheapest, solution would be to stick the official battery charger and cradle together with plastic velcro so that I'd have them together all the time, then when I go on a trip and need a second battery and stand, I'd just disconnect them and take that part.
...oei I overcomplicate things, haha.
atomic_dude said:
I would rather buy this cradle from Kidgi
http://kidigi.com/product_lv2.php?pid=1356
Looks geat and I know quality is good. Already own acouple of dock from them for a Defy and HD2. Pitty no pogo pins though. I sent Kidigi an email asking about futre docks usng tem and their prompt reply wasthat they are looking into it.
Click to expand...
Click to collapse
Damn, that does look nice! Can you let us know when it's available?
Thanks!
Knolly said:
Those both look really nice for portrait docks... And I seriously can't decide if I'd prefer a portrait or landscape...
If I go for landscape, I think the best, although definitely not cheapest, solution would be to stick the official battery charger and cradle together with plastic velcro so that I'd have them together all the time, then when I go on a trip and need a second battery and stand, I'd just disconnect them and take that part.
...oei I overcomplicate things, haha.
Click to expand...
Click to collapse
I need portrait since I'll then probably be using it to test out apps without picking up the phone. A landscape dock would defeat the purpose
atomic_dude said:
I would rather buy this cradle from Kidgi
http://kidigi.com/product_lv2.php?pid=1356
Looks geat and I know quality is good. Already own acouple of dock from them for a Defy and HD2. Pitty no pogo pins though. I sent Kidigi an email asking about futre docks usng tem and their prompt reply wasthat they are looking into it.
Click to expand...
Click to collapse
Looks really good. I'll probably buy this one instead. I think I saw one like this for the NS on ebay some time ago too.
Thanks!
They have it up for pre-order now:
http://www.4u-mobi.com/onlineshop/shopping_cart.php
A bit steep though
Your link referes to your shopping cart ...
http://www.4u-mobi.com/onlineshop/online_shop_detail.php?pid=5788
mh, $40 ... expected it to be cheaper, but so far the best dock I have seen around
i wish they offered HDMI on the dock that charges the 2nd battery as well really looks like a quality product though
Does the GSM version fit in the one wihtout the 2nd battery charger ( US$ 27.99 ) and some who know when it is in stock?
smckdwn989 said:
i wish they offered HDMI on the dock that charges the 2nd battery as well really looks like a quality product though
Click to expand...
Click to collapse
Verizon makes a desktop cradle with HDMI output
A store associate showed me the picture of it last month when I was purchasing a case for mine.
They said it should be available around launch time of the device.
I just looked on Verizon's website and didn't see anything
Sent from my Galaxy Nexus using XDA App
Got my Ram Mount X-Grip today (http://www.ram-mount.com/NewProducts/xgripholder/tabid/3687/Default.aspx#). Was worried it might not fit the note because it says max width of 3.25 inches. But it fits with enough room to spare that I could probably have it in a case.
See attached pictures. I like it a lot, I have mounts on my cars and on my bicycles but not sure if I will trust my Note to a spring loaded mount on a bicycle.
I need to find a widget / application that will let me toggle the screen timeout on and off when it is powered.
I have bluetooth in my car stereo. I wonder if there is an app that will let me keep the screen awake when it is connected to power and linked to my stereo?
Yeah, I know my screen protector is crap. I'm leaving it on until I get something better.
David
My cheap chinese holder achieves the same thing.
Does yours cover the camera? Mine has a cam-hole
ekin said:
My cheap chinese holder achieves the same thing.
Does yours cover the camera? Mine has a cam-hole
Click to expand...
Click to collapse
No, it does not cover the camera. It is a little more rugged and secure than the cheap Chinese cradles.
It is also a lot easier to get it exactly where you want it with no vibration. I've got a few RAM mounts on various vehicles so this is a good accessory for me.
David
DJ_smooth said:
I need to find a widget / application that will let me toggle the screen timeout on and off when it is powered.
I have bluetooth in my car stereo. I wonder if there is an app that will let me keep the screen awake when it is connected to power and linked to my stereo?
Click to expand...
Click to collapse
I use Llama (Location Aware Mobile Application). It does a lot of things like this. I get it to prevent locking when I am at home of work, for example, and control sound in different places or in meetings, and it does all my power control based on batter level much better than most power controllers IMO.
It's also free, but I urge you to support the developer if it is useful to you (I have no affiliation BTW).
Hey would you trust this mount for use on a motorcycle? I already have a bunch of ram mounts so I know they're good quality, just need the x-grip for the note.
Tasker should be able to help you with all the above screen requirements. It's like Llama, but more advanced.
To bring an old thread back- to the OP- can you take a picture of how much clearance there is with the X-Grip all the way open? I'm considering this for my Note, but I'm running a case, and will be going to a bigger/more protective one when one I like becomes available.
over2land said:
To bring an old thread back- to the OP- can you take a picture of how much clearance there is with the X-Grip all the way open? I'm considering this for my Note, but I'm running a case, and will be going to a bigger/more protective one when one I like becomes available.
Click to expand...
Click to collapse
Will try when I get off work... sorry I dropped off this thread, life got busy. Will update with answers. I am interested in the Seidio case with the kickstand so I hope the clearance works too.
David
over2land said:
To bring an old thread back- to the OP- can you take a picture of how much clearance there is with the X-Grip all the way open? I'm considering this for my Note, but I'm running a case, and will be going to a bigger/more protective one when one I like becomes available.
Click to expand...
Click to collapse
Hard to get a great picture, not enough hands to pinch the arms springs, steady the not, and take the picture. Clearance is about 5mm so it would be close.
In reference to the motorcycle, yes I would trust it for any conditions up to a wreck. I had a nokia N810 in a ram mount when I wrecked a few years ago and it popped loose but it held nicely under all normal conditions.
This would be perfect is that little remaining gap is enough to allow a seidio.
Chief Geek said:
This would be perfect is that little remaining gap is enough to allow a seidio.
Click to expand...
Click to collapse
That is my hope as well. Just waiting on the kickstand version of the Seidio. Makes me want to go to their Houston offices right down the road and beg for a prototype...
David
http://www.expansys.com/htc-one-x-d...tm_medium=shopping&utm_campaign=base&ito=1701
Considering getting one of these when they are released... I just wanted to ask if anyone has read about the wattage? If it works as a decent speaker I'd be more than tempted. If it's a measley 2.5W pile of nothing I might not bother...
i dont think the speaker will be anything good, more about just puttng the phone on a dock, but i do think its overpriced for what it is, but i love the idea of it.
I just think perhaps the wattage could be the decider... if it's good it'll be reasonable value. I suspect it might not be though
I think its more "gentle" to put the phone on a cradle like this then fiddle in the plug every night isnt it?!
Be warned that if you want to use a case on the phone and still dock it, the ONLY hard case that seems to let the "pins" of the dock reach the back of the phone is the HTC HC C704 which stupidly doesn't have a clear version like the HTC HC C700. The C700 is missing the holes!! Very odd design choice by HTC
Poor thing! And the c704 don`t seems to protect the ring around the lense of the cam.
You can't protect the ring on the camera with the docking cases because the dock has a groove that holds the camera, and the extra protection would make it sit in the dock less securely(because it can't sit flush to the dock). I believe that is why they differentiated the cases.
jonstatt said:
Be warned that if you want to use a case on the phone and still dock it, the ONLY hard case that seems to let the "pins" of the dock reach the back of the phone is the HTC HC C704 which stupidly doesn't have a clear version like the HTC HC C700. The C700 is missing the holes!! Very odd design choice by HTC
Click to expand...
Click to collapse
But there is a white and a grey version to match each colour of the phone.
For me, the dock is tempting for work to keep it charged and sync my outlook calendar.
Is anybody interested in cheaper version with only pogo-pin charging? It seems that pogo connectors are availiable from chinese producers, we just need to design the case and electronics I would throw in my 20 Euro for a good designed product.
Let me know if you are interested in kickstarted project.
chortya said:
Is anybody interested in cheaper version with only pogo-pin charging? It seems that pogo connectors are availiable from chinese producers, we just need to design the case and electronics I would throw in my 20 Euro for a good designed product.
Let me know if you are interested in kickstarted project.
Click to expand...
Click to collapse
I'm interested. I only want charging really, not bothered about a crappy speaker
Si
love the idea!
make it a clean design, and my money is yours
maybe a hdmi connector too? <- would pay more for that maybe as special version?
The main thing putting me off about this dock is the angle at which the device will sit, as far as I'm concerned it's far too shallow.
I agree with my Rotherham friend. I'm not interested in it doing anything fancy then
Charge the device
Make it enter dock mode
Look pretty
Si
I like it, I might get one for work, so I can clearly see my phone screen when I'm at work.
I'm guessing if the phones in the cradle then Sense 4.0 will go landscape?
I would buy a cheap dock for charging.... hdmi sounds good but I guess the cost will slowly creep up....
BigladUK said:
I'm interested. I only want charging really, not bothered about a crappy speaker
Si
Click to expand...
Click to collapse
Theres someone selling a desktop charger in ebay UK
vanngoh said:
Theres someone selling a desktop charger in ebay UK
Click to expand...
Click to collapse
Can you link to it ?
Si
a link please ..?
All docks that are available now use micro USB not the pogo pins! I thought about starting a project but I'm lacking electronics skills... A friend of mine can model the product in CAD and I could find a way to print a prototype in 3D but first pogo pin charging needs to be reverse engineered and tested. I think HTC may have added some kind of accessory verification...
Is there anyone who've bought this cradle already?? The want to buy one, if the connection between the dock and telephone is good. So if there is anyone who've bought it could you give a review??
Sent from my HTC One X using XDA