So i recently rooted my phone using the donated version of the toolkit so I get my firmware version, but found out that its the same for t889 and t889v. Also, I then went and installed CWM and then I flashed Jedi X 7.2. However, after doing all this, I can't use the samsung apps, for instance the reader hub or the video hub. It says invalid device ID. Any solutions?
Related
First of all, let me start by saying this, my note 2 i317 or my previous GS3 i747 never successfully connected to my macbook pro running mountain lion. On my ATT S3, i have tried stock TW and other versions, CM and AOKP, no luck. And on my ATT Note 2, I have tried stock TW, and the other TW versions like Clean rom, Jedi and Skynote, CM builds and JellyBam (not xda supported), and still no luck. And yes i do have Android File Transfer installed on my mac.
Now this is where it gets interesting.
My friend's international S3 i9300 connected successfully, compared to a few ATT s3 and a verizon s3 that I have tried with no luck. Weird
And now that I flashed Beanstalk and also Liquidsmooth and now my model has changed to N7105 on the build, it successfully connects. Weird. So once the build changes from i317 to n7105, it connects?
This might just be a coincidence or just Apple not wanting us to buy android phones sold in the US.. Lmao.. just my 2 cents..
I would like to know your experience with connecting your note 2 to mac
As long as the device is unlocked, I've had no problems connecting my i317 to my Mac Pro with Android File Transfer. This is using rooted stock and Clean Rom AT&T SE 1.5/2.0.
You can also use the S3 UMS file transfer program. It give you disk access to your SD card. AFT can be used on a mac as noted above as well
Just got Samsung Nexus Korean maguro variant yakju with 4.1 installed and with Baseband: UGKL1 and my network is Warid Tel - Pakistan. I used my local sim in as well and it was working fine. Today I tried to use custom 4.3.1 in it and so I done these steps:
Downloaded Nexus Root Toolkit, Android SDK, Latest Nexus drivers and all pre-requisites before starting. Now I first started to unlock my Bootloader with matching requirements as the tool already do this. Then flashed cwm touch recovery and applied root. I tool backup of my stock rom via cwm and then wipe all and installed liquidsmooth 2.7 which is jb 4.3.1 and it worked like a charm. What i noticed afterwards that the rom is reading my carrier details correctly but also showing Emergency call only warning as well. I tried Edge as well and it was wokring normally but when i tried to dial a call and tried to send txt it showed me Mobile network not avaialable. Then I tried all latest radio basebands on it, tried all settings SMSC and normal troubleshoots but couldn't get complete carrier support. Then I restored my default stock rom via cmw and boom no issues like it should be. Now my question is did I missed something for it? or am I flashing wrong basebands? or somthing else? After too many hours i felt that I cannot go further from here. I am attaching my screenshots. Please if anyone can tell me or guide me I will be very thankful to him as I haven't tried my phone yet, just got it. I had HTC evo 3d and its setup of everything never got me stucked like this.
Anybody up for help kindly
Sent from my Galaxy Nexus ...
Help! I rooted my Galaxy S3 about 3 months ago. I wanted to return it to stock without root so I could use the stock recovery and receive the new 4.4 OTA. I found a file online off a YouTube video that I thought was for my phone. I flashed it using mobile ODIN and when it powered back up, I had no mobile network and could not make or receive calls. I tried another file I downloaded and I installed from zip when I was in receovery and now the phone will not power up and does not have the light on when its connected to a charger. It seems to be dead.
I installed from zip because it kept failing when I tried to use ODIN on my computer.
How do I fix? Can it be fixed? I don't know anything about all the technical stuff such as modems, kernels, etc. I should have left it alone!
Any suggestions?
It's an AT&T Galaxy S3 SGH-1747
marshall7678 said:
Help! I rooted my Galaxy S3 about 3 months ago. I wanted to return it to stock without root so I could use the stock recovery and receive the new 4.4 OTA. I found a file online off a YouTube video that I thought was for my phone. I flashed it using mobile ODIN and when it powered back up, I had no mobile network and could not make or receive calls. I tried another file I downloaded and I installed from zip when I was in receovery and now the phone will not power up and does not have the light on when its connected to a charger. It seems to be dead.
I installed from zip because it kept failing when I tried to use ODIN on my computer.
How do I fix? Can it be fixed? I don't know anything about all the technical stuff such as modems, kernels, etc. I should have left it alone!
Any suggestions?
It's an AT&T Galaxy S3 SGH-1747
Click to expand...
Click to collapse
sound like you've hard bricked your phone
here's the fix: http://forum.xda-developers.com/showthread.php?t=2549068 BE SURE TO READ IT THOROUGHLY
if that doesn't work for you, JTAG is your way out
Hi,
I recently rooted an Ace 2 that came to my hands and flashed the CM11 found here.
After this wifi wasnt working so I tried some other MODEM drivers with no success.
Decided that I'd prefer having a WiFi enabled phone even with stock rom, I flashed the Stock one found on Sammobile for the phones' carrier.
Carrier is Bell Canada by the way.
After flashing the stock rom, phone refuses to get into recovery mode, and also refuses to open in generaly, staying in the GT-S7560 bootup screen for an eternity (or at least the 7 hours I left it open).
Phone works in Download mode however, except whatever I do there is like pointless, since nothing happens.
So a quick view is:
1) Bell Canada
2) S7560MVLBNA5
3) Recovery doesn't work
4) Download mode works
5) Phone won't start
If anyone can point me to something I would appreciate it, and as of searching before posting, I did search but found 0 similar problems, since everyone elses semi-bricked devices, worked like a charm after stock rom was installed.
Thanks in advance.
Okay so i have the T-Mobile Galaxy s3. It has been rooted for a while with zero problems. I got tired of the older android on it and decided to install a rom. I installed Cyanogenmod 13.0-20151208-unofficial-d2tmo running android 6.0.1. When i first got it all booted and loaded with gapps, i noticed that it recognized my sim and that i had a signal but i couldn't use any LTE or just all around data. basically i couldn't go online (in case i just didn't explain that well enough. Phone service is a mystery to me). I did some searching online and found a lot of people saying that i needed to update my baseband. i found a baseband for my model (T999) and tried to flash it in TWRM. Once i rebooted, it said "No SIM card - No service." in the upper left-hand side. i have tried flashing multiple different basebands the same way with no luck. i tried backing up my EFS folder and the restoring it because someone said to do that and that just... just no... it didn't do anything. even Odin 3 said it was a "FAIL!". So here i am with this android equivalent to an Ipod and i hate this. Everything else in this ROM works perfectly aside from this but this is a super big problem. PLEASE HELP!!!! A phone isn't a phone if you cant even send a text.
Did you update the phone's bootloader and modem to the latest version before flashing CM?