keep getting the error assert failed: getprop ("ro.product.device") == " d2tmo" | | getprop (ro.build.product") = = "d2tmo " E: error in/sdcard/cm10.1 etc.... message when trying to flash any, suggestions ?? happens with the cm10 official build and kangs (euroskank) and paranoid android builds and etc... only build I can get to work is the aokp nightlys from the xda site
Edit/solved: did a lil more searching and found the soloution just had to flash the latest cwm from rom manager. Going to leave this up incase anyone else has the problem
Related
Tried this on Inspire 4G and I got the following error message,
assert failed: getprop("ro.product.device") == "brovo" ll getprop("ro.build.product") == "brovo" E:Error in /sdcard/rom/qiss_me-htc-desire-tw-12.06.08.zip
(status 7)
Not sure if there is something wrong with the rom or that it just won't work on an Inspire4G. Please let me know if anyone can help me out. Thanks
Flashing Rom
If you haven't already, try this link to confirm their procedure, I came from CM latest beta to this without any problems.
Just an FYI they are currently on qiss_me-htc-dhd-tw-02.06.22.zip Beta.
I am using ADWLauncher EX their themes are Butt ugly to me.
Good luck and let me know either way. Add http
://tw.qiss.mobi/download.php?mode=teaching_content_dhd#.T-U_bvWrQce[/url]
I have recently setup a Ubuntu box and can build d2spr (GS3) builds of CM 10.1. I can load the built zip on my phone and everything runs fine but I have no IMEI or phone service. What am I doing wrong?
bry7 said:
I have recently setup a Ubuntu box and can build d2spr (GS3) builds of CM 10.1. I can load the built zip on my phone and everything runs fine but I have no IMEI or phone service. What am I doing wrong?
Click to expand...
Click to collapse
I think it might have to do with the fact that I removed the following line from the "META-INF\com\google\androidupdater-script" file:
assert(getprop("ro.product.device") == "d2spr" || getprop("ro.build.product") == "d2spr");
I removed that line because the flash was getting STATUS 7 ERROR. Seems like that might not be the correct solution.
Thoughts?
I've done everything that it says to do in the install directions, I've read through the troubleshooting, nothing works. I persistently dead end with this:
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : Dirty RootBox
ROM Version : v2.0
ROM Author : mlaws90
Device : grouper
Start at : Sun Mar 15 12:15:40 1970
==========================
====Dirty RootBox v2.0=====
=======By:mlaws90=========
=========AROMA==========
=======Pie Controls=======
Build Date: Sat Feb 16 13:15:24 CST 2013
>>-Checking Device...
script aborted: assert failed: getprop("ro.product.device") == "grouper" || getprop("ro.build.product") == "grouper"
assert failed: getprop("ro.product.device") == "grouper" || getprop("ro.build.product") == "grouper"
Installer Error (Status 7)
End at : Sun Mar 15 12:15:40 1970
I'm downloading this from the link that I found here. I'm trying to upgrade from Root 66 (JB 4.1.1), I've wiped EVERYTHING off my phone (excluding the internal and external user storage) and I still have this issue. For s$&ts and giggles, I tried installing DRB over R66 and still get the same error. It doesn't matter what options I do or don't select, or what kernel I choose. I even bothered to trip the counter and try flashing from ODIN - which left me staring at the GS3 boot logo for an hour before I decided to abandon and restore my back up.
How do I make this work on my SGH-T999?
Is your recovery up to date?
Sent from my SGH-T999 using xda premium
seattlestexan said:
script aborted: assert failed: getprop("ro.product.device") == "grouper" || getprop("ro.build.product") == "grouper"
assert failed: getprop("ro.product.device") == "grouper" || getprop("ro.build.product") == "grouper"
Click to expand...
Click to collapse
Looks like you are trying to flash a rom that isn't for your phone. Looks like it's actually for a tablet. Lucky for you the author put an assert check in before the flash. Because you almost bricked your phone.
Aerowinder said:
Looks like you are trying to flash a rom that isn't for your phone. Looks like it's actually for a tablet. Lucky for you the author put an assert check in before the flash. Because you almost bricked your phone.
Click to expand...
Click to collapse
True.
I don't get it. I see ROM's listed as for the T999, then they either don't work, or they end up being for something else. I was looking for a good JB4.2.2 ROM, and this was listed for the T999.
I just want a good 4.2.2 ROM with plenty of options for personalisation. I'm thinking that's too much to ask for. Codename Android is the closest to what I want, but it doesn't work with the T999 apparently.
Any suggestions?
Here are your choices for 4.2.2: http://forum.xda-developers.com/forumdisplay.php?f=1690
I've been using CM 10-10.1 since it became available.
seattlestexan said:
True.
I don't get it. I see ROM's listed as for the T999, then they either don't work, or they end up being for something else. I was looking for a good JB4.2.2 ROM, and this was listed for the T999.
I just want a good 4.2.2 ROM with plenty of options for personalisation. I'm thinking that's too much to ask for. Codename Android is the closest to what I want, but it doesn't work with the T999 apparently.
Any suggestions?
Click to expand...
Click to collapse
PAC is pretty heavy in the customization field and it is a 4.2.2 ROM.
Sent from my SGH-T999 using Tapatalk 2
Dandrio v1 is an aftermarket android firmware based on CyanogenMod for Samsung Galaxy S I9000 aka galaxysmtd​
Code:
# include
*
*Your warranty is now void.
*
* I am not responsible for bricked devices, dead sd cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about the features included
* in this rom before flashing it! You are the one choosing to make these
* modifications, and if you point the finger at me because you have a messed up device
* I will simply laugh at you.
*/
Main Rom Features
Fast and stable rom with performance tweaks
Based On CM11 Source
Semaphore KK Kernel
Semaphore Kernel Manager
Xposed Framework included
GravityBox Installed (Fully Working) If gravitybox does not start ensure that you have set up xposed framwork properly and enabled gravitybox in the modules menu
Beats Audio Engine
CM Focal camera app included but for now there is no video recording with this app
GPS.conf tweaks
Art & Dalvik
Although converting to ART is possible I do not recommend it
It will make boot up time considerably longer and many apps may not be compatible
Themes
CM Circle theme is set as default but can revert to stock by changing in theme chooser
Known Issues
None!
Installation Proceedure
1. Wipe Data, Cache and Dalvik Cache
2. Install Dandrio
3. Install Gapps Package
4. Set Up Rom Then Reboot
5. Enjoy Dandrio
Download
Dandrio Rom- Download
GoogleApps- Download
How to report a problem
Just PM me or post it here in the Dandrio thread
Rom Info
ROM OS Version: 4.4.x KitKat
ROM Kernel: Semaphore KK
ROM Firmware Required: Must be flashed from a recent 4.3 or 4.4 build
Based On: CyanogenMod
FAQ
1. I want to turn of transparency to lower ram usage, how do I do this?
Add this line to your build.prop
Code:
ro.config.low_ram=true
2. Do I have to use the included GoogleApps package?
No. If you dont want google apps just dont flash the package!
3. I get status 7 when flashing how do i fix it?
Reboot and try again. Make sure you are flashing from at least 4.3
If this does not work either remove this from the update-script
Code:
ui_print("Checking device ID...");
assert(getprop("ro.product.device") == "galaxys" || getprop("ro.build.product") == "galaxys" ||
getprop("ro.product.device") == "galaxysmtd" || getprop("ro.build.product") == "galaxysmtd" ||
getprop("ro.product.device") == "GT-I9000" || getprop("ro.build.product") == "GT-I9000" ||
getprop("ro.product.device") == "GT-I9000M" || getprop("ro.build.product") == "GT-I9000M" ||
getprop("ro.product.device") == "GT-I9000T" || getprop("ro.build.product") == "GT-I9000T" || abort("This package is for \"galaxys,galaxysmtd,GT-I9000,GT-I9000M,GT-I9000T\" devices; this is a \"" + getprop("ro.product.device") + "\"."););
4.I am getting Invalid Rom (DandrioUpdate) & device (gt-i9000) combo when refreshing updates?
Ignore this message. It is a bug that is displayed when there is no new updates, the reason this is displayed is because for the moment there is not actually any OTA Update Centre support for KitKat. Hopefully the dev will update the app and all will be back to normal !
Development
I am always happy to accept feature requests just pm me or post it here in the Dandrio thread !
Thanks
pawitp & stratosk for semaphore kernel
Hi! Is it possible to dirty flash this on top of another 4.4 KitKat ROM?
Sent from my GT-I9000 using xda app-developers app
jasonham15 said:
Hi! Is it possible to dirty flash this on top of another 4.4 KitKat ROM?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes. You should be able to dirty flash it although i wouldnt advise it as this could cause problems with the firmware, if you run into any problems let me know!
Alternatively just play it safe and backup your current rom using CWM or TWRP, this is the safest bet seeing as Dirty flashing will most likley cause problems. If you backup with CWM or TWRP and then cleanly install my rom you can choose to restore just the data partition so you can run my rom and keep your data !
Cmon guys, Absolutely no feedback at all ?!
Screenshots? I will try to give it a look today
Monkey_Grass said:
Cmon guys, Absolutely no feedback at all ?!
Click to expand...
Click to collapse
I tryed your ROM recently and it feels very smooth, especially with that circle theme. If i try to install and enable Beats audio, DSP Manager crashes i dont know what the problem is, it seems it cant have both ? and Focal also doesn work just black screen appears. Will try it's other features and report after a few hours of usage Thx btw @Monkey_Grass
lulek01 said:
I tryed your ROM recently and it feels very smooth, especially with that circle theme. If i try to install and enable Beats audio, DSP Manager crashes i dont know what the problem is, it seems it cant have both ? and Focal also doesn work just black screen appears. Will try it's other features and report after a few hours of usage Thx btw @Monkey_Grass
Click to expand...
Click to collapse
Thanks @lulek01 and yeah i know about the beats audio engine i am working on it o.0 seems that beats audio is its own automatic dsp manager therefore normal dsp manager won't work :s. And as for focal, it is in beta stages and cyanogen mod have said themselves "Focal is a beta camera app designed by the cyanogen mod team and may not work on certain roms"
When i fix this i will release an ota update
Thanks for the feedback, hopefully my rom will become your main one:good:
Please provide an extra mirror. The ROM link to dropbox says " Error (509)
This account's public links are generating too
much traffic and have been temporarily disabled!"
Sent from my GT-I9000 using Tapatalk
Any feedback on this? What is the battere life, performance, smoothness, etc?
Link fixed
Q&A for [ROM] CosmicROM [AOSP] [5.1] [DarkUI] [22 Mar 2015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CosmicROM [AOSP] [5.1] [DarkUI] [22 Mar 2015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Unable to flash cosmic 5.1 status 7 error
i tried flashing the rom but i got a status 7 error, plz note that i m using an updated recovery and also i have also increased the internal memory of my i9082 in reference to another thread by @k2wl . plz help. the error says this rom is for i9082 and this device is a baffin. what should i do?
open zip then go to /META-INF/com/google/android/ folder and open updater-script with notepad++ or some editor compatible with linux style.
delete first line
" getprop("ro.product.device") == "i9082" || abort("This package is for "i9082" devices; this is a "" + getprop("ro.product.device") + "".");
"
and save file in zip again or if ask update it.
Thanks
dydy_vova said:
open zip then go to /META-INF/com/google/android/ folder and open updater-script with notepad++ or some editor compatible with linux style.
delete first line
" getprop("ro.product.device") == "i9082" || abort("This package is for "i9082" devices; this is a "" + getprop("ro.product.device") + "".");
"
and save file in zip again or if ask update it.
Click to expand...
Click to collapse
thx bro had the same problem will test it nd let u know
getting status error 7 even after flashing the recovery given by you.
error is saying is saying that yours is a baffin. currently i am using cosmic cm version 5.5 buld number KTU84Q.
i cant flash CosmicROM..with recovery philz touch
DJ Minh Bu said:
i cant flash CosmicROM..with recovery philz touch
Click to expand...
Click to collapse
please elaborate on the problem....is their any error message while installation ?
SMS
Hello.
Can I choose an operator for sending SMS, as well as with calls. ("Always ask")
waiting for the update
@k2wl bro wers the new update file we people are eagerly waitin for it dont take me wrong dude bt we all are huge fans of cosmic rom as well as your work hope we get to see the new file soon and we dont have to wait more and great work broda respect for u
Error 7 in build 20150323
@k2wl I downloaded your latest build of 23rd march still m stuck with the same status 7 error i even flashed my recovery again bt still with same trouble help me out as i badly love this rom
can i flash 5.0 gapps on this rom??????
Hello sir, can I flash lollipop 5.0 supported gapps on cosmic 5.1 ROM??????????
Still getting an error
I'm getting Baffin Error
I downloaded the new build posted but ain't working
Any solutions???
aaronjgeorge123 said:
I'm getting Baffin Error
I downloaded the new build posted but ain't working
Any solutions???
Click to expand...
Click to collapse
See post #4 and edit the script and it works
File Manager
I can't find File Manager in this ROM (cosmis 5.1). Please tell me how about it
azri harahap said:
I can't find File Manager in this ROM (cosmis 5.1). Please tell me how about it
Click to expand...
Click to collapse
Pick your favorite file manager from the play store and download it.
You can't find one the rom because there is no file manager included.
The file manager is a CM feature not AOSP, so you will miss more thing
See that is so hard
A small problem
In the 2nd update of this rom the status 7 error was not resolved....so i have tried removing the first line from the updater script....but then after installing and rebooting android logo flashes for a very long time...still not having any luck with it....i have used notepad++ to do all the updating and then again compressed all the files into a zip file....please tell me if i am doing something wrong or if i am missing something....
RichyE said:
Pick your favorite file manager from the play store and download it.
You can't find one the rom because there is no file manager included.
The file manager is a CM feature not AOSP, so you will miss more thing
See that is so hard
Click to expand...
Click to collapse
since cm 12 I never flash GAPPS. I prefer the '1 mobile market' in the hope that is in use less RAM. how do I can have a file manager without having to flash GAPPS? Please help me...
azri harahap said:
since cm 12 I never flash GAPPS. I prefer the '1 mobile market' in the hope that is in use less RAM. how do I can have a file manager without having to flash GAPPS? Please help me...
Click to expand...
Click to collapse
search for file manager in the 1mobile market and you will get allot to choice from
For example
ES File Explore
Solid Explorer
Pls help....
Pls help....
How to root (manual) for galaxy grand duos i9082 - CosmicROM [AOSP] [5.1] ?
Is this ROM support otg cable
I hope to be really