I have my phone in my back pocket, click on my BT headset to make a bluetooth call, finish the call, then click the BT headset disconnect....the screen stays on and i start butt-texting/calling/surfing/etc.
any help would be awesome.
thanks.
Related
I have a HTC Touch Dual.
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
On my TP2, if a call is coming in and I have the bluetooth headset turned on, the headset will pick up the call only if I answer by pressing the headset answer button. If I answer by sliding the on-screen bar over the green "answer" button, the speaker in the phone itself comes on instead.
Is there a way to change this behavior such that the sound always comes through the headset if it is connected to the device, even if I answer on the phone itself?
I would be interested in this too, as I have a bluetooth car kit, if I accept the call from the car screen it is ok, if I accept it on the phone it routes through the phone.
I'm having a similar issue, but a little more complex it sounds like... When the phone rings and using my bluetooth headset (Jawbone2), I have to:
Press the answer button on the Jawbone2
Ringtone sound now comes through the headset
Remove phone from pocket and Slide2Answer with S2U2
Call is now connected through bluetooth
With my Kaiser, all I had to do was press the bluetooth answer button and the call would automatically pick up. No removing the phone, no pressing buttons or sliding to answer!
If I Slide2Answer on the phone when ringing without "transferring the call to bluetooth" first, the handset picks up the call. Useful in many cases, especially if I can't find the bluetooth after putting it down or in my jacket pocket for the time being. If I use the phone to make a call from the handset with bluetooth connected, it always transfers the sound directly to bluetooth. The problem lies with answering the phone with a bluetooth headset - the 4 steps above need to be completed instead of just #1 like it should be!
if you don't want it to go to the phone you need to answer with the device you want to talk with. thats how bluetooth on phones work, tp and tp2
You stole Boo Boo's Name said:
if you don't want it to go to the phone you need to answer with the device you want to talk with. thats how bluetooth on phones work, tp and tp2
Click to expand...
Click to collapse
I get that, If I try to answer the phone on the headset though, just the sound of the ringtone comes through the headset - the phone is still not answered, and is still ringing, just now in my ear! I STILL have to actually answer it via the phone's controls, which is pretty hard to do if you have your hands full........
For the OP Boo boo is correct. Answer the call on the device you want to use.
For Garcia25 the problem is S2U2. I ended up removing it and going back to the built in lock + LockDevice + built-in slide-to-answer.
S
I have a problem with handsfree bluetooth (jawbone prime).
When I make an outgoing call, everthing works fine. But when i have an incoming call, it sometime doesn't change to handsfree mode automatically, I have to turn it on manually.
Are there any solution, please help me
Hi,
If you answer the call with the phone buttons, it's redirected to the phone, not to the BT headset. If you answer the call with the BT button, it should be always redirected to the headset.
Radu
Hi,
Is there any way to make the speakerphone work while connecting? Once the call connects it works great, but for example if I'm driving, I want to press call, hit speaker and go and know it's ringing, instead of waiting for it to connect before the speaker initiates.
The phone rings both the headset and the evo.
When anwering the call with the evo the call is not transfered to BT. Answering the call via the headset works correctly.
Voice dialing doesn't work through the headset. The Evo seems to turn on the speakerphone instead of listening to the headset.
Any ideas? Should I get an Iphone instead? (kidding)
it is supposed to answer at the headset if you use the headset to answer the call so if your bluetooth is not within reach you can still answer the call. Are you initiating voice dial thru the headset with a long press...Ihave the Pro and it works fine with my EVO
same here, if i answer on the headset it goes straight to headset, if i answer on phone it goes to phone until i press the call button and it transfers over
mccarthyand said:
it is supposed to answer at the headset if you use the headset to answer the call so if your bluetooth is not within reach you can still answer the call. Are you initiating voice dial thru the headset with a long press...Ihave the Pro and it works fine with my EVO
Click to expand...
Click to collapse
Yes long press.
Are your sure that Evo is hearing you via the headset?
I'd like to long press and then say "call home", which works if I'm close enough to the phone. If its on the dashboard I almost have to SCREAM.
tinfox said:
The phone rings both the headset and the evo.
When anwering the call with the evo the call is not transfered to BT. Answering the call via the headset works correctly.
Voice dialing doesn't work through the headset. The Evo seems to turn on the speakerphone instead of listening to the headset.
Any ideas? Should I get an Iphone instead? (kidding)
Click to expand...
Click to collapse
thats exactly how ALL BT headsets work, or are supposed to..
As far as voice dialing, it sounds like operator error, as I have the same headset, and it works perfectly for me all the time..
wase4711 said:
thats exactly how ALL BT headsets work, or are supposed to..
As far as voice dialing, it sounds like operator error, as I have the same headset, and it works perfectly for me all the time..
Click to expand...
Click to collapse
As far as operator error what could I possibly be missing? Its pretty straight forward.
Also I have the bug where in I speak to Vlingo and then turn off BT, EVO reboots.