Related
hi every body
yesterday i was checking out program ROM MANAGER and i found option install rom . so i did it but after phone restarting . at it stucked at frist black screen and there is no any response or move ... then i entered into AMOR_na recovery to reinstall another rom ... i surrprise that i cann't mount SD card ... and now i can't plug my desire to pc to install anoher rom and and my cell phone cann't see my memory card ... please help what can i do ... urgent
thanks for all
odda said:
hi every body
yesterday i was checking out program ROM MANAGER and i found option install rom . so i did it but after phone restarting . at it stucked at frist black screen and there is no any response or move ... then i entered into AMOR_na recovery to reinstall another rom ... i surrprise that i cann't mount SD card ... and now i can't plug my desire to pc to install anoher rom and and my cell phone cann't see my memory card ... please help what can i do ... urgent
thanks for all
Click to expand...
Click to collapse
Enable the SD Card functionality: Boot your phone in FASTBOOT mode (back + power), and enter this command: 'fastboot oem enableqxdm 0' . This will re-enable your SD card.
thank you for reply
but sory for asking how to enter this command from phone or form pc ... and which tool to do that from pc .... i am just beginner
thank you once again
thank you so much ... it is done and solved ..... mant thanks
Please how did you do that? I have the same problem.thanks
You must've Android sdk installed. In and from the tools folder of your sdk open cmd prompt and enter the command as long as you have booted your phone in fastboot by shutting it down and the turn it on by pressing back button + power on
Sent from my Desire HD using XDA App
thank you for helping us
but i have another problem in my HTC desire
i found after installation rom that the (bluetooth )not workig and (usb debubbing ) not working too ( just for charge only no more action )
now my moblie all thing working normaly and i have root ( AMON_RA ) and working too and i can see my memory card but NO BLUETOOTH NO USB
i try to change radio but it is not working and i tried to change rom but it is not working too ... kinldy do u have any soulution .....
thank you so much in advance
does it take long for the charge to start? usb mass storage doesn't work? i think you have usb brick. have a look here. read http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
thank you i will feed you back soon
and please what about Bluetooth
after you try it, let me know. about flashing a radio!? are you s-off. i need to know about rom and radio you have flashed recently.
odda said:
thank you i will feed you back soon
and please what about Bluetooth
Click to expand...
Click to collapse
find my moblie infomation
bravo pvt3 ship s-on
hboot -0.93.0001
microp-051d
touch panel-synt0101
radio-5.11.05.14
my radio 32.49.00.32u_5.11.05.27
kernel 2.6.32.15-gd96f2c0 [email protected]#1
software number w1002 2.2 arabic
this rom installed from ce4arab.com
thank you once again in advance
You should try downgrading to a different radio version first and if the issue still persists, then try flashing a different ROM as your current ROM may have an issue with Bluetooth, which could also explain why it is not functioning for you.
i am downgrading my radio to 32.46.00.32U_5.10.05.17_2 and as the same bluetooth not working and i USB debugging not working too .... and i notice that USB tethering i can't check the box ....
you have to know something i was sufring from could't see my memory card . and i solve it by installing ABD KIt ...
and i notice too it s take long time to start charge ... and if i plug my phone to PC it always searching for Qualcomm CDMA Technologies MSM ?
any advice ?
thank you for support me
odda said:
i am downgrading my radio to 32.46.00.32U_5.10.05.17_2 and as the same bluetooth not working and i USB debugging not working too .... and i notice that USB tethering i can't check the box ....
you have to know something i was sufring from could't see my memory card . and i solve it by installing ABD KIt ...
and i notice too it s take long time to start charge ... and if i plug my phone to PC it always searching for Qualcomm CDMA Technologies MSM ?
any advice ?
thank you for support me
Click to expand...
Click to collapse
I think you may have a driver issue. Disconnect your phone, completely un-install HTC Sync and its associated drivers, restart your PC, re-install HTC Sync, reboot your phone, ensure the 'USB Debugging' option is selected via the phone, and then connect it to your PC after it restarts.
If you have the same bluetooth error, even after changing radio versions, then I would advise you to try either a different working custom ROM that is stable, or even revert back to stock ROM by running your original RUU (use a Gold Card also if necessary), and then check if your Bluetooth is functional. If it is, re-root and install the working custom ROM of your choice.
You have Ian brick. Follow the link I gave you a few posts ago.
Sent from my Desire HD using XDA App
i have one ques.
if i have backuped my last normal rom i was have by rom manager ... and i have it
can i restore it by rom manager and fix all error i have ... ?
i am using AMON_RA recovery
because i am afraid from loseing my cell phone
odda said:
i have one ques.
if i have backuped my last normal rom i was have by rom manager ... and i have it
can i restore it by rom manager and fix all error i have ... ?
i am using AMON_RA recovery
because i am afraid from loseing my cell phone
Click to expand...
Click to collapse
Restoring a Nand will not work. There are different drivers on the PC host, and different firmware controlling USB on the phone. Try the unbricking guide in post#8 and also try what I suggested above.
Let us know how you get on.
thanks for every one helpme in this issue
but i would like to tell you all problems solved by USB-Brick soulution
as you told me before ... i create image from ( r3-tinycore_2.10-desireroot ) on CD and boot my lap from CDrom .. and then do some steps to git CID ... and then i modefied img files and restore ot to my phone and restart and all thing go's well ...
for more details about that i am ready ...
thank you once again
odda said:
thanks for every one helpme in this issue
but i would like to tell you all problems solved by USB-Brick soulution
as you told me before ... i create image from ( r3-tinycore_2.10-desireroot ) on CD and boot my lap from CDrom .. and then do some steps to git CID ... and then i modefied img files and restore ot to my phone and restart and all thing go's well ...
for more details about that i am ready ...
thank you once again
Click to expand...
Click to collapse
Great news, glad you have a properly functional device now
How you did it
odda said:
thanks for every one helpme in this issue
but i would like to tell you all problems solved by USB-Brick soulution
as you told me before ... i create image from ( r3-tinycore_2.10-desireroot ) on CD and boot my lap from CDrom .. and then do some steps to git CID ... and then i modefied img files and restore ot to my phone and restart and all thing go's well ...
for more details about that i am ready ...
thank you once again
Click to expand...
Click to collapse
Please see my problem here:-
http://forum.xda-developers.com/showthread.php?t=923282
It's similar to you. Please guide me to resolve.
Thanks.
Hi had all different roms on my DHD and settled on Ice cold sandwich which it has been running for a few months now, earlier on today I noticed that it had gone off and only the backlight was on, So I restarted it and it started loading the screen up but then just went into a loop.
So i pulled the battery and went into recovery and reloaded the ICS rom, but know it just vibrates 5 times and shows the splash screen and goes off with just the backlight on again.
I can get into fastboot but when i press the button for recovery it does the same I've tried every pd98img I could find and it says wrong image after I try and load them.
And when I connect it to the pc it can't be recognised by htcsync or thru any adb commands, and windows tried to load a driver called Q_USB-DLOAD or something similar then loads a qualcom usb driver but adb commands still won't recognise it, been looking all bnight for an answer getting desperate.
Thanx in advance Michael
Put it in fast boot and plug into PC. Run your stock ruu from PC. It will install the stock ROM. Then when you can get into ROM enable USB debugging and use aahk option menu to install recovery. You should be able to enter recovery and wipe everything except SD and install whatever ROM.
Sent from my Inspire 4G using xda premium
Hi mabye if You Are using apex launger. After det update i cant
Use apex
- Download this RUU
- Boot into Hboot.
- Relock your bootloader (option in hboot)
- go into fastboot
- Connect your DHD to your PC via USB
- Run as administrator the RUU you downloaded
Follow instructions and you will be restored to stock
still no luck
Gizmoe said:
Put it in fast boot and plug into PC. Run your stock ruu from PC. It will install the stock ROM. Then when you can get into ROM enable USB debugging and use aahk option menu to install recovery. You should be able to enter recovery and wipe everything except SD and install whatever ROM.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
I put it into fastboot and connected it to the pc, It try's but fails to load the driver Android 1.0. I've reinstalled htc sync reinstalled android sdk got the google usb driver but it won't install any drive,r the stock ruu says no device connected. wonder if chucking it off the wall will help
xbiggyl said:
- Download this RUU (mirror)
- Boot into Hboot.
- Relock your bootloader (option in hboot)
- go into fastboot
- Connect your DHD to your PC via USB
- Run as administrator the RUU you downloaded
Follow instructions and you will be restored to stock
Click to expand...
Click to collapse
Hi, thanks for the reply the link for that ruu is dead,and i can't get the device recognised in windows to run anything tried every driver going,
If anyone can point me in the direction of the right pd98.img I will try to load that again the one i found had the modelid: PD9812000 where as my device says modelid: PD9810000 so thats prob be the reason that it said wrong image and wouldn't load it.
Thanks.Michael
Ruu will run with boot loader in any state so no need to re lock it. It seems a peice of hardware failure is the issue here. Try removing SD card and see if it will enter recovery. If not it may just have died.
Sent from my Inspire 4G using xda premium
Gizmoe said:
Ruu will run with boot loader in any state so no need to re lock it. It seems a peice of hardware failure is the issue here. Try removing SD card and see if it will enter recovery. If not it may just have died.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Correct me if I'm wrong but I believe if you are S-ON you need a locked bootloader in order to flash a stock RUU.
(read section 3 here)
---------- Post added at 11:46 PM ---------- Previous post was at 11:44 PM ----------
mackemsrule said:
I put it into fastboot and connected it to the pc, It try's but fails to load the driver Android 1.0. I've reinstalled htc sync reinstalled android sdk got the google usb driver but it won't install any drive,r the stock ruu says no device connected. wonder if chucking it off the wall will help
Click to expand...
Click to collapse
First try a different usb cable.
If that doesn't work try a different PC (Install htc sync)
Your drivers may be messed up somehow.
Here's a working link for the RUU : Link
If you tried all the above and still can't connect to PC, try this:
-Relock Bootloader
-Download the above RUU.
-Run the EXE in windows (as administrator).
-Tick the "I agree box" and click next (just once). Don't continue with any steps.
-Go the temp folder on your PC (you can find it by navigating to: C:\Users\[your username]\AppData\Local\Temp )
-search for ROM.ZIP
-Copy it to your desktop. Rename it to PD98IMG.zip and place it in the index of your sdcard (format your card first using fat32. Don't quick format)
-Place your card back into your phone and reboot into bootloader.
-Let it flash automatically.
No makes no difference with sd card removed just shows splash screen vibrates pauses then vibrates 7 times and goes blank
Check the my post above. I've just edited it.
I use to think you had to be s on too to flash an ruu but it makes no difference. I have flashed them both s on and s off. Attn1 has tried to clear this up, but is a common misconception.
Sent from my Inspire 4G using xda premium
xbiggyl said:
Correct me if I'm wrong but I believe if you are S-ON you need a locked bootloader in order to flash a stock RUU.
(read section 3 here)
---------- Post added at 11:46 PM ---------- Previous post was at 11:44 PM ----------
First try a different usb cable.
If that doesn't work try a different PC (Install htc sync)
Your drivers may be messed up somehow.
Here's a working link for the RUU : Link
If you tried all the above and still can't connect to PC, try this:
-Relock Bootloader
-Download the above RUU.
-Run the EXE in windows (as administrator).
-Tick the "I agree box" and click next (just once). Don't continue with any steps.
-Go the temp folder on your PC (you can find it by navigating to: C:\Users\[your username]\AppData\Local\Temp )
-search for ROM.ZIP
-Copy it to your desktop. Rename it to PD98IMG.zip and place it in the index of your sdcard (format your card first using fat32. Don't quick format)
-Place your card back into your phone and reboot into bootloader.
-Let it flash automatically.
Click to expand...
Click to collapse
Well I've tried with my laptop and pc both running win 7 x64. If i plug it in turned off they try to load QHUSB_DLOAD and qualcomm HS-USB QDLOADER9008,And fail
If i plug it in with hboot on it try's to load Android 1.0 drivers, in device manager it shows under other devices but in properties says the drivers are not installed, so if I click update drivers and direct it to any other ones it says windows could not find driver software, so any program i run from my pc can't connect to it,so I'll try your suggestion above I'm d/l the ruu now and willl et you know how i get on,
Thanks for everyones help
mackemsrule said:
Well I've tried with my laptop and pc both running win 7 x64. If i plug it in turned off they try to load QHUSB_DLOAD and qualcomm HS-USB QDLOADER9008,And fail
If i plug it in with hboot on it try's to load Android 1.0 drivers, in device manager it shows under other devices but in properties says the drivers are not installed, so if I click update drivers and direct it to any other ones it says windows could not find driver software, so any program i run from my pc can't connect to it,so I'll try your suggestion above I'm d/l the ruu now and willl et you know how i get on,
Thanks for everyones help
Click to expand...
Click to collapse
Clicking :good: Thanks is more than enough
I hope it doesn't turn out to be a hardware issue, and that the method above works out for you.
Let us know how it goes!
still no luck
well I followed the instructions and renamed rom.zip to PD98IMG, fast boot ran it and was successful but on reboot it just vibrates 7 times again and sticks on the splash screen, so looks like I'll have to take it into a repair shop down the town, see if they have any luck.
Thanks for everyones time and advice.Michael
mackemsrule said:
well I followed the instructions and renamed rom.zip to PD98IMG, fast boot ran it and was successful but on reboot it just vibrates 7 times again and sticks on the splash screen, so looks like I'll have to take it into a repair shop down the town, see if they have any luck.
Thanks for everyones time and advice.Michael
Click to expand...
Click to collapse
Michael,
If you haven't sent your phone yet, try flashing CWM recovery using this guide..
Then reflash the PD98IMG you created in the previous instructions.
I'm not sure if this will work 100%, but there's no harm in trying!
xbiggyl said:
Michael,
If you haven't sent your phone yet, try flashing CWM recovery using this guide..
Then reflash the PD98IMG you created in the previous instructions.
I'm not sure if this will work 100%, but there's no harm in trying!
Click to expand...
Click to collapse
the links in that guide for the downloads are dead, don't think it would have worked anyway as it was using the adb commands, they won't recognise my phone.
Thanks anyway
mackemsrule said:
the links in that guide for the downloads are dead, don't think it would have worked anyway as it was using the adb commands, they won't recognise my phone.
Thanks anyway
Click to expand...
Click to collapse
I think there is a way to flash CWM from SDCard using update.zip but I can't seem to find it anywhere
If you can do it, try that.
Also I have read here that some folks are experiencing the same 7 vibrations. But they haven't found a solution yet. Maybe you can follow that thread and hope someone will come up with something.
Sorry buddy for not being able to help. Good luck :fingers-crossed:
Well thanks again for your help, took it into a local repair shop and he said it was a hardware failure
mackemsrule said:
Well thanks again for your help, took it into a local repair shop and he said it was a hardware failure
Click to expand...
Click to collapse
Was it the board? I searched around for the 7 vibrations and many have said it was a faulty motherboard.
I hop you will get it back soon...
Hard luck mate :/
They didn't say what was the fault just that it was hardware related, Only charged me £15 for having a look at it,
Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps
wattamega said:
Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps
Click to expand...
Click to collapse
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)
no usb comms when in command prompt / adb
eventcom said:
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)
Click to expand...
Click to collapse
--------------------
Thanks eventcom, but I've followed that link and numrerous others and they all follow the same theme.
here is the problem as I see it...
1/I have installed the android driver when in hboot and it works ok as per attatched image
2/ I have installed htc_sync_setup 3.2.20.exe which is the latest driver availiable from the htc website.I then uninstall HTC sync, which leaves HTC driver installer & HTC BMP USB driver remaining as installed ( as per instructions)
3/ I have uninstalled any other USB programs which might conflict including Itunes and ascociated garbage (no i didn't put it there my kids did!).
USB debugging is turned on & when i plug in USB i go charge only (as per instructions)
Here's a hint...
When I execute an adb commandwithin command prompt eg [adb devices] i get no devices. When I issue a adb copy command I get the result "device not found" I'm know i'm going nowhere on this until I can get device to properly talk via adb and this is the assistance that i am seeking
further info.
I've tried this procedure on another (winxp) machine with same results.
Ive tried this procedure on another wildfire "s" (that is already rooted) same results
I've temporarily disabled the AVG 2012 virus protection & firewall.
As well as being in the directory that the file adb.exe exists I have also installed SDK so adb appears to run in any directory (please explain ?)
If i plug in usb and go "mount sd card" I can access the sd card on the phone viawindows explorer . in my mind this tells me that I have correct usb driver working.
I've tried a different usb cable AND a different phone
before I uninstalled htc sync i tried it out. it doesn't work and the phone won't sync up to this program ( it rarely works this program, tried it on numerous pc with different htc devices and more often than not it doesn't work)
I'm hoping that someone who is experienced in adb can help me get the phone talking with my pc, keeping in mind that I've done almost everything that I can think of to get my phone to "talk: via usb cable and issue commands. If I can't get my phone to communicate via adb then there is no way I can get past step one
please help me
wattamega said:
--------------------
please help me
Click to expand...
Click to collapse
i shall do my very best
ok so what system are you currently running? (win7,vista,xp ect)
are you using the stock usb cable that came with the phone?
when you connect the device to the pc with usb debugging turned on do you get the usb debugging notification in your status bar on the phone?
when you plug your device into the pc with debugging enabled what does your device manager recognize it as? mine shows up as attached...
did your antivirus flag up when you were installing the skd or downloading the adb.exe?
Success with debranding but problems with Revolutionary recovery
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...
wattamega said:
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...
Click to expand...
Click to collapse
That's ok , power is meant to do that, its the back button you need to use the trackball to select stuff also if I remember correctly that recovery has an issue where it will not charge the phone when it is turned off, so I would update that asap I shall give you a link when I'm out of bed, but for the mean time, backup, wipe everything and install cm7+ gapps
ok here is the most up tp date cwm recovery for the buzz as far as i know. and here is the thread it came from something to note, when you jump up tp gingerbread the type of recovery changes as well, so, the new one will not flash sense roms unless the rom has been designed for the new edify type recovery. not sure how many support this though. also the new recovery will NOT flash radios. it does not play well with others but you can always downgrade your recovery temporarily if you need to, or use the rom manager app (which ic an app interface for the recovery) to flash what you need
Sent from my HTC Sensation using xda premium
Success at last
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.
wattamega said:
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.
Click to expand...
Click to collapse
no problem man glad your all kitted out!
wow that cheap this phone cost me £140 when i bought it!!! ( a few years ago) man i got ripped off.... still glad to hear you got sorted out you should always read everything you can carefully before you go flashing your phones
also, just so you know, this wildfire is code named BUZZ and your wildfire s is code named MARVEL just to avoid confusion of course if you need any help with the marvel just let me know. i imagine you've been over to the marvel forum ect but if you get lost pm me. i have experience with that phone as well aside from the name they are completely different, and the marvel does not have s-off yet :/ not by software anyway so everything is different to do :/ still i am rambling now glad your sorted mate :good:
good afternoon friends my htc one x not recognized on any pc connected the USB cable and just starts charging the battery and I made a mistake and now WIPI mobile system is to the home screen (HTC quietly brilliant) that I do I'm desperate I would appreciate if you help me a lifetime. to excuse my English
We need some more info.
Did you unlock bootloader at htcdev?
Did you install cwm recovery?
TToivanen said:
We need some more info.
Did you unlock bootloader at htcdev?
Did you install cwm recovery?
Click to expand...
Click to collapse
4.1.2 aokp if I come from I suddenly stopped working I have installed v2.1.7 TEAM WIN RECOVERY PROJECT
Can you access recovery or bootloader screen? (hold volumedown + power)
Sent from my HTC One X
TToivanen said:
Can you access recovery or bootloader screen? (hold volumedown + power)
Sent from my HTC One X
Click to expand...
Click to collapse
if I can and I can also access the recovery but when you connect the phone to the pc does not recognize usb fastboot
Latest drivers installed? Phone in fastboot mode? (should say fastboot usb)
TToivanen said:
Latest drivers installed? Phone in fastboot mode? (should say fastboot usb)
Click to expand...
Click to collapse
it matters that the USB cable is not the original phone? I have installed the new drivers on the pc but the pc does not flinch when I connect the phone. load only
Does
Code:
fastboot devices
return anything?
Drivers installed?
TToivanen said:
Does
Code:
fastboot devices
return anything?
Click to expand...
Click to collapse
I do not understand the problem is that the pc does not recognize the phone and therefore does not give me the usb fastboot think
elwilliam said:
I do not understand
Click to expand...
Click to collapse
Write fastboot devices to fastboot command prompt. Do you even know what fastboot is?
TToivanen said:
Write fastboot devices to fastboot command prompt. Do you even know what fastboot is?
Click to expand...
Click to collapse
if it is placed fastboot folder in local disk c fasboot inside the folder with cmd Habro connected mobile device fastbott put me appear a series of commands but which is not to give
htc one x not found on pc when connected via usb
elwilliam said:
if it is placed fastboot folder in local disk c fasboot inside the folder with cmd Habro connected mobile device fastbott put me appear a series of commands but which is not to give
Click to expand...
Click to collapse
Hi, I have the same problem as you. I treid root my one x and now, it has clockworkmod on it, but no back up, no stock rom and no rom on the phones hd. I can confirm that in command prompt the device is found, but the phone is not visible on my computer/usb wise for me to put a rom/files onto the phone so I could get a rom on it and make it work again. Right now my phone is just an expensive brick. I tried doing the recovery option but says failed due to low power, the dman thing was plugged in all day and would not even turn on at first. Can anyone help me? Thanks and sorry for adding to your original thread/problem post.
Cheers
Ate you charging using USB connected to your computer or outlet? Try outlet.
Sent from my One X using xda app-developers app
If you have clockworkmod older than 5.8.4.0, you should update it. Then you can charge from recovery and mount the drive as USB to copy ROMs on.
Just know that cheap USB cables, although looking solid may not be good enough to transfer data. THe phone detects this and defaults to a non-data enabled mode. Get a different USB cable and try again.
after updating my phone and rebooting it am stuck on the boot animation, the weird thing is that I cant access the recovery menu, because my volume buttons are broken and cant be repaired. :crying::crying:
I tried sitting up the sdk and try ADB. but its giving an unauthorized devices message after I type in the adb devices command I have been looking and trying to solve this problem for 4 days now and I was wondering if someone could help me here???
little info might help :
Galaxy nexus GT-I9250
I attached a pic
Thank you in advance
SVT5533 said:
after updating my phone and rebooting it am stuck on the boot animation, the weird thing is that I cant access the recovery menu, because my volume buttons are broken and cant be repaired. :crying::crying:
I tried sitting up the sdk and try ADB. but its giving an unauthorized devices message after I type in the adb devices command I have been looking and trying to solve this problem for 4 days now and I was wondering if someone could help me here???
little info might help :
Galaxy nexus GT-I9250
I attached a pic
Thank you in advance
Click to expand...
Click to collapse
install latest adb file version 1.0.31
samersh72 said:
install latest adb file version 1.0.31
Click to expand...
Click to collapse
This helped me out a ton when I couldn't recover from trying to flash back to the CM 10.2 8/18 nightly.
Can you explain with a little bit more details?
ok updated my adb, and platform tools and also installed google usb drivers, but now am getting the the device is offline after typing in adb devices
any help ?????
Hardware buttons which can't be repaired? That's a first.
Ya the guy who took a look at it said the motherboard is damaged where the buttons should be welded and needs a new mother board