het there,
I need help with my HTC ONE X and dont know what to do please help me
my one x is stuck in the boot logo " htc quietly brilliant" screen and not responding to go to the OS 4.0.4
when i connect it i hear the sound of the usb connect but cant see it on "my computer"
i tryed to do fastboot but fail*
i tryed to do recovery reset modeand and it transfer me to the clockwo r kMod Recovery but in the "install zip from sdcard" there is no files it
looks like the phone as been format and there is nothing on him:crying:
what can i do ? please i need youe help:fingers-crossed:
how can i install a new OS on my phone again ?
p.s - when the phone is conected to the reset mode its say "fail to open usb master mode"
tnx alot:good:
If you can get into recovery, it can still work. If you already have the ROM you want downloaded on your PC, just connect the phone to a USB cable. Boot into CWM and go into Advanced, Mounts and Storage, Mount USB/SD (I forgot the specific wording). The phone storage would then pop up on your PC like a regular thumbdrive and you can transfer the ROM file through that and install it from there
TNX Man !!!! its working !!!!
Related
I've installed some ROMs before. Today's one, stucked at 20%, only possibility was to reset device. And - there is problem, after reseting I've chosen (by mistake) option by which phone memory should be erased. So now I got clean Internal memory, and no diamimg.nbh on it, so I don't know how to bring diamond to life.
Any help?
jusr make a reset with vol down pressed to enter bootloader mode, connect to computer and flash any rom with diamondcustomruu+.nbh file of the rom
Will diamondcustomruu see my phone if it can be started only in BootLoader mode? I'm connecting my phone in this mode to PC, however customRRU doesen't see it (windows does - it's recognized as qualcomm) .
EDIT: As for now, only possibility i see is connecting phone to USB host : http://wmpoweruser.com/?p=490 . Any other ideas?
EDIT2: OK. I've unchecked USB connection in ActiveSync to connect mtty. Flashing right now.
EDIT3: It did work. Diamond is alive. Problem SOLVED.
Hi all u guys out there hope someone can help me i installed this rom on my diamond the name was TEAL or some like that the first few times it was fine but then my battery was running low and then when i turned my diamond on again i had 2 setup mobile and now it just keep showing the screen that says it wanna setup and i cant acess USB from there so plz if u can help me recover my diamond plz reply
try update from Boot Screen
Blackster..try updatin frm boot screen..go in boot screen & then connect it to usb & try updatin the ROM...
to get in your bootscreen just reset your device while holding the volume down button
just so you know ^^
Tried every thing
,My vista wont show the usb from hardSPL and i cant connect from the setup and when i just installed the rom again it wont work
nothings work plz help
USB??
its just installing the usb driver but show no usb
simple thing
just run RUU from u'r PC...
Follow 1st Two steps by clicking next...
no need to perform mentioned task in RUU.
Connect USB Cable PC to Diamond...
On diamond hold on off button and volume down button and hit reset button on back..
you will forwarded to boot screen on diamond...
It will automaticly identify u'r USB connection to PC...
Once it displays USB on diamond boot menu, Hit Update button on RUU running on PC...
Then follow the RUU instructions...
Once finished, you have done...
hi good day..
i was trying to update my rom to opendesire 3.1.1.. so i connected my usb cable and flashed it. but while wiping i had an error. it said cant open /cache/recovery/command. i just ignored it and then while i was trying to flash, my connection from my pc to the phone just got disconnected. so i restarted my phone and tried to flash again. but when i tried to run the recovery-windows.bat file, it just wont start.. i hope you could help me asap! thanks
another thing.. when i plug my phone to the pc it automatically lights up and it gets stuck on the htc logo..
help please.. thanks
ryanpaul said:
hi good day..
i was trying to update my rom to opendesire 3.1.1.. so i connected my usb cable and flashed it. but while wiping i had an error. it said cant open /cache/recovery/command. i just ignored it and then while i was trying to flash, my connection from my pc to the phone just got disconnected. so i restarted my phone and tried to flash again. but when i tried to run the recovery-windows.bat file, it just wont start.. i hope you could help me asap! thanks
Click to expand...
Click to collapse
hi, dont worry about that, I had it too now that you are trying to flash a ROM onto the phone, I am guessing that you are rooted.. to load a ROM you need a ClockworkMod. if you can still get onto your phone (call people and actually use the phone), get ROM Manager, you should see Install clockworkmod, or something like that, just let it download it and instll (don't interrupt!) and try going into recovery (vol down +power button, recover, then you should be able to use your track ball to navigate and install from SD, that worked for me )
pm me if you need further help
uhmmm.. i cant use the phone its stuck on the htc logo.. did i brick it? i tried to go to my cmd prompt ant tried to type in adb devices. it looked like this.
List Of adb Devices
it just blank i cant see my phone.. is it bricked?
UPDATE!!
1.i tried to root the device again but at step 2 i got stuck because the device wasnt found.
2. i thought it was usb bricked so i went to a page here in xda developers "[DEV] USB-BRICK FIX - Restore USB function on your bricked Desire". while i was getting my cid. it suddenly booted (i didnt do anything but set it into fastboot and typed 'fastboot oem boot') and it ran the stock 2.1 rom. so i tried rebooting into recovery but to no avail.. it still cant detect the device when i run the recovery-windows.bat
any ideas?
<<.>>Asus Zenphone 2 z008 stuck after hard reset cannot open!>> I am out of options
Dear all kind developers ,
I went to the recovery mode of my asus zenpone 2 and wipe of the data from it.
After I clicked data wipe it did not continued , it was stuck for like 20 minutes and I restarted the phone .
After that every time I try to open it or go to recovery I cannot open the phone. It only shows an android logo and an error.
I can go to the boot loader menu .
I have already searched the whole internet and found I solution for it , which I have to
* Download intel driver, and some abd files
* Enable Usb debugging and switch of the phone
* Go to boot loader and switch volume up until it shows fastboot
* Connect the phone via usb and open the adb files in cmd
* Type fast boot remove cache in the cmd
And it says that the phone will be alright after the process !
BUT, I DID NOT KEEP THE USB DEBUGGING TOOL ON ALL THIS TIME !
Can anybody help me with a solution to this ! Please
When you have that error logo, press your volume button and then power button and release it immediately. I think thats how you get into recovery mode/bootloader menu. If this doesn't work, try its vice versa because its been a long time since I've gone ito recovery mode/bootloader menu.
rooter789 said:
Dear all kind developers ,
I went to the recovery mode of my asus zenpone 2 and wipe of the data from it.
After I clicked data wipe it did not continued , it was stuck for like 20 minutes and I restarted the phone .
After that every time I try to open it or go to recovery I cannot open the phone. It only shows an android logo and an error.
I can go to the boot loader menu .
I have already searched the whole internet and found I solution for it , which I have to
* Download intel driver, and some abd files
* Enable Usb debugging and switch of the phone
* Go to boot loader and switch volume up until it shows fastboot
* Connect the phone via usb and open the adb files in cmd
* Type fast boot remove cache in the cmd
And it says that the phone will be alright after the process !
BUT, I DID NOT KEEP THE USB DEBUGGING TOOL ON ALL THIS TIME !
Can anybody help me with a solution to this ! Please
Click to expand...
Click to collapse
When you get to the Android with "ERROR" underneath, hold power and press volume up. It should go to recovery. Try clearing cache again from recovery.
If that doesn't work, go and get the latest version of the rom from the ASUS site, put it on a FaAT32 formatted sd card (rename to MOFD_SUPDATE) and put in phone. Go to recovery and flash rom from sd card.
Otherwise use fastboot and download an image, pre-rooted images available in Original Android Developement, thankyou Shakalaka, and flash from fastboot with command "fastboot flash system system.img" (make sure you put the system.img file in the same directory so you don't have to go hunting).
Solution found !
I've found a solution for this problem
All you need to find is a same device which is normal or BUY a new one ! OR BEG,Borrow, or steal from a friend
Find a asus zenfone 2 from a friend and enable usb debugging
Download intel driver
Just google it
Download Abd driver installer from the link bellow
Just google it
Just enable the usb debugging mode from the phone which you found
Open the adb driver intaller and fetch the abd driver directly from the installer for your asus phone
After that, download the following adb interface
Google it like " Abd interface for asus fastboot"
Then, extract the file , hold shift and right click the folder you will see a option in cmd option
Click that and a cmd window will be opened
Turn off your phone
Hold volume up and power button
After the phone vibrates realease from power button and keep holding volume up button
Boot loader will open and press volume up until you see "continue in fastboot mode"
Keep it the mode and connect your device to pc
It will directly intstall usb driver and adb driver after that
Just go back to your pc and type "fastboot format cache" and the process will continue
You will know when the process is over from the cmd in your pc
After that reboot your phone and you will still see the error
Click power and volume up button and the recovery mode will apear
Just wipe your data and every thing is going to be ALRIGHT
hi everyone . i can't root my P8000 in noway and can't install any custom recovery
1.install supersu and when open it say "there is no SU binary installed, and supersu cannot install it . this is a problem'' then i turn on OEM unlocking and try it again but i face with same error
2.i decide to flash a recovery and install zip supersu file from that but i faild again because another unslovely problem , i open sp falshtool, load scatter file , click on download bottum , turn off the phone , when i connect usb cable , the device does not appear in the device manager interface '' a sound plays to say it is connected and then another sound to say it has disconnected plays straight away and I can do nothing '' i manually install mediatek drivers & preloader but still not working
can anyone help me please? thank you
my pc windows is 7
am change usb cables and computers but mobile not working in pc plz gelp me and thank you
hi,
1. turn off device
2. run flashtool, select scatter and press download button
3. connect device to pc via usb, it turned on and begin charging
4. press the power button on the device for 5-10 sec, it turned off and flash tool began flash it