I will be probably getting this phone in the near future so has anybody gotten a sleeve that fits this phone? Or perhaps a mofi pouch? Some ideas would be great.
Related
Hi guys,
Really need some help. I'm looking for a silicon case, e.g:
http://www.boxwave.com/products/flexiskin/flexiskin-i-mate-jasjar_723_270.htm
However, I need to have a belt clip for my HTC Universal, as it is simply too big for my pockets. There are 2 possibilites I can think of:
1) Buy a Silicone case that comes with a Belt Clip attachment. I've yet to see this. Would appreciate if anyone has seen this and know where to buy.
2) Buy a plain Silicone case and attach it to a normal Universal Leather case. Currently I'm eyeing the PDAir Metal Case or the Krusell Multidapt Leather case.
I'm in favour of option 2. So those experienced PPC/PDA users out there, is it possible to squeeze in a "silicone-cased" HTC Universal into either the PDAir Metal Case or Krusell Multidapt Leather case?
Based from what I've experienced, you cannot squeeze the 'silicone-cased' universal inside the metal or leather case.
I have silicone case for sale on eBay, please search my username, chaiwat_t. It's the thinnest case to protect your Universal. Anyway, it can't be used like what you want as I mentioned above.
Hi
I purchased a silicone case off ebay and also got a pouch from proporta ...
http://www.proporta.com/F02/PPF02P05.php?t_id=1354&t_mode=des
the universal sits well inside the pouch with the silicone case on. It is a tighter fit but I've had no problems so far. Also no drag on the SD card slot in the pouch either.
The pouch looked like a good approach since I didn't want one of the more intrusive cases. Had krusell for my M2000 and it made the keyboard loose. Been paranoid ever since.
Hi
I purchased a silicone case off ebay and also got a pouch from proporta ...
http://www.proporta.com/F02/PPF02P05.php?t_id=1354&t_mode=des
the universal sits well inside the pouch with the silicone case on. It is a tighter fit but I've had no problems so far. Also no drag on the SD card slot in the pouch either.
The pouch looked like a good approach since I didn't want one of the more intrusive cases. Had krusell for my M2000 and it made the keyboard loose. Been paranoid ever since.
I need some help finding the perfect case.
I want a case that is tight fitting not loose. I'm looking for a case that comes off easily so I can swap batteries and charge with my dock. I want it to be a full case not just the snap on ones that just cover the back. I dont want a strictly silicone case since they dont slide out of a leather holster easily and they are loose.
What I have tried.
1) Seidio Active- It was easy to take off but it discolors way to easily and doesnt slide out of the pocket well.
2) Body glove case- I like this case but it doesnt come apart easily.
3) Cheap ebay case- Discolored easily and doesnt come apart easily.
What im considering.
1) Seidio Innocase II- Im not sure how slick this case is and how easily it will slide out of a leather holster. I like that it will come apart easily so I can swap my battery and charge in my dock
2) Otterbox Commuter- Does this come off easily? Will this slide out of a holster easily?
3) Case Mate tough case- Does this come off easily? Will this slide out of a holster easily?
Im looking for suggestions so PLEASE help me out.
Try reading some reviews at www.goodandevo.net ... Jenn over there (same person who runs Pocketables) has reviewed quite a few of those items.
Novarider said:
I need some help finding the perfect case.
I want a case that is tight fitting not loose. I'm looking for a case that comes off easily so I can swap batteries and charge with my dock. I want it to be a full case not just the snap on ones that just cover the back. I dont want a strictly silicone case since they dont slide out of a leather holster easily and they are loose.
What I have tried.
1) Seidio Active- It was easy to take off but it discolors way to easily and doesnt slide out of the pocket well.
2) Body glove case- I like this case but it doesnt come apart easily.
3) Cheap ebay case- Discolored easily and doesnt come apart easily.
What im considering.
1) Seidio Innocase II- Im not sure how slick this case is and how easily it will slide out of a leather holster. I like that it will come apart easily so I can swap my battery and charge in my dock
2) Otterbox Commuter- Does this come off easily? Will this slide out of a holster easily?
3) Case Mate tough case- Does this come off easily? Will this slide out of a holster easily?
Im looking for suggestions so PLEASE help me out.
Click to expand...
Click to collapse
Have you tried the one made by HTC yet? It is a rubber case which comes off easily and it DOES fit with a holster, it is much easier to take out of the pocket since it is not that sticky rubber that pulls your pockets inside out when you pull it out. It's got a really smooth feel to it, quite nice , I got it like a month ago and it is working beautifully for me
Which case is the htc case? Can you post a link please?
What about the 'Barely There' cases by Case Mate? Anyone have experience with one of these?
LINK
I do not want a clip on case like that. I want one that wraps around the front edge of the phone all around the screen
I have both a red and a black innocase II and i think that it does indeed seem to fit your requirements for a case. The reason why i mentioned that i have two different colors is that i did manage to break the black one, but that was because i crushed it while the case was off of the device, when its on the phone everything is solid.
The black one is about the same slickness as the stock back battery cover, while the red one for whatever reason is a bit grippier than the black one. I don't have a holster to test but it seems like it wouldn't be too much trouble to slide it in and out of one, i can pull it out of my jeans pocket without difficulty for sure though.
Hi all,
Just wondering if anyone has/knows of an armband case for use with exercising that will fit the SGS2 with a TPU case on it?
Cheers.
If anyone's interested, I bought this from ebay which fits the phone + tpu case perfectly:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=230646006880&ssPageName=STRK:MEWNX:IT
hmm I might have to get one, how small does the strap go?
My arms are thin unless I tense my biceps but I can't keep it tense the whole time I am out running
I have had my otterbox defender case for three months now. Zero complaints, except now the silicone skin seems to not fit well around the case now, mainly the lower right corner. It is no longer snug, it seems pretty loose and just won't fit in it's lip without pooching the right side out of it's lip. Anyone else have this problem? and if you have found a solution what is it? If i told otterbox, do you think they would send me a replacement skin? Or state it isn't covered? I really like the case but, if this is what i have to look forward every three or so months, there are other options
I was wondering, is rubberized, titanium, or plastic better for the fishbone case?
I was wondering if you guys have any experience with the rubberized/titanium one as all the threads only talk about the one with the hard plastic.
Also, does the hard plastic on the back of the original fishbone scratch easily? Was thinking of either getting black or white version.
http://www.amazon.com/Rubberized-Protector-Faceplate-T989-II/dp/B006D8V0DO/ref=sr_1_7?s=wireless&ie=UTF8&qid=1354235799&sr=1-7&keywords=fishbone+t989
This is the site for the rubberized one.
Any opinions on fishbone cases in general would be greatly appreciated too!
Thanks!
I have this case and personally I'm not a big fan. The rubber portion of the case doesn't fit tight on the phone and can move around. I like TPU cases because they're typically pretty slim/light, cheap, fit snug, and they provide good protection against drops. I've used this one on several phones and haven't been disappointed. You can get them for ~$3 on ebay.
http://www.ebay.com/itm/SOFT-GEL-TP...119226?pt=PDA_Accessories&hash=item589661e1ba
gamzerz said:
I was wondering, is rubberized, titanium, or plastic better for the fishbone case?
I was wondering if you guys have any experience with the rubberized/titanium one as all the threads only talk about the one with the hard plastic.
Also, does the hard plastic on the back of the original fishbone scratch easily? Was thinking of either getting black or white version.
http://www.amazon.com/Rubberized-Protector-Faceplate-T989-II/dp/B006D8V0DO/ref=sr_1_7?s=wireless&ie=UTF8&qid=1354235799&sr=1-7&keywords=fishbone+t989
This is the site for the rubberized one.
Any opinions on fishbone cases in general would be greatly appreciated too!
Thanks!
Click to expand...
Click to collapse
akelty said:
I have this case and personally I'm not a big fan. The rubber portion of the case doesn't fit tight on the phone and can move around. I like TPU cases because they're typically pretty slim/light, cheap, fit snug, and they provide good protection against drops. I've used this one on several phones and haven't been disappointed. You can get them for ~$3 on ebay.
http://www.ebay.com/itm/SOFT-GEL-TP...119226?pt=PDA_Accessories&hash=item589661e1ba
Click to expand...
Click to collapse
I've use the rubberized one for awhile now. After pulling it out of my pocket enough time the case became loose and doesn't work well anymore. I just ordered a fishbone case in hopes that the metal will hold the rubber together better. I'll let you know how it works when I get it.
akelty said:
I have this case and personally I'm not a big fan. The rubber portion of the case doesn't fit tight on the phone and can move around. I like TPU cases because they're typically pretty slim/light, cheap, fit snug, and they provide good protection against drops. I've used this one on several phones and haven't been disappointed. You can get them for ~$3 on ebay.
http://www.ebay.com/itm/SOFT-GEL-TP...119226?pt=PDA_Accessories&hash=item589661e1ba
Click to expand...
Click to collapse
Was thinking about getting this earlier but then i felt someone else's and didn't like how it felt. Now I'm thinking of getting the diztronic case or maybe a ballistic case. Leaning towards the diztronic though.
gamzerz said:
Was thinking about getting this earlier but then i felt someone else's and didn't like how it felt. Now I'm thinking of getting the diztronic case or maybe a ballistic case. Leaning towards the diztronic though.
Click to expand...
Click to collapse
Well I got my fishbone case. Come to find out the fishbone is plastic. Other than that I am much happier with this product. The rubber seems to be of better quality and the plastic allows it to slide in and out of my pocket without stretching the rubber.