Develop Bugs

[q] ruu stock image advice please

Hello all!
I want to get my ONE X back to stock image and I have done some of the research already with the below info
How to : go to bootloader / fastboot mode
(even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- run/doubleclick RUU and follow instructions.
But could someone explain what RUU i would need for my mobile as I am on O2 mobile and I have the CM rom currently, which i am finding hard to get along with and just want it back to stock.
Could you guys help me with the extra info and downloads I need please!?
Kind regards

use "fastboot getvar main-version" (not sure if syntax is correct) , so you can search for your ruu.
post your hboot,radio versions and handy xda members will be EAGER to help

Vcek said:
use "fastboot getvar main-version" (not sure if syntax is correct) , so you can search for your ruu.
post your hboot,radio versions and handy xda members will be EAGER to help
Click to expand...
Click to collapse
is this the correct info or to much?
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.0000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.206.2
(bootloader) serialno: HT267W102187
(bootloader) imei: *53*26*50*66*12
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4001mV
(bootloader) devpower: 82
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
If not what is the correct command? the one above doesnt work i am afraid!
cheers all please help

Sorry to repost but I urgently need help as I am without a mobile at the moment, my phone just keeps rebooting into the bootloader and it says relocked at the top.
I need the correct RUU file for my phone please help peeps be much appreciated !!

Jadc007 said:
Sorry to repost but I urgently need help as I am without a mobile at the moment, my phone just keeps rebooting into the bootloader and it says relocked at the top.
I need the correct RUU file for my phone please help peeps be much appreciated !!
Click to expand...
Click to collapse
every time I try and load a command I get " Failed <Remote:00120000>> "
with anything I load ,
I just need the RUU 2.17 for O2 because all the others I have download come back saying my device cannot be updated because they are older versions?
no realises how urgent I need this and no can help me?!
Please guys

[Q] One X hboot

Can anyone help? I'm trying to upgrade my hboot so i can use the new MIUI v5.
I installed the rom and it was buggy and crashed frequently, so i think this may be causing it as the RD version says i need hboot 1.3 or higher mine is 0.94.0000
My CID is H3G_001 which i cant find on this thread http://forum.xda-developers.com/showthread.php?t=1957376
I found this thread but i think i can't use it on my device as i'm in the UK but i may be wrong? http://forum.xda-developers.com/showthread.php?t=1870652
Is it possible for me to upgrade the hboot? And if not would this be causing the problem of freezing on MIUI v5?
Thanks
Just found this link http://forum.xda-developers.com/showthread.php?t=1927048 but unsure if it will work?

Post the result of fastboot getvar version-main
We Will find a suitable ruu for your device... Then you can return to full stock and they update ota to jellybean... And then flash the latest miui..
If your sure that you are comfortable with flashing a firmware to update.. Then only do it... I would always prefer ota update!
-Sent from my IceCold One X!

vin4yak said:
Post the result of fastboot getvar version-main
We Will find a suitable ruu for your device... Then you can return to full stock and they update ota to jellybean... And then flash the latest miui..
If your sure that you are comfortable with flashing a firmware to update.. Then only do it... I would always prefer ota update!
-Sent from my IceCold One X!
Click to expand...
Click to collapse
version-main: 1.28.771.9
I'm on the viperX rom now is that not jellybean? I'm happy to update either way if you wouldn't mind helping me?
Basically since i got the phone i used it as standard to start then installed viperx and havent changed since.
I still have my unlock.bin and i believe i have a backup that i did before i installed viperx if that helps.

DannyBLOL said:
version-main: 1.28.771.9
I'm on the viperX rom now is that not jellybean? I'm happy to update either way if you wouldn't mind helping me?
Basically since i got the phone i used it as standard to start then installed viperx and havent changed since.
I still have my unlock.bin and i believe i have a backup that i did before i installed viperx if that helps.
Click to expand...
Click to collapse
Here's the ruu for your device : http://bugsylawson.com/files/file/1...9-radio-1120410314h-release-256494-signedexe/
Lock your Bootloader : fastboot oem lock
And then run the ruu with admin privileges... It will take you back to full stock and then you can ota update to jellybean..
There are 2 versions of viperx.. Jb and ics.. You must have used the ics one..
-Sent from my IceCold One X!

vin4yak said:
Here's the ruu for your device : http://bugsylawson.com/files/file/1...9-radio-1120410314h-release-256494-signedexe/
Lock your Bootloader : fastboot oem lock
And then run the ruu with admin privileges... It will take you back to full stock and then you can ota update to jellybean..
There are 2 versions of viperx.. Jb and ics.. You must have used the ics one..
-Sent from my IceCold One X!
Click to expand...
Click to collapse
Thanks!
Just downloading it now, so when i run that i just need to do an update as normal (like if you werent rooted).
Then i unlock the bootloader as normal with my previous unlock.bin or should i make a new one?
I take it i won't need to reinstall my recovery? All i will need to do after is flash the miui boot.img and then the rom?
Appreciate your help!

1: ruu
2: update as far as you can
3: unlock with the same .bin
4: flash a new recovery
5: make a new nandroid backup
6: flash the new boot.img
7: perform a full wipe
8: install the new rom
9: reboot
10: enjoy

Mr Hofs said:
1: ruu
2: update as far as you can
3: unlock with the same .bin
4: flash a new recovery
5: make a new nandroid backup
6: flash the new boot.img
7: perform a full wipe
8: install the new rom
9: reboot
10: enjoy
Click to expand...
Click to collapse
What recovery would you recommend? Sorry for many questions just dont want to get this wrong.
I used CWM in the past so i assume the latest version from their site should be fine 5.8.4.0

Im using Philz touch recovery, based on CWM. Personal best choice at this time.
http://forum.xda-developers.com/showthread.php?t=2240646

I just ran the RUU and i'm still on 0.94.000, did i do something wrong?
I relocked the bootloader before i did this and it said it completed it fine. My phone has completely reset but still old hboot?
Can anyone help????
Edit - i'm an idiot, haven't tried to update it yet, trying it now.

See point #2 ! (inside phone menu)

Mr Hofs said:
See point #2 ! (inside phone menu)
Click to expand...
Click to collapse
All sorted now, thanks for your help!
Its working perfectly

Very good ! :thumbup:
CASE CLOSED !

HOX Driving me crazy
hello every body
please i need help for upgrading my HOX hboot.
my problem is the same like yours i can not change the Hboot that i have and it blocks all my tentatives to install Jb custom ROMs.
so my HOX is on HBOOT: 0.94, CID: vodap203, and S-On.
please i want try the same way like my friend return to stck ruu and get the OTA update but i dont know what RUU i can use.
advence THanx to every body try to help
best regards

kth.hassan said:
hello every body
please i need help for upgrading my HOX hboot.
my problem is the same like yours i can not change the Hboot that i have and it blocks all my tentatives to install Jb custom ROMs.
so my HOX is on HBOOT: 0.94, CID: vodap203, and S-On.
please i want try the same way like my friend return to stck ruu and get the OTA update but i dont know what RUU i can use.
advence THanx to every body try to help
best regards
Click to expand...
Click to collapse
Post the result of fastboot getvar version-main please...

vin4yak said:
Post the result of fastboot getvar version-main please...
Click to expand...
Click to collapse
tahnk you VIN4YAK for your quick answer
thats the result of the getvar
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.94.
(bootloader) version-baseband: None
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.163.9
(bootloader) serialno: HT241W118847
(bootloader) imei: 359188044615755
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 3951mV
(bootloader) devpower: 74
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.841s

kth.hassan said:
tahnk you VIN4YAK for your quick answer
thats the result of the getvar
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.94.
(bootloader) version-baseband: None
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.163.9
(bootloader) serialno: HT241W118847
(bootloader) imei: 359188044615755
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 3951mV
(bootloader) devpower: 74
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.841s
Click to expand...
Click to collapse
hello again
I'm still blocked
and have no idea to solve this problem
the only light i found is on chineese site that i can't use because the defficult rules
the ask me to answer a question i could not find if some body can take a look
this is the site: i can not post it because im new
pls help

[Q] HOX stuck in bootloop and cannot restore stock ROM

Hi,
I've using CM 11 for a while on my HOX. I didn't have the backup of my original ROM. I didn't think I'd need to sell the phone but I wanted to and I was told to restore the stock ROM back. I thought I got the correct RUU and when I tried to flash (after relocking bootloader and erasing cache), I was told by RUU GUI that there was a bootloader version problem. Reading about it, I found that my HBOOT version is 1.72.0000 and the RUU showed something like 1.29.
After reading further I found that I was downgrading the HBOOT and for that I need to have S-OFF (I have S-ON).
I then extracted the ROM.zip file from the RUU and tried to flash the system.img and boot_signed.img files and found myself in a situation where the phone goes into a boot loader loop.
The battery has been dead and I'm also plagued by the power management bug in HOX ( doesn't charge at all and had to leave it on for days). Luckily it started charging again but since the phone goes into a bootloader loop, the battery is dying.
I found the fastboot-battery-recharge on this forum where I'm trickle charging it.
Can you help me flash the original ROM back by identifying the correct RUU (android files. org)?
My phone details:
F:\HOX>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.164D3.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.161.3
(bootloader) serialno: XXXX
(bootloader) imei: XXXX
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: low
(bootloader) battery-voltage: 3547mV
(bootloader) devpower: 0
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
I downloaded this RUU: RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
Would this work when the phone is charged?
Please assist as I want to sell the phone.
Thanks in advance guys.

The battery seems to have charged a little bit and I tried the RUU mentioned above, but it doesn't run fully. I get the initial messages to accept about battery being 30% etc, and then I'm shown the current image versoin 4.17.xxx and then the "Update" button. When I click it, the RUU just closes. I'm trying to download another RUU: RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed.exe
In case there was something wrong with the ROM..

The flashing of the second RUU failed this time with error 158. Incorrect RUU. So I went ahead and unlocked bootloader again and CM is back working now thankfully. I still don't know how to flash it with stock ROM correctly. I'm reading about downloading some Nandroid backups 3.20.x versions and restoring it.
I don't want to risk anymore, so please let me know.
Standing by.........

corpuscallosum said:
The flashing of the second RUU failed this time with error 158. Incorrect RUU. So I went ahead and unlocked bootloader again and CM is back working now thankfully. I still don't know how to flash it with stock ROM correctly. I'm reading about downloading some Nandroid backups 3.20.x versions and restoring it.
I don't want to risk anymore, so please let me know.
Standing by.........
Click to expand...
Click to collapse
You will never succsses to flash RUU no RUU for this high main version restore nandroid or install custom rom on it

Ok thank you. That clarifies about RUU flashing. I have downloaded 3.14 (VODAP0001) Nandroid from one of pages of this site and follow the instructions to flash. Hopefully I'll get stock ROM back then.
Do I need to have the stock recovery also? Is stock recovery required for OTA and when factory reset on the stock ROM it would revert back to factory state (going through setup process again)?

corpuscallosum said:
Ok thank you. That clarifies about RUU flashing. I have downloaded 3.14 (VODAP0001) Nandroid from one of pages of this site and follow the instructions to flash. Hopefully I'll get stock ROM back then.
Do I need to have the stock recovery also? Is stock recovery required for OTA and when factory reset on the stock ROM it would revert back to factory state (going through setup process again)?
Click to expand...
Click to collapse
3.14 will not work you will have problem with the tuch will not work you need nandroid with your numbers. Yes stock recovery is need for OTA but you are with latest base I think

Ok. I think I'm having trouble identifying the correct versions then. I thought 3.14 is the bootloader version. Is that the baseband version then?
Since I have 5.1204, do I need to download a Nandroid 5.1204 version?

Can i get some help please unbricking mine i cant seem to find the correct ruu any where ive already relocked the bootloader and now ive been stuck with out a phone for 2 weeks
X:\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.164D3.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.161.3
(bootloader) serialno: SH25AW109670
(bootloader) imei: 354461055970384
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3793mV
(bootloader) devpower: 71
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 1.050s
this is all ive got id really apreciate any help

corpuscallosum said:
Ok. I think I'm having trouble identifying the correct versions then. I thought 3.14 is the bootloader version. Is that the baseband version then?
Since I have 5.1204, do I need to download a Nandroid 5.1204 version?
Click to expand...
Click to collapse
you need nand backup with this numbers 4.17.161.3 this with the red is important dont look your CID if you find nand with this numbers is the prfect like 4.18.401.4 this with the red is WWE region, in your case is 161 maybe this is Vodafone I don't know Germany or UK
---------- Post added at 11:34 PM ---------- Previous post was at 11:33 PM ----------
RayOneX said:
Can i get some help please unbricking mine i cant seem to find the correct ruu any where ive already relocked the bootloader and now ive been stuck with out a phone for 2 weeks
X:\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.164D3.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.161.3
(bootloader) serialno: SH25AW109670
(bootloader) imei: 354461055970384
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3793mV
(bootloader) devpower: 71
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 1.050s
this is all ive got id really apreciate any help
Click to expand...
Click to collapse
If you read the hole thread you will see no RUU for this main version and unlock your bootloader and flash recovery and then custom rom or nand backup with this numbers 4.17.161.3

Thant said:
you need nand backup with this numbers 4.17.161.3 this with the red is important dont look your CID if you find nand with this numbers is the prfect like 4.18.401.4 this with the red is WWE region, in your case is 161 maybe this is Vodafone I don't know Germany or UK
---------- Post added at 11:34 PM ---------- Previous post was at 11:33 PM ----------
If you read the hole thread you will see no RUU for this main version and unlock your bootloader and flash recovery and then custom rom or nand backup with this numbers 4.17.161.3
Click to expand...
Click to collapse
Can i please get help doing this with a step by step instruction list or even links please
---------- Post added at 05:38 PM ---------- Previous post was at 05:29 PM ----------
RayOneX said:
Can i please get help doing this with a step by step instruction list or even links please
Click to expand...
Click to collapse
Nandroid Backup 4.17.161.2 CID VODAP001 thanks to alextheg will this be okay its from this page http://forum.xda-developers.com/showthread.php?t=1975140

Thant, thanks. I guess 4.17.161.3 is for me. I'll see if there's a uk based VODAP001.
I will use this: 4.17.161.2 CID VODAP001. Will follow the steps mentioned where I got the Nand backup itself.

wohoo!! I got the 'stock' ROM back!! Thanks Thant! You're brilliant! I also copied the recovery.img from the Nand backup. Can I flash that with cmd: "fastboot flash recovery recovery.img"? Can I erase cache and relock bootloader to see if I get OTA? Is that the correct way forward?

corpuscallosum said:
wohoo!! I got the 'stock' ROM back!! Thanks Thant! You're brilliant! I also copied the recovery.img from the Nand backup. Can I flash that with cmd: "fastboot flash recovery recovery.img"? Can I erase cache and relock bootloader to see if I get OTA? Is that the correct way forward?
Click to expand...
Click to collapse
you need stock recovery not this in the backup search for stok recovery for your base or download OTA and choice install later then take the recovery from OTA and flash it

Fixed!! HOX stuck in bootloop and cannot restore ROM
Perfect! I choose install later when the OTA came up on the phone, connected it to my computer and navigated to the download folder on my phone. Found the file : "OTA_ENDEAVOR_U_JB_50_S_Vodafone_UK_4.17.161.3-4.17.161.2_release_369941".
Extracted recovery.img from the firmware.zip file within, copied to my computer, put the phone in fastboot mode and flashed the recovery using command: fastboot flash recovery recovery.img.
That was it. Rebooted the phone and installed the OTA without any issues!!
It back to factory state. Thanks a million Thant!!

corpuscallosum said:
Perfect! I choose install later when the OTA came up on the phone, connected it to my computer and navigated to the download folder on my phone. Found the file : "OTA_ENDEAVOR_U_JB_50_S_Vodafone_UK_4.17.161.3-4.17.161.2_release_369941".
Extracted recovery.img from the firmware.zip file within, copied to my computer, put the phone in fastboot mode and flashed the recovery using command: fastboot flash recovery recovery.img.
That was it. Rebooted the phone and installed the OTA without any issues!!
It back to factory state. Thanks a million Thant!!
Click to expand...
Click to collapse
Good to hear that

Major Boot Loop Problem

I really hope someone can help me!!
Tried to flash new boot loader version to 3.19 to install CM12 through fastboot. Had an error at the end saying it failed. I then tried to go back to stock and update with OTA's to get the new boot loader version so I could flash CM12, but that didn't work either. Rebooted phone and it was dead. Tried to do a wipe and restore nandroid backup. Said it couldn't read file. When I had my 64gb SD Card in the phone the Radio and Open DSP come up as invalid on the boot loader screen. But if I put in a 1 gb SD card or no SD card the Radio and Open DSP are OK. Put in a 1gb SD card with the CM11 zip and tried to flash in CWM recovery, looked to install OK, but still gets stuck in boot loop. Have tried re-flashing a few times and no luck.
Bootloader unlocked, s-on,

Can you provide your
fastboot getvar
Here's a thread that could help you out
http://forum.xda-developers.com/showthread.php?t=2735235

jball said:
Can you provide your
fastboot getvar
Here's a thread that could help you out
http://forum.xda-developers.com/showthread.php?t=2735235
Click to expand...
Click to collapse
C:\fastboot_adb\fastboot_adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.206.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH44SWM10183
(bootloader) imei: 358714054617026
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s

Find the ruu exe. For your version main: 1.54.206.5 and relock your bootlooader so you can run the exe .if you could find the right exe that matches or use the WWE exe .

jball said:
Find the ruu exe. For your version main: 1.54.206.5 and relock your bootlooader so you can run the exe .if you could find the right exe that matches or use the WWE exe .
Click to expand...
Click to collapse
I can't find the RUU for 1.54.206.5 anywhere. I've found nandroid backups, images, etc for 1.54.206.5 but they won't flash (I my be doing something wrong). Any other ideas? Can I run a newer RUU?
I got the WEE 1.54.1540.10 BrightstarUS RUU but it said it wasn't compatible? My CID is o2___001. Do I need to try find something that matches that as well as 1.54.206.5?

pats87 said:
I can't find the RUU for 1.54.206.5 anywhere. I've found nandroid backups, images, etc for 1.54.206.5 but they won't flash (I my be doing something wrong). Any other ideas? Can I run a newer RUU?
I got the WEE 1.54.1540.10 BrightstarUS RUU but it said it wasn't compatible? My CID is o2___001. Do I need to try find something that matches that as well as 1.54.206.5?
Click to expand...
Click to collapse
Is the device functional

jball said:
Is the device functional
Click to expand...
Click to collapse
What do you mean by functional? I can flash different recoveries, boot into them and boot into bootloader and RUU, and I can lock and unlock bootloader.
Should I be able to flash any WWE version?

are U s-on or s-off of u are s-off u can change your cid and mid number and flash developer edition ruu

Sorry
I forgot you said it does not boot to the system
---------- Post added at 11:12 AM ---------- Previous post was at 11:10 AM ----------
Neynge said:
are U s-on or s-off of u are s-off u can change your cid and mid number and flash developer edition ruu
Click to expand...
Click to collapse
He's S-ON

htc one m8 optus stuck in bootloader loop, locked, s-on no idea what to do next

hi im really stuck i have a htc one m8 from optus AU and it wont boot just into system im stuck on either the fastboot screen or the hboot screen.
I've had the phone in storage for a few months battery was dead so i charged it up and now it wont boot properly
its locked and s-on and unmodified although on top of the menu it says ***software status: modified***
ive tried multiple things, RUU i cant find a version for my phone, other roms aren't signed so cant load them.... Anything else i can do?? i can at least run fastboot usb commands. I've tried getting twrp on there and again not signed.
All i can do from the menu is go into hboot but nothing works in there either, factory reset does nothing and the other options dont do anything worth mentioning.
here is my getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.980.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
any other ideas cause im all out?

Sethkore666 said:
ive tried multiple things, RUU i cant find a version for my phone, other roms aren't signed so cant load them.... Anything else i can do?? i can at least run fastboot usb commands. I've tried getting twrp on there and again not signed.
Click to expand...
Click to collapse
If there is no RUU for your version, your best option is to unlock the bootloader using HTCDev.com. After that, you will be able to install TWRP, and restore a stock nandroid or flash a custom ROM.
This is assuming you have no valid warranty on the device; nor wish to go the route of a warranty service?

redpoint73 said:
If there is no RUU for your version, your best option is to unlock the bootloader using HTCDev.com. After that, you will be able to install TWRP, and restore a stock nandroid or flash a custom ROM.
This is assuming you have no valid warranty on the device; nor wish to go the route of a warranty service?
Click to expand...
Click to collapse
cool thanks ill give that a go, pretty much the only thing i haven't tried

hi i tried the got on twrp and that works great, my next problem is that, ive install the GPE rom but now i gett a driver 19 error and my wifi and sim card dont work.

Sethkore666 said:
my next problem is that, ive install the GPE rom but now i gett a driver 19 error and my wifi and sim card dont work.
Click to expand...
Click to collapse
Did you search the ROM thread for those errors? Or try flashing a different ROM.
Also make sure you are using current version TWRP 3.0. Older versions are known to cause issues on more recent firmware and ROMs.
Otherwise, I see no reason for current ROMs to work on your phone (hboot and other firmware looks up to date).

yep tried 3 different roms and same issue cant driver error 19 and no wifi or simcard, and twrp is the latest, is it possible for my firmware to be messed up, or maybe my hardware is damaged?

Sethkore666 said:
yep tried 3 different roms and same issue cant driver error 19 and no wifi or simcard, and twrp is the latest, is it possible for my firmware to be messed up, or maybe my hardware is damaged?
Click to expand...
Click to collapse
You can try to flash the full firmware for your device version. If it's still the same problem then you may have hardware issue.
You can get the 6.12.980.5 full firmware.zip here - http://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
Run these commands :
fastboot oem lock (to relock bootloader as you have a S-On device)
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip fw_6.12.980.5.zip
then you'll see error, repeat
fastboot flash zip fw_6.12.980.5.zip
fastboot reboot
then see whether your problem is fixed or not.