Greetings,
I am trying to activate the voice dialing using the original stereo headset that came with the device, by clicking on the button, but nothing happens! Is there anything I should to?? I have tested the headset by calling myself and it's working fine apart from voice dialing activation.
Thanks.
The phone rings both the headset and the evo.
When anwering the call with the evo the call is not transfered to BT. Answering the call via the headset works correctly.
Voice dialing doesn't work through the headset. The Evo seems to turn on the speakerphone instead of listening to the headset.
Any ideas? Should I get an Iphone instead? (kidding)
it is supposed to answer at the headset if you use the headset to answer the call so if your bluetooth is not within reach you can still answer the call. Are you initiating voice dial thru the headset with a long press...Ihave the Pro and it works fine with my EVO
same here, if i answer on the headset it goes straight to headset, if i answer on phone it goes to phone until i press the call button and it transfers over
mccarthyand said:
it is supposed to answer at the headset if you use the headset to answer the call so if your bluetooth is not within reach you can still answer the call. Are you initiating voice dial thru the headset with a long press...Ihave the Pro and it works fine with my EVO
Click to expand...
Click to collapse
Yes long press.
Are your sure that Evo is hearing you via the headset?
I'd like to long press and then say "call home", which works if I'm close enough to the phone. If its on the dashboard I almost have to SCREAM.
tinfox said:
The phone rings both the headset and the evo.
When anwering the call with the evo the call is not transfered to BT. Answering the call via the headset works correctly.
Voice dialing doesn't work through the headset. The Evo seems to turn on the speakerphone instead of listening to the headset.
Any ideas? Should I get an Iphone instead? (kidding)
Click to expand...
Click to collapse
thats exactly how ALL BT headsets work, or are supposed to..
As far as voice dialing, it sounds like operator error, as I have the same headset, and it works perfectly for me all the time..
wase4711 said:
thats exactly how ALL BT headsets work, or are supposed to..
As far as voice dialing, it sounds like operator error, as I have the same headset, and it works perfectly for me all the time..
Click to expand...
Click to collapse
As far as operator error what could I possibly be missing? Its pretty straight forward.
Also I have the bug where in I speak to Vlingo and then turn off BT, EVO reboots.
I am trying to find a SIP client that works on CM10.1 over wifi. I have tried the following:
CSipSimple(latest trunk): whenever I try to make a call it unregisters an re-registers so nothing happens. When I try to receive a call it unregisters and re-registers.
SIPDroid: Try to make an outgoing call and for some reason it goes to the lockscreen while making the call. If the other end picks up I hear nothing and I have to force stop the app to end the call. With an incoming call the same thing happens. Locks the screen, I try to answer and it's dead air on both ends and the only way to end the call is to force stop.
Zoiper: It registers but there is no audio either way on incoming calls. On outgoing calls I can hear the other party but they can't hear me. I have the codecs set correctly.
Has anyone gotten SIP/VOIP to work on this phone with CM10.1?
jfd3220 said:
I am trying to find a SIP client that works on CM10.1 over wifi. I have tried the following:
CSipSimple(latest trunk): whenever I try to make a call it unregisters an re-registers so nothing happens. When I try to receive a call it unregisters and re-registers.
SIPDroid: Try to make an outgoing call and for some reason it goes to the lockscreen while making the call. If the other end picks up I hear nothing and I have to force stop the app to end the call. With an incoming call the same thing happens. Locks the screen, I try to answer and it's dead air on both ends and the only way to end the call is to force stop.
Zoiper: It registers but there is no audio either way on incoming calls. On outgoing calls I can hear the other party but they can't hear me. I have the codecs set correctly.
Has anyone gotten SIP/VOIP to work on this phone with CM10.1?
Click to expand...
Click to collapse
Same issue here. every sip I throw it in failed. Vonage mobile also failed. The only voip apps that I know works is grooveip.
Sent from my SAMSUNG-SGH-T989 using xda premium
I have gotten it to work and use it pretty extensively. I use csipsimple with pbxes.org but I don't use their gateway because I have had the problems you have described with them. Instead I use simontelephonics gateway with pbxes.org. My sets up is kinda complicated though because I have two lines and two gateways that I'm useing
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
What ROM are you using? I'm using the CM 10.1 nightly from a few days ago. I've tried PBXes.org and I get the same issue. When I try to make an outgoing call it unregisters and then registers again a few seconds later but the call is never made.
jfd3220 said:
I am trying to find a SIP client that works on CM10.1 over wifi. I have tried the following:
CSipSimple(latest trunk): whenever I try to make a call it unregisters an re-registers so nothing happens. When I try to receive a call it unregisters and re-registers.
SIPDroid: Try to make an outgoing call and for some reason it goes to the lockscreen while making the call. If the other end picks up I hear nothing and I have to force stop the app to end the call. With an incoming call the same thing happens. Locks the screen, I try to answer and it's dead air on both ends and the only way to end the call is to force stop.
Zoiper: It registers but there is no audio either way on incoming calls. On outgoing calls I can hear the other party but they can't hear me. I have the codecs set correctly.
Has anyone gotten SIP/VOIP to work on this phone with CM10.1?
Click to expand...
Click to collapse
3cx phone works.. Sure wish csipsimple was working though
jfd3220 said:
I am trying to find a SIP client that works on CM10.1 over wifi. I have tried the following:
CSipSimple(latest trunk): whenever I try to make a call it unregisters an re-registers so nothing happens. When I try to receive a call it unregisters and re-registers.
SIPDroid: Try to make an outgoing call and for some reason it goes to the lockscreen while making the call. If the other end picks up I hear nothing and I have to force stop the app to end the call. With an incoming call the same thing happens. Locks the screen, I try to answer and it's dead air on both ends and the only way to end the call is to force stop.
Zoiper: It registers but there is no audio either way on incoming calls. On outgoing calls I can hear the other party but they can't hear me. I have the codecs set correctly.
Has anyone gotten SIP/VOIP to work on this phone with CM10.1?
Click to expand...
Click to collapse
I do a lot of VOIP work and it almost sounds like you don't have the ports open to your phone box. If you're on asterisk TCP/UDP 5060-5080 and UDP 10001-20000 to get audio to work. Just a stab into the dark.
Just found one that works with CM10.1 (I'm on 06/02/2013nightly), MizuDroid. Works great so far and has tons of options!
djxs said:
Just found one that works with CM10.1 (I'm on 06/02/2013nightly), MizuDroid. Works great so far and has tons of options!
Click to expand...
Click to collapse
Nice find! Seems to be working for me too!
jfd3220 said:
Nice find! Seems to be working for me too!
Click to expand...
Click to collapse
As you might already know, you have to change some Sound settings first, especially if you want calls through the ear piece. I believe this is why the built-in SIP client in CM10.1 doesn't work, it's using the wrong audio inputs/outputs.
The Audio recorder should be set to use the mic, not default or auto guess (Voice call, Voice downlink, Voice uplink, Voice communication don't work either). The Audio player to use System sounds (only option that routes the call through the ear piece). Speakerphone player is set to Music playback, and Speakerphone output to Speaker Forced, although Speaker works also.
Groove IP works.
Csipsimple doesnt.
djxs said:
As you might already know, you have to change some Sound settings first, especially if you want calls through the ear piece. I believe this is why the built-in SIP client in CM10.1 doesn't work, it's using the wrong audio inputs/outputs.
The Audio recorder should be set to use the mic, not default or auto guess (Voice call, Voice downlink, Voice uplink, Voice communication don't work either). The Audio player to use System sounds (only option that routes the call through the ear piece). Speakerphone player is set to Music playback, and Speakerphone output to Speaker Forced, although Speaker works also.
Click to expand...
Click to collapse
Your tips proven to be right. the only sip client can be configured like that is mizudroid. Finally I jump into 4.2.2 boat. Thanks.
Sent from my SGH-T989 using xda premium
I got csipsimple to work by changing the following option:
Settings (Expert) > Media > Audio Troubleshooting > Audio Implementation > change from OpenSL-ES to Java
Apparently CM10's OpenSL-ES doesn't work.
tsuda said:
I got csipsimple to work by changing the following option:
Settings (Expert) > Media > Audio Troubleshooting > Audio Implementation > change from OpenSL-ES to Java
Apparently CM10's OpenSL-ES doesn't work.
Click to expand...
Click to collapse
Another great tips! I am using the latest nightly version on 4.2.2. Sip call seems to be working great
Sent from my SGH-T989 using xda premium
Has anyone found a program that will actually recognize your voice and dial a contact when you press the "call" button on your headset while on a AOSP rom?
It works fine on TouchWiz stuff; S-voice does a good job of this, but, I have tried a few programs, like ECID, and they never actually recognize your voice or contact name...and, I have tried it on several high end BT headsets, so I know its not the headsets issue..
thanks!
I think I know the answer to this but I'll ask anyway:
Does Bluetooth voice dialling work on any AOSP ROMs? I can hear people when in a call through my visor speaker in the car but if I try to use it for dialling a contact by pressing the button the voice search app loads but doesn't hear what I say.
And if it doesn't work with AOSP on the Note 2 does it work with other mobiles or is it an Android issue? It used to work fairly well with SVoice and Samsung ROMs.