Alright so I currently have a blue Galaxy S III and am running a ROM that allows me to use soft buttons and disable the hardware buttons (by soft buttons I mean the same setup as Google's last two Nexus devices). So onto the case / cover question I am wondering if anybody knows of a case or cover that is red, covers the menu, home, and back button and doesn't suck. Right now I have the mercury screen cover and while it does make the front of the phone red it doesn't cover the blue home button and still shows symbols for the menu and back button which I dont use. Thanks in advance everybody!
This thread should be posted in accessories not q&a.
But you most likely won't find a case designed for this phone that covers up the buttons. Any case would be designed to use the phone as is.
A question for you though. Why do you like the soft keys? Don't you lose screen real estate? If I wanted a smaller screen I would have gotten an Iphone
Sent from my SAMSUNG-SGH-I747 using xda premium
Related
I'm curious to know if you can get it back together with all the seems as tight as when it was new. I want to get a new case off ebay but I want to know if there's problems with if fitting together again after it's been disassembled.
I was able to do it. It came out pretty good but I did slightly bend the metal edge of the new frame when I had to reopen it to align the reset button cover. But it's so slight, no one would ever be able to tell but me. All in all, it wasn't too bad, but it was just nerve racking having your $500 phone ripped apart and wondering if it will work when you put it back together - if you can get it back together. I was so relieved when I got the WM screen again!
A few pieces of advice:
For one, the instructions I read just said to disconnect the ribbon cables. Well it doesn't say that all you have to do is flip up the little plastic part to release the tension from the ribbon. (figured that out the hard way)
Also, make sure the rubber covers for items like the mic and reset button line up before you resecure the board to the frame. You DON't want to have to reopen it.
My phone will now stay covered with an excellent silicone cover made by Boxwave. The cut-outs are precision - you can get to everything. Also, it fits nice and tight like a glove. And it's just thick enought to protect, fit in the carrying case, and allow you to use all the buttons easily, especially the scroll wheel. (my last cover was too thick to use it with the cover on) I don't want to have to do this surgery an my phone any time in the near future so this is staying on my phone.
Problem when change housing
Yesterday I've change my M700 housing with P800. But as we know, they have different button map.
Now, I am trying to set up a hotkey for the Call button (Green button),
ie, when I press the call button, an application of my choice would
start running. For that I need to change the default settings in the
registry of the Pocket Pc. Could someone tell me where the default
settings of the call button is stored in the registry and what all
values should I change in the registry so that I can setup the call
button hotkey. Any help would be highly appreciated.
Why not just download hbutton and map as many programs as you like to the other available buttons? I've got like 12 prog mapped to 5 buttons.
Edit: Oops. I missed the point of your post. The buttons are mapped differently.
So I bought my first ever android device the other day, an Xperia Arc S. Love it to bits, however I really am paranoid.
I haven't bought a case yet, so I dont take the phone outside (use my old phone) and I haven't got a screen protector yet either.
I was looking up screen protectors for the Arc S online and I came across a post that said apparently the phone comes pre-installed with a screen protector. Is that true? I know I have a spare set of screen protectors that came with the box, along with the HDMI cable, USB cable, Mains adapter and Headphones. However, no leather case as I've seen people mention!
I'm in the UK so it's a UK phone, and bought it Sim free and it's the white one.
If it does have a screen protector on, is the protection enough? Should I put on another screen protector, just to be safe?
yeah they come with screen protectors on. look at the corners/edges in the light and you can make it out. i've found the screen protector is enough protection, although if you are prone to dropping your phone often, you may want to consider purchasing a case/pouch.
also before you put another screen protector on, remember that screen protectors tend to dim the display as it creates another layer for the light to go through. also this extra layer means you may have to press a bit harder on the screen.
I even removed the factory applied screen protector as it was scratched up a bit and so far no scratches on the screen.
Sent from my iPad 2 using Tapatalk
Thanks guys, so I take it it's a global thing, rather than it being region specific?
I've bought a case and pouch (hasn't been delivered yet)
Since you guys are owners of the Arc S, how do you feel about the bottom 3 buttons? Do they feel a bit loose and flimsy to you?
Got the Arc without S and the buttons don't feel lose.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Got the Arc without S and the buttons don't feel lose.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
Hmm that is a bit worrying. What I mean is that the other 2 buttons (back button and settings button) seem to only have one connection point (in the middle of either buttons) and because the buttons are long, as they move towards the Home button, it feels really loose, and I can press that part of it quite inwards without the phone responding?
itsmyname said:
Hmm that is a bit worrying. What I mean is that the other 2 buttons (back button and settings button) seem to only have one connection point (in the middle of either buttons) and because the buttons are long, as they move towards the Home button, it feels really loose, and I can press that part of it quite inwards without the phone responding?
Click to expand...
Click to collapse
My home button feels quite loose, other 2 buttons feels better.
via Sony Ericsson Xperia
Also I have a question, don't need to make a new thread for it I reckon:
The top of my screen (statusbar) burns in a bit, probably because of water (leaving it unprotected in a damp bathroom, I'm a dumbass). But there's another issue. I've got a lot of dead pixels in the top half of my screen, maybe ten of them, they're easy to spot on a black background. Could that be caused by suspected water damage too?
I've contacted support, and they said their logistics partner would call me to let them get my phone, but after two missed calls they haven't called in weeks (suckers).
The sticker on my battery hasn't coloured btw, and no other issues on the phone too.
via Sony Ericsson Xperia
Hi guys,
I had a problem with my volume button. It simply fell, and since then it`s pretty tough to use it.
So, I ask two things:
1 - Does anyone knows a good volume widget that looks like it belongs to the ICS theme? Most i found looked pretty awful on the starting screen.
2 - How can I fix the problem? I thought about using some kind of superglue, but it would simply have no flexibility to press the buttons anymore...
Thanks in advance for any help at all.
radjan said:
Hi guys,
I had a problem with my volume button. It simply fell, and since then it`s pretty tough to use it.
So, I ask two things:
1 - Does anyone knows a good volume widget that looks like it belongs to the ICS theme? Most i found looked pretty awful on the starting screen.
2 - How can I fix the problem? I thought about using some kind of superglue, but it would simply have no flexibility to press the buttons anymore...
Thanks in advance for any help at all.
Click to expand...
Click to collapse
Use 'kitchen & bathroom sealant' or 'No nails glue'
Just use a spec of it in the middle of the button, not the phone & gently hold it in (on the inside plastic so it sticks). Then cotton bud to wipe access glue off if there is any (which there shouldn't be)
Happened to me, at first i used double sided tape but it kept & falling off
AwaisKhan said:
Use 'kitchen & bathroom sealant' or 'No nails glue'
Just use a spec of it in the middle of the button, not the phone & gently hold it in (on the inside plastic so it sticks). Then cotton bud to wipe access glue off if there is any (which there shouldn't be)
Happened to me, at first i used double sided tape but it kept & falling off
Click to expand...
Click to collapse
Worked like a charm. Thanks for the help!
radjan said:
Worked like a charm. Thanks for the help!
Click to expand...
Click to collapse
Your welcome!
Sent from my R800i using xda premium
The main problem here I suppose is that the XPlay's volume button, unlike the previous Java-based SE phones (i.e. K810i, which I previously owned), do not have the extra piece of plastic around the volume button that acts as an anti-dropping-off catch for the hole to which it fits in. It's a weird move by SE I suppose. Thinking how the rubber part easily separates from the actual volume button, I can imagine there are a lot of XPlay users who get disappointed going home to see their volume button has fallen off somewhere on the road when they were on their way home. Shame. Good thing mine fell off when me and my wife were browsing pictures of our baby in my bed. Jeez.
This with reference with other threads talking about changing colours:
such as minotauri's thread so check his thread out too.
Purpose of this thread
Just wanted to share my pics (at Bottom) and helpful tips for any first time doers to customizing...or have a place where you can ask questions some noobs might think are stupid but it's cool that what this is for
Obviously i'm not responsable for anything that YOU do TO YOUR phone ...just a disclaimer just incase...obviously this is not rocket science but better safe ...and OBviously Not responsible for the Sellers on ebay...and what they do. Your actions are your own...thanks now that's clear ...we move on.
Ok so i had a black t989d samsung galaxy S II from telus
I bought a white vinyl decal and a white battery door of ebay.
Ebay links of the ones i bought (links may expire over time)
White Door : http://www.ebay.ca/itm/OEM-BATTERY-...785829?pt=PDA_Accessories&hash=item35b9c24ee5
White vinyl decal (basically like a sticker but it will not leave marks or glue on you screen so it's safe)
http://www.ebay.ca/itm/White-Vinyl-...495791?pt=PDA_Accessories&hash=item19cd79d3ef
Tips :to applying the vinly on the front
i would recommend buying 2 vinyls just to be safe or mess up sticking it properly...the stickness is best the first time/ second time
Clean your phone first -microfibre clothes are best...like those tiny cloth sheets that comes with sunglasses
I say second time only if you didn't press down firmly on it to make it stick if you just gentle drop on using mainly the weight of the sticker itself it cool to remove it and re-adjust 2 maybe 3 times
Obviously remove the holes for the camera and hearing speaker
Use the bezel, the silver frame that goes around the sides of your phone to guide yourself to being straight
APPLYING:
The way i apply it is holding the top Thick / fat part (front facing camera ) on edges (so it doesn't stick to my fingers) with first finger and thumb rougly around the centre same thing with the bottom part with the 4 android buttons (both hands being above the sticky part not below)
then use my middle fingers to push the lines along the frame to make them come straight....more importantly trying to line up the bottom so the lights light up the drawings on the stick for the 4 button it won't come perfect which is ok but the light should be really close to it if you line up the bottom with the silver frame
Note for the camera part there's an outline sticker that goes around the camera piece as well ...for that remove the battery door is makes it easier
What my black phone looks like after:
Front and back image - Pic 1 and 2
Battery door / camera piece can be seen- Pic 3
LED light 4 buttons - Pic 4
DON't forget to HIT the THANKS button (thumbs up) if you found this helpful
Can you put this on to of a screen protector or does it come with its own?
Sent from my SGH-T989 using xda premium
xxKamikazexx said:
Can you put this on to of a screen protector or does it come with its own?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Umm sure but the screen protector should ideally, either cover the entire front including the top, like around the front camera etc...or be the same size or smaller then the rectangle that fits inside the frame of the white vinyl ...only because it will have a weird little raised outline underneath of the protector...if you don't mind that then yeah should be fine...hopefully that makes sense what i said and it's not confusing LOL (PS unfortuantely it doesn't come a protector for the screen)
an alternative...just an opinion ... would be you could get another screen protector (i know a lil more costly) then remove the old one...place the white vinyl on the phone take the new protector (without pealing the back thingy that protectors the stickness) place on top of the phone trace with a marker (on the side that peals away of course)cut the outline with an exacto (X-acto) knife *after tracing, take it of the phone to use the exacto lol just saying to be safe...never know people may try exacto on top of their phone LOL *
Hope that helps...feel free to ask any other questions
Looking for a front vinyl without the four android buttons printed on. Just clear black, white, or carbon. Does anyone know where to get one for the T989? Thanks.
ebrkic said:
Looking for a front vinyl without the four android buttons printed on. Just clear black, white, or carbon. Does anyone know where to get one for the T989? Thanks.
Click to expand...
Click to collapse
Ummm that would be tough to find....the only place where it might be possible ....is gela skins
http://www.gelaskins.com/store/phones/Galaxy_S_II_T_Mobile/collection/Most_Popular
you can create you own stuff here soo plain white might be possible...but i would recommend emailing them first to make sure...hope that helps
Front Sticker and Buttons
How did you align you buttons so well, i cant seem to get them to overlap right.
UnDaRkEnEd said:
How did you align you buttons so well, i cant seem to get them to overlap right.
Click to expand...
Click to collapse
yeahh that is a bit tricky but if you look closely i'm not exactly on the light i'm slightly off ...it's nearly impossible to get it dead on 100% but if the light falls under to light up the printed button it should be good enough....i actually mainly focused on the framing the whole as straight as possible using the bezel (silver frame of the phone) as the guide...the button should line up roughly 95% if you get it straight frame on frame... if it helps my top corners both left and right have a lil black space showing (around the curves) you can't even see it really....it cuz i focused on making sure my front camera and senors were not covered and then lined everything up downwards.....hopefully this makes some sense...LOL
wow nice job looks just like my white SGS2
How does the back housing feel on this? Looks really shiny & perhaps isn't similar to the original.
Sent from my SGH-T989 using XDA
Mastelotto said:
How does the back housing feel on this? Looks really shiny & perhaps isn't similar to the original.
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
Yeap your correct, it isn't like a the ...textured finish the black on has but yeah its a smooth clean finish and i guess glossy as well.
kosh2thamax said:
Yeap your correct, it isn't like a the ...textured finish the black on has but yeah its a smooth clean finish and i guess glossy as well.
Click to expand...
Click to collapse
Its more slippery but not major
Sent from my SGH-T989 using xda premium
just applied mine! it put it right on top of the screen protector and it actually worked out pretty well! looks sexy
Just put mine on top of the screen protector too... looks awesome thanks for sharing this with us!!!
Sent from another galaxy out of this world!!
I know I'm digging up an old thread but I was interested in now these have held up over time?
Sent from my SGH-T989 using xda premium
This doesn't pertain to how well they hold up but I did have one on my phone for maybe a month or more then I decided I was tired of the white lol.now I'm thinking I may get another just to get a different look again lol.
I find it very difficult to wake the phone with the power/wake button. Just the angle of the bezel and how flush the IR button is makes it much more of a chore compared to any other phone I've used. Does anyone know of a case that can remedy the situation? I don't care if it covers the IR.
I bought the poetic case off amazon (3rd revision) and it doesn't help with the flush power button issue. Since no one responded I'll keep updating as I get more cases. Sad.
I don't know how tough it is to remove the old poetic case (since everyone seem to gush about how difficult it is) but I don't find it very hard. Simply pry open one corner then expand the gap and it pops off pretty easily. I much rather have a tight case than a lose one *wink*
Currently waiting on basal case. Don't know if I should just exchange then phone because of the recessed button.
I came across this:
http://www.ebay.ca/itm/for-HTC-One-...hone_PDA_Cases&var&hash=item5d3d09adf1&_uhb=1
I think i might buy this one
isinisterx said:
I came across this:
http://www.ebay.ca/itm/for-HTC-One-...hone_PDA_Cases&var&hash=item5d3d09adf1&_uhb=1
I think i might buy this one
Click to expand...
Click to collapse
I have one for my One S, and honestly it's junk. Its hard to put in your pocket because its grippy, and it collects lint constantly.
The rubber inside feels cheap, and loose around the sides where there is no support.
Sent from my HTC One S using Tapatalk 2
Well thanks for that lool
Here is my remedy for the power button and its awkward position. Never use it. Find a kernel with swipe to wake and then I use a sleep widget on the home screen to sleep. I double tap the bottom of the screen to wake it up. Works perfectly
I got the urban armor gear one off of ebay
Sent from my HTC One using xda premium
Yep the basal case sucks too. I actually flashed cyanogenmod nightlys and use the swipe to unlock feature. Got to swipe all the captivate buttons kinda like iPhone. Unfortunately there is a slight lag but that'll probably get cleared up when more stable releases are out.
xxquicksh0txx said:
I have one for my One S, and honestly it's junk. Its hard to put in your pocket because its grippy, and it collects lint constantly.
The rubber inside feels cheap, and loose around the sides where there is no support.
Click to expand...
Click to collapse
That's because it is made of silicone. That's one material I hate... yes, even in the other way.
fffssslll said:
Yep the basal case sucks too. I actually flashed cyanogenmod nightlys and use the swipe to unlock feature. Got to swipe all the captivate buttons kinda like iPhone. Unfortunately there is a slight lag but that'll probably get cleared up when more stable releases are out.
Click to expand...
Click to collapse
Hmmm... for the time I'm running CM 10.1, I'm using volume wake and hold menu to lock. I'm sure it saves battery life because the capacitive panel is off when asleep. Plus when I had S2W enabled, it seemed that I could never get it right the first time.
Agreed, I too also had this case on my one s and it's really crappy and too loose in the areas where the hard plastic doesn't wrap the case
Sent from my HTC One using xda premium
The urban armor gear makes the volume button so much better than without it, though the wake button stays the same maybe even abit worse..