Related
Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.
bigshotrob22 said:
Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.
Click to expand...
Click to collapse
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.
PRL
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.
ejdavis72 said:
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.
Click to expand...
Click to collapse
I did all that last night with qpst. I am able to get 3G now because I manually updated my PRL to 3220 (or something like that). I have everything working like talk, text, MMS but I cant update through *228. Thanks for your response.
ejdavis72 said:
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.
Click to expand...
Click to collapse
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.
bigshotrob22 said:
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.
Click to expand...
Click to collapse
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.
ejdavis72 said:
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.
Click to expand...
Click to collapse
I updated it but still a no go on the *228 update.
bigshotrob22 said:
I updated it but still a no go on the *228 update.
Click to expand...
Click to collapse
Try *22807 and see if that works.
ejdavis72 said:
Try *22807 and see if that works.
Click to expand...
Click to collapse
Tried that too
Sent from my DROIDX using XDA App
bigshotrob22 said:
Tried that too
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Try this one.
ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Ill try it in a bit
Sent from my DROIDX using XDA App
ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Didnt work either.
Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App
bigshotrob22 said:
Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know
iRage said:
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know
Click to expand...
Click to collapse
Yes she had an account previous to her Dinc so after i flashed her phone I called and got the MDN and MIN from cricket and also I gave them the MEID from the DINC..she has service but I just can't get the phone to get the OTA update and like you I've tried at least 30 prl's. Currently I have 32400 prl loaded on her phone with no problems but I know that's not the prl she is supposed to be using. By the way I live in tucson az..Thanks for your reply
Sent from my DROIDX
Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off
iRage said:
Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off
Click to expand...
Click to collapse
I know that happens when you update and I don't mind that but I just want her to pull the correct prl and eri files.
Sent from my DROIDX
BUMP
Sent from my DROIDX
RESOLVEDD!!!!
bigshotrob22 said:
BUMP
Sent from my DROIDX
Click to expand...
Click to collapse
hey buddy i just noticed that you are from tucson as well!
well let me tell you that i have flashed android phones to cricket (my own) like the evo, droid 1, eris and incredible. ad let me tell you its not as hard as it seems or people make it seem, so here it is! the attached zip file contains OUR NEW NATION WIDE PRL and flashing instructions. you do not need QPST if your phone is already unlocked with 000000 if you dial ##778.
anyways just put the prl on sdcard then dial ##778 then password is:000000
go to PRL>update PRL> then choose the prl i have attached then follow the instructions from step 3 (skip 1, 2) without skipping anything and you should have your web mms set up!!
however if you run to any problems PM me and ill help you or i can either meet up with you here in the southwest of town and ill do it for you.
Does anyone know if theres a patch available to help fix the slowness of data up to par with like say Syndacite Rom? I dont want to install a rom (for various reasons) but am rooted. Just wondering.
Yes for 3g go into your dialer and hit ##3282# then edit. Put in your msl code. If you don't have it call sprint and ask for it. Then hit other then multimedia. Change both proxy addresses to 0.0.0.0 and ports to 0
carnivalrejectq said:
Does anyone know if theres a patch available to help fix the slowness of data up to par with like say Syndacite Rom? I dont want to install a rom (for various reasons) but am rooted. Just wondering.
Click to expand...
Click to collapse
Sent From My Evo Killer!
musclehead84 said:
Yes for 3g go into your dialer and hit ##3282# then edit. Put in your msl code. If you don't have it call sprint and ask for it. Then hit other then multimedia. Change both proxy addresses to 0.0.0.0 and ports to 0
Click to expand...
Click to collapse
Gonna petition to get your screen-name swithched to " musclebrain" LOL
your all over this forum in a good way.
one of the many links to get your msl the easy way
http://forum.xda-developers.com/showthread.php?t=689470
musclehead84 said:
Yes for 3g go into your dialer and hit ##3282# then edit. Put in your msl code. If you don't have it call sprint and ask for it. Then hit other then multimedia. Change both proxy addresses to 0.0.0.0 and ports to 0
Sent From My Evo Killer!
Click to expand...
Click to collapse
If the ##data does not work, what do you suggest? Having tired several different ROMs my ##data has never worked unless I odin'd back to stock.
Thanks for the help. I actually do what u said everytime I reset my phone anyway , to get iheartradio to work. Didn't know it was helping all data though , thought it jus tmeant for apps dealing with multimedia data.
I swear, i've done it all. I've flashed the donor intercept's "numbers" if you get what i'm saying....
got my AAA and HA passwords,
got my username and all that info inputted in QPST, wrote to phone,
phone restarted.......
*me getting excited*
open dialer on epic to make a test call...
rings once and then "YOUR ACCOUNT COULD NOT BE VALIDATED!"
checked settings, rechecked settings,
is there some type of provisioning i have to do?
do i need to call customer service and "refresh" my data...
the intercept still works fine, too...
michael.hooboob said:
I swear, i've done it all. I've flashed the donor intercept's "numbers" if you get what i'm saying....
got my AAA and HA passwords,
got my username and all that info inputted in QPST, wrote to phone,
phone restarted.......
*me getting excited*
open dialer on epic to make a test call...
rings once and then "YOUR ACCOUNT COULD NOT BE VALIDATED!"
checked settings, rechecked settings,
is there some type of provisioning i have to do?
do i need to call customer service and "refresh" my data...
the intercept still works fine, too...
Click to expand...
Click to collapse
We are going to need more info then that. Your AAA and HA user name name and password have nothing to do with getting calling to work just data. Make sure you entered the correct meid in QXDM and that u also put in your phone number and mdn as well in qpst.
Sent from my SPH-D700 using XDA App
i got calling/texting to work, finally....
my msid was different than my actual phone number and i didn't realize that.
changed it in ##msl# and voila, calls and text!
now i just can't get that data working, i've manually entered all the usernames and such in ##data# but that didn't work.
so i went the route of using qpst, data still doesn't work.
weird quirk though is that it seems the settings in qpst aren't sticking maybe? i'll write the PPP box to phone and then when it boots i'll read it to make sure it's right, but it will be gone.
Additionally when i try to input the correct settings in the advanced tab on ##data# i cannot get them to save. I'll exit data programming mode and it will all just change back to <not set>.
that may have some problems with it.. i can try flashing a sprint rom again to reset the data settings to start fresh maybe?
again i appreciate any help you can give me because i've been working on this for damn near 4 days!!!!
edit: i've attached my list of important things to have while programming, most of which was pulled from data programming on intercept.
i trust that you won't try to steal any of my number and what not, if it's possible.
michael.hooboob said:
i got calling/texting to work, finally....
my msid was different than my actual phone number and i didn't realize that.
changed it in ##msl# and voila, calls and text!
now i just can't get that data working, i've manually entered all the usernames and such in ##data# but that didn't work.
so i went the route of using qpst, data still doesn't work.
weird quirk though is that it seems the settings in qpst aren't sticking maybe? i'll write the PPP box to phone and then when it boots i'll read it to make sure it's right, but it will be gone.
Additionally when i try to input the correct settings in the advanced tab on ##data# i cannot get them to save. I'll exit data programming mode and it will all just change back to .
that may have some problems with it.. i can try flashing a sprint rom again to reset the data settings to start fresh maybe?
again i appreciate any help you can give me because i've been working on this for damn near 4 days!!!!
edit: i've attached my list of important things to have while programming, most of which was pulled from data programming on intercept.
i trust that you won't try to steal any of my number and what not, if it's possible.
Click to expand...
Click to collapse
First of all delete that!!!
And secondly try to use dfs cdma instead of qpst.
Edit: looks like u Xed out the important stuff.
Sent from my SPH-D700 using XDA App
I always re-input all qpst data, including passwords, each time I use it to avoid possible data corruption, as well as going to ##DATA# and viewing the starred passwords there.
Sent from my SPH-D700 using xda premium
i'll give it a try now,
another weird thing i found is that if you want your AAA password just open up ##data# on the intercept and click on the password like you're editing it, long press it and hit select all, and then turn the phone sideways like landscape mode and you can see the passwords in plain text! that's how i got mine anyways... seemed easier than reading through the adb log.
edit: TO BE CLEAR that way of getting the AAA password ONLY works on the intercept running 2.2 STOCK. It may or may not work for you, if it works for you then we can probably assume it will work for others who have problems with adb like me.
michael.hooboob said:
i'll give it a try now,
another weird thing i found is that if you want your AAA password just open up ##data# on the intercept and click on the password like you're editing it, long press it and hit select all, and then turn the phone sideways like landscape mode and you can see the passwords in plain text! that's how i got mine anyways... seemed easier than reading through the adb log.
edit: TO BE CLEAR that way of getting the AAA password ONLY works on the intercept running 2.2 STOCK. It may or may not work for you, if it works for you then we can probably assume it will work for others who have problems with adb like me.
Click to expand...
Click to collapse
That's good info for someone on a intercept. I just went ahead and stuck with the adb log method to blanket cover all who may not be using an intercept phone.
Sent from my SPH-M910 using xda premium
okay, so i tried reflashing all settings for my data to work, but i still can't even get 1x......
my settings are IDENTICAL to this guy's -- http://forum.xda-developers.com/showpost.php?p=23117907&postcount=281
a little stumped to be honest, any ideas?
Okay, so if i change my data username in ##DATA# to [email protected] i can get 3g to flash on/off intermittently and i can get steady 1x. problem is that the icon is there but there but i can't actually go to any websites. i'll open the browser and the arrows will light up like it wants to work but no.
if i change it back to mdata.vmobl.com i lose the 1x icon and 3g and back to nothing...
i dont get it....
michael.hooboob said:
Okay, so if i change my data username in ##DATA# to [email protected] i can get 3g to flash on/off intermittently and i can get steady 1x. problem is that the icon is there but there but i can't actually go to any websites. i'll open the browser and the arrows will light up like it wants to work but no.
if i change it back to mdata.vmobl.com i lose the 1x icon and 3g and back to nothing...
i dont get it....
Click to expand...
Click to collapse
#1. Follow the tutorial.
You'll notice you're suppose to program it with software, not just trying to enter at ##DATA#
Sent from my SPH-D700 using xda premium
Shinydude100 said:
#1. Follow the tutorial.
You'll notice you're suppose to program it with software, not just trying to enter at ##DATA#
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Lol I feel like if people just followed the tutorial they would have 0 problems. Once u get all the needed keys and what not the epic is a breeze to flash.
Sent from my SPH-D700 using XDA
I did the tutorial exactly, but my data wouldn't work. So I tried manually in ##data#.
Is there a way I can just start over fresh?
michael.hooboob said:
I did the tutorial exactly, but my data wouldn't work. So I tried manually in ##data#.
Is there a way I can just start over fresh?
Click to expand...
Click to collapse
Start over fresh? Why Certainly! Odin EL30 Stock Tar. Have Repartition checked and make sure you have efs clear selected as well.
WARNING!!!! EFS clear is going to wipe that phone clean, you'll have to re-input the ESN (I think) and prl, etc. Least that's what I believed happened to me last time I did an efs clear.
Sent from my SPH-D700 using xda premium
i will do that once i am off work!
you guys are a lot of help, and i appreciate it.
i just want to start off fresh because i was about half asleep when i entered all the numbers in and i'm about 99.5% positive i funked up a number somewhere that shouldn't have been effed with.... i'll let you know if it works!
well! reflashing to stock fixed my problems.
followed your guide and entered all the settings verbatim.
the 3g icon is up, data is working .....very slowly.
this leads me to believe that it's not actually 3g and just 1x.
according to mobile speed test i'm going at about dial up speeds (not even 1x) with 3 bars of service.
any idea??
got it!
it just fixed itself when i cycled data mode on and off, thanks guys!
getting solid 1 mbps downloads with half that for uploads in my area of NE!
So I bought this phone used off of EBay and I have nTelos for a carrier (not sprint). I don't have much issue with the phone except that I can't change the @sprintpcs.com username that shows up in the ## whatever-it-is # settings. I think this is what's causing the constant "unable to connect to sprint data invalid username/password" errors. I can post more exact details on the error message if someone needs it. I think it's something like error 67.
Sent from my SPH-D710 using XDA
You think your getting that error maybe cause you don't have an active account with Sprint???
I could be wrong but ...
Sent From My Galaxy Class StarFighter
Thank you trying to help. I thought it would be obvious by the title that I don't have an active sprint plan because IM not with sprint as a carrier.
is there any way to get rid of the error 67 without signing up for sprint?
Sent from my SPH-D710 using XDA
feyrune said:
So I bought this phone used off of EBay and I have nTelos for a carrier (not sprint). I don't have much issue with the phone except that I can't change the @sprintpcs.com username that shows up in the ## whatever-it-is # settings. I think this is what's causing the constant "unable to connect to sprint data invalid username/password" errors. I can post more exact details on the error message if someone needs it. I think it's something like error 67.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Well you haven't mentioned how you got it on nTelos in the first place. Do you have just voice working or voice and data?
Error 67 is a (data) provisioning error message.
The @sprintpcs.com username you're seeing is the previous Sprint user's provisioned username for Sprint's 3G network. It's easy to remove/edit that entry if that's all that's bothering you. You'll need the MSL or SPC and ##3282# in EPST.
Thank you
I did go into data provisioning and change the username (used some info from mom's stock Samsung gem), but im still getting the error 67.
I have had voice and data working on nTelos (took to nTelos store to originally have them switch it over) but still get the popup errors (usually when it starts up from reboot).
I also still haven't been able to get mms to send either (using stock messaging app).
Is it safe to use ##72796# if IM not on sprint? Or is that a sprint-only thing? I've seen it in a bunch of threads but they all had sprint too.
Sent from my SPH-D710 using XDA
##72796# SCRTN (Factory default value for DSA selection) normally will reset to default (Sprint) values, so probably not a good idea. Not sure really though...
Wasn't able to find much on nTelos but I'd check to see if they support the hands-free activation. My MVNO does and they just register it in their system by MEID - the hands-free activation pulls the rest down. If so, it's just a matter of clearing the data (I believe ##786#) and letting it pull again.
Keep in mind that I haven't tried this before so I would let someone else either confirm or correct this post if needed. In this case it wouldn't hurt to get another opinion.
Use QPST to edit the data profiles.
Sent from my SPH-D710 using Tapatalk 2
I have read through the entire thread at http://forum.xda-developers.com/showthread.php?t=1696621 which has helped me a lot. I noticed not suppose to ask help on that thread so I figured I start one here and you may delete my post I made on that thread.
I have a Verizon Nexus SCH-i515 I would like to get working on PagePlus. I currently have talk/text working, but no 3g. I have Verizon Paranoid Android rom, sprint FC12 CDMA radio. Using PRL 52874 provided OTA *22800.
I tried using the script for ets that AutoPrime provided on the mentioned thread above, but I do not know the HA, AAA, or Akey. I do not know how to obtain these settings. I'm assuming this is why I can't get 3g working.
I have a Droid RAZR Maxx flashed to PagePlus and I didn't need any of these settings. It was basically ##PROGRAM, set MDN, MIN, and SID, then use CDMA workshop or DFS, set EVDO to rev.a, and disable R-UIM by setting to NV only.. power on, *#*#INFO#*#* change to CDMA Auto (PRL), done.. so I don't know how to get these AAA,HA, or akey from.
Reading around some people are getting these settings from donors, but I don't have an actual PagePlus phone. If anyone can help me I'd be very happy and greatly appreciated.
Back to reading the mentioned thread above for the 5th time, see if I missed something. Thanks!
OK, seems everything I read says I need a donor phone. Can anyone tell me why I didn't need this when putting razr on page plus? Did it get all the info ota? Guess I'll have to dig up my LG dare to use as a donor, if I can.
Is it possible to swap razr and nexus esn, get the info then swap back?
AAA, HA, Akey backup??
Ok, swapped phones, now I need to find how to get Akey, AAA, and HA from the Verizon RAZR maxx... in DFS > programming > general > cave > get reports A_Key cps-error bad-param
ssd-a cps-error bad-param
ssd-b cps-error bad-param
Now under DFS > NV > read
I get 466, 580, 889, 906, 920,1192 cps-error bad-param
So this phone has 3g and works but no akey, aaa, or ha?
Is there a way to record a log of an ota on the razr maxx to get HA AAA and akey?
Also is there a way to log the nexus trying to connect to see the error message?
Razr keys
Stop trying to get the keys from the Razr; they won't help. The only AAA and HA etc. info. that will help you is that of a phone that has been activated with working 3G on Page Plus. The Razr is most likely locked up (as for the NV items), so if you think you need the 3G data, go for a cheap, easily accessible phone (LG Vortex, pretty much any Samsung, etc.).
I can live with 1x on Page Plus with my Gnex, but I don't use data that much. You get very little data on PP anyway.
Use Autoprime's script for P+, then go in and use "NV Manager" with ETS (just to be super sure everything is as it should be--I think the script put my MDN where my MSID should be actually). This got me 1x, talk and text.
I'm happy.
God Bless!
K4J98 said:
Stop trying to get the keys from the Razr; they won't help. The only AAA and HA etc. info. that will help you is that of a phone that has been activated with working 3G on Page Plus. The Razr is most likely locked up (as for the NV items), so if you think you need the 3G data, go for a cheap, easily accessible phone (LG Vortex, pretty much any Samsung, etc.).
I can live with 1x on Page Plus with my Gnex, but I don't use data that much. You get very little data on PP anyway.
Use Autoprime's script for P+, then go in and use "NV Manager" with ETS (just to be super sure everything is as it should be--I think the script put my MDN where my MSID should be actually). This got me 1x, talk and text.
I'm happy.
God Bless!
Click to expand...
Click to collapse
My RAZR maxx is on page plus with full working 3g,talk,text.. that's why I thought it would work if I swapped gnex esn to the razr, activated it, then tried to get HA/AAA then switch back.. but couldn't get them.. Did you use a donor to get 1x? What radios, rom, and prl are you using? The script for P+ requires HA/AAA ,well could be blocked off with /// but thought these were needed.
I do have a Verizon LG Dare somewhere if I can find it, could use it as a donor. Problem is finding it.
HA AAA passwords no donor
Well I've been changing so many settings that probably never needed changed. Going through every setting in ets seeing what does what. After changing some settings and pulling down some OTA via *22800 I have been able to get HA and AAA passwords without a donor. I still have no 3g data though.
Plugging phone number, HA, and AAA into AutoPrime's ets script still does not get me 1x or 3g data on pageplus. So there is still something missing on his script, something wrong on script, or maybe my phone is just glitched.
I did read somewhere that Nexus on pageplus should use profile 0, I noticed in AutoPrime's script he changes profile 1 settings. Maybe I'll try changing these around or something.
urhaxable said:
Well I've been changing so many settings that probably never needed changed. Going through every setting in ets seeing what does what. After changing some settings and pulling down some OTA via *22800 I have been able to get HA and AAA passwords without a donor. I still have no 3g data though.
Plugging phone number, HA, and AAA into AutoPrime's ets script still does not get me 1x or 3g data on pageplus. So there is still something missing on his script, something wrong on script, or maybe my phone is just glitched.
I did read somewhere that Nexus on pageplus should use profile 0, I noticed in AutoPrime's script he changes profile 1 settings. Maybe I'll try changing these around or something.
Click to expand...
Click to collapse
try flashing a radio thats actually for your phone if it will even work anymore after flashing one not intended for it.
I can flash Verizon radio but its not programmable. Will settings stay? Ill try that I just wrote all values to profile 0 and 1.. set 0 active no data, set 1 active no data..
My ha pass is only 9... script says 16.. should I add some 0's to the end to make it 16?
Watching this thread closely. I have a gnex I'm trying to get on page plus with 3g.
Sent from my SCH-I500 using Tapatalk 2
HA AAA passwords no donor
As I thought tossed on Verizon radio, settings reverted back to what SIM was programmed for. So I tossed in a blank SIM, mdn, min, etc all 0's and not changable.. so tossing Sprint radio back on unless someone knows of a Verizon radio that will accept changes.
urhaxable said:
Well I've been changing so many settings that probably never needed changed. Going through every setting in ets seeing what does what. After changing some settings and pulling down some OTA via *22800 I have been able to get HA and AAA passwords without a donor. I still have no 3g data though.
Plugging phone number, HA, and AAA into AutoPrime's ets script still does not get me 1x or 3g data on pageplus. So there is still something missing on his script, something wrong on script, or maybe my phone is just glitched.
I did read somewhere that Nexus on pageplus should use profile 0, I noticed in AutoPrime's script he changes profile 1 settings. Maybe I'll try changing these around or something.
Click to expand...
Click to collapse
How long and difficult is this process? I'm mulling over whether I'm gonna pay someone to do this or not. Romming is one thing but this flashing might be over my head.
Sent from my SCH-I500 using Tapatalk 2
94SupraTT said:
How long and difficult is this process? I'm mulling over whether I'm gonna pay someone to do this or not. Romming is one thing but this flashing might be over my head.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Well if there was a guide it'd be pretty easy, but with no guide and over thousands of setting combinations, I'm just doing trial and error..
I don't think anyone at all has a Nexus on pageplus fully working.. Using a donor or not.. No one has said anything in any of the forums I read or youtube, so guessing that no one has it working. Guy above says he has 1x on pageplus, but I can't even get that, and I think he is the only one. All I have is talk/text working flawless..
There has been about 2 people that say they have the Nexus fully flashed to cricket.. but I have not attempted that as I'd rather have pageplus. If I can't get pageplus I may look into cricket and compare their speedtests with virgin mobile and flash to one of them. I have donors for VM.
I
urhaxable said:
Well if there was a guide it'd be pretty easy, but with no guide and over thousands of setting combinations, I'm just doing trial and error..
I don't think anyone at all has a Nexus on pageplus fully working.. Using a donor or not.. No one has said anything in any of the forums I read or youtube, so guessing that no one has it working. Guy above says he has 1x on pageplus, but I can't even get that, and I think he is the only one. All I have is talk/text working flawless..
There has been about 2 people that say they have the Nexus fully flashed to cricket.. but I have not attempted that as I'd rather have pageplus. If I can't get pageplus I may look into cricket and compare their speedtests with virgin mobile and flash to one of them. I have donors for VM.
Click to expand...
Click to collapse
Gotcha. I just picked up a Sprint Gnex, literally minutes ago,lol. It was 125, so i couldn't pass it up. From what i gather it is easier than the verizon gnex.
Sent from my SCH-I500 using Tapatalk 2
94SupraTT said:
I
Gotcha. I just picked up a Sprint Gnex, literally minutes ago,lol. It was 125, so i couldn't pass it up. From what i gather it is easier than the verizon gnex.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Yeah Sprint Nexus is a little easier as you don't have to worry about radios, your stock radios allow programming. And since you are already Sprint you don't need to flash a sprint rom to access some on phone programming menus.
alphahere has a Sprint GNex fully working on Page Plus. These are the steps he took to get it working.
alphahere said:
1) Had a donor phone - HTC incredible, cloned all values needed to the Sprint Galaxy Nexus.
2) Modified the verizon script using the values from the HCT incredible.
3) Ran the script with ETS
4) Lastly did over the air programming with verizon (pageplus).
5) Modified the APN to work for verizon mms.
Click to expand...
Click to collapse
I suspect you are having the same problem I'm having. I just flashed a Sprint GNex to Page Plus a few days ago. However 3G data is not working because I used a Droid X as the donor and as I have learned in the last couple of days Motorola has their phones locked up pretty tight. I'm unable to pull the NV items needed to obtain the HA/AAA/PPP keys.
In the next few days I'm going to try and find a cheap LG or Samsung phone and use that as the donor instead.
---------- Post added at 01:44 PM ---------- Previous post was at 01:38 PM ----------
urhaxable said:
Well I've been changing so many settings that probably never needed changed. Going through every setting in ets seeing what does what. After changing some settings and pulling down some OTA via *22800 I have been able to get HA and AAA passwords without a donor. I still have no 3g data though.
Plugging phone number, HA, and AAA into AutoPrime's ets script still does not get me 1x or 3g data on pageplus. So there is still something missing on his script, something wrong on script, or maybe my phone is just glitched.
I did read somewhere that Nexus on pageplus should use profile 0, I noticed in AutoPrime's script he changes profile 1 settings. Maybe I'll try changing these around or something.
Click to expand...
Click to collapse
If you are using a Verizon ROM there's a patch you need to apply. Check this post.
On a scale of 1 to 10 with romming/rooting being a five what would you guys rate flashing a Sprint gnex to page plus.
Sent from my SCH-I500 using Tapatalk 2
94SupraTT said:
On a scale of 1 to 10 with romming/rooting being a five what would you guys rate flashing a Sprint gnex to page plus.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
On the GNex romming/rooting is a 1. Flashing a Sprint GNex is a 5 (autoprime's ETS instructions and scripts make it easy) and pulling the data you need from a donor phone can be a 5-10 depending on which phone you use as the donor.
Once you go through the process once though it's pretty easy.
silow said:
On the GNex romming/rooting is a 1. Flashing a Sprint GNex is a 5 (autoprime's ETS instructions and scripts make it easy) and pulling the data you need from a donor phone can be a 5-10 depending on which phone you use as the donor.
Once you go through the process once though it's pretty easy.
Click to expand...
Click to collapse
Sweet. I might give it a try. Will me Samsung Fascinate work as a donor for my Sprint gnex?
Sent from my SCH-I500 using Tapatalk 2
94SupraTT said:
Sweet. I might give it a try. Will me Samsung Fascinate work as a donor for my Sprint gnex?
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
I would anticipate the Fascinate to be pretty easy to use with CDMA Workshop/QPST/QXDM. As long as you stay away from Motorola...