Related
Ok this has been done to death I know but I can seem to find the thread that allowed us to make sure the bluetooth never goes to sleep. its a reg hack and I lost it anyone know where its is or maybe what the string is?
this is the best resource on the web for the pocket PC devices by far all the others are a joke. I have recomended this site to several people in the past month so I hope we can keep growing
Thanks all
Dekum
I use a small software (attached). I also don't remember of a reg hack.
Has anyone figured out how to get GPS working with Verizon again? I Have a xv6900 running NFSFAN's verizon Custom WM6.1 1.14 and I'm not sure what to do.
I have read through this thread http://forum.ppcgeeks.com/showthread.php?t=61493 but I still haven't found a solution.
inthenickoftime4 said:
Has anyone figured out how to get GPS working with Verizon again? I Have a xv6900 running NFSFAN's verizon Custom WM6.1 1.14 and I'm not sure what to do.
I have read through this thread http://forum.ppcgeeks.com/showthread.php?t=61493 but I still haven't found a solution.
Click to expand...
Click to collapse
The problem appears to be that Verizon is authenticating their aGPS server and if your phone is not valid for aGPS support the 'fix' will no longer work. There a rumors about that Veriosn may offer aGPS support for a fee in the near future because some of their new models are supposed to unlock aGPS first quarter 2009.
What has worked for many is to use the TELUS aGPS server. To do this use QPST like for the original fix, but use the following assignments:
IP: 216.198.139.92
PORT: 8889
Not as fast as the Verizon, but I get locks in about 30 seconds.
Hope this helps.
VZYGuy said:
The problem appears to be that Verizon is authenticating their aGPS server and if your phone is not valid for aGPS support the 'fix' will no longer work. There a rumors about that Veriosn may offer aGPS support for a fee in the near future because some of their new models are supposed to unlock aGPS first quarter 2009.
What has worked for many is to use the TELUS aGPS server. To do this use QPST like for the original fix, but use the following assignments:
IP: 216.198.139.92
PORT: 8889
Not as fast as the Verizon, but I get locks in about 30 seconds.
Hope this helps.
Click to expand...
Click to collapse
Thanks a lot, I'll give that a try. I have been lost without GPS. (excuse the pun)
Do I have to change anything in the registry?
inthenickoftime4 said:
Thanks a lot, I'll give that a try. I have been lost without GPS. (excuse the pun)
Do I have to change anything in the registry?
Click to expand...
Click to collapse
Here is a post that may have all the fixes and settings you need http://forum.ppcgeeks.com/showpost.php?p=801450&postcount=130
I took the liberty of just doing a copy/paste of the details for you here as well but you can hit the link for more updates and details on your own
plus the arcsoft MMS cab is over there if you need that to download as well
Detroit Doug
*****************************************
HOW TO FOR VZW USERS
This will be updated as I discover more.
This has all been done using the clean rom as I had many issues with the other.
What worked on a fresh flash
1. Voice
2. Data
3. SMS
4. All hardware
GPS
1. This is assuming you have already done the agps hack
2. Dial *228 and choose option 1
3. Soft reset the phone
4. Open your favorite gps app and you should have a lock within 30 seconds.
(if that does not work make sure you have location on in the phone settings. Also make sure that under gps settings you have the baud rate set to 4800 and the com port set to 4)
If it still does not work check the following reg settings
[HKLM\Software\HTC\SUPL GPS]
\EnableAGPS = 1
\EnableSmartMode = 1
\GPSMode = 4 (should also work as 2)
\NumberFixes = 999999999
\QoSAccuracy = 50
\QoSPerformance = 89
\ServerIP = 195.207.101.126
\ServerPort = 7788
\timeBetweenFixes = 1
MMS
1. Go to connection settings and select "Manage existing connections"
2. edit the only connection there
3. Name it whatever you want ie "vzw"
4. hit next and enter #777 as the number
5. hit next and put "[email protected]" and "vzw" as the password
6. hit finish
7. install the attached arcsoft cab
8. do a soft reset.
9. open phmregedit in the start menu
10. navigate to HKLM\Software\Arcsoft\ArcsoftMMS UA\Config\mm1\WspHeader\X-VzW-MDN and put your 10 digit phone number for the value
11. wait a min or two and do a soft reset
12. go into messaging select menu and then mms options
13. select the server tab
14. select verizon wireless and change connect via to "the internet", the other settings should be correct.
15. wait a few min and perform a soft reset once more
16. now mms should work!!!
Not sure what the deal is with the GPS's not working. Mine has not stopped working. I attempted the aGPS fix in the beginning but it would not work for. I am running NFSFAN's ROM & my GPS is working without an issue. Granted I unlocked my phone with 2.31 before upgrading to VZW's 6.1 ROM & never let the customizations run.
This guy has the right idea here ---> http://forum.ppcgeeks.com/showthread.php?t=36377
I had been searching for WEEKS.. I'm freshly in my NFS6.5 V7 with no customizations ran other than NFS's, I went and did what the guy said at ppc geeks, except I didn't install the gps registry cab he tells you to..
In both QPST and the registry [HKEY_LOCAL_MACHINE\SOFTWARE\HTC\SUPL AGPS] I did this
PDE IP Address = 66.174.95.132
PDE Port Number = 8888
(Only QPST)PDE Transport = IP
(Only QPST)Position Calculation = mobile
with GPSMode: 4
**** works beautifully..
in google maps i DONT let it automatically find GPS, i put it to com4 4800..
i get about 5-6 active, occasionally going upwards around 7-8 but no more, works for me
although im currently looking for another gps program to use, google maps isnt bad but i wanna see if theres better free ones out there, if anyone has suggestions please let me know
I take it back it worked for about 4 hours and now no longer locks, in google maps it'll say "seeking GPS satellite (479001920).." and sometimes cut down to "seeking GPS satellites (5).." and go back and forth quickly.. at first when i got it working it would lock in on the 5 after like 10 seconds, now no luck
to bad, hopefully it comes around on its own lol.. or ill try a few changes now that i have a basis
edit: NEVERMIND.. had the problem for about 30-40 minutes (which lead to me posting to let anyone who might read what i did know the same might happen to them) and now it started to work again on its own just fine
GPS on verizon
I want to know if the GPS will use data or not, my phone has a data block and I still have the WM6.1 original rom. I was thinking to the what the last post did but it shows that it edits ip address.
Is there a way to keep the rom but use the gps without using data?
s.lanso said:
I want to know if the GPS will use data or not, my phone has a data block and I still have the WM6.1 original rom. I was thinking to the what the last post did but it shows that it edits ip address.
Is there a way to keep the rom but use the gps without using data?
Click to expand...
Click to collapse
I dont think it uses Data because from what i remember there were some people using the GPS feature with a Data Block
I'm seeing satellites (red bars) when I open mGpsCmd but I'm unable to get a lock (blue bars). Any ideas why I'm unable to get a lock?
mdjkim said:
I'm seeing satellites (red bars) when I open mGpsCmd but I'm unable to get a lock (blue bars). Any ideas why I'm unable to get a lock?
Click to expand...
Click to collapse
You are no the only having difficulties but I have run out of ideas.
The only thing that I can offer is look at the registry settings.
HKEY_LOCAL_MACHINE ----SOFTWARE ----> HTC ----> SUPL AGPS
EnableGPS = 1
GPSMode =2 I have changed this to a 4 & been able to lock.
You can try tweaking these & see if it helps. If you are able to get a lock change them back. It usually takes the longest to obtain the first lock. Some people have experienced in excess of 15 minutes.
jadesse said:
You are no the only having difficulties but I have run out of ideas.
The only thing that I can offer is look at the registry settings.
HKEY_LOCAL_MACHINE ----SOFTWARE ----> HTC ----> SUPL AGPS
EnableGPS = 1
GPSMode =2 I have changed this to a 4 & been able to lock.
You can try tweaking these & see if it helps. If you are able to get a lock change them back. It usually takes the longest to obtain the first lock. Some people have experienced in excess of 15 minutes.
Click to expand...
Click to collapse
I searching for GPS and have found it difficult to "sift" out the aGPS mixed in with the GPS... and of course, that is what determines whether a data connection is required. I have the Data Block and want to only use the Satelites.
So my questions....
In my registry the above location lists only
EnableAGPS = 1
not
EnableGPS = 1
Do I need to edit out the A in AGPS to read only GPS?
Do I need both entries?
If both should I change "EnableAGPS = 1" to the value 0?
I will keep "sifting", but if anyone can answer the above or point to a thread where the posts are purely about "GPS" without aGPS mixed in, I would REALLY appreciate the answers or link
In order to use the GPS with no data, set the following:
\EnableAGPS = 0
\EnableSmartMode = 0
\GPSMode = 0
With these settings you will only use the sats. Warning: That first lock may take a long time.
Mike
golfnz34me said:
In order to use the GPS with no data, set the following:
\EnableAGPS = 0
\EnableSmartMode = 0
\GPSMode = 0
With these settings you will only use the sats. Warning: That first lock may take a long time.
Mike
Click to expand...
Click to collapse
Thanks for the reply.
I may still be confused with all that has happened since the Touch/Vogue came out...(I have actually read too much and hacked too little so far) I am a new owner, and so I am wondering how many of the early posted problems were eliminated now that WinMo6.1 comes standard instead of an upgrade, as well as having an updated radio 3.37.78.
In my reading people are posting that this radio works for accessing GPS (though they may actually be reporting success with aGPS)... but do I still need to use the coke unlocker? or is this only for ROM flashing? Also if I flash one of NFSFANS ROMs will this "fix" any GPS setting problems I may or may not have?
My apologies for any noobiness, I tried to pay my dues searching but... not all the threads are clean nor all the post clear. (nothing new in the forum world)
Edit
Answers to my questions^^^
coke unlocker has to be used activate GPS radio
Radio 3.37.78 works fine for GPS
NFSFANs ROMs are built for Vogues with active GPS radios.
I apologize if this is not where this thread belongs, but I wasn,t sure where exactly I should put it. Anyway, I use the ics on my touch pro, and have been off and on for about a month, without issue. I used the registry editor and renamed the forcedcell value or whatever its called so i can do it without paying for phone as modem. Well, I had to hard reset my pro b/c it was having some issues, so i set it up again. I just renamed the forcecell item, and now it disconnects all the time, and its slower. i will be on for awhile and i'll get the error 67 registration error, have to disconnect from my laptop, reload the browser page on my phone, and connect again.
the only thing different from b4 is that this time, i read that i should also go to HKEY LOCAL MACHINE-Softwar-OEM-WModem and set all values to 0 ( check prfile (which is 0 by default), and multi-nai and wmodem dun, which are 1 by default). this is supposedly so sprint cant detect i'm using my phone as a modem.
i also installed wmwifi router, and it works, but also disconnects and reconnects a lot.
I'm not sure why it does this, any ideas?
C'mon smart guys. Can anyone help a guy out? lol
Try this cab, it worked for me.
I'll give it a shot. Is it just aimed at making it stay connected?
My problem before this fix was that I would change the registry keys to connect but for some reason the phone would revert back to the old settings not allowing me to stay connected. It would be a random thing and going back to change them was getting old. After installing this cab, the settings would stick and I have not changed them since. So ....yes.
As some devs are aware there are those of us who need 3G disabled on Android for our devices. Using the option to "Only Use 2G Networks" does not resolve this. (edit: also, neither does the *#*#INFO#*#*)
I thought it might be helpful to create a thread about it so that if anyone comes up with a solution or if a particular rom build can address this issue (I'm not an expert but it seems like it will have to be a rom based fix? which is why this isn't in software development) there's a place for it.
I use AT&T and have validated my APN settings and tried all manner of selecting the "use only 2g" option (restarting, manually selecting networks, automatically selecting networks, etc.) but it always goes back to 3G.
This can be disabled as if I disable 3G through WinMO it works and HaRET seems to behave when I use it that way (I still select 2g only though).
Personally I use HardSPL 3.56 and Radio 1.71.09.01.
Please help us out Perhaps we could start a bounty -- I'd like to start with $10 for a validated fix.
If someone would be willing to walk me through a build process for their rom perhaps I can test/fumble through C myself and create a "patch" or something that can be applied to other builds. Please feel free to PM me if you can do that and I'll keep any information on this thread.
Thanks for reading this and any help you can provide or direction you can point me in! This is a great community!
---------------- UPDATES -----------------
As reported by Softec 2G/3G switching is working for Polaris (Pola100) using KaiserDroid 2.0
http://www.homecncfun.com/kaiserdroid/
Thank you slm4996!
I am trying to use KaiserDroid 2.0 on my Kaiser (Kais160) but thus far haven't gotten data to work. Stay tuned.
Hi
Thanks for starting this thread I am using the same phone (kaiser 130) same hard spl 3.34 and same radio.
I too live in an area where I need to disable 3g to have a usable phone, and have found the same - disable in Windows Mobile and load via haret and then android never tries 3g.
I like the idea of the reward, I'll match your $10 so that makes a $20 bounty on this one, I can test for anyone if they're trying to fix it.
There's a few different ways to accomplish this. All do the same thing but some may be easier for you to do based on your experience. I don't know if the ROMs need to be rooted but given that these are ports you should have no issues with that. You can search through my posts, the various threads or PM me if you need help with that.
Basically you are going to corrupt the (going off of memory here) /etc/apn-config.xml file to point to nonexistent APNs. You don't need to do both of these, these are just different ways to do this:
1.) Download Droidsans Tweaks Lite from Market (free) and you can use it to disable the APN, or you can just to to the APN settings and change the APN name
2.) Download APNdroid (free) and toggle connectivity
There's other ways, but giving you two options should be enough. If you are good enough at messing with ROMs, you can always just delete the apn-config.xml (or whatever it's called) in /etc (which is in the rootfs.img) and it will never connect.
I don't think these 2 actually turn off 3g just the data, my problem is the 3g signal is too weak to be reliable so I need to force 2g completely, not just disable the apn
then can't you just get one of the various (curvefish for example) widgets to toggle 2G/3G or go to settings and say 2G only?
Currently only via Haret
damianiw said:
I don't think these 2 actually turn off 3g just the data, my problem is the 3g signal is too weak to be reliable so I need to force 2g completely, not just disable the apn
Click to expand...
Click to collapse
Well the only thing I can suggest is via haret.
1. Via windows goto com manager and disable 3g, and confirm that you have edge showing and connected.
2. Boot haret and you will be limited to edge.
short and sweet.....
the speed is decent enough for me to consider a nexus or desire on ATT's 850 mhz HSDPA/4g
Mo
ps. I hope your thread pushes for a solution via nand b/c its important.
disable 3g not workkint in android
enatefox said:
then can't you just get one of the various (curvefish for example) widgets to toggle 2G/3G or go to settings and say 2G only?
Click to expand...
Click to collapse
Sorry n the dsiabling 3g when runing android does not work on the kaiser from our experience, the widget is just a shortcut to the menu.
As noted in post 7 and I tught above the only soluton is to run via haret and. Disable it in windows mobile to re-enable reboot the phone and enable in windows then run haret again.
Can we change the thread to - Android via Nand on Kaiser Disable 3g solution required or something clearer
I would love to be able to run via nand
I have this problem too, i can't disable the 3G signal, i think this problem is only in Kaiser.
i like if someone can "fix" this for us.
Thank you guys for the suggestions. HaRET does work if the WinMO ROM hosting can disable 3G (which most have a switch or something).
I have googled for some time searching for a toggle/switch that disables 3G but as mentioned have only found ones that point to the menu rather than actually disable 3G.
As mentioned the menu does not work.
There's a $20 combined bounty on this already! Please help us out!!
Newest KaiserDroid
I am using a new RIL in KaiserDroid 2.0, have you tried it yet?
http://www.homecncfun.com/kaiserdroid/
If it works I can backport it to older roms till this one is more complete. Thank you for all you feedback on the KaiserDroid thread.
I'll give it a try and let you know...
2G/3G switch is working for me on Polaris Pola100
i finally can use me phone with Android!!!
thanks, great work!
Softec said:
2G/3G switch is working for me on Polaris Pola100
i finally can use me phone with Android!!!
thanks, great work!
Click to expand...
Click to collapse
You're welcome. Do you want to keep using 2.0 or should I backport it for you?
Thus far with KaiserDroid 2.0 I haven't been able to get any data to work. I didn't test making/receiving phonecalls. I plan on posting thoroughly soon but I want to play with it some more (perhaps I've done something ignorant, haha )
I've been using HaRET to test and left my MicroSD at home today will have to try more later this evening. I will also check out KaiserDroid 1.1.
aikeru said:
Thus far with KaiserDroid 2.0 I haven't been able to get any data to work. I didn't test making/receiving phonecalls. I plan on posting thoroughly soon but I want to play with it some more (perhaps I've done something ignorant, haha )
I've been using HaRET to test and left my MicroSD at home today will have to try more later this evening. I will also check out KaiserDroid 1.1.
Click to expand...
Click to collapse
Try this update package, it fixes some of the APN's and adds a few more:
http://www.homecncfun.com/wp-content/plugins/download-monitor/download.php?id=15
(this is just an update, put it in your andboot folder and enter the install menu, choose "apply update" then quit)
slm4996 said:
Try this update package, it fixes some of the APN's and adds a few more:
http://www.homecncfun.com/wp-content/plugins/download-monitor/download.php?id=15
(this is just an update, put it in your andboot folder and enter the install menu, choose "apply update" then quit)
Click to expand...
Click to collapse
Doesn't seem to work, my results/attempt procedure posted here (in KaiserDroid thread)
http://forum.xda-developers.com/showthread.php?p=5780033#post5780033
slm4996 said:
You're welcome. Do you want to keep using 2.0 or should I backport it for you?
Click to expand...
Click to collapse
Hello, it would be nice to have the opportunity to try different rom, can you tell us what to do if you would be very grateful.
For your rom I noticed that it is a bit slow, the data in WiFi will not work and above all the bateria takes very little.
Charged 100% no WiFi and only a few calls, it was switched off after 6 hours.
I tried the version 2.0, now I have downloaded version 2.1. Test and let you know.
Thank you very much.
Softec said:
Hello, it would be nice to have the opportunity to try different rom, can you tell us what to do if you would be very grateful.
For your rom I noticed that it is a bit slow, the data in WiFi will not work and above all the bateria takes very little.
Charged 100% no WiFi and only a few calls, it was switched off after 6 hours.
I tried the version 2.0, now I have downloaded version 2.1. Test and let you know.
Thank you very much.
Click to expand...
Click to collapse
Please read the thread for the rom you use!! These are all known issues with all ROMs flashed to NAND and to some extent under HaRET. the appropriate fixes and/or workaround have been posted in the thread. I am working a howto to back port the RIL but if you start poking around in the sysinit.rc it should be fairly obvious what files you need.
keep in mind that KaiserDroid 2.0/2.1 are ALPHA release and as such contain bugs.
Hello slm4996, it was not my intension held high controversy, I just wanted to clear up why do not I was using your rom and use the 3G off on another rom.
I looked at the file sysinit.rc as you recommended and I changed the line:
service ril-daemon /system/bin/rild -l /system/lib/libhtcgeneric-ril.so -- -d /dev/smd0
with
service ril-daemon /system/bin/rild
Then I replaced the file /system/bin/Rild from your new rom and it worked perfectly.
I can make and receive calls on 2G without problem. I have not tried the APN but I'll try to short
thank you very much.
So out of the blue this started happening, been for months on the same firmware and rom (1.32.401.17 and Viper 1.9.1, and no, I don't want to update, being on this firmware and rom can't be the cause is it worked flawless for quite some months already).
A few weeks ago it started for the first time, when I noticed my whatsapp messages not being send while not even 1 second ago they did.. Took about 30 seconds before they got sent. Now during this time, WiFi was still connected, but somehow data didn't get sent over it, more or less like it was stuck in limbo..
So I started checking other apps, and during those periods (that come and go every xx min) they didn't had any connection either.
After that I checked my other devices that are on wireless (iPad, 2 more smartphones and laptop), but they all seemed to be just fine, so it wasn't the network itself.
It does happen on both the 2.4 and 5GHz bands, sometimes it doesn't happen for quite some time and then suddenly nonstop with a few min in between. Disconnecting and reconnecting to the WiFi instantly fixes it though.
Now is there somewhat I can log this happening? Does Logcat help in this case? Would something be in the logs if I could snapshot the right moment? Or are there any proper tools I can monitor and log the WiFi connection with on my phone to get a better overview how often and how long these periods happen.
I have a feeling that maybe the WiFi chip is broken? Could the heat affect this and cause it to malfunction after some time? (Since I do notice it happening more often the longer I've been using the phone for that time)
If the chip was bust you'd have no wifi at all.
The problem will be in your configuration of network settings. Try rebooting your network to make sure the NAT is working correctly and make sure that your devices can see the gateway as a dns server, also use an isp dns as dns2.
It seems to me like its timing out on the ip "rental" or it's struggling to find a dns.
I wish I stole my HTC M9. It's a pile of ****.
Nah it's defo not the network, otherwise all other devices would be affected too (as I've said above already).
The router is a proper one, not some cheap €25, but the ASUS RT-N66U Dark Knight...
Anyway, tried to run logcat when it happened.
This is what stood out when it happened (though I could upload the full log if someone is actually interested in helping me.....)
Code:
09-10 02:27:19.540 D/WifiDataStallTracker(1304): updateDataStallInfo: mDataStallTxRxSum={txSum=359823 rxSum=497417} preTxRxSum={txSum=359822 rxSum=497417}
09-10 02:27:19.540 D/WifiDataStallTracker(1304): updateDataStallInfo: OUT sent=1 mSentSinceLastRecv=5
09-10 02:27:19.540 D/WifiDataStallTracker(1304): datastall detect!!
09-10 02:27:19.540 D/WifiDataStallTracker(1304): datastall detect when RSSI is -54
09-10 02:27:19.540 D/WifiDataStallTracker(1304): datastall detect when FREQ is 5240
09-10 02:27:19.540 D/WifiDataStallTracker(1304): datastall detect, ping gateway first
09-10 02:27:19.540 D/WifiDataStallTracker(1304): gateway IP: 192.168.1.1
09-10 02:27:20.600 D/WifiDataStallTracker(1304): ping gateway pass, don't do recover
Logcat will only show you what is happening at the device. If it's a network error you won't see anything out of the ordinary.
Fyi.. All home routers are cheap. Just because you pay a few quid more doesn't mean the device is more reliable. If you want a reliable system you pay thousands for a router from a business setup that has protection from every day faults like NAT errors, unreachable dns etc.
If only one device is affected it could be network OR device. I'd only blame my device if I'd knowingly messed with the wifi or radio etc.. Otherwise it'll be the router.
I wish I stole my HTC M9. It's a pile of ****.
Info
sausje85 said:
Nah it's defo not the network, otherwise all other devices would be affected too (as I've said above already).
The router is a proper one, not some cheap €25, but the ASUS RT-N66U Dark Knight...
Anyway, tried to run logcat when it happened.
This is what stood out when it happened (though I could upload the full log if someone is actually interested in helping me.....)
Code:
09-10 02:27:19.540 D/WifiDataStallTracker(1304): updateDataStallInfo: mDataStallTxRxSum={txSum=359823 rxSum=497417} preTxRxSum={txSum=359822 rxSum=497417}
09-10 02:27:19.540 D/WifiDataStallTracker(1304): updateDataStallInfo: OUT sent=1 mSentSinceLastRecv=5
09-10 02:27:19.540 D/WifiDataStallTracker(1304): datastall detect!!
09-10 02:27:19.540 D/WifiDataStallTracker(1304): datastall detect when RSSI is -54
09-10 02:27:19.540 D/WifiDataStallTracker(1304): datastall detect when FREQ is 5240
09-10 02:27:19.540 D/WifiDataStallTracker(1304): datastall detect, ping gateway first
09-10 02:27:19.540 D/WifiDataStallTracker(1304): gateway IP: 192.168.1.1
09-10 02:27:20.600 D/WifiDataStallTracker(1304): ping gateway pass, don't do recover
Click to expand...
Click to collapse
go to WiFi Setting > Advance > set Freq to 2.4GHz
also set your WiFi router to 2.4GHz
:good:
Geeks Empire said:
go to WiFi Setting > Advance > set Freq to 2.4GHz
also set your WiFi router to 2.4GHz
:good:
Click to expand...
Click to collapse
It's a dual router, so both are being send out at the same time.
Why would I use inferior 2.4 band anyway? There's like 15++ other 2.4 SSID's in my flat, only 2 other 5GHz,..
My recommendation.
So I've seen many different answers to what seemed to be the problem with the WiFi on my new M9. After connecting, data would throttle down to near nothing and occasionally come back, if only for a moment.
The fix was ridiculously simple, navigate to "Wifi Direct" under WiFi settings and rename the device in the submenu. After spending many hours tinkering with settings, reflashing, and almost returning the phone It was difficult to believe this was the difference that made the difference. I hope this helps someone and many, many thanks to the YouTube poster Rocky Xyzz to whom I cannot link yet due to my lurker status.
So after getting my phone back from repair, I've had to restore stock, update soft- and firmware, and put viper 3.5 on it. Now the exact same is happening again, this time with data though (and happening like every 30 seconds), WiFi is just fine and has no connection issues...
thans for sharing the solution, best regards!
LLegion said:
thans for sharing the solution, best regards!
Click to expand...
Click to collapse
If you meant that as sarcastic, I haven't found a solution at all, sooooooooooooo.........
sausje85 said:
If you meant that as sarcastic, I haven't found a solution at all, sooooooooooooo.........
Click to expand...
Click to collapse
dont misundertand me, not at all, reading some of the replis i though you have found solutions, im very sorry for the misunderstanding, i have nver had this isue at all and im runnig ViperOne 3.5.0 and works perfect....to your notes i have herad of some people with same issue in Mexico with Telcel carrier but no one has been able to provide a acurate solution......
If i were you, and this is my own humble prespective...i would first backup all my info and the place my phone underwater for 20 mins and ake use of the Uh-Oh warranty protection to replace my phone with no questions, one new phone replacement:
http://www.htc.com/us/uh-oh-protection/
LLegion said:
dont misundertand me, not at all, reading some of the replis i though you have found solutions, im very sorry for the misunderstanding, i have nver had this isue at all and im runnig ViperOne 3.5.0 and works perfect....to your notes i have herad of some people with same issue in Mexico with Telcel carrier but no one has been able to provide a acurate solution......
If i were you, and this is my own humble prespective...i would first backup all my info and the place my phone underwater for 20 mins and ake use of the Uh-Oh warranty protection to replace my phone with no questions, one new phone replacement:
http://www.htc.com/us/uh-oh-protection/
Click to expand...
Click to collapse
Ah ok, no I haven't yet. It just disappeared and now is happening to data suddenly (no matter what provider or network FYI).
We don't have the uh-oh protection here in Europe, so that's a no-go.
hominine said:
So I've seen many different answers to what seemed to be the problem with the WiFi on my new M9. After connecting, data would throttle down to near nothing and occasionally come back, if only for a moment.
The fix was ridiculously simple, navigate to "Wifi Direct" under WiFi settings and rename the device in the submenu. After spending many hours tinkering with settings, reflashing, and almost returning the phone It was difficult to believe this was the difference that made the difference. I hope this helps someone and many, many thanks to the YouTube poster Rocky Xyzz to whom I cannot link yet due to my lurker status.
Click to expand...
Click to collapse
I love you
Deathmeter said:
I love you
Click to expand...
Click to collapse
Glad it helped someone.
hominine said:
Glad it helped someone.
Click to expand...
Click to collapse
can you pm me the the dudes YouTube channel? couldn't find it myself
Deathmeter said:
can you pm me the the dudes YouTube channel? couldn't find it myself
Click to expand...
Click to collapse
Done.. https://youtu. be/2dnP00FpWoU
hominine said:
So I've seen many different answers to what seemed to be the problem with the WiFi on my new M9. After connecting, data would throttle down to near nothing and occasionally come back, if only for a moment.
The fix was ridiculously simple, navigate to "Wifi Direct" under WiFi settings and rename the device in the submenu. After spending many hours tinkering with settings, reflashing, and almost returning the phone It was difficult to believe this was the difference that made the difference. I hope this helps someone and many, many thanks to the YouTube poster Rocky Xyzz to whom I cannot link yet due to my lurker status.
Click to expand...
Click to collapse
I had the same problem and this seems to have fixed it. Thanks a million! Why would an update set the WiFi Direct name to something that causes so much trouble? HTC really needs to fix this - I was almost ready to send my M9 back because music streams kept stopping!
sausje85 said:
Ah ok, no I haven't yet. It just disappeared and now is happening to data suddenly (no matter what provider or network FYI).
Click to expand...
Click to collapse
Found a solution for your device? Tried getting back to stock, does it happen ?
exebreez said:
Found a solution for your device? Tried getting back to stock, does it happen ?
Click to expand...
Click to collapse
Nope, the going back to root and updating firmware only caused it to jump from happening to wifi, to happening to data (3G/3.5G/4G), now when I'm outside my data acts the same (as in still connected but somehow no connectivity)... I've already tried what people suggested here but that didn't help me.
Seems like a hardware related issue, saw it on my m7 a year ago.
If not tried before, try to reflash the latest modem firmware.