Related
Just a quick FYI for those of you, and possibly a thread for culmination of MobileOdin and ICS info.
So far, I'm 0 for 2 in flashing ICS (FC05 and FC07) to my phone. Each time would spur a "kernel panic upload" right in the middle of flashing the system. I did not have a custom recovery in either case.
A battery-pull was required to reboot my device, and it became soft-bricked. I was able to boot into recovery and download mode.
Since I don't have a PC at home, and my work PC won't let me put Odin on it, I was stuck flashing a custom kernel with Heimdal. No big deal, which let me boot back into CWM and flash Caulk's 2.9.1 back onto the device (I keep a copy of a working, CWM-flashable, full ROM on the external SD card).
silversx80 said:
Just a quick FYI for those of you, and possibly a thread for culmination of MobileOdin and ICS info.
So far, I'm 0 for 2 in flashing ICS (FC05 and FC07) to my phone. Each time would spur a "kernel panic upload" right in the middle of flashing the system. I did not have a custom recovery in either case.
A battery-pull was required to reboot my device, and it became soft-bricked. I was able to boot into recovery and download mode.
Since I don't have a PC at home, and my work PC won't let me put Odin on it, I was stuck flashing a custom kernel with Heimdal. No big deal, which let me boot back into CWM and flash Caulk's 2.9.1 back onto the device (I keep a copy of a working, CWM-flashable, full ROM on the external SD card).
Click to expand...
Click to collapse
Good info. Ive flashed kernels to the ICS roms using mobile ODIN but ive always gone back to EL29 and flashed using Rogue CWM for new roms.
RainMotorsports said:
Good info. Ive flashed kernels to the ICS roms using mobile ODIN but ive always gone back to EL29 and flashed using Rogue CWM for new roms.
Click to expand...
Click to collapse
Same here. Mobile Odin for kernels and CWM for roms works for me, and I flash a lot.
Sent from my Galaxy S II, AOKP style.
I'm sorry, Im confused. I have been searching and I have read 3 seemingly contradictory facts:
- NEVER flash CM9 with any other recovery other than clockwork mod
- NEVER use odin to flash clockwork mod on an ICS rom
- You can flash a newer version of CM9 over the old one
So i'm using CM9 RC0 and I would like to update to alpha2 without wiping. CWM disappeared when i flashed and I keep reading that its dangerous to use the stock rouge recovery. So I went to go use odin to get CWM back on but there is a warning to never try to load it using an ICS rom?
Where am I going wrong here? I really dont want to wipe and flash to a GB rom just so that I can use odin to get CWM and flash back to cm9.
Thanks, I just wanted to make sure i didn't ruin my phone!
drumstyk1 said:
I'm sorry, Im confused. I have been searching and I have read 3 seemingly contradictory facts:
- NEVER flash CM9 with any other recovery other than clockwork mod
- NEVER use odin to flash clockwork mod on an ICS rom
- You can flash a newer version of CM9 over the old one
So i'm using CM9 RC0 and I would like to update to alpha2 without wiping. CWM disappeared when i flashed and I keep reading that its dangerous to use the stock rouge recovery. So I went to go use odin to get CWM back on but there is a warning to never try to load it using an ICS rom?
Where am I going wrong here? I really dont want to wipe and flash to a GB rom just so that I can use odin to get CWM and flash back to cm9.
Thanks, I just wanted to make sure i didn't ruin my phone!
Click to expand...
Click to collapse
What you want to do is flash the EL26 kernel with CWM through Odin. Once it's flashed and the phone starts to reboot, pull the battery. Put the battery back in, boot into recovery via Vol up+ power and then flash Alpha 2 over RC0, flash GApps and reboot. You should be good to go then.
Sent while hanging with that really hoopy frood Ford Prefect.
If you haven't already, I believe the OP has updated the steps fairly well here:
How Not to Brick Your E4GT
Flashing roms on Epic4gtouch is so complicated. I remember when I had my HTC hero. All you gotta do is download the rom, put it in your sdcard, open rom manager then flash xD
snapback2 said:
Flashing roms on Epic4gtouch is so complicated. I remember when I had my HTC hero. All you gotta do is download the rom, put it in your sdcard, open rom manager then flash xD
Click to expand...
Click to collapse
This is a recent thing that started when the ICS leaks started coming. Before ICS, rooting and flashing this phone was as easy as any. It still is actually, but you have to be more careful, especially with any of the AOSP ROMs. It should be back to normal once the official ICS update is released and we get our hands on the source code.
Sent from my SPH-D710 using Tapatalk
blackroseMD1 said:
What you want to do is flash the EL26 kernel with CWM through Odin. Once it's flashed and the phone starts to reboot, pull the battery. Put the battery back in, boot into recovery via Vol up+ power and then flash Alpha 2 over RC0, flash GApps and reboot. You should be good to go then.
Click to expand...
Click to collapse
Worked perfectly! Hopefully you have helped many noobs down the road when they search for this. What threw me off was QBKings video when he kept warning to never flash EL26 on ICS. (Mad respect though, QBKing!). Thanks for clearing that up for me!
On a side note, yeah, things seem complicated. I know there is a good reason why CM9 doesn't include a good recovery but I hope as things develop we will eventually get back to the "Rom Manager" days. Man, our devs spoil us!
Hey everyone.
I own a Samsung Galaxy Gio GT-S5660M With Android 2.3.4 Gingerbread that I got from Bell Aliant Along With a Motorola Xoom Wifi Canadian That I bought at Wal-Mart one day.
I am intrested in flashing Custom Roms onto My Samsung Galaxy Gio Gt-S5660M. I have Rooted and Installed ClockworkMod on my Samsung Galaxy Gio Gt-S5660M. I have recently been looking up stuff on how to install them onto my Samsung Galaxy Gio Gt-S5660M. I recently attempted to install Android 4.0.3 Ice cream Sandwich onto it. and I realized that I installed the wrong one because it was for the S5660M Model Not the GT-S5660M, Resulting into a boot failure. as the screen would fade out to black when booting to the Operating System. I was still able to access the Recovery mode (I never Had ClockworkMod Installed at that time) and the Custom ROM Download mode (Vol Down + Home + Power button) but it would fail to connect to my PC (Windows 7 Home Premium & Ubuntu Linux 64-bit) So Later on I told my dad about it and he sent it to bell Aliant to get it fixed. And now I would like to know how I can install a custom ROM and If I ever come across this problem again, how can i solve it without taking it to Bell Aliant to get fixed (Since it's a software related issue)
Thank You For reading and I hope to hear a reply for someone.
When you flash a rom it is very important to do a backup before hand. You sound like your new to this so your in the right place. Whenever you do a back up and you run into a problem like the one you ran in to, it's very simple to restore back to its original state. Also, most companies won't cover software issues once they figure out your rooted. So you might run in to a problem with your company. My advice is to read read read read and ask as many questions as possible before doing anything to your phone you aren't sure about.
Sent from my SGH-T989 using xda premium
Some more things, it is very useful for you to download ROM MANAGER and TITANIUM BACKUP from the app store. These two apps are life savers when you run in to the problem you had. Also read on how to use clock work mod recovery. Try to get very acquainted with that program as it will be ure main life saver in any situation.
Sent from my SGH-T989 using xda premium
help to reistalled stock rom 2.3.6
i have gio updated to 2.3.6 from samsung kies. then i flash CM9 nightly on 12 jun-2012.
i m new to this and made a mistake did not creat backup.
now i wana reinstall gingerbird 2.3.6.
plz help me... plzzzz
[email protected] said:
i have gio updated to 2.3.6 from samsung kies. then i flash CM9 nightly on 12 jun-2012.
i m new to this and made a mistake did not creat backup.
now i wana reinstall gingerbird 2.3.6.
plz help me... plzzzz
Click to expand...
Click to collapse
hold the power button, the volume down button, and the HOME button at the same time, when the phone is off. then use a tutorial on how to flash roms with ODIN, download a rom from sammobile.com
Here's some ROM's that I am interested in installing:
http://forum.xda-developers.com/showthread.php?t=1414173&page=435
http://forum.xda-developers.com/showthread.php?t=1659450
http://forum.xda-developers.com/showthread.php?t=1708383
Would I install them something like this?:
1. Download & Place this rom on your root sdcard
2. Go to recovery mode
3. Install zip from sdcard, install rom (cwm) | Install menu, install rom (RZR)
4. Wait till installation completed
5. Reboot
7. Reboot & Play
also about Rom Manager, I read this Thread:
http://forum.xda-developers.com/showthread.php?t=1706999
but I can't get the "GT-s5660m" Option to show up on it. Maybe it's the M on the end of it
After the installation is finished, you need to do a factory reset, then reboot.
Otherwise you cant boot.
And for cm9 it may be required to have atleast a gingerbrea2.3.x rom
Sent from my GT-S5660 using xda premium
Vzqsmooth56 said:
Some more things, it is very useful for you to download ROM MANAGER and TITANIUM BACKUP from the app store. These two apps are life savers when you run in to the problem you had. Also read on how to use clock work mod recovery. Try to get very acquainted with that program as it will be ure main life saver in any situation.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Rom manager isnt good for the new ones, cause they will probably end up with a nice brick to throw at you
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!
(Frank) said:
Rom manager isnt good for the new ones, cause they will probably end up with a nice brick to throw at you
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!
Click to expand...
Click to collapse
Its Not bad for new phones, for new people, as they dont know how to use it..
Sent from my GT-S5660 using xda premium
voetbalremco said:
Its Not bad for new phones, for new people, as they dont know how to use it..
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
With new ones I was actually talking about "people"
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!
voetbalremco said:
After the installation is finished, you need to do a factory reset, then reboot.
Otherwise you cant boot.
And for cm9 it may be required to have atleast a gingerbrea2.3.x rom
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I have Android 2.3.4 on it will that work?
Also how can I backup my Stock rom on it as well.
I noticed a backup and restore option in Clockworkmod as well (I have Version 5.0.2.6) Will that work incase I mess up again?
First of all, do not use ROM Manager to install CWM, you will brick the device doing so.
The nandroid backup function in CWM should work, but having a working Odin install with your Odin-flashable stock ROM backup is always a nice plus.
While I don't have one personally, there have been reports on here of the same USB jig (a micro USB connector with the appropriate resistor between pins 4 and 5) used on the Galaxy S Vibrant working on the Gio as well. This is if it doesn't want to go into download mode anymore.
These are a few gotchas with flashing ROMs on the Gio I can think of right now:
-Don't flash the Euro baseband on the 5660M and vice versa. (The AMSS image in Odin tar files)
-Be sure to have your partitions in the appropriate file system format, and CWM to go with it. I'm talking about ext4 and Samsung's stock, and proprietary RFS format.
If you have the usual MUGK3 stock ROM all Canadian 5660Ms have been delivered with, install CWM (via Odin, or with root and the dd command), format to ext4 and install the latest CM9 nightly zip file. Nothing more to it really.
Darkshado said:
First of all, do not use ROM Manager to install CWM, you will brick the device doing so.
The nandroid backup function in CWM should work, but having a working Odin install with your Odin-flashable stock ROM backup is always a nice plus.
While I don't have one personally, there have been reports on here of the same USB jig (a micro USB connector with the appropriate resistor between pins 4 and 5) used on the Galaxy S Vibrant working on the Gio as well. This is if it doesn't want to go into download mode anymore.
These are a few gotchas with flashing ROMs on the Gio I can think of right now:
-Don't flash the Euro baseband on the 5660M and vice versa. (The AMSS image in Odin tar files)
-Be sure to have your partitions in the appropriate file system format, and CWM to go with it. I'm talking about ext4 and Samsung's stock, and proprietary RFS format.
If you have the usual MUGK3 stock ROM all Canadian 5660Ms have been delivered with, install CWM (via Odin, or with root and the dd command), format to ext4 and install the latest CM9 nightly zip file. Nothing more to it really.
Click to expand...
Click to collapse
I am not going to use ROM Manager to begin with. as my device is not listed.
I used the recovery to install Clockworkmod (CWM)
Also I noticed that some ROMs are strictly for S5660M Not the GT-S5660M.
If I want to Install a Rom That For the GT-S5660 Does it Matter if it has the "M" in the name of my model? as in GT-S5660M
Also is it possible to flash zip files with odin?
Or has the ROM only have to be in tar format?
One last thing
Well, Before I start flashing (Because I'm pretty close to knowing now)
I am going to post 5 final questions before I begin:
1) Does it matter about my Model code for a ROM?
EX: ROM Made for the S5660 or GT-S5660 And I want to Install it on my GT-S5660M
2) If I Come across the problem I had earlier that caused me to take it to bell to get it fixed, Will the Nandroid Backup & Restore fix it?
3) Is it possible to mess up installing a ROM that the phone is inaccessible to the Recovery & ROM Flasher?
4)If I forget to Factory reset my phone while installing a ROM, can I go back to the recovery and factory reset and reboot?
5)If I Choose to install this ROM:
http://forum.xda-developers.com/showthread.php?t=1414173
Can I install it on my GT-S5660M since I have Android 2.3.4?
If I Choose the Other 2 I mentioned:
http://forum.xda-developers.com/show....php?t=1659450
http://forum.xda-developers.com/show....php?t=1708383
Does it Matter what version of Android I have?
Once These questions are answered I will begin Installing Custom ROMs onto my GT-S5660M
Super Liam said:
Well, Before I start flashing (Because I'm pretty close to knowing now)
I am going to post 5 final questions before I begin:
1) Does it matter about my Model code for a ROM?
EX: ROM Made for the S5660 or GT-S5660 And I want to Install it on my GT-S5660M
2) If I Come across the problem I had earlier that caused me to take it to bell to get it fixed, Will the Nandroid Backup & Restore fix it?
3) Is it possible to mess up installing a ROM that the phone is inaccessible to the Recovery & ROM Flasher?
4)If I forget to Factory reset my phone while installing a ROM, can I go back to the recovery and factory reset and reboot?
5)If I Choose to install this ROM:
http://forum.xda-developers.com/showthread.php?t=1414173
Can I install it on my GT-S5660M since I have Android 2.3.4?
If I Choose the Other 2 I mentioned:
http://forum.xda-developers.com/show....php?t=1659450
http://forum.xda-developers.com/show....php?t=1708383
Does it Matter what version of Android I have?
Once These questions are answered I will begin Installing Custom ROMs onto my GT-S5660M
Click to expand...
Click to collapse
1 .zip files that you flash via recovery can be flashed easily, thats fine
Just watch out with odin roms like gioprio, they contain a baseband and you will have no service, but can easily be solved by flashing a m model baseband
2 I think not
3 no, unless you do it terribly wrong
Flashed 20+ roms and nothing bricked
4 yes.
Make sure partitions are ext4.. This can be done with ext4formatter zip or installing for example cm7 rom first, than cm9.
Just stay on gingerbread, android 2.3 or higher
2.3.3 or 2.3.4 doesnt make a difference
Sent from my GT-S5660 using xda premium
4 yes.
Make sure partitions are ext4.. This can be done with ext4formatter zip or installing for example cm7 rom first, than cm9.
Just stay on gingerbread, android 2.3 or higher
2.3.3 or 2.3.4 doesnt make a difference
Click to expand...
Click to collapse
So you're saying that I should install Cm7 and then CM9?
Would It matter if I choose CM7 or CM7.2?
and you're also saying I should install a ROM that has Android 2.3.X instead of one with Android 4.0.X?
OH! I forgot to ask one last question:
Where can I get a Stock ROM For my GT-S5660M?
Can I get it off my phone or would I have to download it off a website?
Yea I know I may asking a lot of questions, I just want to know how I can install a ROM properly without bricking it.
as for the last 2 ROMs i mentioned earlier, the process is the same eh?
I just need the most information that I can get.
Hi there.
There is a compiled list of all ROMs for the 5660 and 5660m Gio in the development area.
the Stock Rom for 5660M (The GT is nothing to worry about) is this link
http://forum.xda-developers.com/showthread.php?t=1385874
There are a few other custom roms made only for the 5660M.
You can absolutely use a rom that is s5560, but note:
If you are selecting a Rom that is flashed using odin, always open the .tar using winzip or 7zip and just check for a file called amss ... this is the broadband file which would cause you to lose your phone signal. if you want to use the ROM, remove that amss file.
is you are flashing a rom through clockwordmod, these don't change the broadband.
so you can freely use any of those ones, such as cm7, 7.1, 7.2 9 or other based on stock roms.
Cyanogenmod (cm) requires the internal file system to be ext4, where as most Rom based on stock can use either rfs (stock file system) or some do support ext4 internal for a bit of increased speed.
also check out this site
http://android.phiexz.com/device/galaxy-gio.html
if you need additional memory for more apps, there are such things as a2sd, link2sd and s2e you can research...
bdasmith said:
Hi there.
There is a compiled list of all ROMs for the 5660 and 5660m Gio in the development area.
the Stock Rom for 5660M (The GT is nothing to worry about) is this link
http://forum.xda-developers.com/showthread.php?t=1385874
There are a few other custom roms made only for the 5660M.
You can absolutely use a rom that is s5560, but note:
If you are selecting a Rom that is flashed using odin, always open the .tar using winzip or 7zip and just check for a file called amss ... this is the broadband file which would cause you to lose your phone signal. if you want to use the ROM, remove that amss file.
is you are flashing a rom through clockwordmod, these don't change the broadband.
so you can freely use any of those ones, such as cm7, 7.1, 7.2 9 or other based on stock roms.
Cyanogenmod (cm) requires the internal file system to be ext4, where as most Rom based on stock can use either rfs (stock file system) or some do support ext4 internal for a bit of increased speed.
also check out this site
http://android.phiexz.com/device/galaxy-gio.html
if you need additional memory for more apps, there are such things as a2sd, link2sd and s2e you can research...
Click to expand...
Click to collapse
About this Ext4formatter.zip that voetbalremco mentioned, where can I get it to, would I do this before installing the rom or after installing the ROM?
I know that I need to wipe cache partition, factory reset, and wipe Dalvik cache.
Would I do all of this first or after installation?
Like I said earlier I'm sorry for asking a lot of questions, I just need to most information I can get. lol
Super Liam said:
About this Ext4formatter.zip that voetbalremco mentioned, where can I get it to, would I do this before installing the rom or after installing the ROM?
I know that I need to wipe cache partition, factory reset, and wipe Dalvik cache.
Would I do all of this first or after installation?
Like I said earlier I'm sorry for asking a lot of questions, I just need to most information I can get. lol
Click to expand...
Click to collapse
Exformatter.zip
You use it before installing, same thing with the wipes.
By the way, this ext4formatter is a one time event.
Once it is done, its done.
The wiping is every time before you install a different rom.
WOOT!!!!!
I got CyanogenMod 7.2 sucessfully installed!!!
Thank you guys so much!!
Also I have a question:
If I ever want to upgrade from CyanogenMod 7.2 to CyanogenMod 9, How would I do it?
Hey Guys,
Currently a bit clueless about my new problem.. Wanted to update the rom on my phone and since then, I cant boot into a rom anymore. It will boot, show the lock screen and reboot (over and over again). But if I restore my stock rom via recovery, it works fine... My device is rooted (Unlocked) and otherwise was working great.
Any help is appreciated
Are you flaahing the boot.img through fastboot USB after you flash the ROM?
Sent from my HTC One X
I'm not a pro here but I had the similar probs and solved them.
First make sure you're using the right kernel files for each rom. Some need the boot.img to be flashed before rom flash.
Also if using UltraSmooth Rosie mods try the SuperSmooth one first as the Ultra smooth option would cause loops too on my device.
If nothing from the above applies:
With clockwork recovery (make sure it's newest version 5.8.4.0) use super swipe off the sd then clear all cache options and reset bat stats.
Thanks guys... Slept over it and fixed it this morning
Coming from the hd2, I feel stupid I couldn't fix it earlier.
I have been looking around for about an hour or two trying to find a solid tutorial on how to install a custom recovery to install new Roms. I flashed my phone onto Virgin Mobile on FH13. It seems to me that there is more than meets the eye to installing a recovery on this phone. I really don't want to mess anything up at all. Could anyone guide me the right way as to how I can get CWM on my phone? I appreciate any help you can give me. Thanks!
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
bongzilla said:
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953783
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
My phone already has root. Everything else is stock. 4.0.4, build FH13, with no custom recoveries.
I don't understand what you mean in your second paragraph with "repacked stock" or "custom tw kernel".
I am completely lost as to where I should be going. My plan is to install this rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies
How would I go around to getting this on my phone?
Also, what about this rom: http://forum.xda-developers.com/showthread.php?t=1810315
I am not sure which rom runs the fastest and most efficient. There are so many kernels for so many things, I have absolutely no idea which kernel to flash and how to flash it.
EDIT: So I have done some more reading up and I THINK I can starting to understand some of it. I assume the steps are to:
1. Install Mobile Odin Lite on my phone.
2. Flash the EL26 kernel on Odin Lite. Link to kernel: http://forum.xda-developers.com/showthread.php?t=1662295 (first kernel on the page)
3. This part I am kinda lost. Not sure if that kernel installed a new recovery or not. I assume I just reboot and go into recovery.
4. Nandroid a backup of my ICS stock that is on now? Can I even go back to this stock backup after putting on a new Rom? Which kernel would I need to install backup of stock?
5. Wipe data, dalvic, and install new Rom using instruction it came with. My problem is I want to run this Rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies and it has no instructions. I assume you just wipe data and dalvic?
6. flash Rom, then flash Gapp? It doesn't have a link for any of the Gapps, so either I have to find a link to download Gapp or that rom already comes with it? Not sure.
7. Reboot into new Rom? Not sure if I missed a step or not.
Another question I have is with the kernels. Can I just leave it on the EL26 kernel for daily use of the phone? Say I want to install maybe cm10 next, do I just keep it on EL26?
Sorry for the spam of questions. I like to be 100% certain.
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
RainMotorsports said:
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
Click to expand...
Click to collapse
Ah, I read it twice and now it makes more sense. I have a pretty good idea of what to do now.
Put rom and gapp on phone, install EL26, backup, full wipe, flash rom and gapp, rom will install new kernel for me, then just reboot.
Last question, I just want to make sure. What exactly is a full wipe on this phone. I have done plenty of full wipes on the evo 4g. I am just asking because I hear some people have problems when they do a full wipe.
I really appreciate your help. Thank you!
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
RainMotorsports said:
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
Click to expand...
Click to collapse
That clarified a lot, thanks.
So I did it all. I did a factory reset from the new kernel. did dalvic also. I installed the new rom and gapp. Problem is that once I reboot, it shows the Galaxy SII screen, then goes into a black screen. I can't turn it back on again, so I remove the battery and it can restart. Does the same thing though. I followed your instruction and http://e4gtcm.blogspot.com/p/cm9-install-guide.html
What did I do wrong? I am worried I messed up my phone completely.
EDIT: So I went back into recovery and it was now a new version of CWM. I did everything over again; factory reset, cache, dalvic, and it is doing the same thing. Boots up "Galaxy SII" screen, then a black screen. It seems to still be on in the black screen seeing that it doesn't "turn" on again. I can hold if for 15 second or so for it to reset and does the same thing. Why is there a black screen?
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me. goo.im seems pretty slow today.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far. I can upload one of the builds I have if you think ti would help any.
RainMotorsports said:
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far.
Click to expand...
Click to collapse
Phew! I was pretty positive that I could still get back to something working, just my paranoid self was getting tense. I got 10/28. I guess I will do 10/20. Do you know what the other updates have? I would hate to install something that isn't working its most efficient.
Again, thank you so much. You were of great help! Good luck with the weather issue. Hope you're safe!
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
RainMotorsports said:
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
Click to expand...
Click to collapse
I just got it downloaded. It is now up and running perfectly. I appreciate all your help man, thanks a bunch. I live in Washington state. So the weather wont affect me.
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
n1stunna84 said:
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I assume you do the same thing as I did. Get the EL26 kernel and flash it with Mobile Odin. I would wait on someone else to confirm that though.
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
joshlete said:
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
Click to expand...
Click to collapse
You either need a kernel with built in over clock support(you'd see the CPU slider go up to 1400-1600 automatically if it was). Or a kernel that supports over locking in tegrak, which you "load over clock module" with in tegrak.
Both Kuban kernel and some of Agats kernels have built in support, mine you need to use tegrak as I have not added built in yet
You can get them all in rwilco's (awesome) kernel repository stickied in development
Sent from my SPH-D710 using xda premium