[MOD]HomeKey Wake Disable/Enable[MOD] - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

HomeKey Wake Disable/Enable
I have created a couple of simple CWM-flashable zips that will disable the homekey as a wake button (homekey-wake-disable.zip) and re-enable it (homekey-wake-enable.zip).
I got the idea for these after running jt1337's TuchMi S3X v5.0 rom. In the Changelog for his rom, he had listed disabling the homekey wake as a feature on v4.0. However, on v5.0 he had reverted to the v3.0 base, and the homekey wake disable feature was removed. I felt that making this as a separate mod would be a good idea, since I HATE having the homekey as a wake button!
After doing a little digging, I found the keylayout files, and modified them directly on my phone to test if the change would be as simple as I thought it was. And it is! So I quickly copied the modified files out to my sdcard and made the homekey wake disable/enable zips.
IMPORTANT NOTES/DISCLAIMERS!!!
\begin disclaimer\
This MOD should NOT cause any permanent damages to your phone. It simply removes/adds two words to two files. WITH THAT BEING SAID, I am NOT responsible for any damages, losses, or nuclear holocausts caused by your flashing of either of these zips. YOU are the one flashing the files, and you are responsible for your own actions.
\end disclaimer\
\begin notes\
This has only been tested on Samsung-based roms. I run a Samsung-based rom, and I have no desire or intention of switching to AOSP-based roms. Well, for now anyway! In THEORY this should also work on AOSP-based roms, although I am not 100% sure of the location of the keylayout files on AOSP base, nor am I 100% positive that AOSP-base uses identical keylayouts. If you are running an AOSP-based rom (i.e. CM9/CM10/AOKP/etc.) and you wish to test this mod out, please feel free to do so, keeping this in mind: if the homekey-wake-disable.zip does NOT work, or if it causes unwanted side effects, DO NOT FLASH homekey-wake-enable.zip!!!! More than likely, any problems caused by homekey-wake-disable.zip on AOSP-base are due to differing keylayouts/file locations, and homekey-wake-enable.zip will NOT fix those issues. Simply re-flash your rom package to undo the changes. However, if homekey-wake-disable.zip DOES work on AOSP-base, please let me know, so I can remove this note!
Thanks to jethro650 for testing this on task650's AOKP build!! It SHOULD work on all AOSP-based roms, However, any reports from other AOSP-based roms would still be highly appreciated!!
The homekey-wake-enable.zip is ONLY intended as a way to revert the changes made by homekey-wake-disable.zip. It is NOT designed for ANY OTHER PURPOSE!! If you have a rom that has homekey wake disabled already, it may OR MAY NOT work to enable the homekey wake feature!!
\end notes\
To disable the homekey as a wake button
1. Download the homekey-wake-disable.zip and copy it to your sdcard
2. Reboot to recovery
3. Flash the zip.
4. Reboot and you're done!
To re-enable the homekey as a wake button
1. Download the homekey-wake-enable.zip and copy it to your sdcard
2. Reboot to recovery
3. Flash the zip.
4. Reboot and you're done!
To re-enable the homekey as a wake button (alternate method)
1. Reboot to recovery
2. Reflash your rom zip
3. Reboot and you're done!

Both zips work on task's 10/31 aokp build paired with kt's 10/31 kernel. Zips flashed with twrp 2.3.1Thanks for your work.

jethro650 said:
Both zips work on task's 10/31 aokp build paired with kt's 10/31 kernel. Zips flashed with twrp 2.3.1Thanks for your work.
Click to expand...
Click to collapse
Thanks for testing that! I would have tested it myself, but I haven't gotten bored enough with sammy base to jump over to aosp yet!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Any chance you can write a mod to disable volume rocker while screen locked?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

ryuhyoko said:
Any chance you can write a mod to disable volume rocker while screen locked?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
What exactly do you mean by "disable volume rocker while screen is locked"? Are you saying that you don't want to be able to adjust media volume while the screen is off? Or are you talking about the feature available in some roms where you can use the vloume rocker to wake the screen?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Sweet. Thanks, I have found it useful and annoying to have the home key wake the phone. I prefer now to disable!
Regards

Related

Reboot Mod?

Anyone have a link to the mod that puts the reboot into recovery options on the power button menu?
That option is in the /system/framework/android.policy.jar
If you extract it from a compatible custom ROM you can adb push it to yours or just install a custom ROM such as mine to get it built in.
Go into file manager then virtuous then extra goodies then check the option and it should work on sense roms. I think. Needless to say just nandroid first
Sent from my Incredible using XDA App

GingerSense3Stock SnappySlapMod Updated July29

Snappy-Slap-Modifications
Based Off Of Gingersense Thanks RMK
Links Are Now Working Use Gmail Linked To Phone Fast Way"" Free Hosting""
*Carousel
*Rooted
*Debloated
*Deoxed
*Increased Stock Speed
*Gingerbread/Sense 3 Stock
*Faster WiFi Tether (Infrastructure)
*Longer Battery Life
*Caller Id
*Memory Booster
*100% Stable
*New Camera
...................................................................
Requirements: S-Off and Clockmodrecovery
You Must Follow These Instructions Completely How I Post In Order. There is 5 parts.
To Get All Benifits Up Top Do Everything And Configue Apps.
Very Important Download Everything From The Links To The Main Root Of Your Sdcard Exclude PG32IMG.ZIP Move It To A Sub Folder In Your Sdcard. FileExpert Is A Good App To Do All This Moving Files. YOU MUST FOLLOW ALL INSTRUCTIONS EVERY DETAIL. You Must Start Fresh That's Why I'm Telling You To Do This.
Again Make Sure PG32IMG.zip Is In A Sub Folder On SDCARD.
Download All Links...
rmk-ROM-vivow_gingerbread_2.18.605.4-r1.zip http://files.virtuousrom.com/misc/roms/rmk-ROM-vivow_gingerbread_2.18.605.4-r1.zip Base Only No Changes Thanks RMK
Appstogowithrom.zip http://www.filehosting.org/file/details/249376/deKMuw725jWo17E8/AppsToGoWithRom.zip
Flash1.zip http://www.filehosting.org/file/details/249370/CuN5cZV0etAHvh0n/Flash1.zip
Flash2.zip http://www.filehosting.org/file/details/249371/3XV1xHQ8WHmHHy6i/Flash2.zip
Flash3.zip http://www.filehosting.org/file/details/249373/MFPzLHgP2EcXL23M/Flash3.zip
Flash4.zip http://www.filehosting.org/file/details/249377/oqMbypoO13arTN4I/Flash4.zip
PG32IMG.zip http://www.filehosting.org/file/details/249378/ghS24erYGkPtHJgz/PG32IMG.zip
Make Sure Fastboot Is Off In Power Settings
How To Install : Part 1 Base
1. Turn Phone Off Then (Hold Volume Down + Power Button) Choose Recovery
2. Clear Dalvik Cache In Advaced
3. Wipe Cache
4. Wipe Data/Factory Reset
5. Install Zip From Sdcard
6. Choose rmk-ROM-vivow_gingerbread_2.18.605.4-r1.zip
7. Reboot To Phone
8. Phone On (Go Ahead And Walk Through Steps, Setting Up Phone)
9. After Setting Up Steps (Go Into Market download FileExpert, Juice Defender, Rom Manager) Move PG32IMG.zip To The Root Of SDCARD
10. Imediately Turn Phone Off
How To Install: Part 2 Update
1. Phone Off (Hold Volume Down + Power Button)
2. You Should Be In Hboot Where It Says Press Up To Update
3. Press Up
4. When Complete Reboot To Phone Turn On
5. Use FileExpert To Delete The PG32IMG.zip File Off Your SDCARD.
6. Keep Phone On Pull Up Rom Manager
How To Install: Part 3 Modifications
DO NOT REBOOT TO RECOVERY OR SYSTEM UNTIL ALL STEPS ARE DONE STAY IN RECOVERY THE WHOLE TIME TO INSTALL ALL PART 3.
1. Use Rom Manager To Reboot Into Recovery
2. Install Zip From Sdcard
3. Choose Flash1.zip
4. Install Zip From Sdcard
5. Choose Flash2.zip
6. Install Zip From Sdcard
7. Choose Flash3.zip
8. Install Zip From Sdcard
9. Choose Flash4.zip
10. Reboot Phone
How to Install: Part 4 Apps For This Rom
1. Using File Expert Hold Down AppsForThisRom.zip And Decompress File.
2. Hold Down The Decompressed File And Click Install All APK.
3. Reboot Phone
Part 5: Carousel
1.Download Utorrent Lite
2.Download this link http://www.btscene.eu/details/2545684/SPB+Shell+3D+for+Android+v1+1+1+Cracked.html
3.Follow directions in zip.
4.Good To Go
Instructions Are Very Clear Have Fun Enjoy Sense 3 The Free Apps And Rom.
Enjoy Sense 3 By Going to Personalize-LockScreens-Weather-Apply Hit Power Button 2x And Watch It Go.
WiFi Tether- Make Sure Mss Clamping Any HTC Routing Is Checked.
Customize Yoiur Sense 3 Lock Ring... http://forum.xda-developers.com/archive/index.php/t-1135020.html
*Bugs 1. You Will See 2 Voicemail Apps In Drawer. One Is To Your Messages, It Will Go Away When You Recieve A Message And Appear How It's Suppose To, But It Will Come Back After You Delete The Message. Were Working On This.
................................................................
Were In The Process Of Making A 3D.Oc.LAUNCHER All In One ROM. Coming In September.
*TeamRUD*
Donations Appreciated Link Below!!!!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=D5LHVFTXM6TCN
Any screen shots? Care to explain what each flash file contains? Also, if we are running the stock RMK and the new radio, do we skip to part 3?
Can we get pictures and are these simply SEO's Sense 3.0 port files renamed?
PearlMikeJam said:
Any screen shots? Care to explain what each flash file contains? Also, if we are running the stock RMK and the new radio, do we skip to part 3?
Click to expand...
Click to collapse
the PB32IMG.zip has the same stuff that's in the RUU. if u've installed that u have all ur stuff upgrade if not the files ok
Curious to hear reports and see screenshots. Thanks OP and devs!
I'm gunna give a test.
I am also willing to test this out once at home. I have a stable GB rmk rom anyway but I would like to try something new. Some screens/reports would be nice. If I get to install it soon I'll report back here.
Is this just Sense 3 lockscreen? or is it complete Sense 3 port
umm it's no different than what was posted here
http://forum.xda-developers.com/showthread.php?t=1165401
yoitsbry said:
Is this just Sense 3 lockscreen? or is it complete Sense 3 port
Click to expand...
Click to collapse
lockscreen
lmao thats what I was thinking....... Its just SEO's sense 3.0 ports. I posted that earlier in this thread thinking the same thing....lol
you can basically just do the other way which had it first, then install the apps. thats the only difference, the apps.
hmmmm.........
andybones said:
umm it's no different than what was posted here
http://forum.xda-developers.com/showthread.php?t=1165401
Click to expand...
Click to collapse
I noticed no fc and new camera also noticed some files were changed and recompiled.
Works pretty good and apps are sweet love the camera.
Great Post.
Went smoothly.
Sent from my ADR6350 using XDA Premium App
REDSCARFACE1 said:
I noticed no fc and new camera also noticed some files were changed and recompiled.
Works pretty good and apps are sweet love the camera.
Great Post.
Went smoothly.
Sent from my ADR6350 using XDA Premium App
Click to expand...
Click to collapse
Any other new items? 3D carousel, expanded Quick Settings, MMS with bubbles?
Does this have 3D carousel and is MMS working?
REDSCARFACE1 said:
I noticed no fc and new camera also noticed some files were changed and recompiled.
Works pretty good and apps are sweet love the camera.
Great Post.
Went smoothly.
Sent from my ADR6350 using XDA Premium App
Click to expand...
Click to collapse
what is better about the camera?
yoitsbry said:
Does this have 3D carousel and is MMS working?
Click to expand...
Click to collapse
MMS yes, but has same two VVM icons from other thread who had this posted days ago
PearlMikeJam said:
Any other new items? 3D carousel, expanded Quick Settings, MMS with bubbles?
Click to expand...
Click to collapse
3D carousel, expanded Quick Settings, MMS with bubbles?
no, no, idk.
2-links are broken. Flash 3 and Pg32img.
Sent from my ADR6350 using XDA Premium App

[MOD] H To 4G Icon (All Roms)

This mod is a flashable zip which was created by biohazrd51 and I. It changes the 'H' icon in the status bar to the '4G' one. See below for all devices.
Note that it works for Mimicry only. Also, you will lose this mod every time you update the rom. I will take no responsibility if you magically transform your phone into a new device, the HTC paperweight
That said, all you need to do is:
1. Download the attached update-signed.zip to the root of your sd card.
2. Reboot into recovery, and make a nandroid backup, incase anything goes wrong. (It shouldn't)
3. Then, select install from sd card, and click on the update-signed.zip.
4. Reboot and enjoy.
Any questions,feel free to ask.
*Edit* blk_jack has put together a flashable zip that'll modify the H icon to 4G on any ROM (hdpi only). This also works in JB.This doesn't actually replace the SystemUI.apk, it just replaces the icons inside it and re-zip/zipaligns it.
Download and flash through recovery:
http://mimic.ca/~jeff/h_to_4g-blk.zip
If we have helped you, don't forget to press thanks!
blk_jack said:
Hm, which SystemUI.apk are you guys using for the base? The reason I ask is because mimicry contains many SystemUI changes that other cm9 based roms don't have. Replacing that file will break things for sure.
There are definitely better ways of doing this than providing a SystemUI.apk to flash over, though. I'll see what I can do.
EDIT:
Alright I just put together a flashable zip that'll modify the H icon to 4G on any ROM (hdpi only). This should also work in JB, though I haven't tested it. This doesn't actually replace the SystemUI.apk, it just replaces the icons inside it and re-zip/zipaligns it.
http://mimic.ca/~jeff/h_to_4g-blk.zip
Click to expand...
Click to collapse
unless you updated it from the general section
dragon-son said:
unless you updated it from the general section
Click to expand...
Click to collapse
Added blk_jack's mod.
Sent from my HTC Vision using xda app-developers app
masterleron said:
Also, you will lose this mod every time you update the rom.
Click to expand...
Click to collapse
It won't do that if you add addon.d support for it in /system/addon.d/ to preserve the SystemUI.apk app during updates. (course it would be better to perform the update and simply flash the zip back over it due to the type of app being modified).
Though instead what you could do is have a script in /etc/init.d/ to swap out the icons on bootup, and use the addon.d script to preserve that init script. That'll keep without having to reflash it all the time, like is already don't with google apps, or my dataswap/sd-ext enabler.
*Edit*
This also works in Jelly Bean, tested not too long ago.
Sent from my HTC Vision using xda app-developers app

[Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds

Hello everyone,
I decided to create this Q&A thread for my CM10.1 builds. General discussion for the ROM or questions/troubleshooting can go here. Not every issue is necessarily a ROM bug. Actual bug reports with logcats or kmsg or whatever's needed for the bug should still remain in the development thread.
I wanted to try this out to prevent people with less experience or fewer posts feel alienated from not being able to post in the ROM thread. This thread is open for the community to help each other with issues. I've started a short FAQ to prevent questions from being asked repeatedly and also to help everyone out.
FAQ
Q: How do I flash this ROM? Any special steps?
A: If coming from a different ROM, it's recommended to do a factory reset prior to flashing as well as wiping /system.
Q: How do I update from builds? Do I need to wipe?
A: Flash the new build in recovery. If you're using an ext4 no data limit mod be sure to flash it after the ROM before rebooting to prevent any loss of data or missing apps issues.
Q: Do I need to re-flash gapps when I update builds?
A: No you do not as they get backed up and restored by CM provided you don't wipe system before flashing the ROM.
Q: What kernel is included with the ROM?
A: This ROM ships with my latest incredikernel so there's no reason to flash a specific kernel after the ROM unless you want a different kernel/older version of incredikernel.
Q: I got notified in goo manager that a gapps update is available. Is it safe to flash?
A: no. The system partition is too small on the incredible and they won't flash properly. Use my gapps instead from my main ROM thread.
Q: Why does my camera show weird lines and graphic corruption?
A: I'm not 100% sure on the cause but it is most likely driver related. Every JB ROM has this issue. Use a third party camera like Camera ICS for now.
Q: The camera recording is so choppy. Is there anything I can do about it?
A: The performance of the GPU in the Droid Incredible is very limited and Jellybean was never meant to run on this phone. As a result, some of the methods used to get things to work are a bit hacky which can explain the general graphics glitching.
Q: Will there ever be official CM 10.1 nightlies?
A: No, the CM team has stated they won't bring the qsd8k devices to ICS or later which includes devices such as the Nexus One, Droid Incredible, and Evo 4g.
Q: HELPP!!! I lost the advanced reboot menu. What do I do?
A: There has been a change in CM to disable the Advanced Reboot Menu. Fortunately, it can be enabled in developer options. However, it will only be active while the device is unlocked.
Q: I can't adb into my device. What to do?
A: Seems to be a new issue now but once you enable adb network you can get in via adb even over USB.
Q: I get a process system has stopped responding on boot.
A: Select wait and it will go away. This is a known issue but not consistent. It seems to happen more frequently when using a theme chooser theme as the systemui components are swapped out on the fly.
Q: I want to flash the files for offline voice dictation but the mod says I need 34 MB free and I can't seem to free enough space.
A: Users have reporting the following can be removed and replaced with play store replacements. Unfortunately due to the limited partition size of /system (250MB), there's a lot of stripping of system apps needed to make enough room for the offline files. (There should not be any need to do this now due as of the 4/5 build and gapps)
Trebuchet (Nova), Calculator (Calulations) Apollo (in the Play Store), Exchange and email (Aqua Mail), CM File Manager (FX Explorer), and the accessibility features like talk back.
Also there are about 7Mb of ringtones in /system/media/audio/ringtones. I'd recommend keeping only the ones you want.
Nice FAQ so far. Feel free to take a look at my CM7.2 thread, which had a lot of tips or tricks. I had a bunch, and I can't really remember if they'd pertain to CM10.1.
tiny4579 said:
Q: How do I flash this ROM? Any special steps?
A: If coming from a different ROM, it's recommended to do a factory reset prior to flashing.
Click to expand...
Click to collapse
I'd throw in wipe /system as well. That's a common overlooked step, and without it, there's generally a lot of issues.
google play store issues and google framework services
Hello All
For some reason my phone is only letting me use facebook or foursqure with the google services framework frozen, with sd-maid google now will not do voice search ether with the google framework on or off, I have had this problem for the last month and nothing besides turning the google thing off works. Is there anything more I could do? This problem all so causes google play do crash when ever opened or run.
Thanks to any help!
I only flashed once so far, and back on 7.2 for the moment (a few of my apps didn't work) so figure this is a good place for the question.
How do you get Google Now from the lock screen and from the Launcher? Obviously it's fairly easy to get Google Voice Search working (with it reading aloud answers to you) but the actual Cards and stuff that automatically find things for you.
NYC Coyote said:
I only flashed once so far, and back on 7.2 for the moment (a few of my apps didn't work) so figure this is a good place for the question.
How do you get Google Now from the lock screen and from the Launcher? Obviously it's fairly easy to get Google Voice Search working (with it reading aloud answers to you) but the actual Cards and stuff that automatically find things for you.
Click to expand...
Click to collapse
The only way to get Google Now on the lockscreen is to manually add a shortcut to it using CM's built in lockscreen shortcut options. To access it from the launcher you launch the Google Search app.
tydiamond11 said:
Hello All
For some reason my phone is only letting me use facebook or foursqure with the google services framework frozen, with sd-maid google now will not do voice search ether with the google framework on or off, I have had this problem for the last month and nothing besides turning the google thing off works. Is there anything more I could do? This problem all so causes google play do crash when ever opened or run.
Thanks to any help!
Click to expand...
Click to collapse
My advice is a factory reset in recovery. It's most likely from incompatibilities between the system framework and apps and it's data. Did you do the wipe when installing CM10.1?
Keep in mind a data wipe will erase contacts, call logs, text messages. Contacts that are not backed up to gmail will be lost. Games that save data locally will also be lost. It's pretty common sense stuff but just warning you.
I know when I accidentally flashed CM7.2 and even once I flashed CM10.1 again before booting, things were messed up and I couldn't access the play store.
Re: [Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds (NIGHTLY)
I will try that, I do not remember if I did wipe or not but I did back up my apps and data using my backup root and it restored all the apps and data so could that have been the first problem ?
tydiamond11 said:
I will try that, I do not rememper if I did wipe or not but I did back up my apps and data using my backup root and it restored all the apps and data so could that have been the first problem ?
Click to expand...
Click to collapse
I always restore user apps and data without issue. If you restore app data for system apps you're going to run into issues, especially when crossing ROM versions.
Re: [Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds (NIGHTLY)
Where is the dev menu in the settings ? I look but it has to be under something
Sent from my ADR6300 using xda app-developers app
Re: [Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds (NIGHTLY)
tydiamond11 said:
Where is the dev menu in the settings ? I look but it has to be under something
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
Its hidden by Google on purpose. You have to tap build number in about phone 7 times to enable it.
Sent from my Galaxy Nexus using Tapatalk 2
Re: [Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds (NIGHTLY)
Thanks
Sent from my ADR6300 using xda app-developers app
Re: [Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds (NIGHTLY)
How do themes effect performance, I have just tried a few and they seem to make everything lag. Is this common?
Sent from my Nexus 10 using xda app-developers app
Re: [Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds (NIGHTLY)
Beardog1013 said:
How do themes effect performance, I have just tried a few and they seem to make everything lag. Is this common?
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
They shouldn't unless they're large because they just swap out images.
Sent from my Galaxy Nexus using Tapatalk 2
Re: [Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds (NIGHTLY)
tiny4579 said:
They shouldn't unless they're large because they just swap out images.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
OK thanks, I using Cobalt which I see has been mentioned a few times around here. I wondered with the extra animations and such, it seems to be a rather extensive theme.
Thanks for all you do.
Sent from my ADR6300 using xda app-developers app
Re: [Q&A][UNOFFICIAL] Tiny's CM10.1 Inc builds (NIGHTLY)
I am getting a lot of force clouse pop ups but it usually is just the app took longer to load and I just click wait. Is this a bug? Or just something that his in and out? Thanks
Sent from my ADR6300 using xda app-developers app
Is it generally safe to run the cpu at 1113MHz? I seem to get a smoother experience running it that high but I don't want to overheat it.
Also, I'm using ClockworkMod Recovery 5.0.2.0. non-touch. Am I able to upgrade to the touch version or am I stuck with my current one?
tydiamond11 said:
I am getting a lot of force clouse pop ups but it usually is just the app took longer to load and I just click wait. Is this a bug? Or just something that his in and out? Thanks
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
This has been reported in the ROM development page. Any specific apps? YouTube is known to occasionally force close on boot and system can report the process not responding with a wait and ok option.
Kaepernick said:
Is it generally safe to run the cpu at 1113MHz? I seem to get a smoother experience running it that high but I don't want to overheat it.
Also, I'm using ClockworkMod Recovery 5.0.2.0. non-touch. Am I able to upgrade to the touch version or am I stuck with my current one?
Click to expand...
Click to collapse
1113mhz should be safe. It doesn't run at the max 100% of the time anyways.
I haven't messed with the CWM touch builds but if there's an unofficial CWM touch build for the Inc I don't see anything that would prevent it from working.
It is a lot of time just on the settings or browser thanks
Sent from my ADR6300 using xda app-developers app
tiny4579 said:
This has been reported in the ROM development page. Any specific apps? YouTube is known to occasionally force close on boot and system can report the process not responding with a wait and ok option.
1113mhz should be safe. It doesn't run at the max 100% of the time anyways.
I haven't messed with the CWM touch builds but if there's an unofficial CWM touch build for the Inc I don't see anything that would prevent it from working.
Click to expand...
Click to collapse
Cool. I'll stick with this speed for now.
I switched to the latest TWRP. Seems to work well.
Sporadic indeed. Not getting the youtube error anymore. Rebooted twice.

Any back to kill app for D710?

Hi, need a mod to kill the foreground app by long pressing back button, or any way to kill an app with one touch, anyone?
Hold back to kill is built in to tdunham 's AIO. MOD..
http://forum.xda-developers.com/showthread.php?p=38038956
GB27 All in one Mod V4.5 Updated 08-11-13
blackcanopy said:
Hold back to kill is built in to tdunham 's AIO. MOD..
http://forum.xda-developers.com/showthread.php?p=38038956
GB27 All in one Mod V4.5 Updated 08-11-13
Click to expand...
Click to collapse
1-Mine is D710 boost mobile, can i install that mode? ( rooted with CWM)
2- When I click on the link you posted, Do I just install the last one "Sound Unlink Mod for AIO 4.4 & 4.5"- ?
OddJack said:
1-Mine is D710 boost mobile, can i install that mode? ( rooted with CWM)
2- When I click on the link you posted, Do I just install the last one "Sound Unlink Mod for AIO 4.4 & 4.5"- ?
Click to expand...
Click to collapse
I'm unsure about boost mobile compatibility, but you could ask in the thread. If compatible, you'd install the AIO 4.5.
The sound unlink is a separate MOD that unlinks all volume controls to operate independently. Some were experiencing all volumes turning up and down when trying to adjust the volume for just notifications, ringer or system etc...
Edit: tdunham has moved from Sprint to boost mobile recently, so I would think he made it compatible. You could always make a nandroid backup before trying. Open the "spoiler" button from the OP to see everything included in the MOD. It really transforms your phone in a very positive way.
blackcanopy said:
I'm unsure about boost mobile compatibility, but you could ask in the thread. If compatible, you'd install the AIO 4.5.
The sound unlink is a separate MOD that unlinks all volume controls to operate independently. Some were experiencing all volumes turning up and down when trying to adjust the volume for just notifications, ringer or system etc...
Edit: tdunham has moved from Sprint to boost mobile recently, so I would think he made it compatible. You could always make a nandroid backup before trying. Open the "spoiler" button from the OP to see everything included in the MOD. It really transforms your phone in a very positive way.
Click to expand...
Click to collapse
I downloaded GB27.AIO.Mod.Rev4.5.Deodex.zip, put it on external sd card, from cwm chose install zip from sd,
After reboot the only difference I noticed was that the home screen background was black, everything else was the same.
I have been trying to get that longpress back to kill for last couple of days with no success, that was the only reason I rooted the phone.
Yes, you can use this on Boost versions. The AIO does include the back to kill mod, if you've flashed it, it will work. You wouldn't notice any immediate changes as any changes you would need to make using the 3minit app that should now be in your app drawer. You did download the app correct? It's now a separate download, and the link can be found in the OP of the AIO thread.
Also, in the future, please post questions in the Q&A forum. That's why it's there
Stryke_the_Orc said:
Yes, you can use this on Boost versions. The AIO does include the back to kill mod, if you've flashed it, it will work. You wouldn't notice any immediate changes as any changes you would need to make using the 3minit app that should now be in your app drawer. You did download the app correct? It's now a separate download, and the link can be found in the OP of the AIO thread.
Also, in the future, please post questions in the Q&A forum. That's why it's there
Click to expand...
Click to collapse
I just need the name of the zip file I need to download. Can I do it with stock recovery or do I have to have cwm?
OddJack said:
I just need the name of the zip file I need to download. Can I do it with stock recovery or do I have to have cwm?
Click to expand...
Click to collapse
The zip is linked above, follow the directions in the op of that thread. And you will need cwm:beer:
Slithering from the nether regions of a twisted mind and tarnished soul

Categories

Resources