Today I finally got my USB Jig and successfully entered ODIN Mode.
I then flashed IMM76i on my Nexus...
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> bootloader.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> userdata.img
<ID:0/003> radio.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
...disconnected it and there it is again.
That damn bootloop I already had.
Got any idea on how to fix this?
btw. I'm looking for stock Jelly Bean as a .tar file
why are you using ODIN?
learn fastboot: http://forum.xda-developers.com/showthread.php?t=1626895
Fastboot unfortunately doesn't work.
In general no key combination works which is why I bought myself a USB-Jig.
domimatik said:
Today I finally got my USB Jig and successfully entered ODIN Mode.
I then flashed IMM76i on my Nexus...
...disconnected it and there it is again.
That damn bootloop I already had.
Got any idea on how to fix this?
btw. I'm looking for stock Jelly Bean as a .tar file
Click to expand...
Click to collapse
Ok so you said fastboot did not work as to why you used the jig correct?
What was wrong with the device before you used the jig? Softbricked, hardbricked?
Even though odin flashed successfully does not mean it flashed everything correctly.
Can you get into bootloader? If so, try doing factory reset.
While in bootloader, see if windows sees your device....if so see if fastboot works now.
Sent from my Galaxy Nexus
My phone got soft bricked after an ota update to Jelly Bean.
This includes an endless bootloop aswell as that all key combinations (for fastboot, bootloader) are disabled.
Related
hey i have a rom installed on my note 2 n7100 model running v4.3 .... the rom is running but i found that i don't have a recovery mod [no philz/twrp].. i used to have philz but suddenly when the rom is flashed the recovery mod has gone
how can i get a recovery mod???
flashing recovery via odin didn't work and always failing
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
aboalghool said:
hey i have a rom installed on my note 2 n7100 model running v4.3 .... the rom is running but i found that i don't have a recovery mod [no philz/twrp].. i used to have philz but suddenly when the rom is flashed the recovery mod has gone
how can i get a recovery mod???
flashing recovery via odin didn't work and always failing
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
and other times odin stops responding,.,, im afraid my phone would get bricked every time i do this
You might have to flash a rom that includes the pit file it sounds like yours I'd corrupt. I think there is a rescue package on mskips toolkit
Sent from my GT-N7105 using Tapatalk
I was trying to root my phone using the "Sprint Method" and couldn't get the Sprint or Verizon firmware to flash correctly
I was getting this error
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I had USB Debugging and OEM Unlocking enabled (Tried with OEM Unlocking disabled also)
Now the phone won't boot at all. I have tried to Factory reset it and get no errors BUT I'm stuck at the Boot logo forever (left it for ~2 hours)
I don't know if it matters but since the phone doesn't boot anymore so I cant enable OEM Unlocking again
Sorry if i'm being an idiot i'm new to this
Blake__ said:
I was trying to root my phone using the "Sprint Method" and couldn't get the Sprint or Verizon firmware to flash correctly
I was getting this error
Code:
Added!!
Odin engine v(ID:3.1203)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Get PIT for mapping..
Firmware update start..
SingleDownload.
emmc_appsboot.mbn
lksecapp.mbn
xbl.elf
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
I had USB Debugging and OEM Unlocking enabled (Tried with OEM Unlocking disabled also)
Now the phone won't boot at all. I have tried to Factory reset it and get no errors BUT I'm stuck at the Boot logo forever (left it for ~2 hours)
I don't know if it matters but since the phone doesn't boot anymore so I cant enable OEM Unlocking again
Sorry if i'm being an idiot i'm new to this
Click to expand...
Click to collapse
as you found....this doesnt work anymore...hasnt worked in months. do you guys not read anything ever before just flashing stuff lol?
you should be able to boot into download mode and flash the stock firmware to get your device working again at least
Sent from my SM-N930W8 using Tapatalk 2
force70 said:
as you found....this doesnt work anymore...hasnt worked in months. do you guys not read anything ever before just flashing stuff lol?
you should be able to boot into download mode and flash the stock firmware to get your device working again at least
Sent from my SM-N930W8 using Tapatalk 2
Click to expand...
Click to collapse
All the tutorials I found and all the youtube videos never said this doesnt work...
Tried flashing stock firmware, It gives the same error. Maybe I have the wrong firmware or something? Can you give a link to the current firmware?
Blake__ said:
All the tutorials I found and all the youtube videos never said this doesnt work...
Tried flashing stock firmware, It gives the same error. Maybe I have the wrong firmware or something? Can you give a link to the current firmware?
Click to expand...
Click to collapse
trust me you dont want the current firmware unless you like only charging to 60% lol!
if you have a CAN model like mine you want the PI3 firmware..
force70 said:
trust me you dont want the current firmware unless you like only charging to 60% lol!
if you have a CAN model like mine you want the PI3 firmware..
Click to expand...
Click to collapse
I managed to flash the original firmware using the Verizon software recovery thing. During first boot I was also able to skip/cancel updates so now my note is running without any limits and updates disabled via Package Disabler
Hello, I am trying to install stock firmware on my note 4. I think I downloaded the correct firmware, but I am not technologically savvy and when I try to use Odin, I receive this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please help me??
glopez12323 said:
Hello, I am trying to install stock firmware on my note 4. I think I downloaded the correct firmware, but I am not technologically savvy and when I try to use Odin, I receive this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please help me??
Click to expand...
Click to collapse
On what firmware are you and what firmware did you download? Did you tried different version of ODIN?
Clicking from the Edge of Galaxy
norbarb said:
On what firmware are you and what firmware did you download? Did you tried different version of ODIN?
Clicking from the Edge of Galaxy
Click to expand...
Click to collapse
My phone was on 6.0.1 but I could not find the right firmware online so I tried to downgrade. Is that possible? And yes, I tried different versions of Odin :/
glopez12323 said:
My phone was on 6.0.1 but I could not find the right firmware online so I tried to downgrade. Is that possible? And yes, I tried different versions of Odin :/
Click to expand...
Click to collapse
When you go to settings ->about device what is your baseband version?
Clicking from the Edge of Galaxy
Unfortunately I do not have access to my phone anymore menus anymore. I can only access download mode and emergency recovery screen.
glopez12323 said:
Unfortunately I do not have access to my phone anymore menus anymore. I can only access download mode and emergency recovery screen.
Click to expand...
Click to collapse
In THIS THREAD is firmware EPH5 and ODIN witch worked on so many phones. Try this.
Hi guys
I flashed a custom twrp recovery & LOS rom for first time on my S9
and now I'm trying to flash stock rom back again I wiped my system and data and booted into download mode and trying to flash stock rom via odin but it keep tuck on system.img
Code:
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> dqmdbg.img
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5284 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> up_param.bin
<ID:0/003> cm.bin
<ID:0/003> keystorage.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
also I've tried different versions of odin but still getting same problem.
or there is something I must do befor flashing stock rom on s9
It was a file problem I redownloaded the rom and it worked
abdelrahmannagi said:
Hi guys
I flashed a custom twrp recovery & LOS rom for first time on my S9
and now I'm trying to flash stock rom back again I wiped my system and data and booted into download mode and trying to flash stock rom via odin but it keep tuck on system.img
Code:
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> dqmdbg.img
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5284 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> up_param.bin
<ID:0/003> cm.bin
<ID:0/003> keystorage.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
also I've tried different versions of odin but still getting same problem.
or there is something I must do befor flashing stock rom on s9
Click to expand...
Click to collapse
You messed up a S9 that's crazy
([emoji3590]09-09-18[emoji3590])
abdelrahmannagi said:
Hi guys
I flashed a custom twrp recovery & LOS rom for first time on my S9
and now I'm trying to flash stock rom back again I wiped my system and data and booted into download mode and trying to flash stock rom via odin but it keep tuck on system.img
also I've tried different versions of odin but still getting same problem.
or there is something I must do befor flashing stock rom on s9
Click to expand...
Click to collapse
How long have you waited? It takes a long time to flash system
PoochyX said:
You messed up a S9 that's crazy
Click to expand...
Click to collapse
Thank you for your helpless post
Haxomen said:
How long have you waited? It takes a long time to flash system
Click to expand...
Click to collapse
but how long I've waited for around 30 Mins :crying:
I have an AT&T Note 10+, N975U1. I tried to flash a US unlocked firmware onto it, but that kinda didn't work... Now I'm stuck on this page that says " An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software". I tried smart switch, but it wouldn't recognize my phone in the emergency recovery. I decided to try to flash the ATT firmware, thinking that doing this might fix it, well not really, I'm stuck and I have no clue what I'm supposed to do.
Log:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> quest.fv
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img
<ID:0/003> carrier.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 8720 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> xbl_config.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> aop.mbn
<ID:0/003> bksecapp.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> km4.mbn
<ID:0/003> qupv3fw.elf
<ID:0/003> sec.elf
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> storsec.mbn
<ID:0/003> uefi_sec.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> multi_image.mbn
<ID:0/003> dspso.bin
<ID:0/003> vbmeta.img
<ID:0/003> vaultkeeper.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> vendor.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> dtbo.img
<ID:0/003> vbmeta.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> product.img.ext4
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EnderGopo said:
I have an AT&T Note 10+, N975U1. I tried to flash a US unlocked firmware onto it, but that kinda didn't work... Now I'm stuck on this page that says " An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software". I tried smart switch, but it wouldn't recognize my phone in the emergency recovery. I decided to try to flash the ATT firmware, thinking that doing this might fix it, well not really, I'm stuck and I have no clue what I'm supposed to do.
Log:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> quest.fv
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img
<ID:0/003> carrier.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 8720 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> xbl_config.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> aop.mbn
<ID:0/003> bksecapp.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> km4.mbn
<ID:0/003> qupv3fw.elf
<ID:0/003> sec.elf
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> storsec.mbn
<ID:0/003> uefi_sec.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> multi_image.mbn
<ID:0/003> dspso.bin
<ID:0/003> vbmeta.img
<ID:0/003> vaultkeeper.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> vendor.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> dtbo.img
<ID:0/003> vbmeta.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> product.img.ext4
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You need to download the firmware you had before or you can flash again the same code but use CSC (Not HOME_CSC) and restore everything after. The trick is to get back to the download screen, and for that you need quick hands, and here is how...
Hold the power button and volume down for 7 seconds or so, as soon as the phone resets leave the buttons and hold the volume up button. You will be back to the download mode. Ignore the red exclamation mark on the screen. Flash away and you will be fine. You can't go from U to U1 or vice versa and keep your original partition. HOME_CSC can not be used in that case.
BigE said:
You need to download the firmware you had before or you can flash again the same code but use CSC (Not HOME_CSC) and restore everything after. The trick is to get back to the download screen, and for that you need quick hands, and here is how...
Hold the power button and volume down for 7 seconds or so, as soon as the phone resets leave the buttons and hold the volume up button. You will be back to the download mode. Ignore the red exclamation mark on the screen. Flash away and you will be fine. You can't go from U to U1 or vice versa and keep your original partition. HOME_CSC can not be used in that case.
Click to expand...
Click to collapse
OMG I have no way of thanking you, it really sucks that I lost all my information since I don't have a backup of it, I'll definitely change that ASAP. Thanks for this, and have a great day!
I had same problem last night. My samsung note 10 plus got stocked on "an error has occured while updating the device software" .
Initially, I tried using home csc but it got stuck on same page. I then decided to use csc and still got stucked too. Phone Battery is drained and I ave no idea wat to do.phone brand is AT&T unlocked version in Nigeria. I don't know of the Odin version used is the problem but I used the same Odin version to update my samsung Note 8 & there was no problem. Pls help!!!
---------- Post added at 09:17 AM ---------- Previous post was at 08:22 AM ----------
I tried flashing it again with odin and phone still not entering download mode bt I got info somewhere here that flashing of firmware can still occur if stocked on the error screen. The process was moving and after a period of time. Odin wrote failed. Wat to do now???
The firmware am updating to is N975USQU3CTE7.
Or am I using the wrong firmware???
DEREK1414 said:
I had same problem last night. My samsung note 10 plus got stocked on "an error has occured while updating the device software" .
Initially, I tried using home csc but it got stuck on same page. I then decided to use csc and still got stucked too. Phone Battery is drained and I ave no idea wat to do.phone brand is AT&T unlocked version in Nigeria. I don't know of the Odin version used is the problem but I used the same Odin version to update my samsung Note 8 & there was no problem. Pls help!!!
---------- Post added at 09:17 AM ---------- Previous post was at 08:22 AM ----------
I tried flashing it again with odin and phone still not entering download mode bt I got info somewhere here that flashing of firmware can still occur if stocked on the error screen. The process was moving and after a period of time. Odin wrote failed. Wat to do now???
The firmware am updating to is N975USQU3CTE7.
Or am I using the wrong firmware???
Click to expand...
Click to collapse
In order to go to download mode , when phone is on and stuck (telling you to use Samsung switch), you want to take the following steps:
1. Restart the phone: push power button and volume down for 7 to 13 seconds. Phone will start a reboot.
2. Now comes a quick hand feature... As soon as the screen changes to the Samsung logo, lift your finger from the power button, keep the volume down pushed, and add a volume up button.
3. You will end up in the download mode window. Ignore the scary red exclamation character, use Odin with the right firmware. Flash the full ROM , not just CSC .
4. Restore your phone, as you will have a fresh new start.
One word of warning. If you flash the user data of your carrier, you better remember your PIN code. The phone is set to identify a factory reset as a potential 'theft attempt'
Good luck
i am having a similar problem. i can reboot the phone from the exclamation point screen to the initial download mode screen. then, i have to push the volume up key to continue, and it goes right back to the smart switch screen. stuck in a loop. can anyone help?
agc87 said:
i am having a similar problem. i can reboot the phone from the exclamation point screen to the initial download mode screen. then, i have to push the volume up key to continue, and it goes right back to the smart switch screen. stuck in a loop. can anyone help?
Click to expand...
Click to collapse
Disconnect the USB cable when you reboot and get to the download screen, if you are keeping it inserted. If you do not, I have no clue why is dies it..
EnderGopo said:
I have an AT&T Note 10+, N975U1. I tried to flash a US unlocked firmware onto it, but that kinda didn't work... Now I'm stuck on this page that says " An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software". I tried smart switch, but it wouldn't recognize my phone in the emergency recovery. I decided to try to flash the ATT firmware, thinking that doing this might fix it, well not really, I'm stuck and I have no clue what I'm supposed to do.
Log:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> quest.fv
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img
<ID:0/003> carrier.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 8720 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> xbl_config.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> aop.mbn
<ID:0/003> bksecapp.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> km4.mbn
<ID:0/003> qupv3fw.elf
<ID:0/003> sec.elf
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> storsec.mbn
<ID:0/003> uefi_sec.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> multi_image.mbn
<ID:0/003> dspso.bin
<ID:0/003> vbmeta.img
<ID:0/003> vaultkeeper.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> vendor.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> dtbo.img
<ID:0/003> vbmeta.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> product.img.ext4
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hey mate, I am also getting same error while trying to Flash Note 10+ firmware from BRI to TGY. Did you resolve this issue? I want to flash TGY firmware on SM-N9750 but getting this error so I had to revert to BRI firmware again.