sdcard wont mount... error after pluging it in to windows7 - EVO 4G Q&A, Help & Troubleshooting

I just tried the install zip from sdcard and the error message I get is E:Can't mount /sdcard
i plug in the the sdcard in to computer and works fine..
i formatted it wont help.
here is whats weird i put it on a windows 7 maching/computer to pull some pictures off and this is what happened after i did that now it wont charge the phone now i also get a Qualcomm CDMA Technologies MSM cant find drivers the driver on my windows xp was always android 1.0 or 2.0 i forget.
i also did factory reset didint work.
i tryed terminal emulator and it says it cant find sdcard.
i can get in to recovery so maybe this is a plus....
this is what keeps adding to my sdcard that is says it cant mount qxdm_20121021_041119_6.dm i have like 20 of thease files on sdcard from the phone..
please help thank you agein....

GBABYevo4g said:
I just tried the install zip from sdcard and the error message I get is E:Can't mount /sdcard
i plug in the the sdcard in to computer and works fine..
i formatted it wont help.
here is whats weird i put it on a windows 7 maching/computer to pull some pictures off and this is what happened after i did that now it wont charge the phone now i also get a Qualcomm CDMA Technologies MSM cant find drivers the driver on my windows xp was always android 1.0 or 2.0 i forget.
i also did factory reset didint work.
i tryed terminal emulator and it says it cant find sdcard.
i can get in to recovery so maybe this is a plus....
this is what keeps adding to my sdcard that is says it cant mount qxdm_20121021_041119_6.dm i have like 20 of thease files on sdcard from the phone..
please help thank you agein....
Click to expand...
Click to collapse
Sounds like you have corrupted your SD card,if formatting it using windows doesnt work and make sure you format it in FAT32,then its trash,you'll need to buy/try another one.I always make sure to disconnect from my pc by right clicking the icon and unmounting it from the computer.If you just pull it,thats one of the things that cause corruption,also over use and no formatting for long periods of time.

Diablo67 said:
Sounds like you have corrupted your SD card,if formatting it using windows doesnt work and make sure you format it in FAT32,then its trash,you'll need to buy/try another one.I always make sure to disconnect from my pc by right clicking the icon and unmounting it from the computer.If you just pull it,thats one of the things that cause corruption,also over use and no formatting for long periods of time.
Click to expand...
Click to collapse
ive tryed other sdcards and it wont work i have 5 samsung 8 gig and a 2 kingston 16 gig cards and none of them will work ..
i also put the sdcard that is in this phone in my other evo and my other evo see the card.
no sdcards will mount in this phone..

Related

Can't mount SD card through USB

I've tried to mount the SD card through USB on my Kaiser and it's not detected in windows 7 X64. Well, it sees a removable drive but nothing is in it.
I have Super Eclair 2.1 and data is on the SD card using data.img. Pretty much everything else about my phone is in my sig.
Dukenukemx said:
I've tried to mount the SD card through USB on my Kaiser and it's not detected in windows 7 X64. Well, it sees a removable drive but nothing is in it.
I have Super Eclair 2.1 and data is on the SD card using data.img. Pretty much everything else about my phone is in my sig.
Click to expand...
Click to collapse
use automount and maybe select mount for sd card.
Dukenukemx said:
I've tried to mount the SD card through USB on my Kaiser and it's not detected in windows 7 X64. Well, it sees a removable drive but nothing is in it.
I have Super Eclair 2.1 and data is on the SD card using data.img. Pretty much everything else about my phone is in my sig.
Click to expand...
Click to collapse
Isn't it because data.img is in use and mounted in android?
robuser007 said:
use automount and maybe select mount for sd card.
Click to expand...
Click to collapse
I do both.
voyteckst said:
Isn't it because data.img is in use and mounted in android?
Click to expand...
Click to collapse
That's what I'm thinking but I have no idea. What do people do to get their apps onto their SD card, without losing the ability to mount it through USB? BTW, Android is installed in NAND, but data is on the SD as data.img, if anyone was wondering.
try the SD split widget..there is a thread here on how to mount SD card using that. I use it and the SD card comes up just fine without any drivers on my windows 7 X64.
2nd option
use wifi file explorer...u can upload files using wifi..no wires...I like this one better!!
ubuntu
hey
i have the same problem on ubuntu
im running super eclari lite and ubuntu 10.04
on //computer there is an HTC android phone but i can not open it
what to do?
and how to use automount?
hardik119 said:
try the SD split widget..there is a thread here on how to mount SD card using that. I use it and the SD card comes up just fine without any drivers on my windows 7 X64.
2nd option
use wifi file explorer...u can upload files using wifi..no wires...I like this one better!!
Click to expand...
Click to collapse
Is it called APP2SD? I'm not very good at finding threads, could you post a link?
**EDIT**
I found this thread, but it's in the Vogue section. Is this it?
http://forum.xda-developers.com/showthread.php?t=634784
To mount the card, reboot the phone, select recovery mode, plug in the phone and press enter and exit. It will boot normally and when it finish booting, the card will be mounted
Yes that is it!! It works perfectly. It mounts SD card not only in windows 7 but also in windows XP. I havnt tried it with Ubuntu but I m pretty sure it will work with Ubuntu as well.
I use myns 1.6 so not sure if it works on 2.1 or not! Please try and let us know.
Dukenukemx said:
Is it called APP2SD? I'm not very good at finding threads, could you post a link?
**EDIT**
I found this thread, but it's in the Vogue section. Is this it?
http://forum.xda-developers.com/showthread.php?t=634784
Click to expand...
Click to collapse
thebulletfromhell said:
To mount the card, reboot the phone, select recovery mode, plug in the phone and press enter and exit. It will boot normally and when it finish booting, the card will be mounted
Click to expand...
Click to collapse
Thanks that worked for me. Now when Android is running it mounts the SD card just fine.
In the vogue forums I found out that it's likely to be a kernel problem.
Everything is a kernel problem.

[Q] Clorkworkmod cant find sd. Is it bricked?

Hi. I was loading a rom in recovery and first wiped system and data. when I went install the new rom I got the error "E:Can't mount /dev/block/mmcblk0p1 (no such device)". In other words, I have wiped the old and it cant find the new rom.
Previously I rooted by UnRevoked so I have not previously set up android sdk.
Am I screwed
Thanks
Have you tried a different SD card or the CD card in another PC?
Could be a faulty sd, or if not maybe try cleaning the contacts on the card and phone?
the card seems ok. It can be read via USB from recovery.
Is there any way I can set up a terminal connection and flash a rom from my computer?
I'm having the exact same issue with r6. The SD just won't mount even in recovery. When this happens there is literally nothing else to do, we need a solution!!!
Sorry to hear it Doogle. Im out of ideas too
Pretty lucky to not be the only one tho
Just so you know, mine is definitely USB bricked, but the SD thing is stopping me from being able to fix this.
It's quite unusual.
Any idea if its possible to set up a terminal?
or does usb bricked mean your comp cant see the phone?
I set up a thread earlier to find that out. No replies
Yeah when the phone is USB bricked the PC just can't detect it,
so it's impossible to flash RUUs, so I'm up against the wall unless
I can get this working
When Clockworkmod didn't find my SD, but card reader showed it ok, I used SDFormater to reformat card (remowed all partitions) and when formated in recovery.
Chartist said:
Hi. I was loading a rom in recovery and first wiped system and data. when I went install the new rom I got the error "E:Can't mount /dev/block/mmcblk0p1 (no such device)". In other words, I have wiped the old and it cant find the new rom.
Previously I rooted by UnRevoked so I have not previously set up android sdk.
Am I screwed
Thanks
Click to expand...
Click to collapse
i don´t know if i understand the problem right...but why you can´t flash another rom..?
Doogleman said:
Pretty lucky to not be the only one tho
Just so you know, mine is definitely USB bricked, but the SD thing is stopping me from being able to fix this.
It's quite unusual.
Click to expand...
Click to collapse
and if you copy a new rom via sd card reader to the sd card..and try to reflash..??
mendozinas said:
When Clockworkmod didn't find my SD, but card reader showed it ok, I used SDFormater to reformat card (remowed all partitions) and when formated in recovery.
Click to expand...
Click to collapse
ahh..this was the thing i don´t understand...but i think it´s a good tip
Have you tried reformatting your SD mate? The chance of that fixing it isn't high but it's worth a shot...I'm reformatting at the mo
Alex-V said:
i don´t know if i understand the problem right...but why you can´t flash another rom..?
and if you copy a new rom via sd card reader to the sd card..and try to reflash..??
Click to expand...
Click to collapse
Basically, the SD card is not mounting (if it's the same as me), so regardless of what .zips might be on it, it can't flash them...
Doogleman said:
I'm reformatting at the mo
Click to expand...
Click to collapse
So i hope this is the solution...good luck
i have formatted and formatted with no result
Chartist said:
i have formatted and formatted with no result
Click to expand...
Click to collapse
You're not using quick format option are you?
Because a proper full format is much more effective,
and takes a while to complete.
i am now waiting for sdformatter to do its magic. I hope it it learnt to format at Hogwarts!
nope. It still cant mount it

[Q] Dropped my phone - Now stuck in bootscreen

Hello guys,
I woke up too early this morning, and i accidentally knocked my phone off the stairs. It fell about 2 meters, bounced and then fell another meter, bounced and fell another meter and stopped.
Thankfully it was in a silicon case (i think that's what made it bounce) and there are no visible damages.
I picked it up, and it seemed to be working. After a few secs it went into sleep mode and would not wake up.
I removed the battery and rebooted, and i got the HTC screen, then the nexus boot screen and it stays stuck on the nexus boot.
I then entered recovery mode and thought i would try and restore my backup. I get the following message:
E: Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E: Can't mount /sdcard
I took off the SD card, put it my pc and it works just fine.
I got another SD card, copied a rom onto it and tried to reinstall through recovery.
I did a wipe/data factory reset and tried to install the rom.
I got the same message...
Is my Desire toast? It's only six months old...
I was running Defrost6.1 and using psfMod 0.9.7.2 as my recovery.
Any advice would be extremely appreciated.
Thanks
aalex
UPDATE
I did another wipe data / factory reset, and i rebooted.
The rom starts up, without any of my previous settings of course, but I still cannot mount my SD card.
From file manager, it seems that it is being mounted, but no files are listed...
When i try with gallery it reports "SD card unmounted or not present".
Any insights?
Drop it again, it helps
Daanlt said:
Drop it again, it helps
Click to expand...
Click to collapse
That's a helpful suggestion, thanks
Can u mount the SD card as usb storage in clockwork recovery?
Also try to boot it up normal and
Wait till the battery dies. Then insert the SD card and try again to boot it (with usb cable connected to have some battery power) again.
Gd luck
Sent from my HTC Desire using XDA App
mclaren2 said:
Can u mount the SD card as usb storage in clockwork recovery?
Also try to boot it up normal and
Wait till the battery dies. Then insert the SD card and try again to boot it (with usb cable connected to have some battery power) again.
Gd luck
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Thanks for responding mclaren2,
I tried to mount as usb storage, it seems that it mounts, my pc picks up an additional drive but when i double click on this drive it just says that it cannot be read...
With your SD card in your phone go into settings then storage and unmount SD card. Then format your SD card from your phones menu and it should mount the SD card see if that worked.
ste1164 said:
With your SD card in your phone go into settings then storage and unmount SD card. Then format your SD card from your phones menu and it should mount the SD card see if that worked.
Click to expand...
Click to collapse
Hi ste1164,
Thanks for responding. My problem is that my phone cannot pickup the existence of an SD card.
This is a typical USB-brick. I've had one a few weeks ago. You should look at this thread: http://forum.xda-developers.com/showthread.php?t=691639&highlight=usb+brick.
If you're new to this, it can be hard to get it working again. Just let me know if you have any problems. It took me a few hours to get it done
From fastboot via ADB, execute "fastboot oem enableqxdm 0" and then reboot it with "fastboot reboot" command.
See if it works.
If you don't remember how to do the above, just search.
koenvbeek said:
This is a typical USB-brick. I've had one a few weeks ago. You should look at this thread: http://forum.xda-developers.com/showthread.php?t=691639&highlight=usb+brick.
If you're new to this, it can be hard to get it working again. Just let me know if you have any problems. It took me a few hours to get it done
Click to expand...
Click to collapse
aalexandrou said:
Hi ste1164,
Thanks for responding. My problem is that my phone cannot pickup the existence of an SD card.
Click to expand...
Click to collapse
its not a usb brick, thats a software brick.... it sounds to me like you have a corrupt sd card, sd cards are very delecate and this can happen from a sudden impact, try formatting the card in windows explorer, obviously you cannot format your sd-ext using windows so try gparted or ubuntu to format your other partition.
AndroHero said:
its not a usb brick, thats a software brick.... it sounds to me like you have a corrupt sd card, sd cards are very delecate and this can happen from a sudden impact, try formatting the card in windows explorer, obviously you cannot format your sd-ext using windows so try gparted or ubuntu to format your other partition.
Click to expand...
Click to collapse
he switched sd cards and it still doensn't fix the problem
AndroHero said:
its not a usb brick, thats a software brick.... it sounds to me like you have a corrupt sd card, sd cards are very delecate and this can happen from a sudden impact, try formatting the card in windows explorer, obviously you cannot format your sd-ext using windows so try gparted or ubuntu to format your other partition.
Click to expand...
Click to collapse
Can't be sdcard, op said tried sdcard in PC and tried different sdcard...same result, must be sdcard reader or something.
You never know, might be a USB brick, just happened before the drop and was brought on by the reset...but I agree probably is hardware fault.
Is it possible to flash stock rom from fastboot without sdcard? Could try warranty repair then...
mercianary said:
Can't be sdcard, op said tried sdcard in PC and tried different sdcard...same result, must be sdcard reader or something.
You never know, might be a USB brick, just happened before the drop and was brought on by the reset...but I agree probably is hardware fault.
Is it possible to flash stock rom from fastboot without sdcard? Could try warranty repair then...
Click to expand...
Click to collapse
sorry i didnt notice that, could be a usb brick but like i said thats S/W related and i doubt dropping your phone could cause such an error, +1 suppose the sudden reset could cause the usb brick especially if the device was reading or writing to the sd card when it happened, could also be the sd card reader in the device has been damaged or one of the internal components. can the device read the sim card? if it dosent, could be a usb brick
Just a thought...is the sdcard reader attached by a ribbon? (never seen the inside of my desire, hope I never have to)
I'm sure I've heard of a few desires that can't read sdcard anymore, I reckon it's either attached by ribbon or it's the most delicate part of the phone.
I'm hoping it's a loose ribbon because that's an easy fix, even I could do that.
Hey guys,
Thanks to all of you for responding.
My sim card works just fine. I can make and receive calls, texts, go online via 3g and Wifi, connect through bluetooth. As far as i can tell, my phone does everythind it did before except mount an SD card. Also, the android market keeps crashing, and if i try and download anything from the net i get a prompt saying that i need an sd card to download.
So far I took the SD card and put it in my pc. I formated it, tried again but it didnt work.
I then tried a brand new sd card and that didn't work either.
However, I did not format the old card's ext2 partition, and the new sd doesn't have an ext partition yet.
Would this point to a USB Brick as mentioned above?
Would it be possible for me to flash the stock rom on the device?
Thanks once again, to all of you.
aalex
3722 said:
From fastboot via ADB, execute "fastboot oem enableqxdm 0" and then reboot it with "fastboot reboot" command.
See if it works.
If you don't remember how to do the above, just search.
Click to expand...
Click to collapse
Although i don't really understand what this means, could it be a possible solution?
If yes, how would i go about implementing it?
Yes, that should solve your problem. I had the same problem a few weeks ago, but that included a malfunctioning usb, even charging didn't work correctly.
To fix the sd-card, you should run the above command using the tool fastboot, available in the Android sdk. After downloading, cd to the tools folder in the sdk and then run the command while your phone is connected to your pc in fastboot mode. Then it should work again.
koenvbeek said:
Yes, that should solve your problem. I had the same problem a few weeks ago, but that included a malfunctioning usb, even charging didn't work correctly.
To fix the sd-card, you should run the above command using the tool fastboot, available in the Android sdk. After downloading, cd to the tools folder in the sdk and then run the command while your phone is connected to your pc in fastboot mode. Then it should work again.
Click to expand...
Click to collapse
Hey koenvbeek,
Thanks for the help. I think i may need a bit more of it
Here is what i did so far:
I used Nephrons guide to download and install ADB.
I then rebooted to bootloader. The phone displays "fastboot" and then when i plug it in it dispalys fastboot-usb
I then went to the ADB tools directory and tried to run the command.
I got a message saying the command cannot be run because adbwinapi.dll is missing from my system, and asking me to reinstall everything...
Clearly i made a mistake somewhere but where?
I don't think you made a mistake
Either the requested file is missing, or it can't be used by your computer. First check if the file is present. If not, google for it.
If it is present, your computer can't use it for some reason. Are you on a 64-bit OS? If you're on Vista/7: did you open the cmd promt as admin?
Yeah, nothing wrong, it's just that the API library is missing.
Download it from the attachment here, and put it in the "tools" folder, then try again.
Edit: As you can see it's in an archive, since dll attachment is not enabled here, so extract the file from it.

BAD DISK (mini tool partition wizard for link2sd)

Help, im using bionic2 rom and my internal/external is swapped, but i want more space on my system storage, that's why i want to use link2sd app, im following this guide for partitioning the sd card (1.7gb), but after i reboot, my sd card (1.7gb) is empty, and my computer no longer detects it, but i can still save on it, and when i open the mini tool partition wizard; it shows bad disk (see screenshot), ive tried to restore my cwm backup, but it doesnt help, hopefully someone can help me, and thanks in advance
vanir29 said:
Help, im using bionic2 rom and my internal/external is swapped, but i want more space on my system storage, that's why i want to use link2sd app, im following this guide for partitioning the sd card (1.7gb), but after i reboot, my sd card (1.7gb) is empty, and my computer no longer detects it, but i can still save on it, and when i open the mini tool partition wizard; it shows bad disk (see screenshot), ive tried to restore my cwm backup, but it doesnt help, hopefully someone can help me, and thanks in advance
Click to expand...
Click to collapse
Do you can save some file aren't ya ?
Try to format in setting > storage
Maybe it can help
Rio Saputro said:
Do you can save some file aren't ya ?
Try to format in setting > storage
Maybe it can help
Click to expand...
Click to collapse
ive already tried to format using my phone, it did format it, but still my pc couldnt detect it, and the MiniTool Partition Wizard stills says Bad Disk, and when im using the minitool, the option to format is grayed (not clickable), btw, thanks
vanir29 said:
ive already tried to format using my phone, it did format it, but still my pc couldnt detect it, and the MiniTool Partition Wizard stills says Bad Disk, and when im using the minitool, the option to format is grayed (not clickable), btw, thanks
Click to expand...
Click to collapse
Hmm..
BTW, have try you shut down the phone after format the SD ?
And do check again..
If the bad disk occur, in Win7 it will automatically recommend to do scan disk to fix it. If is not your SD is fine actually..
Rio Saputro said:
Hmm..
BTW, have try you shut down the phone after format the SD ?
And do check again..
If the bad disk occur, in Win7 it will automatically recommend to do scan disk to fix it. If is not your SD is fine actually..
Click to expand...
Click to collapse
ive tried to check in another computer and the pc search for drivers and install it, and it works just like the normal, it detects both internal/external, but my pc still cant detect it, ive uninstalled the MiniTool Partition Wizard and samsung drivers on my pc, and then i plugged in my phone, my pc installed the drivers, but it still cannot detect the internal sd, maybe the MiniTool Partition Wizard have some remnants after ive uninstalled it, but im happy to know that there is nothing wrong with my sd (1.7gb), but i cant reformat my pc, because its owned by the company where i worked, i just hope that it can be fixed
vanir29 said:
Help, im using bionic2 rom and my internal/external is swapped, but i want more space on my system storage, that's why i want to use link2sd app, im following this guide for partitioning the sd card (1.7gb), but after i reboot, my sd card (1.7gb) is empty, and my computer no longer detects it, but i can still save on it, and when i open the mini tool partition wizard; it shows bad disk (see screenshot), ive tried to restore my cwm backup, but it doesnt help, hopefully someone can help me, and thanks in advance
Click to expand...
Click to collapse
I don't think recovery from CWM can help this as it just restores "files" from nandroid where partition is another independent thingy. U did partition the sd card. So re-partitioning should be the solution to it.
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
vanir29 said:
ive tried to check in another computer and the pc search for drivers and install it, and it works just like the normal, it detects both internal/external, but my pc still cant detect it, ive uninstalled the MiniTool Partition Wizard and samsung drivers on my pc, and then i plugged in my phone, my pc installed the drivers, but it still cannot detect the internal sd, maybe the MiniTool Partition Wizard have some remnants after ive uninstalled it, but im happy to know that there is nothing wrong with my sd (1.7gb), but i cant reformat my pc, because its owned by the company where i worked, i just hope that it can be fixed
Click to expand...
Click to collapse
LOL~ That's the problem with the drivers in ur PC. Try to uninstall the driver and install again. There is still some weird problems with windows drivers installation especially USB.
yewsiong said:
LOL~ That's the problem with the drivers in ur PC. Try to uninstall the driver and install again. There is still some weird problems with windows drivers installation especially USB.
Click to expand...
Click to collapse
ive already tried to uninstall the samsung drivers, and connect my phone to the pc, it installs the drivers but it still cant detect the internal sd, is there any other method aside from formatting my pc?
vanir29 said:
ive already tried to uninstall the samsung drivers, and connect my phone to the pc, it installs the drivers but it still cant detect the internal sd, is there any other method aside from formatting my pc?
Click to expand...
Click to collapse
Oh~ meaning that ur PC can detect external sd via USB cable? Maybe u can try Dual Mount SD. I am using it to connect both internal and external sd to PC in one shot. PC and ur device are enable to read sd cards simultaneously.
yewsiong said:
Oh~ meaning that ur PC can detect external sd via USB cable? Maybe u can try Dual Mount SD. I am using it to connect both internal and external sd to PC in one shot. PC and ur device are enable to read sd cards simultaneously.
Click to expand...
Click to collapse
yes, my pc can detect my external sd, i tick usb debugging and when i connect my CP to the PC there is a notification in my CP and ill just have to click it to connect, normally it would detect both my internal and external sd, but after using the minitool partition wizard to make partition to my 1.7gb sd, my pc can no longer detect my 1.7gb sd (external because its swapped), and ive tried something, ive update my kies, and connect my phone with usb debugging untick, it detects my phone (GT-i8150 in my computer) with internal and external sd card. but still when im connecting with usb debugging on, only 1 sd card is detected, i guess my pc detects it as bad disk because of the mini tool partition wizard, but i dont know how to revert it, ive already uninstall the mini tool... but it doesnt help
vanir29 said:
yes, my pc can detect my external sd, i tick usb debugging and when i connect my CP to the PC there is a notification in my CP and ill just have to click it to connect, normally it would detect both my internal and external sd, but after using the minitool partition wizard to make partition to my 1.7gb sd, my pc can no longer detect my 1.7gb sd (external because its swapped), and ive tried something, ive update my kies, and connect my phone with usb debugging untick, it detects my phone (GT-i8150 in my computer) with internal and external sd card. but still when im connecting with usb debugging on, only 1 sd card is detected, i guess my pc detects it as bad disk because of the mini tool partition wizard, but i dont know how to revert it, ive already uninstall the mini tool... but it doesnt help
Click to expand...
Click to collapse
What is its format now? FAT?
yewsiong said:
What is its format now? FAT?
Click to expand...
Click to collapse
the 1.7gb is FAT while my 16gb msd card is FAT32, btw i manage to get it working by restoring my system, i didnt know that windows 7 has that feature, just now xD, i just restore my system on the date/time before i mispartitioned my sd, many thanks to those who have helped
vanir29 said:
the 1.7gb is FAT while my 16gb msd card is FAT32, btw i manage to get it working by restoring my system, i didnt know that windows 7 has that feature, just now xD, i just restore my system on the date/time before i mispartitioned my sd, many thanks to those who are willing to help
Click to expand...
Click to collapse
Wow~ fortunately. glad to hear that.
im facing same problem
I read abt it that bootIt cn be work in this situation, bt dont knw how to use it..
i usually used minitool pw to manage sd card, nothing's wrong. It seems you need use minitool power data recovery to recover the data on your bad disk.
same
Shayaq Raza said:
I read abt it that bootIt cn be work in this situation, bt dont knw how to use it..
Click to expand...
Click to collapse
i got the bad disk error too messing with M.T.Partition Wizard and link2sd, but neither M.T.P.W. or the prompt commands to format the sd from pc worked so far..
The pc sees the sd for 1-2 seconds and ask to format it, then it s not accessible any more, and the formatting attempts (both from the pop-up message and prompt) results in a "cyclic redundancy check error" and fail..
i dont mind losing the data, i just want to keep using that sd
explained here: https://forum.xda-developers.com/showpost.php?p=72729502&postcount=38933
so, did u fix it anyway/found a guide to use bootit ?
thanks a lot
---------- Post added at 02:40 PM ---------- Previous post was at 02:30 PM ----------
vanir29 said:
the 1.7gb is FAT while my 16gb msd card is FAT32, btw i manage to get it working by restoring my system, i didnt know that windows 7 has that feature, just now xD, i just restore my system on the date/time before i mispartitioned my sd, many thanks to those who have helped
Click to expand...
Click to collapse
I m experiencing EXACTLY the same thing, can you explain how did you solve that?
Btw i was really giving up with it, i m so happy that someone actually solved it
waiting for your answer :fingers-crossed:

[Q] HELP I lost all my HOX data.:crying:

hi friends,
today i update my hox with the new firmware orange uk to jelly been and after i install ARHD 18.
After the instalation complete the phone turn on normaly everything is working good.
the only problem is the phone lost all photos,music,and videos i got there.
is any solution to get all my data back
thanks
regards
Hello,
Try using one of these softwares:
http://lifehacker.com/5237503/five-best-free-data-recovery-tools
Good luck...
i have try the software u said.
but the problem is they dont detect the internal memory of the HOX.
after uptade to jelly bean when i plug the usb cable dont appear like in ICS for choose to charge or to hard disk.
so how to solve this?
thx regards
did you looked on pc also...? it can also be that you must update htc sync because of the mtb thingy.....second should be look for an sd speed app..and set it to 128 instead of most 2048.....
if that also fail...the data should be gone...maybe a wipe script that also wiped sd card or something like this
go into recovery and mount usb storage
hi
i have try go to recovery with clockworkmod and if i try to mout sd card nothing happen.
i choose mount sd card and then i reboot the phone and apears unmout again.
and in the phone if i go to settings and storage on the bottom said USB Storage device is not available.
thx
regards
badscorpion said:
hi
i have try go to recovery with clockworkmod and if i try to mout sd card nothing happen.
i choose mount sd card and then i reboot the phone and apears unmout again.
and in the phone if i go to settings and storage on the bottom said USB Storage device is not available.
thx
regards
Click to expand...
Click to collapse
what version of cwm...htc sync updated..?
yes htc sync is updated and the cwm is 5.8.4.0.
thx
so from that side all ok...if you are in a file explorer...and go to sd..you see something...? if yes..try to mount from clockwork...if not work...try to copy the files with adb
Tough luck brother, if all else fails then deal with it. Many, including me, have faced the same. Good luck to you.
When you mount the USB mass storage in recovery you have to stay on that screen or it will auto-unmount. Once you've done that load up Recuva from Piriform and scan for the phones storage on the pc.

Categories

Resources