Develop Bugs

Must have missed something - forcing updates?

All this time, whenever an OTA update is available, I have been unrooting my phone, returning back to stock, allowing the OTA update to run, then applying my root back. I have to think there's an easier way than that to allow my phone to update from 4.0.4 to 4.1.2. All I have is root and CWM, is there a stock 4.1.2 file that I am supposed to be flashing instead of my previous painstaking ways?

serstylz2 said:
All this time, whenever an OTA update is available, I have been unrooting my phone, returning back to stock, allowing the OTA update to run, then applying my root back. I have to think there's an easier way than that to allow my phone to update from 4.0.4 to 4.1.2. All I have is root and CWM, is there a stock 4.1.2 file that I am supposed to be flashing instead of my previous painstaking ways?
Click to expand...
Click to collapse
Checkout the android development section. There are Odin and zip flashable stock rooted updates you can use which are ever so much easier than unrooting and rooting again.

tkepk181 said:
Checkout the android development section. There are Odin and zip flashable stock rooted updates you can use which are ever so much easier than unrooting and rooting again.
Click to expand...
Click to collapse
Thanks.. just ran into this thread too http://forum.xda-developers.com/showthread.php?t=1904099
Gonna read around this evening

serstylz2 said:
Thanks.. just ran into this thread too http://forum.xda-developers.com/showthread.php?t=1904099
Gonna read around this evening
Click to expand...
Click to collapse
Just make sure that when you flash the LJ7 zip, you flash the following files IN ADDITION TO THE ROM
1. Team Epic Root from Recovery
2. Custom Recovery - download one of the recoveries found in the OP in billiard's thread. I'm a big fan of TWRP, but to each their own
If you just flash the zip, then all you're going to do is return your phone to stock with the stock recovery image.
Happy flashing!!!!

Question about rooting with odin

I recently took the ota update to 4.1.2 mb1 and lost root. My question is can I use odin to flash [ROM|Stock Rooted] 3/3/13 Sprint Touchwiz Jelly Bean 4.1.2 (L710VPBMB1) Odex/DeOdex? And If so do I use the full ROM odex? And Do I have to flash anything besides the ROM? Or can I keep everything else stock?

Monoclypsus said:
I recently took the ota update to 4.1.2 mb1 and lost root. My question is can I use odin to flash [ROM|Stock Rooted] 3/3/13 Sprint Touchwiz Jelly Bean 4.1.2 (L710VPBMB1) Odex/DeOdex? And If so do I use the full ROM odex? And Do I have to flash anything besides the ROM? Or can I keep everything else stock?
Click to expand...
Click to collapse
Hey there buddy, welcome to XDA (I see this is your second post).
Anyways, do you still have a custom recovery? I'm assuming you don't, since it sounds like you went all the way back to stock unrooted in order o get the update (in the future, Freeza typically has the update for Root users a week or so after the OTA release, so no need to go back to stock unrooted).
Anyways, back to your current situation. Since you most-likely have the stock recovery, you'll have to go back to being rooted with either CWM or TWRP (I prefer TWRP, but they're both good). I personally use mskip's toolkit, it's fairly straightforward. You could also follow qbking77's rooting method. He does a good job explaining how to root. Samsung hasn't locked their bootloader and don't try to in their updates, so these rooting methods stand the test of time (and updates).
Once you have a custom recovery installed (or if you already have one installed), FIRST THING to do is perform a nandroid backup. THIS IS KEY. Once you have one done, go ahead and flash Freeza's Stock Rooted ROM. I'd recommend doing a clean flash, as it's the best way to minimize the chances of errors and bugs. Just wipe system and cache and dalvik cache, and then flash the downloaded ROM. And speaking of downloading, be sure to check the md5 sum of the download before you flash. Most problems with the stable ROMs here on XDA stem from bad downloads.
You can also check out other ROMs. I won't go too crazy on advertising here, but scroll through these two sub-forums, Android Development and Original Android Development. I've enjoyed most ROMs I've tried.
Hope this helps!

ok
topherk said:
Hey there buddy, welcome to XDA (I see this is your second post).
Anyways, do you still have a custom recovery? I'm assuming you don't, since it sounds like you went all the way back to stock unrooted in order o get the update (in the future, Freeza typically has the update for Root users a week or so after the OTA release, so no need to go back to stock unrooted).
Anyways, back to your current situation. Since you most-likely have the stock recovery, you'll have to go back to being rooted with either CWM or TWRP (I prefer TWRP, but they're both good). I personally use mskip's toolkit, it's fairly straightforward. You could also follow qbking77's rooting method. He does a good job explaining how to root. Samsung hasn't locked their bootloader and don't try to in their updates, so these rooting methods stand the test of time (and updates).
Once you have a custom recovery installed (or if you already have one installed), FIRST THING to do is perform a nandroid backup. THIS IS KEY. Once you have one done, go ahead and flash Freeza's Stock Rooted ROM. I'd recommend doing a clean flash, as it's the best way to minimize the chances of errors and bugs. Just wipe system and cache and dalvik cache, and then flash the downloaded ROM. And speaking of downloading, be sure to check the md5 sum of the download before you flash. Most problems with the stable ROMs here on XDA stem from bad downloads.
You can also check out other ROMs. I won't go too crazy on advertising here, but scroll through these two sub-forums, Android Development and Original Android Development. I've enjoyed most ROMs I've tried.
Hope this helps!
Click to expand...
Click to collapse
Ok, just out of curiousity... Before I took the OTA i was rooted 4.1.1 stock with stock recovery. Is there any way to do it the same? The method I used before was this [HOWTO] [ROOT] No Tripping Flash Counter [SPR L710VPBLJ7] JB 4.1.1. It was super quick and easy.

Monoclypsus said:
Ok, just out of curiousity... Before I took the OTA i was rooted 4.1.1 stock with stock recovery. Is there any way to do it the same? The method I used before was this [HOWTO] [ROOT] No Tripping Flash Counter [SPR L710VPBLJ7] JB 4.1.1. It was super quick and easy.
Click to expand...
Click to collapse
Yeah, that same method should work. I personally like the custom recoveries, but understand your desires to leave it at stock recovery (not triggering the flash counter).
Like I mentioned before, Samsung hasn't (and most likely won't) locked their bootloaders, so any rooting method that has worked in the past should work in the future. Just make sure to read the last 3-4 pages of the thread for whatever method you're trying to use to see if there are any issues. I know an earlier version of mskip's toolkit was having issues with JB for a little bit (it's updated now).

Well I'm gonna give it a shot. Ill let you know how it turns out.
Sent from my SPH-L710 using xda app-developers app

Just went with cf autoroot. Worked fine.
Sent from my SPH-L710 using xda app-developers app

I've got a problem I installed the OTA and now I cant boot into android. Its stuck on starting apps. I have the stock recovery. How can I fix this?. What do I do? I can get to ODIN download mode. *edit** can get into safemode too. And I now have a custom recovery installed.
I still dont know what to do from here. How do I flash the downloaded rom because the new file I downloaded seems to be a zip and can only be flashed with CWM not ODIN. I cant place it in the right directory of my phone to do that.

jkj said:
I've got a problem I installed the OTA and now I cant boot into android. Its stuck on starting apps. I have the stock recovery. How can I fix this?. What do I do? I can get to ODIN download mode. *edit** can get into safemode too. And I now have a custom recovery installed.
I still dont know what to do from here. How do I flash the downloaded rom because the new file I downloaded seems to be a zip and can only be flashed with CWM not ODIN. I cant place it in the right directory of my phone to do that.
Click to expand...
Click to collapse
I replied to your thread. I hope it works for what you need.

Sprint S3 OTA Update Question :/

Okay, I know I am probably asking a dumb question, my S3 from Sprint has 4.1.1 and I rooted the clockworkmod way that it showed on this link
http://forum.xda-developers.com/show....php?t=1743780 and in the video. Basically I used Odin and then used the clockworkmod file. I am not sure but from what I read this is a clockworkmod recovery? But all I did was a basic root and everything looks as always (same as sprint no custom rom etc) I just wanted to root for the tethering. Now I just received an update and it keeps popping up as a system update (I am not sure if its to 4.1.2 or 4.2 but, If I run it, will it crash my phone, do I need to temp unroot? or unroot and then update? Is there a step by step on how to update to to the latest without brick after or is it safe to just upgrade... If anyone has any links on this forum that answers this?
(used Odin and clockwork mod to root...just to use free tethering.)

Check the "everything ota" link in my sig

acostaae90 said:
Okay, I know I am probably asking a dumb question, my S3 from Sprint has 4.1.1 and I rooted the clockworkmod way that it showed on this link
http://forum.xda-developers.com/show....php?t=1743780 and in the video. Basically I used Odin and then used the clockworkmod file. I am not sure but from what I read this is a clockworkmod recovery? But all I did was a basic root and everything looks as always (same as sprint no custom rom etc) I just wanted to root for the tethering. Now I just received an update and it keeps popping up as a system update (I am not sure if its to 4.1.2 or 4.2 but, If I run it, will it crash my phone, do I need to temp unroot? or unroot and then update? Is there a step by step on how to update to to the latest without brick after or is it safe to just upgrade... If anyone has any links on this forum that answers this?
(used Odin and clockwork mod to root...just to use free tethering.)
Click to expand...
Click to collapse
You need stock recovery to install the update otherwise your good to go
Sent from my SPH-L710 using xda premium

Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

How to UpDate Modified Device?!

Hello,
I have Galaxy S3 running 4.1.1, i have perviously
rooted it. After that i done a Factory Rest to the Device,
then tried to UpDate it to the latest Version!
But it always tells me that this device is modified!
What i want is to Completely REMOVE the Root,
then UPDATE it to the latest version? Please HELP!

DaYiM said:
Hello,
I have Galaxy S3 running 4.1.1, i have perviously
rooted it. After that i done a Factory Rest to the Device,
then tried to UpDate it to the latest Version!
But it always tells me that this device is modified!
What i want is to Completely REMOVE the Root,
then UPDATE it to the latest version? Please HELP!
Click to expand...
Click to collapse
As long as you have a custom recovery (either CWM or TWRP), you will not be able to update. You could go back to 100% stock unrooted and then update, but this is not necessary and you'll be doing a lot more steps. More steps means more chances to mess something up.
Good news is that you can just install the stock Rom. Freeza always updates his thread with the most recent Stock Rooted Rom. A lot of times he comes out with it even before I get the OTA from Sprint. All you have to do is flash it in TWRP or CWM. In case you're not familiar with the procedure for doing this, please see this linked post.
Finally, OTAs are fairly common, so check out CNexus' thread on OTAs.

DaYiM said:
Hello,
I have Galaxy S3 running 4.1.1, i have perviously
rooted it. After that i done a Factory Rest to the Device,
then tried to UpDate it to the latest Version!
But it always tells me that this device is modified!
What i want is to Completely REMOVE the Root,
then UPDATE it to the latest version? Please HELP!
Click to expand...
Click to collapse
If you want to go back to stock completely, you will need to odin the tar file and the latest triangle away. This will set your binary and get you back to normal and then odin the stock tar. This will put you back to completely stock with a stick recovery. You should be able to update from there. There are several links to the info you need.
Sent from my SPH-L710 using Tapatalk 2

4_Weasel said:
If you want to go back to stock completely, you will need to odin the tar file and the latest triangle away. This will set your binary and get you back to normal and then odin the stock tar. This will put you back to completely stock with a stick recovery. You should be able to update from there. There are several links to the info you need.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
They don't necessarily have to use Odin and Triangle Away. Here is a thread for a recovery-flashable zip which will reset their counter and restore them back to unrooted stock.
That being said, if the only reason they want to go back to stock is to take the update, it's entirely unnecessary. Like I said before, the more steps they have to take, the more chances they have to mess something up (especially when it comes to Odin and Download mode, in my opinion). If they want to return to stock unrooted for another reason, the easiest way is to use the flashable zip.

Thanks alot for all of your help

Unroot to accept update

Hi,
I have a rooted Sprint GS3, running the stock ROM with just one or two root based apps. Do I need to unroot to accept the OTA update? If so, how do I go about doing that?

TheSapient said:
Hi,
I have a rooted Sprint GS3, running the stock ROM with just one or two root based apps. Do I need to unroot to accept the OTA update? If so, how do I go about doing that?
Click to expand...
Click to collapse
if you would like to run a 4.3 stock ROM, there are a couple in the development section that you can choose from without having to run the 4.3 boot loader that contains KNOX. That way you don't have to go through the unroot process to accept the OTA.

jdelano said:
if you would like to run a 4.3 stock ROM, there are a couple in the development section that you can choose from without having to run the 4.3 boot loader that contains KNOX. That way you don't have to go through the unroot process to accept the OTA.
Click to expand...
Click to collapse
Thanks. I think the preference is to accept the OTA. If we need to unroot, we'll do that if we can figure out how. Sorry for being a little vague. I'm trying to help someone else out.

ok, you can go here Restore to unrooted MD4 follow that and you're good to go

I was stock rooted with clockwork recovery.
Took the OTA without unrooting with no problems at all, just had to re-root when it was done.

dotNETProgrammer said:
I was stock rooted with clockwork recovery.
Took the OTA without unrooting with no problems at all, just had to re-root when it was done.
Click to expand...
Click to collapse
Really? I thought it was always a bad idea with a custom recovery. Maybe we will try it rooted as well. Thanks.

Every other time I've tried it would download, but just wouldn't flash the OTA.
This time, it did. Surprised me.

Re
I got the update notification today when i woke up and when i clicked the restart and install it went to recovery mode, i panicked and clicked reboot (honestly still dont know what to do),
and restarted the phone without updating
I'm running stock 4.1.2 with just 2 root apps (superuser) and tatanium backup, how can i update ?
thanks

mjkubba said:
I got the update notification today when i woke up and when i clicked the restart and install it went to recovery mode, i panicked and clicked reboot (honestly still dont know what to do),
and restarted the phone without updating
I'm running stock 4.1.2 with just 2 root apps (superuser) and tatanium backup, how can i update ?
thanks
Click to expand...
Click to collapse
Relax . You do not have to update. You do not have to lose Root. Check out THIS thread. It will explain a few things to you in detail about Updates, and how to stop the update nag. If you want to update to the latest TW 4.3 Stock Rooted, check out the thread HERE. Just make sure you read, and read again before doing anything. Also make sure to download the correct Rom. There are several versions on the thread.

prboy1969 said:
Relax . You do not have to update. You do not have to lose Root. Check out THIS thread. It will explain a few things to you in detail about Updates, and how to stop the update nag. If you want to update to the latest TW 4.3 Stock Rooted, check out the thread HERE. Just make sure you read, and read again before doing anything. Also make sure to download the correct Rom. There are several versions on the thread.
Click to expand...
Click to collapse
Thanks for the answer.
I actually want to update to stock 4.3, and I was trying to achieve that by getting the OTA update.
And i was wondering if i can still do that?
If I simply can't then I'll just go to CM instead of getting other rooms since I used to have them with my old HTC.
Thanks again

If you want completely Stock Rooted 4.3, it's the second link I posted for you. It's the Stock, Rooted, Factory Rom, with Knox removed. All done by CNexus . Just be sure to read before doing anything. As there are several versions posted. I would highly suggest going this route instead of taking the OTA update. Once you take the OTA you will have Knox, and a different bootloader.
TEAM MiK MikROMs Since 3/13/11

Thanks a lot man, I'm having a problem installing the ROM, I'm getting assert error (status 7) error when trying to install the odexed rom,
I have just updated my CWM to 6.0.4.5
Sorry I cant reply to the thread directly, need 10 posts to be able to do so.
MJ
edit: now it's stuck on boot loop
edit: I downloaded the original recovery rom and installed it from ordin, then updated phone through kies. it's all good now.