Related
After hours of waiting for answers from Samsung both online and over the phone, nobody in the technical department has any idea what AllShare Cast does or what it is capable of doing (if anything). I have the Samsung Galaxy SIII SPH-L710 from Sprint and a Samsung UN55C7000 LED Smart tv, and a Samsung HTC-C6930 3D bluray player. I can connect all devices via allshare and share videos photos and music but if I try to activate the Allshare Cast via settings menu on the Galaxy SIII it proclaims that no devices are found. In the allshare settings menu on the tv it shows the phone is allow to share screen images however I am unable to get the phone to recognize the tv via allshare cast. Their is very limited information about connecting these devices without the allshare dongle offered by Samsung because it is my understanding with a Samsung smart tv that is capable of allshare then the dongle would be pointless so please any help you can provide to help me mirror the images from my phone to the tv without the allshare dongle or without additional cords/accessories.
Allshare cast is basically a service that mirrors whatever is on your phone to your TV.
I don't think you can use AllShare cast with a smart TV since many people have tried and the TV did not show up. They also didn't even add the AllShare cast menu option until after the dongle was released, so I doubt any compatibility with smart TVs was intended.
Samsung would rather have you pay more and also buy the dongle which is pretty much your only option if you want to mirror the phone to the TV. There are still many other solutions for just sharing movies/pictures to the TV that are free.
yousefak said:
Allshare cast is basically a service that mirrors whatever is on your phone to your TV.
I don't think you can use AllShare cast with a smart TV since many people have tried and the TV did not show up. They also didn't even add the AllShare cast menu option until after the dongle was released, so I doubt any compatibility with smart TVs was intended.
Samsung would rather have you pay more and also buy the dongle which is pretty much your only option if you want to mirror the phone to the TV. There are still many other solutions for just sharing movies/pictures to the TV that are free.
Click to expand...
Click to collapse
Where is the option at? I have been waiting for this option to appear, but I still do not seem to have it.
SilverTipp said:
Where is the option at? I have been waiting for this option to appear, but I still do not seem to have it.
Click to expand...
Click to collapse
You need oneof the newer (newest?) firmwares to have the Allshare Cast function under Settings, More Settings.
The if rooted iu also need Triangle Away (and the you have to "fiddle" a bit to get it working).
But mine was stable last night. It is a bit of a Timing thing (pressing the rest button on the dongle and then turn on allshare cast, etc). Also sometimes yu have to restart the phone.
There is a firmware update in the Samsung app store for the allshare cast dongle, available today. So far, there is a rapid connection established to the unit, stable. Sound issues also are resolved so far. Great update.
Hey Guys,
I noticed that my wife's Galaxy Note II only has the "Allshare Play" installed on her phone.
I have the original Galaxy Note and I have "Allshare" icon.
I like the Allshare app on my original Note and my wife likes it too. So far, we use iMediaShare to do it but we want to give the Allshare app a try.
Anybody knows where I can find the installer for it? or is it even compatible with the Note 2?
Thanks!
bump please
You can turn on Allshare using toggle in pull down.
The problem is that apps a mess- Connectivity issue with device freeze on ATT version so you might want to take pass on using until updated.
sling said:
You can turn on Allshare using toggle in pull down.
The problem is that apps a mess- Connectivity issue with device freeze on ATT version so you might want to take pass on using until updated.
Click to expand...
Click to collapse
Thanks! I think this is Allshare but maybe a different version because it is different compared to my original Note. In my original note, when i open "
AllShare" (not AllShare Play), I can browse from my phone and display it on my Samsung TV.
This time (with Note 2 - AllShare Play), it is the other way around. I can only access videos/music/pictures from the Allshare option from the TV.
Then again, imediashare does the same function as the old AllPlay.
I'm wondering if there is an APK around?
I got a notice to download the "AllshareCast Dongle S/W Update" to version LJ02 today. I don't have an AllshareCast dongle and I didn't even know that this app was installed on my phone. I'm wondering why they've pushed it out to everybody (I assume), since I imagine that only a tiny number of people have the app. Seems like it would make sense to install it only for people who actually have the dongle.
I'm thinking about uninstalling or freezing it. Has anybody else received it? Any thoughts?
I received the update last night around 130 am eastern........ Had no clue what it was. I am going to delete in a few minutes
Sent from my SAMSUNG-SGH-I747 using xda premium
even after update not clear it really updated the dongle.. no real way to tell.. still get system crash after connecting to the dongle. in lh1 firmeware.
lgkahn said:
even after update not clear it really updated the dongle.. no real way to tell.. still get system crash after connecting to the dongle. in lh1 firmeware.
Click to expand...
Click to collapse
What exactly is it
Sent from my SAMSUNG-SGH-I747 using xda premium
DerekPradoFLA said:
What exactly is it
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
It's supposed to allow the GS3 to update the software on the Allcast dongle that you can attach to TVs and such for device mirroring.
Sir_Brizz said:
It's supposed to allow the GS3 to update the software on the Allcast dongle that you can attach to TVs and such for device mirroring.
Click to expand...
Click to collapse
The update is showing as not compatible with my SGS3 if I look at it on the Play Store. Dunno if it's a region thing or the fact I'm rooted with stock?
I'm keen to try this update on my Allshare dongle. Would anyone be able to extract the APK for this update?
skuffle said:
The update is showing as not compatible with my SGS3 if I look at it on the Play Store. Dunno if it's a region thing or the fact I'm rooted with stock?
I'm keen to try this update on my Allshare dongle. Would anyone be able to extract the APK for this update?
Click to expand...
Click to collapse
Are you on LH9? It seems to only work on LH9 and LI5.
It's not an ATT GS3, so it's not got that firmware on it, but is the latest stock for my region, as far as I know (UK).
I was hoping the APK alone might still work, as it appears to be updating the Allcast dongle itself, rather than being tied to anything on the phone, hardware-wise.
Perhaps Samsung are rolling it out to a select few 'test' firmwares first? I believe I'm on LJ4, but I'm not up on Samsung's firmware terminology - not needed to really stray from rooted stock on this phone.
If you're able to extract the APK, it would be much appreciated
Sent from my GT-I9300 using Tapatalk 2
skuffle said:
It's not an ATT GS3, so it's not got that firmware on it, but is the latest stock for my region, as far as I know (UK).
I was hoping the APK alone might still work, as it appears to be updating the Allcast dongle itself, rather than being tied to anything on the phone, hardware-wise.
Perhaps Samsung are rolling it out to a select few 'test' firmwares first? I believe I'm on LJ4, but I'm not up on Samsung's firmware terminology - not needed to really stray from rooted stock on this phone.
If you're able to extract the APK, it would be much appreciated
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I will see if I can get it.
The developers email is s[email protected]. If that doesn't ring alarm bells I'm not sure what would..
z2k said:
The developers email is [email protected]. If that doesn't ring alarm bells I'm not sure what would..
Click to expand...
Click to collapse
This is a legitimate Samsung update and it is a part of the function that allows you to share the screen with Dlna enabled devices such as blue ray players, wdtv (and other streaming boxes) and hdtv with the function.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
stan.s said:
This is a legitimate Samsung update and it is a part of the function that allows you to share the screen with Dlna enabled devices such as blue ray players, wdtv (and other streaming boxes) and hdtv with the function.
Click to expand...
Click to collapse
Are you sure about that? What you're describing sounds like "AllShare Play" which is a completely different app. Where did you get your information that this app has some connection to DLNA?
I have been using the all share dongle. It is just as described as above. I mirror my phone thru the dongle to and TV with a HDMI port. Or Samsung devices. Play videos games whatever. All share play let's you remote control devices from your phone. All share dongle does work thru some type of dlna service from what I read on Samsung site and other places.
I was using this feature before the update was put out. It now shows up as a installed app. Before the update it was just something you could turn on in settings and still is.
It's the pre configured scan portion for the $90 wifi dongle that you buy to connect to hdmi port on projectors and hdtv displays and or the software for your computer that allows you to share via wifi or Internet.
I bought the MHL connection and carry a cable so when I am in hotels I watch what I want (netflix, Hulu) while the phone charges.
But the address of the developer is legit.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
stan.s said:
It's the pre configured scan portion for the $90 wifi dongle that you buy to connect to hdmi port on projectors and hdtv displays and or the software for your computer that allows you to share via wifi or Internet.
I bought the MHL connection and carry a cable so when I am in hotels I watch what I want (netflix, Hulu) while the phone charges.
But the address of the developer is legit.
Click to expand...
Click to collapse
I'm sure that the update is legit. I just want to avoid confusion and misinformation about what it's for:
The Allshare Cast Dongle app supports the Allshare Cast Dongle
The Allshare Play app provides DLNA connectivity to DLNA-capable devices
I believe that the Allshare Cast Dongle does not use DLNA and that this update has no relationship to the Allshare Play app or to DLNA capability. If anybody has good evidence to the contrary, please post it.
That being said, my guess is that this new update being pushed out is useless to the great majority of us who don't have the dongle.
I'm pretty sure All Share Cast is Samsung's version of Miracast.
Sir_Brizz said:
I'm pretty sure All Share Cast is Samsung's version of Miracast.
Click to expand...
Click to collapse
That's exactly what it is, I don't think the dongle uses DLNA at all.
I've found that this update has been changed to be compatible with my phone (stock UK GS3) over the last few days. It originally was shown as not compatible.
It basically prompts you to update your Allshare Cast dongle firmware when you next connect to it. It updates the dongle firmware - wirelessly - to version LJ02, which appears to have made the dongle connection much more stable, and quicker to establish.
OK, so I installed the update, then uninstalled it when I saw that it was useless for me. Now, I am getting a perpetual update notice in Google Play. Does anybody know a way to make the update notice go away without actually installing the app? The only way I can think of is to install it and then freeze it, but that seems like a waste.
stan.s said:
It's the pre configured scan portion for the $90 wifi dongle that you buy to connect to hdmi port on projectors and hdtv displays and or the software for your computer that allows you to share via wifi or Internet.
I bought the MHL connection and carry a cable so when I am in hotels I watch what I want (netflix, Hulu) while the phone charges.
But the address of the developer is legit.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Why do you believe that the email address is legit? If you go to the "Samsung Mobile Print" app in google playstore the developers email is mprint.sec@samsung.com
z2k said:
Why do you believe that the email address is legit? If you go to the "Samsung Mobile Print" app in google playstore the developers email is mprint.sec@samsung.com
Click to expand...
Click to collapse
I just had a quick back and forth with Samsung. It is Not a official app. All official app can be found at www.Samsungapps.com.
Edit: seems that Samsung isn't sure it is or not.... They talked with someone else who says that it is valid. XDA has it marked as bloatware that can be removed.
Edit2: Lookout Security says they've been asked about it before and "We have encountered this in the past and Samsung has stated that this is their app via our contact." I'm requesting it be confirmed.
Edit3: A second person at Samsung support says it's not official and a 3P app.
It CAN be un installed with TI. First detach it from the market and then uninstall. It's actual name is com.sec.fwupgrade so don't be alarmed when it says that. I will be sending it to a couple of security vendors to include in malware lists and questioned Samsung why they have not had the app removed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
It appears that regardless of the ROM or kernel, if your phone is rooted then the Allshare Cast Wireless Hub will not work. I've searched through nearly every Rom thread in the development section and I couldn't find anyone that has it working. I've tried resetting the flash counter to 0 via Triangle Away and tried using the stock rom and kernel to no avail. The wireless hub was a Christmas gift from my mother and I don't have the heart to take it back because as it stands now it's a $70 paper weight. I looked through the rules and it doesn't appear that these types of threads are against the rules. I'm hoping that someone can find a fix for this that will make it work on rooted phones. I'm even willing to send out my wireless hub to a developer if they don't have one so they can try to fix it.
1. jhoffy22 - $10
2.
3.
4.
5.
jhoffy22 said:
It appears that regardless of the ROM or kernel, if your phone is rooted then the Allshare Cast Wireless Hub will not work. I've searched through nearly every Rom thread in the development section and I couldn't find anyone that has it working. I've tried resetting the flash counter to 0 via Triangle Away and tried using the stock rom and kernel to no avail. The wireless hub was a Christmas gift from my mother and I don't have the heart to take it back because as it stands now it's a $70 paper weight. I looked through the rules and it doesn't appear that these types of threads are against the rules. I'm hoping that someone can find a fix for this that will make it work on rooted phones. I'm even willing to send out my wireless hub to a developer if they don't have one so they can try to fix it.
1. jhoffy22 - $10
2.
3.
4.
5.
Click to expand...
Click to collapse
I'll put in $5
I had one for a week before returning it to Amazon. It wasn't reliable for me. I seem to remember rooting being ok. However, the Rom and recovery would need to be stock. Maybe I remember wrong.
Sent from my SPH-L710 using xda app-developers app
I'll match you hoffy, I would love to see the hub reliably fixed for our s3's without going back to stock.
I can only match you frustration. I have spent many hours trying myself and researching how to fix this only to find that it appears to be a problem within the kernel its self. With the Rom, kernel, and everything stock it works. I have tried on many threads to see if we could get a dev to pick this up with no avail. We have some great kernels out there and besides who wants to stay 100% stock or let's face it why would we be on Xda forums. I would be willing to donate as well. Their has to be some way to resolve the issue.
jhoffy22 said:
It appears that regardless of the ROM or kernel, if your phone is rooted then the Allshare Cast Wireless Hub will not work. I've searched through nearly every Rom thread in the development section and I couldn't find anyone that has it working. I've tried resetting the flash counter to 0 via Triangle Away and tried using the stock rom and kernel to no avail. The wireless hub was a Christmas gift from my mother and I don't have the heart to take it back because as it stands now it's a $70 paper weight. I looked through the rules and it doesn't appear that these types of threads are against the rules. I'm hoping that someone can find a fix for this that will make it work on rooted phones. I'm even willing to send out my wireless hub to a developer if they don't have one so they can try to fix it.
1. jhoffy22 - $10
2.
3.
4.
5.
Click to expand...
Click to collapse
I might be misunderstanding the purpose of the hub - AllShare used to be a version of media streaming protocol, allowing devices like Xboxes and bluray players to stem media from your phone. Is the hub supposed to be a way of adding that capability to tvs that don't have it built in?
Or is it supposed to allow full screen sharing? (As in being able to see your home screen or play Angry Birds on your big screen, for example)
Sent from my SPH-L710 using xda app-developers app
styles420 said:
I might be misunderstanding the purpose of the hub - AllShare used to be a version of media streaming protocol, allowing devices like Xboxes and bluray players to stem media from your phone. Is the hub supposed to be a way of adding that capability to tvs that don't have it built in?
Or is it supposed to allow full screen sharing? (As in being able to see your home screen or play Angry Birds on your big screen, for example)
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Yes. It has an HDMI out to TVs that are not Samsung Smart TVs.
http://www.samsung.com/us/mobile/cell-phones-accessories/EAD-T10JDEGSTA
I have a Samsung smart tv, and I can't figure out how to make my Galaxy note show it's screen directly. It does link DNLA as photos or videos but then in simple sequential mode with no apps to control it with.
Sent from my SGH-T889 using Tapatalk 2
I'm not a programmer so I don't know what the difference might be. But I got a Samsung BD-E6500 blue-ray player for X-mass and I am able to stream videos and pictures from my phone using Allshare. I have a rooted S3 running Wicked Sensations ROM. The only modification I had to make to my phone was reinstalling my Samsung account on the phone.
Hope this info helps point somebody in the right direction.
jpnelson40 said:
I have a Samsung smart tv, and I can't figure out how to make my Galaxy note show it's screen directly. It does link DNLA as photos or videos but then in simple sequential mode with no apps to control it with.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
DLNA only does media streaming, not screen sharing.
buckeye_jeff said:
I'm not a programmer so I don't know what the difference might be. But I got a Samsung BD-E6500 blue-ray player for X-mass and I am able to stream videos and pictures from my phone using Allshare. I have a rooted S3 running Wicked Sensations ROM. The only modification I had to make to my phone was reinstalling my Samsung account on the phone.
Hope this info helps point somebody in the right direction.
Click to expand...
Click to collapse
The difference is that with media streaming, the file is played by the device being streamed to (streaming basically means that the file is played as it is downloaded, rather than waiting for the whole file to transfer before starting playback). The media must be prerecorded, so live interaction with an app is impossible (and tvs and bluray players have no idea what to do with an apk file).
Screen sharing is more like connecting a camera to your tv and pointing it at your phone's screen - the phone does all of the processing, which is why you can see the android interface and all of your apps in real time. It's basically like your phone is the computer and the tv is just the monitor.
Sent from my SPH-L710 using xda app-developers app
styles420 said:
DLNA only does media streaming, not screen sharing.
The difference is that with media streaming, the file is played by the device being streamed to (streaming basically means that the file is played as it is downloaded, rather than waiting for the whole file to transfer before starting playback). The media must be prerecorded, so live interaction with an app is impossible (and tvs and bluray players have no idea what to do with an apk file).
Screen sharing is more like connecting a camera to your tv and pointing it at your phone's screen - the phone does all of the processing, which is why you can see the android interface and all of your apps in real time. It's basically like your phone is the computer and the tv is just the monitor.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Such screen sharing is just what I want. It allows you to use all the nice tools and apps on the phone, instead of the crude sequential slide shows one can see on the TV, for example. Also, sometimes I want to demo a program or show a map from my phone on the big screen, so others can see it happen (looking over one's shoulder isn't optimal!).
Allshare cast requires a additional accessories. Call a hub. It will then share your phone screen with other devices. Tv's. Cpu etc
Galaxy S 3 32gb ...Sprint
jelly bean LJ7 rooted....yahhhyuhhh
---------- Post added at 08:53 AM ---------- Previous post was at 08:51 AM ----------
Also if you want to stream go to settings. Then more settings and turn on nearby devices. Then you can stream to any wifi connected device. No hub
Needed. The hub is only for screen share
Galaxy S 3 32gb ...Sprint
jelly bean LJ7 rooted....yahhhyuhhh
i'll be glad to chip in if someone is able to fix this...
triangle away does not solve it for me either.
n7100/ARHD/perseus kernel
I just bought one today.. now i wish i would of known it didn't work on rooted phones before i spent the money. Ugh
Sent from my SPH-L710 using xda app-developers app
jpnelson40 said:
Such screen sharing is just what I want. It allows you to use all the nice tools and apps on the phone, instead of the crude sequential slide shows one can see on the TV, for example. Also, sometimes I want to demo a program or show a map from my phone on the big screen, so others can see it happen (looking over one's shoulder isn't optimal!).
Click to expand...
Click to collapse
Unfortunately, you won't be able to do that with a bluray player... If you can connect a computer to a display large enough for your needs (such as your tv), then you might be able to set up a vnc server on your phone and a vnc viewer on the computer. The setup might take some tweaking, especially to deal with screen rotation, and vnc is likely to have a slight lag... otherwise, it appears that the AllShare hub or a similar device (if one exists and is compatible) will be the only other way to do wireless screen sharing
On a semi related note, does anyone here know what the hdmi cable for the S3 will display on the external screen? In other words, does it share the screen or just media that is playing on the phone?
Sent from my SPH-L710 using xda app-developers app
I will also donate
Sent from my SPH-L710 using xda premium
Let me start off with a disclaimer: I have never used Allshare, nor do I have a hub. That being said, I would put a good chunk of money on the problem being caused by HDCP. I would recommend researching this.
Sent from my SPH-L710 using xda premium
styles420 said:
Unfortunately, you won't be able to do that with a bluray player... If you can connect a computer to a display large enough for your needs (such as your tv), then you might be able to set up a vnc server on your phone and a vnc viewer on the computer. The setup might take some tweaking, especially to deal with screen rotation, and vnc is likely to have a slight lag... otherwise, it appears that the AllShare hub or a similar device (if one exists and is compatible) will be the only other way to do wireless screen sharing
On a semi related note, does anyone here know what the hdmi cable for the S3 will display on the external screen? In other words, does it share the screen or just media that is playing on the phone?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
It will share the screen, if you have the proper cable (and 5-11 pin adapter with some older cables); I have a Galaxy Note II, and that also works well sharing the screen. One can also use DLNA features to share media, but I find that screen sharing is much more convenient, since one has all the user interface advantage of the Android apps. I also would prefer if screen sharing could be done wireless. Samsung is being coy about this issue, I think, confusing everyone with the AllShare names, keeping the descriptions vague, etc. If one can share screen wirelessly with any Samsung Smart TV, even the latest, I haven't seen any posts to verify that. Some posts seem to imply that the "dongle" is needed only for older TVs, but that seems to be incorrect (and the dongle seems not to work well in any case from my reading). I would be happy to have these conclusions refuted.
AllShare Cast HUB mirrors everything u see on ur phone on ur tv. AllShare App streams pics, videos, music. Just like IMedia Share. Mirroring and Streaming are different.
GS3 Amplified
Sprint Note 2 SPH-L900
The vid below is the only proof I was able to find of it working with a modified ROM. His kernel looks stock. I tried it with Whomp 2.6 with no luck although he is running 2.4 in this vid. I had already bought TriangleAway from PlayStore which did reset my flash counter on-screen without the resetting phone cycle it goes through otherwise but I think this was only when I had Perseus kernel or before I said yes to the MA7 update which failed anyway due to not being stock. Now that I set it back to stock kernel with stock boot loader TA will no longer visually reset my flash counter. I originally rooted with the Note2 toolkit and opted for adding the insecure boot image. I am going to try to just re-flash to complete stock and use CF auto and see how it goes. I just want to use my allshare cast dongle so I can keep the phone charged when screen sharing AND be rooted. Stupid to have to jump through so many hoops to use this dongle and some apps that only work if rooted.
http://www.youtube.com/watch?v=WeKPxZiimpo
**Update** I messed with it some more and tried to keep track of the variable steps I did to make it work for me. I left Whomp 2.6 installed and did a full wipe in stock boot-loader. I noticed after 1st boot before any updates or downloads happened that my device status reported as "normal". The 1st things I downloaded were my SuperSU Pro key and my paid Triangle Away. I ran Triangle Away which was no longer able to give an on-screen flash count in android on the stock kernel but it seems to do what it is supposed to do as it showed everything was stock in download mode. After I rebooted from the 1st run of Triangle Away I checked status which was in a long cycle of "scanning" only to end in "Modified" status. I finally got Allshare Cast to work like the vid above. I'm pretty sure you just need to check the box at the bottom for the system modified workaround in Triangle Away. Now I need to update to MA7 and see if I can still have everything work.
**Working great update** Whompasaurus 2.7.1 and stock bootloader and stock kernel. Think I may have taken the "long-cut" but I pretty much got it all working with this ROM and Triangle Away. Allshare Cast dongle is working great. Watched every episode of CHOSEN on Crackle on the TV. Somehow I broke Pie Navigation Control so I just re-installed the APK and it works again. Only thing that fails now is trying to use the ROMs wifi tether which crashes the phones Settings but at least with no lockup just a slight delay and back to normal just no launching of wifi tether. I will try to do the same for that. For now I have Klink usb that I bought a while ago.
I'm currently using an allshare cast dongle to mirror my phones display to a Pioneer Appradio2. Its an awesome setup but im stuck on a stock rooted rom because of the allshare cast. I thought I had read somewhere that someone was running CM10.1 with the allshare cast working. Can anyone confirm if it works or not?
Sent from my SAMSUNG-SGH-I317 using xda premium
mad212 said:
I'm currently using an allshare cast dongle to mirror my phones display to a Pioneer Appradio2. Its an awesome setup but im stuck on a stock rooted rom because of the allshare cast. I thought I had read somewhere that someone was running CM10.1 with the allshare cast working. Can anyone confirm if it works or not?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Yes they got it it working in one of these roms. Keep searching, i been away for a while with a stock gs3 thanks to the allshare dongle so Im back hoping they have a fix for the sprint version.
Allshare dongle with CM10.1
mad212 said:
I'm currently using an allshare cast dongle to mirror my phones display to a Pioneer Appradio2. Its an awesome setup but im stuck on a stock rooted rom because of the allshare cast. I thought I had read somewhere that someone was running CM10.1 with the allshare cast working. Can anyone confirm if it works or not?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Running the same setup as you with the Appradio and ARLiberator. I tried multiple TouchWiz roms and got a Jelly 'Beans' to work with Triangle Away. Finally I gave up and went to CM10.1. While messing around with settings, I figured out how to make this work! I'm using a VZW Galaxy SIII, so not sure if the CM build for your phone will be the same but try this:
Turn on the Allshare Cast dongle
On phone go to Settings > Display > Wireless Display
Turn Wireless Display ON
Tap on Dongle to connect
Hopefully that will get you up and running with CM10.1 and your Allshare Cast Dongle.
azndy said:
Running the same setup as you with the Appradio and ARLiberator. I tried multiple TouchWiz roms and got a Jelly 'Beans' to work with Triangle Away. Finally I gave up and went to CM10.1. While messing around with settings, I figured out how to make this work! I'm using a VZW Galaxy SIII, so not sure if the CM build for your phone will be the same but try this:
Turn on the Allshare Cast dongle
On phone go to Settings > Display > Wireless Display
Turn Wireless Display ON
Tap on Dongle to connect
Hopefully that will get you up and running with CM10.1 and your Allshare Cast Dongle.
Click to expand...
Click to collapse
You sure it works man? I have gone crazy trying with the 1 fix we got - u sure it will work for note 2
http://forum.xda-developers.com/showthread.php?t=2189755 - my thread asking for help
azndy said:
Running the same setup as you with the Appradio and ARLiberator. I tried multiple TouchWiz roms and got a Jelly 'Beans' to work with Triangle Away. Finally I gave up and went to CM10.1. While messing around with settings, I figured out how to make this work! I'm using a VZW Galaxy SIII, so not sure if the CM build for your phone will be the same but try this:
Turn on the Allshare Cast dongle
On phone go to Settings > Display > Wireless Display
Turn Wireless Display ON
Tap on Dongle to connect
Hopefully that will get you up and running with CM10.1 and your Allshare Cast Dongle.
Click to expand...
Click to collapse
I have installed CM10.1 but I don't see a Wireless Display option in the Display settings. I have yet to go out to the car to see if it only appears when the Allshare Cast is turned on so I will give that a try. Thanks for the reply. I will report back later.
inningsdefeat500 said:
You sure it works man? I have gone crazy trying with the 1 fix we got - u sure it will work for note 2
http://forum.xda-developers.com/showthread.php?t=2189755 - my thread asking for help
Click to expand...
Click to collapse
I have no problem getting the allshare cast to work with stock based roms using a stock kernel with the stock boot.img. You just have to run triangle away after flashing rom and boot.img.
I have no wireless display option in the settings>display menu using CM 10.1 for the note. Very weird that its not on the note 2 rom but it is on the s3 rom.
Sent from my SGH-I317 using xda premium
Damn worth trying. As I said I'm using a s3 so wasn't sure if it would work for you.
What if you go into settings>more.. Do you see an option there for miracast?
Sent from my SCH-I535 using xda premium
azndy said:
Damn worth trying. As I said I'm using a s3 so wasn't sure if it would work for you.
What if you go into settings>more.. Do you see an option there for miracast?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Yeah tried more but nothing. Guess I'll have to beg our devs to include the wireless display option if possible. Thanks for your help.
Sent from my SGH-I317 using xda premium
So how does this thing work? Are you supposed to connect your phone to your home wifi network to access the dongle? Do the two access each other through some sort of ad-hoc connection? I dont have home internet, I just tether from my cellphone, however I would like to start streaming hulu/netflix stuff using my cellphone to mirror the screen. Will these 2 devices be able to see each other and still use my cellular data?
UPDATE: Ok so I just grabbed one from the Verizon store to figure it out myself. Setup was a breeze, just plug the hub in, hit the button 1 time on the back (or until the LED turns blue) then go into settings/display/wireless display. You do not have to be on any kind of WiFi network, apparently the device and cellphone operate on their own independent spectrum or something. It saw the device immediately and took about 30 seconds to actually connect. Then the display started mirroring. Only problem was a little lag and some visual artifacting on screen. Enough that I'm actually taking it back for a refund, what a shame, really liked the concept.