After installing CWM the touchscreen is crazy. - Desire HD Q&A, Help & Troubleshooting

Hello to all,
Mistakenly instead of installing the CWM img for desire hd I confused and just installed another cwm (cwm 6 that I had downloaded but in fact I did not want to install) instead of putting his 5.8.1.5.
It happened that the screen has gone before in pink stripes and after in black. I went to check the PD98IMG.zip (fastboot send me an error message and I can flash .img only in this mode) and I realized the awful truth (the size of the file was different to the 5.8.1.5).
I put the correct cwm into PD98IMG.zip and I have flashed. Now the CWM is correct but the touchscreen does not work in recovery and in Android.
if I touch it, it only works on one side and if I touch in a area select the choise in another area.
I ask your help I do not know what to do. I'm kind of desperate
My DHD is in S-OFF
Sorry for my english
Best regards
Stefano

l300.ss said:
Hello to all,
Mistakenly instead of installing the CWM img for desire hd I confused and just installed another cwm (cwm 6 that I had downloaded but in fact I did not want to install) instead of putting his 5.8.1.5.
It happened that the screen has gone before in pink stripes and after in black. I went to check the PD98IMG.zip (fastboot send me an error message and I can flash .img only in this mode) and I realized the awful truth (the size of the file was different to the 5.8.1.5).
I put the correct cwm into PD98IMG.zip and I have flashed. Now the CWM is correct but the touchscreen does not work in recovery and in Android.
if I touch it, it only works on one side and if I touch in a area select the choise in another area.
I ask your help I do not know what to do. I'm kind of desperate
My DHD is in S-OFF
Sorry for my english
Best regards
Stefano
Click to expand...
Click to collapse
Try flashing a RUU to restore factory settings in fastboot. Find the information in the guide in my signature.
Sent from my GT-N7000 using xda app-developers app

glevitan said:
Try flashing a RUU to restore factory settings in fastboot. Find the information in the guide in my signature.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Hi gevitan,
Thank you very much for you support.
I took the adb_fastboot.zip (Page#40, post#396)
I took a ROM with boot.img (I have an other rom but there isn't boot.img) -(attach file)
when I start the step (5) "fastboot flash recovery recovery.img" I have the follow message: remote: not allowed.(attach file)
In the past I have used the hack-ace.cmd command for a downgrade and after change in S-OFF and root and and so for my DHD.
Now I tried also to enter in HTCDEV and if I use HTCDEV when I start "fastboot oem get_identifier_token" I have this error:
"<bootloader> [ERR] Command error!!!" -(attach file)
For step (5) (Page#40, post#396) I used the fastbool of adb_fatboot.zip.
For HTCDEV I used the fastboot.exe of android-sdk_r13-windows.zip extract in HTCDEV site
I wanted to explain the whole situation
What can I do?
Sorry for my english
Best regards
Stefano

l300.ss said:
Hi gevitan,
Thank you very much for you support.
I took the adb_fastboot.zip (Page#40, post#396)
I took a ROM with boot.img (I have an other rom but there isn't boot.img) -(attach file)
when I start the step (5) "fastboot flash recovery recovery.img" I have the follow message: remote: not allowed.(attach file)
In the past I have used the hack-ace.cmd command for a downgrade and after change in S-OFF and root and and so for my DHD.
Now I tried also to enter in HTCDEV and if I use HTCDEV when I start "fastboot oem get_identifier_token" I have this error:
"<bootloader> [ERR] Command error!!!" -(attach file)
For step (5) (Page#40, post#396) I used the fastbool of adb_fatboot.zip.
For HTCDEV I used the fastboot.exe of android-sdk_r13-windows.zip extract in HTCDEV site
I wanted to explain the whole situation
What can I do?
Sorry for my english
Best regards
Stefano
Click to expand...
Click to collapse
WTF??? I told you to flash a RUU not to unlock the bootloader, not to flash a custom rom....I told you to flash an stock firmware in order to restore the phone to factory settings. Read the guide in my signature and follow the instructions before you mess your phone.
Relock the bootloader before flashing a RUU or it won´t work...:good:

glevitan said:
WTF??? I told you to flash a RUU not to unlock the bootloader, not to flash a custom rom....I told you to flash an stock firmware in order to restore the phone to factory settings. Read the guide in my signature and follow the instructions before you mess your phone.
Relock the bootloader before flashing a RUU or it won´t work...:good:
Click to expand...
Click to collapse
About Relock the bootloader I understand that I have to use the adb tools for windows (I have windows) because I find only this documentation.
In the cmd.exe I started this command "fastboot oem lock " but I have this error message:
C:\tools>fastboot oem lock
... INFO[ERR] Command error !!!
OKAY
Do you have other rules to go in relock, please? because I haven't found other.
After I sended the command "adb devices", the answer is:
C:\tools>adb devices
List of devices attached
Without devices
after I did this command
C:\tools>fastboot devices
HT0C3R********** fastboot
I think that I don't know correct drivers file for adb. I have HTCDriver_3.0.0.021.exe and HTCDriver3.0.0.007.exe but is this the problem?
If the driver does not work, what should I install?
Thank you very much glevitan
Best regards
Stefano

l300.ss said:
About Relock the bootloader I understand that I have to use the adb tools for windows (I have windows) because I find only this documentation.
In the cmd.exe I started this command "fastboot oem lock " but I have this error message:
C:\tools>fastboot oem lock
... INFO[ERR] Command error !!!
OKAY
Do you have other rules to go in relock, please? because I haven't found other.
After I sended the command "adb devices", the answer is:
C:\tools>adb devices
List of devices attached
Without devices
after I did this command
C:\tools>fastboot devices
HT0C3R********** fastboot
I think that I don't know correct drivers file for adb. I have HTCDriver_3.0.0.021.exe and HTCDriver3.0.0.007.exe but is this the problem?
If the driver does not work, what should I install?
Thank you very much glevitan
Best regards
Stefano
Click to expand...
Click to collapse
That is correct. You won't be able to get anything in adb as you are in fastboot. ADB only works when phone is fully booted. The fastboot oem lock is correct and you should be now relocked.
Now try to flash a RUU from fastboot. your drivers are ok.

glevitan said:
That is correct. You won't be able to get anything in adb as you are in fastboot. ADB only works when phone is fully booted. The fastboot oem lock is correct and you should be now relocked.
Now try to flash a RUU from fastboot. your drivers are ok.
Click to expand...
Click to collapse
WOW..!!! :cyclops:
I read the "HTC Desire HD / Inspire Help Centre" but I don't understand well what I have to use.
I saw from Page#1, post#7 to Page#67, post#668 or "RUU (ROM Upgrade Utility):" but I'm not sure what I have to do to flash a RUU from Fastboot.
Try to be patient with me, but for someone who knows, it's easy to say "Find the information in the guide in my signature", but one that doesn't have a lot of experience is more difficult.
Can you give me, please, a link so I can understand better for the future?
I found RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
or RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65.60.29_26.14.04.28_M_release_233505_signed.exe (I don't know the difference, I think only the release)
are these the RUU that I have to flash?
My Radio is 24.14.04.28_M and HBOOT 2.00.0027
Does WWE means for Europe?
I saw that there is also "RUU_Ace_Orange_UK_1.84.61.2_Radio_12.28g.60.140f_26.05.05.27_M3_release_170856_signed.exe" and so on, but
my DHD is no brand.
"....Then boot the phone into bootloader and select Fastboot using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
Run the RUU from Windows and follow the wizard. ..." Is this the rule?
thank you very much
glevitan.
Best regards
Stefano

l300.ss said:
WOW..!!! :cyclops:
I read the "HTC Desire HD / Inspire Help Centre" but I don't understand well what I have to use.
I saw from Page#1, post#7 to Page#67, post#668 or "RUU (ROM Upgrade Utility):" but I'm not sure what I have to do to flash a RUU from Fastboot.
Try to be patient with me, but for someone who knows, it's easy to say "Find the information in the guide in my signature", but one that doesn't have a lot of experience is more difficult.
Can you give me, please, a link so I can understand better for the future?
I found RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
or RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65.60.29_26.14.04.28_M_release_233505_signed.exe (I don't know the difference, I think only the release)
are these the RUU that I have to flash?
My Radio is 24.14.04.28_M and HBOOT 2.00.0027
Does WWE means for Europe?
I saw that there is also "RUU_Ace_Orange_UK_1.84.61.2_Radio_12.28g.60.140f_26.05.05.27_M3_release_170856_signed.exe" and so on, but
my DHD is no brand.
"....Then boot the phone into bootloader and select Fastboot using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
Run the RUU from Windows and follow the wizard. ..." Is this the rule?
thank you very much
glevitan.
Best regards
Stefano
Click to expand...
Click to collapse
Do you mind if I have a look at it via teamviewer? It will be easier.
Sent from my GT-N7000 using xda app-developers app

glevitan said:
Do you mind if I have a look at it via teamviewer? It will be easier.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
There isn't problem for me. send you a mp with the code

glevitan said:
Do you mind if I have a look at it via teamviewer? It will be easier.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Hi glevitan,
I flash the RUU :good: . Now the DHD is with the ruu_ace_sense30_s_htc_wwe_3.12.405.1_radio_12.65.60.29_26.14.04.28_m_release_225512_signed
but the touchscrenn is always crazy. The calibration is incorrect and I cannot enter in the Android because the sensitive area for the choise is out.
Is there a procedure to calibrate the touchscreen from PC to Desire HD?
Also the four icons of home, search and so on are out
Thank you very much for you support Glevitan
Best regards
Stefano

glevitan said:
Do you mind if I have a look at it via teamviewer? It will be easier.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I would like to thank glevitan with great respect for his support and availability.
As an example for everyone in this forum and out, like other people like him, the reliability and humility in the person who proves it.
Now the DHD is working very well.
He flashed the original RUU through fastboot with before other commands incomprehensible by StarTrack (I think I should study a little more fastboot...).
But with flash with this RUU it was ok!!
Thank you with heart
Best Regards
Stefano Santarelli

Related

[Q] Cant get out of Bootloader anymore. Bootloader relocked - Security warning

Hello,
I have now completely made my PrimoU useless.
For weeks I try to get the CM10 from Lloir working but it never got over the booting screen. So I tried several things, but never came further. Flashing back to my first rom always worked. I tried to unlock bootloader again (thought, maybe it isn't) but it was unlocked. Therefore I tried to lock it to maybe start from scratch.
That was a big mistake, because since then, I am stuck on bootloader. On the top in pink is written "Relocked" "Security warning". No recovery, no starting to the software. I gave it up.
Can anyone help me? I only have a Mac. Is there ANY possibility to just set the whole phone back to Factory form? So no bootloader unlocking, no custom rom, no recovery? I am really thinking about changing it back to this and maybe sell it afterwards. I used HTC Desire for two years with several custom roms and everything. Always could work with it. This device is unfortunately not the same.
But at first I hope anyone can help me to get this back booting with Mac?
Thanks to you all in advance
Moved to Q&A. Please ask all questions there.
Try this ./fastboot-mac flash unlock Unlock_code.bin
You have unlocked it again
You should have it in your email...
Then download the latest boot.img and zip file from cm10 and transfer the Rom zip to your sdcard....
Check development section for cwm recovery 6...download and rename it to recovery.img
Flash it by
./fastboot-mac flash recovery recovery.img
Flash boot.img by renaming it and
./fastboot flash boot boot.img
Go to recovery and flash the cm10 zip file....
Sent from my HTC One V
shubhamchamaria said:
Try this ./fastboot-mac flash unlock Unlock_code.bin
You have unlocked it again
Click to expand...
Click to collapse
Thank you for your help! But the problem begins here. I get the message
Erkan-Ertans-MacBook:fastboot Erkan$ ./fastboot flash unlocktoken Unlock_code.bin
error: cannot load 'Unlock_code.bin'
tekillo said:
Thank you for your help! But the problem begins here. I get the message
Erkan-Ertans-MacBook:fastboot Erkan$ ./fastboot flash unlocktoken Unlock_code.bin
error: cannot load 'Unlock_code.bin'
Click to expand...
Click to collapse
Do you have the Unlock_code.bin?
soham_sss said:
Do you have the Unlock_code.bin?
Click to expand...
Click to collapse
Yes I do. I went through the whole procedure..
tekillo said:
Yes I do. I went through the whole procedure..
Click to expand...
Click to collapse
U need to put in the path of the unlock code....try this ...type the command and instead of Unlock_code.bin just drag that file onto the terminal screen....them it should work
Sent from my HTC One V
shubhamchamaria said:
U need to put in the path of the unlock code....try this ...type the command and instead of Unlock_code.bin just drag that file onto the terminal screen....them it should work
Sent from my HTC One V
Click to expand...
Click to collapse
Thank you all, I used this way:
I installed Virtualbox to use a xp system to unlock bootloader again.
After that I still wasn''t able to install CM10. Whatever I do, it always sticks at the bootscreen.
I then tried the new Modaco Vanilla Rom, and it worked without ANY problems. Now I use this for start... It seems as Jelly Bean is not possible for me...
relocked security warning
I have instaled now MAximus 4.0
i tried to instal JB Maximus 4.1
i have cidnum: HTC__032
after "relocked" i have "security warning"
i watch "Video tutorial: (thanks Flow-Wolf)"
i see that he have HBOOT 0.43
i have 1.12 is there a problem?
i tried fastboot clear cache, charging over 30% but i can't install PJ46IMG, i tried adb reboot oem-78 and i get error no device found, i have the latest Fastboot Kit V4.1, CWM 5840...
nothing i'm stucked
But i can unlock and now i came back to Maximus 4.0
What cand i do. Help!!
you got the wrong forum dude
Sent from my One V using xda premium
Your problem with CM10
The problem was probably you didn't flash the kernel because if you did then you would have to flash a stock kernel to return to your original rom. Just some advice for future reference

[Q] Totally Bricked Phone???

I have made a mistake when putting my phone back to stock i deleted everything off my phone recovery everything and the relocked the phone not thinking to put the stock recovery on first via fastboot via windows cmd now my htc one x says relocked security warning and always boots into fast boot now and i try to put the recovery image on via fastboot on windows but no luck it fails and i tryed to also dot the htc dev unlock.bin file again to try and unlock it again but that failed to do fastboot on windows knows it connected i just cant put any of the .img files across tot he phone its fails everytime please help i need my htc one x its the best phone i have ever had and i dont want to sent it for repair
thank you
George Kelsey
dannymassacre said:
I have made a mistake when putting my phone back to stock i deleted everything off my phone recovery everything and the relocked the phone not thinking to put the stock recovery on first via fastboot via windows cmd now my htc one x says relocked security warning and always boots into fast boot now and i try to put the recovery image on via fastboot on windows but no luck it fails and i tryed to also dot the htc dev unlock.bin file again to try and unlock it again but that failed to do fastboot on windows knows it connected i just cant put any of the .img files across tot he phone its fails everytime please help i need my htc one x its the best phone i have ever had and i dont want to sent it for repair
thank you
George Kelsey
Click to expand...
Click to collapse
there are several threads about this...you need to unlock again the HBOOT and then reflash the stock recovery and boot.img and then runn the right RUU for you
matt95 said:
there are several threads about this...you need to unlock again the HBOOT and then reflash the stock recovery and boot.img and then runn the right RUU for you
Click to expand...
Click to collapse
cant you link me to a guide to unlock the hboot again i swear i have tryed doing it but if you could help me to get it unlocked again i know what im doing after that.
thank you
dannymassacre said:
cant you link me to a guide to unlock the hboot again i swear i have tryed doing it but if you could help me to get it unlocked again i know what im doing after that.
thank you
Click to expand...
Click to collapse
do you still have the Unlock.ini from HTC?
if you have it then you have to type (in the folder that contains the Unlock_code.ini)
Code:
fastboot flash unlocktoken Unlock_code.bin
if you have not the file then you have to follow the step by step guide here (make sure to select: All Other Supported Models)

[Request]Guide for S-off phone

Hi guys,
I have searched a bit but havent really found a solid guide.
I just brought my gf a HOX, and I checked it was shipped with Ship S-off, CID11111111111, Hboot 1.12
Now when I looked for guides to install CMW, all the method includes unlocking at HTCdev and fastboot.
Now I understand I can skip the fastboot method with S-off, how do I flash CMW and custom roms? Do I just put in the CMW.zip fie into the sd card partition, go to stock recovery and flash it as update.zip?
My previous phones were the Defy (2ndinit method) and the droid razr (bootstrap), how do I get CMW with an S-off HOX?
Thanks all, dont flame me for not searching, I didnt find any obvious method :silly:
You should be able to flash it directly with fastboot using "fastboot flash recovery NameOfFile" command or you use one of the flash tools.
Edit: After installation of cwm you are able to install custom rom via recovery
Sent from my HTC One X using xda app-developers app
You follow every other guide, just ignoring the bit about HTCDev as you don't need it
Not skip fastboot, just skip unlocking through HTCDev. You just can flash custom recovery via Fastboot, without unlocking youre device.
Edit: Sorry guys I didn't read your above comments.
Wow its that simple? Even if it shows "locked" on the top, I can just ignore that right?
Cool thanks
Yep, as you have S-OFF so already have access to the other partitions
nameite said:
Wow its that simple? Even if it shows "locked" on the top, I can just ignore that right?
Cool thanks
Click to expand...
Click to collapse
of course it is simple! you don't even need to flash the boot.img every time you install a rom
How much would it cost to get this device s-off?
Skickat från min HTC One X via Tapatalk 2
norpan111 said:
How much would it cost to get this device s-off?
Skickat från min HTC One X via Tapatalk 2
Click to expand...
Click to collapse
If only it was possible.
Sent from my HTC One X using xda premium
matt95 said:
of course it is simple! you don't even need to flash the boot.img every time you install a rom
Click to expand...
Click to collapse
Oh I dont??? Wow this is cool, gonna try it tonight.
I will just flash recovery, back up then flash a rom as normal in CMW.
Thanks guys
ps. I got the phone S-off'ed, dunno how they did it though
Hi guys,
I got into fastboot mode, opened up CMD and type: " fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru.img"
Then it tell me
Sending....
Ok
Writing
Failed (remote: not allowed)
Then I tried again
Sending
Failed (remote: 000008)
Am I doing something wrong here? The status is "Locked" but it is S-off
I also tried fastboot oem unlock and it just freezes
Maybe they sold me something that says Ship S-off but its actually S-on?
nameite said:
Hi guys,
I got into fastboot mode, opened up CMD and type: " fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru.img"
Then it tell me
Sending....
Ok
Writing
Failed (remote: not allowed)
Then I tried again
Sending
Failed (remote: 000008)
Am I doing something wrong here? The status is "Locked" but it is S-off
I also tried fastboot oem unlock and it just freezes
Maybe they sold me something that says Ship S-off but its actually S-on?
Click to expand...
Click to collapse
you have to unlock the bootloader to flash the recovery file... use HTCDev.com to do it
matt95 said:
you have to unlock the bootloader to flash the recovery file... use HTCDev.com to do it
Click to expand...
Click to collapse
So what's the point s-off then???
You have to do it just once and from there on you can flash boot.img files from sdcard, without the computer. And you can up/downgrade your hboot as much as you like. At least I think it works that way.
Sent from my HTC One X using xda app-developers app
Will network unlocking (entering codes) for an S-on device change it to S-off?
jigners said:
Will network unlocking (entering codes) for an S-on device change it to S-off?
Click to expand...
Click to collapse
Wishful thinking, and unfortunately not. I
Sent from my HTC One X using xda premium
If you really wanted to, you could still unlock you bootloader by using the command fastboot oem unlock I believe.
Sent from my Xoom using xda app-developers app
jamjame said:
If you really wanted to, you could still unlock you bootloader by using the command fastboot oem unlock I believe.
Sent from my Xoom using xda app-developers app
Click to expand...
Click to collapse
Try that, didnt work.
But I got it figured out after reading some Chinese websites.
Basically fastboot wont work because it is still locked, but S-off means you can flash any RUU.
So I downloaded a RUU flashing tool, then just put the custom recovery.img into the RUU.zip (with nothing else inside but the android.txt file) and flashed it.
Now I have CMW and I can flash anything without having to fastboot boot.img
IF your phone is S-OFF you don't have to unlock the bootloader, you can just flash things 'out the box'. Follow guides as if you've already unlocked the bootloader
EddyOS said:
IF your phone is S-OFF you don't have to unlock the bootloader, you can just flash things 'out the box'. Follow guides as if you've already unlocked the bootloader
Click to expand...
Click to collapse
So if someone wants to install the JB firmware.zip and have a CID of 11111111, should they change their CID to a compatible one or can they just add 11111111 to the androidinfo.txt and then flash it and it'll ignore the broken signature?
What if they need to flash a boot.img seperately (a repack for example), can they do this using fastboot without unlocking it?

[Q] Bricked One X (Black screen with silver htc logo)

I have searching for a solution here for last 2 days but couldn't find one
Problem :
My one x is displaying black screen with silver "htc" logo. It does not boot in bootloader or recovery. Although fastboot commands are still running on this blackscreen.
What I did
I successfully unlocked my one x and installed paranoiandroid but when I started using it my phone began to hang and the touch was disable.
Then I read the post for getting bavk to stock using RUU. I followed these step.
- checked my phone version using "fastboot getvar version-main"
- downloaded "RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed"
- unlocked the bootloader "fastboot oem lock"
- Ran the RUU exe file.
Now the RUU is giving an error the RUU is not correct but it is the same version which I get from "fastboot getvar version-main" and now my phone is only displaying the black screen with sliver "htc" logo.
I shall be grateful if someone can provide a solution to my problem. Thank you.
try 'fastboot reboot-bootloader' or 'fastboot oem reboot-bootloader' (forgot which one).
Then try find a correct RUU to flash or just flash a custom ROM.
tomascus said:
try 'fastboot reboot-bootloader' or 'fastboot oem reboot-bootloader' (forgot which one).
Then try find a correct RUU to flash or just flash a custom ROM.
Click to expand...
Click to collapse
Thank you for the reply.
I have tried it. The command executes but the phone again boots in blackscreen with silver "htc" logo. It is not going in bootloader.
If you re-run the command fastboot getvar version-main, will it give you the same no. 2.17.707.3 ?
ckpv5 said:
If you re-run the command fastboot getvar version-main, will it give you the same no. 2.17.707.3 ?
Click to expand...
Click to collapse
Yes it is giving the same version and I have downloaded the exact RUU version still RUU fails to complete its setup stating "not correct RUU, download the correct file"
I was searching for a solution and found that RUU setup also works if the RUU version is an updated version with same region e.g x.xx.707.x.
I have downloaded RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed. Should I try this?
sherwaniusman said:
I was searching for a solution and found that RUU setup also works if the RUU version is an updated version with same region e.g x.xx.707.x.
I have downloaded RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed. Should I try this?
Click to expand...
Click to collapse
Good luck! :laugh:
tomascus said:
Good luck! :laugh:
Click to expand...
Click to collapse
No luck same error occurred.
Mind if i asking? Do u just run the RUU or u flash boot_signed.img etc etc first?
Sent from my HTC One X using xda premium
serwan said:
Mind if i asking? Do u just run the RUU or u flash boot_signed.img etc etc first?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I unlocked the bootloader and ran RUU.exe file from my computer. The setup begins and error occurs while flashing the rom image
I think you should reinstall the HBoot manually...
What CID do you have?
Is your Bootloader "relocked" ??
andyoso said:
I think you should reinstall the HBoot manually...
What CID do you have?
Click to expand...
Click to collapse
How to reinstall the Hboot?
sherwaniusman said:
I unlocked the bootloader and ran RUU.exe file from my computer. The setup begins and error occurs while flashing the rom image
Click to expand...
Click to collapse
U need to RELOCKED your bootloader.
Please google how to extract boot_signed.img , recovery_signed.img and rom.zip from RUU. After u've extract those, flash boot_signed and recovery_signed first. Then boot to recovery, flash your rom.zip and only after that u run the RUU. Give it a try.
Sent from my HTC One X using xda premium
sherwaniusman said:
How to reinstall the Hboot?
Click to expand...
Click to collapse
You should download it before...if you give me your CID pass you the correct link to download the correct "firmware.zip" that contains the HBoot.
After the downloading you should type this command twice:
fastboot flash zip firmware.zip
Click to expand...
Click to collapse
andyoso said:
You should download it before...if you give me your CID pass you the correct link to download the correct "firmware.zip" that contains the HBoot.
After the downloading you should type this command:
Click to expand...
Click to collapse
Thank you. My cidread returns HTC_044. Also I have logged into bootloader screen again. I just ran the Unlock_bin file I received during rooting my device and now my phone isn't displaying the black screen and finally entered bootloader.
The problem I figured out was my bootloader was relocked and my RUU setup failed, so I had a custom rom installed with locked bootloader. That's why the phone was bricked I wan't entering bootloader.
Now I can access my recovery as well.
serwan said:
U need to RELOCKED your bootloader.
Please google how to extract boot_signed.img , recovery_signed.img and rom.zip from RUU. After u've extract those, flash boot_signed and recovery_signed first. Then boot to recovery, flash your rom.zip and only after that u run the RUU. Give it a try.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
You don't need to extract anything from the ruu, if you have the right ruu just lock the bootloader and leave the phone there ... Start the ruu from pc with admin rights.....
Im speakung from my experiance. I have face this problem before. RUU program cant install the rom. So i have to flash everything extracted from RUU first. Only after that the RUU can install the rom. But maybe im just got lucky though.
Sent from my HTC One X using xda premium

[Q] Error 191 when using RUU - Rom not supported

G'day Guys,
I am trying to root my desire HD. currently 2.3.5
I initially followed the HTCDEV method
For my phone which downloaded the RUU program. PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe
this is for Desire HD Vodaphone australia.
I ran the RUU successfully once. It supposedly upgraded the image from 2.12.178.2 to 3.13.0.0
apon rebooting into the fastboot screen as per the HTCDEV instructions when attempting to fastboot I recieved errors saying
"no image or wrong image" or something to that effect.
at this point I went back to the drawing board and tried the HOW TO ROOT WITHOUT HACK KIT thread (http://forum.xda-developers.com/showthread.php?t=2168500) method and script for unlocking the bootloader. which downloaded the same RUU program
apon running it this time it still wished to updrade from 2.12.178.2 to 3.13.0.0 and i recieved the error
ERROR [191]: Rom is not supported
I have searched several threads with this error however none of them seemed to have a solution ie.
http://forum.xda-developers.com/showthread.php?t=2264987
I cannot locate and temporary ROM zips as per this thread below.
http://forum.xda-developers.com/showthread.php?p=21231962
EDIT Just found and am re-naming the rom zip as PD98IMG.zip then copying it to sd card root folder.
will update thread with result. apologies again
Appologies for the first thread question and its length.
Any help would be much appreciated.
Thanks and Regards
Ben
So I renamed the rom.zip file copied it to the root folder of the SD card.
booted into fast boot. updated
it said "parsing bootloader complete"
however the phone still appears to be 3.12.178.2 ...
the next step
step 8
htcdev[dotcom]/bootloader/unlock-instructions/page-3
"fastboot oem get_identifier_token"
wont run as it sits there <waiting for device>
if I run the RUU again it still says need to update to 3.13 and that its error 191 invalid rom.
help guys
slickncghia said:
G'day Guys,
I am trying to root my desire HD. currently 2.3.5
I initially followed the HTCDEV method
For my phone which downloaded the RUU program. PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe
this is for Desire HD Vodaphone australia.
I ran the RUU successfully once. It supposedly upgraded the image from 2.12.178.2 to 3.13.0.0
apon rebooting into the fastboot screen as per the HTCDEV instructions when attempting to fastboot I recieved errors saying
"no image or wrong image" or something to that effect.
at this point I went back to the drawing board and tried the HOW TO ROOT WITHOUT HACK KIT thread (http://forum.xda-developers.com/showthread.php?t=2168500) method and script for unlocking the bootloader. which downloaded the same RUU program
apon running it this time it still wished to updrade from 2.12.178.2 to 3.13.0.0 and i recieved the error
ERROR [191]: Rom is not supported
I have searched several threads with this error however none of them seemed to have a solution ie.
http://forum.xda-developers.com/showthread.php?t=2264987
I cannot locate and temporary ROM zips as per this thread below.
http://forum.xda-developers.com/showthread.php?p=21231962
EDIT Just found and am re-naming the rom zip as PD98IMG.zip then copying it to sd card root folder.
will update thread with result. apologies again
Appologies for the first thread question and its length.
Any help would be much appreciated.
Thanks and Regards
Ben
Click to expand...
Click to collapse
The top part, the one where you say RUU, that's not a RUU, that just simply updates the HBOOT.
You need to follow this guide.
Steam. said:
The top part, the one where you say RUU, that's not a RUU, that just simply updates the HBOOT.
You need to follow this guide.
Click to expand...
Click to collapse
thanks, yeah i was following that guide.
part of that guide is the "unlock bootloader" portion. I believed thats what the RUU was doing... as those were the steps i was doing.
I was trying to unlock to bootloader. which the guide states you need to do IOT continue on to the ROM steps in the guide you linked.
has anyone had success unlocking the bootloader or any ideas for my issue
thanks for the response. makes sure im on the right path,
Cheers
Ben
slickncghia said:
thanks, yeah i was following that guide.
part of that guide is the "unlock bootloader" portion. I believed thats what the RUU was doing... as those were the steps i was doing.
I was trying to unlock to bootloader. which the guide states you need to do IOT continue on to the ROM steps in the guide you linked.
has anyone had success unlocking the bootloader or any ideas for my issue
thanks for the response. makes sure im on the right path,
Cheers
Ben
Click to expand...
Click to collapse
Use a goldcard to flash a ruu that supports hboot update. That will allow you to unlock the bootloader.
Sent from my GT-N7100 using xda app-developers app
glevitan said:
Use a goldcard to flash a ruu that supports hboot update. That will allow you to unlock the bootloader.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Ok im ready to do this. got my CID... however it appears the Revskills goldcard generator is down and has been for a while
does anyone know of a current goldcard generator that is working.
EDIT:
ok its Alice down the rabbit hole at the moment.
I think I have created a gold card using this tool ... that you posted lol
http://forum.xda-developers.com/showthread.php?t=2288012
there are allot of threads asking for goldcards so hopefully this helps someone.
now i just have to work out how to ... Use a goldcard to flash a ruu that supports hboot update. That will allow you to unlock the bootloader. lol
apologies for the n00bage.
now I have a gold card. just trying to work out the next step to find a RUU that will support hboot update on htcdev
can anyone point me to an appropriate RUU? Glevitan perhaps?
thanks all for the help so far its been great
FYI I completed step 1 from this site http://forum.gsmhosting.com/vbb/f66...-os-s-off-change-imei-cid-hxc-dongle-1548982/
1.root ur phone :for root u mus unlock boot loader with htcdev/bootloader
hboot 2.00.0029 support token key for unlock bl 2.00.0027 stok not support
u must update hboot to 2.00.0029:
download this rom copy to your c:\ drive so download this dhd update hboot by behtash.rar
and run hboot update by behtash.bat in normal mode ,waiting until flash hboot complete
ok u can now unlock bl with htcdev.com\bootloader
however it would not unlock on htcdev it just sat there saying [waiting for device]
I think my fastboot program may be the issue due to it being the same 69k version that this chap had an issue with
http://androidforums.com/cdma-evo-3d-all-things-root/476366-help-w-htcdev-waiting-device.html
downloading sdk
MY current stats are
hboot-2.00.0029
radio-26.14.04.28_m
android 2.3.5
htc sense 3.0
software version 3.12.178.2
slickncghia said:
apologies for the n00bage.
now I have a gold card. just trying to work out the next step to find a RUU that will support hboot update on htcdev
can anyone point me to an appropriate RUU? Glevitan perhaps?
thanks all for the help so far its been great
Click to expand...
Click to collapse
Find what build version and main you are running by using the command in fastboot USB:
fastboot getvar all
Delete the IMEI and paste the outcome
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
glevitan said:
Find what build version and main you are running by using the command in fastboot USB:
fastboot getvar all
Delete the IMEI and paste the outcome
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
I was being a numpty and didnt have sdk installed. I have to crash tonight but will install it tomorrow. then try htcdev again,
if it dosent work i will do as suggested. if its something that simple I will feel a bit stupid. will keep you guys updated.
thanks again all for your help
Ok I have unlocked bootloader. I was being a bit of a numpty and not doing the "get identifier token" command whilst the phone was actually on fastboot... the htcdev instructions confused me.
I will keep this post open as I know i will have more problems as I go.
Thanks all for your help so far
do i have to
3. Download rooted stock rom: http://www.multiupload.nl/20T9R21IGY
(link to rom thread: http://forum.xda-developers.com/show...t=rooted+stock )
copy the ROM zip file to your SD card.
as per http://forum.xda-developers.com/showthread.php?t=2221039
or can I go straight to download a newer rom. a 4.2 or something and continue on the process
Ok, where I am at.
I have flashed the stock rooted rom as per the guide.
it works fine and has root access.
I didnt go through the process for S-OFF from step 6 onwards as I got a little lost what i needed to do as I had already done some of the goldcard steps. either way.
I am currently unlocked and rooted. with 2.3.5 stock rooted rom.
I tried to install a cryogenmod rom and jellytime rom.
as per this page http://forum.xda-developers.com/showthread.php?t=1866122
I installed them from the cwm recovery then tried to "flashboot flash boot boot.img" with their respective boot.img.
both roms didnt progress past the htc boot screen they just black screened.
can anyone hint why these roms wouldnt load? is it an s-on issue? or am i lost with the boot.img or missing another step?
i have reloaded the stock rooted image using cwm and flashboot flash boot boot.img
Thanks all
Ben
The command is "fastboot," not flashboot." Are there any errors when you run it?
bananagranola said:
The command is "fastboot," not flashboot." Are there any errors when you run it?
Click to expand...
Click to collapse
Yeah fastboot was what I was using . Typo sorry. Still not working. Should they work whilst using this method?
slickncghia said:
Yeah fastboot was what I was using . Typo sorry. Still not working. Should they work whilst using this method?
Click to expand...
Click to collapse
Again, is there an error message?
bananagranola said:
Again, is there an error message?
Click to expand...
Click to collapse
Ah appologies I am blind today.
No error msgs. Boot.IMG is coppied over as it is when I do it with the rooted stock Rom.
Just when rebooting afterwards. The phone does its .HTC flash screen for like 30 secs then it goes to a black screen (phone on) indefinitely.
The process I am using is
1 zip Rom on sdcard.
2 cwm delete user data
3 cwm install zip image from sdcard which works
4 reboot
5 fastboot USB
6 from pc: fastboot flash boot boot.IMG (extracted from Rom zip)
Am I doing anything incorrectly or missing a step.
Rooted, unlocked bootloader s-on
Thanks all
Is the phone in fastboot? What ROM? What recovery version?
bananagranola said:
Is the phone in fastboot? What ROM? What recovery version?
Click to expand...
Click to collapse
The phone was in fastboot USB
The working Rom is the one listed shoved from the full root sticky..3.12.405.1 rooted by nitr00
The 2 Roms that failed were jellytime and cryogen. Either the current or most recent stable apparently
Recovery is cwm. It's a slightly older version I think though. It was the only one I could find at the time.
Maybe 2. Something. I'll reboot now and check. Could that be an issue?
Bootloader unlocked
Hboot 2.00.0029
Radio 26.14.04.28m
Cwm recovery v 2.5.1.2
Yay just tried with the latest version of CWM and it works... FFS why wouldnt I have used the current version.
anyway I am playing with 4.2.2 jelly time now.
Thanks so much every contributor. your replies helped me keep going.

Categories

Resources