Hi Guys,
I’m stuck somewhere in the middle of root access. I was having problems with weak phone signal so I was advised to change the kernel.
I followed the procedure correctly but this led to the phone running hot, rebooting itself from time to time and occasional freezing.
So I want to start a fresh, backup some of my data files (can’t use titanium as it’s asking for root access) and then flash the saber kernel and probably also a new rom.
In Superuser the root access is green so I presume this is okay however there are no apps in the approved list… When I go to root checker or any other app requiring root they just whir and do nothing.
ROM manager tries to flash custom recovery but it just gets stuck at 100% flashing until I touch the screen
Holding up+home+power just keeps re-booting the phone without going into custom recovery and I can’t use mobile odin as it gets stuck checking root access!
I’ve been flashing roms for many years so I’ve no idea what’s going on here! Any help would be greatly appreciated,
Cheers,
Andy
I have been using the i747z ROMs for quite some time and after trying a bunch of other ROMs I always reverted back to theirs. So when their 3.0 version came out with Android 4.3 I installed it, using ClockWorkMod recovery. Right after it installed, CWM displayed a message about the boot loader and to fix it. So I went ahead and did that (Don't really remember what the message was) What I know is that I lost root. Also the phone could not connect to the mobile network, only on Wifi. So this morning, I factory reset the phone again, and attempted to root the phone with Odin with CF-Auto-Root-d2att-d2uc-samsungsghi747 (which I had used when I first rooted the phone). Now the phone doesn't boot past the 2nd samsung logo, it starts out with the Samsung logo with the blue circle around it, then the AT&T Rethink Possible and then the plain white Samsung logo. Also, the LED has a slow blue flicker.
I can get the phone into download mode and I have used Odin to attempt to load the stock firmware and the stock bootloader. But after restarting the phone I can't get past the same screen described above.
I am pretty sure this is not related to the i747z v3.0 ROM but rather something a miss with the order in which things need to start in Android. I have done some reading on that but I am not sure what I need to do to correct this soft brick situation. ( I have googled "soft brick" as well)
Any thoughts would be greatly appreciated!
mozphoto said:
I have been using the i747z ROMs for quite some time and after trying a bunch of other ROMs I always reverted back to theirs. So when their 3.0 version came out with Android 4.3 I installed it, using ClockWorkMod recovery. Right after it installed, CWM displayed a message about the boot loader and to fix it. So I went ahead and did that (Don't really remember what the message was) What I know is that I lost root. Also the phone could not connect to the mobile network, only on Wifi. So this morning, I factory reset the phone again, and attempted to root the phone with Odin with CF-Auto-Root-d2att-d2uc-samsungsghi747 (which I had used when I first rooted the phone). Now the phone doesn't boot past the 2nd samsung logo, it starts out with the Samsung logo with the blue circle around it, then the AT&T Rethink Possible and then the plain white Samsung logo. Also, the LED has a slow blue flicker.
I can get the phone into download mode and I have used Odin to attempt to load the stock firmware and the stock bootloader. But after restarting the phone I can't get past the same screen described above.
I am pretty sure this is not related to the i747z v3.0 ROM but rather something a miss with the order in which things need to start in Android. I have done some reading on that but I am not sure what I need to do to correct this soft brick situation. ( I have googled "soft brick" as well)
Any thoughts would be greatly appreciated!
Click to expand...
Click to collapse
After flashing through odin did you format data?If not try it.
Go into recovery and wipe data.
**SOLVED**
Thanks xXFl4sh, I had tried that.
Solved!
Alright where do I start? How about RTFM Some how I had missed the part about flashing a bootloader and a modem after the ROM. Not recalling having to do that before, I skipped right over it. Once the recovery CWM 6.0.3.1 was finally loaded, getting the flashing the ROM, the bootloader and the modem was easy as usual.
The key was having to use Odin to install a recovery in .tar or .tar.md5 format since I could not access a Recovery Mode on the GS3, as well as a rooted stock image (I used root66_ATT_I747UCDLK3.tar.md5 which is a rooted Android 4.1.1 for AT&T) For the recovery, I couldnt' find a .tar or .tar.md5 for ClockWorkMod (did find a utility to convert it, but didn't want to introduce another variable into the mix) so I used one from Team Win Recovery (v2.6.3.0) and with that I loaded the CWM recovery. Once all of that was in place, I proceed to factory reset, clear data, cache, system and then flash the new ROM, bootloader and modem.
In all of this I learned quite a bit about the whole process and how to narrow down possible resolutions. I still see the "Rom may flash stock recovery on boot" message after flashing either a ROM, bootloader or modem, but just backing out without answering Yes or No seems to work. Also (and this may be related, I don't see the option to restart in recovery from shutdown menu). Don't really know what that's all about for now, and honestly don't want to mess around (at least for a while)
I know the steps are general, but I hope this can help some else if they get their devices in a soft brick situation. As for the i747z v3 ROM with 4.3, I really like it, everything works (Wifi,Blutooth,tethering) and the battery seems good as well.
Thanks!
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:
kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now
How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.
I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?
any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)
Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!
my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful
Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"
hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error
Ok guys I am pretty sure I fubar'd my tablet.
I am stuck in a recovery loop. When I start the tablet it just goes back into recovery. Which if I still had TWRP I think I could still do something, but I flashed cyanogen recovery trying to flash cm13 since I cold not get anything else to work. I cannot boot into download/firmware update screen. The screen just flickers a little and goes dark.
A little background:
Started when tablet forced install of 5.0 update and I was in a recovery loop. I flashed 410 test build, rooted, flashed twrp, installed stock rooted ROM. Everything was fine. Then tablet did it again, this time I just flashed rooted ROM and factory reset. Even took the steps to fix the white lines and storage issues. Was working fine. Got home a few days ago and I was in a recovery loop again. But now I don't have the bootloader screen/download mode/firmware update screen (whatever you want to call it) so last night i tried to download cm13, Gapps and cyanogen recovery with no avail.
I can access adb on my PC while in recovery, but when I try to access ADB shell I get unauthorized something or other. Because I cannot authorize USB debugging, because ROM won't boot. I tried to flash stock rooted ROM from cyanogen recovery and it says not signed or something like that.
Does anyone have any ideas? I really think I have screwed the pooch here.
sent from a device using an app
title
if you have a stock recovery image flashing it is easy, i had a LOT of troubles with my v410 and still am working with it. i have mine rooted, just with TWRP though, i cant use xposed framework, which negates why i rooted this in the first place. anyway, through much grit and determination flash your stock image after wiping what needs to be wiped and doing all other necessary things. Then, you must download kingo root, supersu, superuser. flashify would help with the flashing i hear, but it has troubles with the v410. kingo root was an apk i managed to find buried under a million viruses on the 34th page of google..or something. rooted mine in one click, from stock to reboot to twrp root.. many glitches.
I need help myself, deleted my "Phone" system app, causing me to lose connectivity with my data plan. cant seem to restore it, and flashify nor twrp has been able to flash a custom recovery, or a backup, im at a loss.
Help? We seek the same thing.
Ok but how do I flash the stock recovery image. I can't use fastboot. ADB says I am unauthorized.
sent from a device using an app
Anyone have any other ideas?
I am at a complete loss. I am by no means a developer, but I do know my way around. I really think I have FUBAR'd this one.
Kind of stinks, I give up. Anyone want a bricked v410?
Sent from my Galaxy Tab 2 using Tapatalk