Ok this is the story.
So I see there is a new custom ROM (HTC One maXimus) with Android 4.1.1 for the One X. I decide to root it.
However the ROM forum tells me that I have to install this 'PJ46IMG.zip' containing the new HBOOT 1.23 in order for JB to run on my phone.
Following the guide, I then start to un-root my One X, first installing the recovery.img file, then re-locking the bootloader using the 'fastboot oem lock' command.
This is the ISSUE!
When I tried installing the RUU version for my One X (I matched the RUU looking at the bootloader menu Radio version), it tells me that my phone is not connected to my laptop (when it clearly is?!).
This is exactly what the bootloader menu says:
*** RELOCKED ***
Endeavoru PVT SHIP S-ON RL
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.90.13
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
My phone even says 'FASTBOOT USB'.
I can't seem to re-boot my phone as it always comes back to the bootloader, plus I get this "developer warning" message as the phone boots.
Also, whenever I try doing a fastboot command on my laptop, it's just stuck on 'waiting for device'.
IM LITERALLY STUCK GUYS! Just hoping there's someone here who knows exactly what to do
try rebooting your pc and bootloader
solution
Jamz442 said:
Ok this is the story.
So I see there is a new custom ROM (HTC One maXimus) with Android 4.1.1 for the One X. I decide to root it.
However the ROM forum tells me that I have to install this 'PJ46IMG.zip' containing the new HBOOT 1.23 in order for JB to run on my phone.
Following the guide, I then start to un-root my One X, first installing the recovery.img file, then re-locking the bootloader using the 'fastboot oem lock' command.
This is the ISSUE!
When I tried installing the RUU version for my One X (I matched the RUU looking at the bootloader menu Radio version), it tells me that my phone is not connected to my laptop (when it clearly is?!).
This is exactly what the bootloader menu says:
*** RELOCKED ***
Endeavoru PVT SHIP S-ON RL
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.90.13
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
My phone even says 'FASTBOOT USB'.
I can't seem to re-boot my phone as it always comes back to the bootloader, plus I get this "developer warning" message as the phone boots.
Also, whenever I try doing a fastboot command on my laptop, it's just stuck on 'waiting for device'.
IM LITERALLY STUCK GUYS! Just hoping there's someone here who knows exactly what to do
Click to expand...
Click to collapse
Hi, I did the exact same thing and faced the same issue. To resolve it, do one thing, just try unlock the bootloader again. And your phone will start working as before. For unlocking the bootloader you will need the Unlock_code.bin file which you used initially to unlock your bootloader. I hope you have the file. I was able to find it in my mailbox. HTC would have sent this file in email.
Let me know if I helped by clicking Thanks
So did you flash the stock boot.img before you relocked the bootloader? And your CID matched the prerequisites right?
For instructions: http://insertcoin-roms.org/2012/10/insertcoin-evolution-one-x-10-0-0-jellybean-and-sense-4-5/
Vcek said:
try rebooting your pc and bootloader
Click to expand...
Click to collapse
Hi,
I tried that but it still didn't work
sun_strings said:
Hi, I did the exact same thing and faced the same issue. To resolve it, do one thing, just try unlock the bootloader again. And your phone will start working as before. For unlocking the bootloader you will need the Unlock_code.bin file which you used initially to unlock your bootloader. I hope you have the file. I was able to find it in my mailbox. HTC would have sent this file in email.
Let me know if I helped by clicking Thanks
Click to expand...
Click to collapse
Hi,
I have found the Unlock_code.bin file, but whenever I try to flash the fastboot command, it is still stuck on 'waiting for device'
What am I doing wrong?
Try a different USB cable or different computer
tomascus said:
So did you flash the stock boot.img before you relocked the bootloader? And your CID matched the prerequisites right?
For instructions:
Click to expand...
Click to collapse
Hi,
Now I think about it, I only flashed the recovery.img
Plus, I did not have time to check the CID, because everytime I enter a command, it is just stuck on 'waiting for device'
You should have checked the CID first before you even started to do anything.
Reinstall a stock RUU and then try to unlock bootloader from there.
Got it working now !!
All I did was use a different computer and re-rooted it! Thanks for all the help guys!
Go to Fastboot
Jamz442 said:
Hi,
I have found the Unlock_code.bin file, but whenever I try to flash the fastboot command, it is still stuck on 'waiting for device'
What am I doing wrong?
Click to expand...
Click to collapse
Are you on fastboot mode. Keep volume down + power button pressed for sometime and your phone will restart in Bootloader modem, you will be HBOOT, use the up and down volume keys to select fastboot, then press power button, your phone will switch to FASTBOOT from HBOOT. When you are in Fastboot mode, try running the command for unlocking.
Let me know if I helped by cliking Thanks
Related
I have an HTC wildfire S A510b MARVEL PVT SHIP S-ON RL
HBOOT 1.09.0099
MICROP-0451
RADIO-7.57.39.15M
Android 2.3.5
HTC sense 2.1
Software 2.26.841.4
kernel 2.6.35.10
i dont know my carrier but it comes with TelestraOne app. I guess its Australian.
i need to install custom ROMs on my device to get more free space in internal memory, for that i have been trying to unlock my bootloader but i cant. i followed steps given in HTCdev.com it provided me with the unlock_code.bin but when i flash it. It doesn't happen. The file doesn't flash. can anyone help me unlock bootloader.
Could you specify the exact steps you take to flash the unlock code? And what is the error you get?
vbhtt said:
Could you specify the exact steps you take to flash the unlock code? And what is the error you get?
Click to expand...
Click to collapse
RUU for my ROM was not available on HTCdev.com so i ignored the RUU step and continued from step 1, as it was mentioned on web that if your ROM version is not present than u dont need RUU. i followed every single step mentioned on HTCdev.com, i gave them my binary ID token they sent me unlock_code.bin file on my email account. but when i try to flash that file. it stuck. nothing happens. i tried other RUU's for my model i.e. PG76120 but non works. and the unlock code that htcdev.com provided doesnt work also. it hangs when i try to flash that unlock_code.bin on my phone via cmd.exe, on web it says that it will take 5secs. i left my phone for more than 10mins. but it didnt flash.
Monay1988 said:
RUU for my ROM was not available on HTCdev.com so i ignored the RUU step and continued from step 1, as it was mentioned on web that if your ROM version is not present than u dont need RUU. i followed every single step mentioned on HTCdev.com, i gave them my binary ID token they sent me unlock_code.bin file on my email account. but when i try to flash that file. it stuck. nothing happens. i tried other RUU's for my model i.e. PG76120 but non works. and the unlock code that htcdev.com provided doesnt work also. it hangs when i try to flash that unlock_code.bin on my phone via cmd.exe, on web it says that it will take 5secs. i left my phone for more than 10mins. but it didnt flash.
Click to expand...
Click to collapse
you should not ignore ruu for your rom bcz...the original hboot doesn't support fastboot command..!
He said that he has version 2.26, that already has the unlockable bootloader .
Maybe you could try to get another unlock code?
Sent from my bowl of jelly!
vbhtt said:
He said that he has version 2.26, that already has the unlockable bootloader .
Maybe you could try to get another unlock code?
Sent from my bowl of jelly!
Click to expand...
Click to collapse
i did. i repeated the process 2 to 3 times. still having same problem. isnt there any other way to unlock bootloader?? or should i factory reset twice and than try that again?? i dont know why it stuck on "sending unlock_code.bin"
Monay1988 said:
i did. i repeated the process 2 to 3 times. still having same problem. isnt there any other way to unlock bootloader?? or should i factory reset twice and than try that again?? i dont know why it stuck on "sending unlock_code.bin"
Click to expand...
Click to collapse
Did you select 'Fastboot' by pressing <power> button on hboot menu before to type the 'fastboot' from cmd.
If you don't this then probably it wouldn't be done!!.
Senthamil said:
Did you select 'Fastboot' by pressing <power> button on hboot menu before to type the 'fastboot' from cmd.
If you don't this then probably it wouldn't be done!!.
Click to expand...
Click to collapse
i went in HBOOT by pressing power and volume down button simultaneously. i let HBOOT scan for images, there weren't any, than i selected fastboot using power button. after that i connected my phone to PC via USB cable. fastboot changed into fastboot usb. than i commanded cmd tu flash unlock_code.bin into my phone (unlock_code.bin was placed in same folder where adb.exe,AdbWinApi.dll and fastboot.exe files were placed and i opened cmd from that folder where all of these 4 files were placed) I have win7 ultimate and activated on my desktop.
do i have to copy AdbWinUsbApi.dll also ???
i have the same prob with my explorer...my wfs bootloader unlocked easily...i updated the RUU and it happened...in my explorer...once i use the command send unlock code.bin...my fone hangs nd there is a green rectangle on the side...as i remove the usb it works again...any help?
Yolo |__| said:
i have the same prob with my explorer...my wfs bootloader unlocked easily...i updated the RUU and it happened...in my explorer...once i use the command send unlock code.bin...my fone hangs nd there is a green rectangle on the side...as i remove the usb it works again...any help?
Click to expand...
Click to collapse
in folder where u put fastboot.exe, adb.exe, unlock_code.bin,adbwinapi.dll also place adbwinusbapi.dll it worked for me on my wildfire s.
Hi i have the same version on the OP .... can i flash other RUU on my phone? since i already unlocked my bootloader got S-ON ..
and its not simlock (already unlocked) what RUU shud i flash on my phone inorder to remove the bloatwares from telstra and remove carrier logo upon startup.
Hey guys,
I got my OneX in April and rooted it directly when it became possible. I was running a Sense rom the last weeks and was absolutly happy with it.
But now i saw this rom:
http://forum.xda-developers.com/showthread.php?t=1836919
JB is geat (already seen it on other devices) and I tried to flash it.
As the installation instructions told me I relocked my Bootloader. In the second I hit Return to execute "fastboot oem relock" my phone restartet to the bootloader. On the HTC Splashscreen it said something like "for development purposes only" in red below the green HTC logo (its too fast to read it carefully).
The Bootloader says the following:
Code:
*** RELOCKED ***
*** Security Warning ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.104.14
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
Apr 11 2012,02:27:11
FASTBOOT
Im not able to boot anymore, not to Android and not into recovery. Everytime i get stuck in bootloader.
I tried to relock my bootloader again, but i lost my unlock code binary file i unlocked it with (didnt recognizes that earlier -.- )
On every fastboot command it stucks at < waiting for device > and nothing happens.
Is my phone bricked or is there a chance to get it back to life?
I hope you guys can help me, my HOX and me need your help.
Thanks for taking the time
twinflyer
PS.: Im sorry for my english, Im from germany
Run the appropriate ruu!
thanks for your reply
would this one be the right one for my Unbranded EU HOX:
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.7_Radio_ 1.1204.104.14_release_259281_signed
from: android-hilfe.de/htc-one-x-forum/220176-aktuell-2-17-17-august-alle-ruus-offizielle-firmwares-stock-fuer-das-one-x.html
Or is Radio/Firmware irrelevant and just the branding has to be the right one?
Sorry for asking, just want to make everything right now
twinflyer
firmware has to be the same or higher (you can't downgrade without S-OFF)
Vcek said:
firmware has to be the same or higher (you can't downgrade without S-OFF)
Click to expand...
Click to collapse
thank you.
I Will take the latest one to be on the safe side.
twinflyer
Al right, I've downloaded the RUU.
But I cant Install it on my phone. It throws Error 170 (no connection to the phone).
As is said in the first post, fastboot commands arent working, too....
This means:
-no recovery
-no adb
-no RUU
are there any other possibillities to get my phone back to life?
twinflyer
twinflyer said:
Al right, I've downloaded the RUU.
But I cant Install it on my phone. It throws Error 170 (no connection to the phone).
As is said in the first post, fastboot commands arent working, too....
This means:
-no recovery
-no adb
-no RUU
are there any other possibillities to get my phone back to life?
twinflyer
Click to expand...
Click to collapse
maybe try another usb slot, I've had it where just swapping slots as helped when trying to fastboot
Ok, I managed to get it back to life.
The problem was too easy:
For some reason an old driver version from HTCs drivers was still in my ram (didnt know that sth like that can happen oO ). And because of that I couldn't connect to the phone via adb/fastboot. I found that problem, because the device-manager said that there is this problem with my hox.
A simple system reboot (of my computer) solved the problem.
Thanks for all your help
twinfleyr
i'm using official ruu ver 4.1. I just manage to root it as well. (by apply token method)
I found Android_Revolution_HD-One_X_31.1 from XDA which is 4.2.2 with sense5 & some optimize may apply. so I try to flash....
1. I use CW recovery made my backup b4 do this. & i just install (ARHDOX_31.1) zip from sd..
2.when I boot up I got 1st problem which i wait for 30 min still the screen keep me "HTC quietly brilliant"... & I tried reboot few times the problem still there. No even show me "ONE X" logo so I guess I have to do something with hboot.
3.i checked my hboot ver is 1.36(my id is HTC__044) before i flash that rom. so i thought i dont need to download & update hboot. but eventually i try to update the firmware which it same version 1.36 suggested.
4.i follow the step from youtube lesson but i just manage to relock by "fastboot oem lock" & i got ... "FAILED (command write failed (Unknown error))" from cmd. but there's still my HTC ONE X relock! (I'm not too sure in my memory when is it the error first appear.)
5.i realized that may be a problem to me because i can't use recovery to load my backup. & I tried fastboot devices, i got:
List of devices attached
SH24KW117994 fastboot
but when i get back to hboot i got this:
"failed to open usb master mode"
I tried adb devices i got:
SH24KW117994 offline
i can't use adb command, but my fastboot always get me this error.
when i tried "fastboot oem rebootRUU" i got "... FAILED (status read failed (Unknown error))" but after that "finished. total time: 8.300s" & i got silver htc & black baground mode. but i tried "fastboot flash zip firmware.zip" it show me "sending 'zip' (12875 KB)..." hang on this message but nothing further.
6. I checked my driver it's work ok(maybe) in fastboot mode. "My MTC" in Android USB Devices. BUT WHEN I TURN IN TO HBOOT shown "Unknown Device" in Universal Serial Bus Controllers. (No more Android USB Devices).
on the onex screen, it showns
*** RELOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.36.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
SD Checking...
Failed to open usb master mode
[Preload] Failed to open usb master mode
loading PJ46IMG.zip image...
Failed to open usb master mode
Please plug off USB
7. I tried to download the latest HTC Sync Manager, HTC Driver 4.0.1.002, HTC Driver 4.3.0.001 & HTC Driver 3.0.0.007 but still same problem.
Anyone able to help?
ps: sorry for my poor english.
Did you fastboot flash the boot.img after flashing the ARHD zip? If not, your device won't boot!
Gesendet von meinem HTC One X mit Tapatalk 4
Your device will boot without the new boot.img, you just won't be able to communicate with your device, eg: no signal or WiFi or bluetooth. I have experienced issues like the one you are having and probably worse, can you get into the bootoader? If so select fastboot and in your cmd window type: fastboot erase cache
If all goes well you should be able to get it booting. If its still stuck try reflashing your rom. Also, there's an all in one toolkit here for the one x. Try that, it'll simplify what you are doing.
Good luck man
ChiDi9901 said:
Did you fastboot flash the boot.img after flashing the ARHD zip? If not, your device won't boot!
Gesendet von meinem HTC One X mit Tapatalk 4
Click to expand...
Click to collapse
astrokreep said:
Your device will boot without the new boot.img, you just won't be able to communicate with your device, eg: no signal or WiFi or bluetooth. I have experienced issues like the one you are having and probably worse, can you get into the bootoader? If so select fastboot and in your cmd window type: fastboot erase cache
If all goes well you should be able to get it booting. If its still stuck try reflashing your rom. Also, there's an all in one toolkit here for the one x. Try that, it'll simplify what you are doing.
Good luck man
Click to expand...
Click to collapse
Thanks ya guys! I downloaded the all in one toolkit & I manage to unlock bootloader by re-apply tocken from HTCdev. So I just go on your suggest to get boot.img & flash it. Since I already unlocked, mean I got no problem to load CWrecovery & I try again reflash ARHD. YES everything done as well. now I'm using it! Cheer!:highfive:
But I still wonder, what happen to my phone? Does anyone experience that issue? It seems like no driver for bootloader(cause i can't use adb, no device list), but in fastboot mode i cant send file to phone, it seems certain commands may apply .
icefoxz said:
Thanks ya guys! I downloaded the all in one toolkit & I manage to unlock bootloader by re-apply tocken from HTCdev. So I just go on your suggest to get boot.img & flash it. Since I already unlocked, mean I got no problem to load CWrecovery & I try again reflash ARHD. YES everything done as well. now I'm using it! Cheer!:highfive:
But I still wonder, what happen to my phone? Does anyone experience that issue? It seems like no driver for bootloader(cause i can't use adb, no device list), but in fastboot mode i cant send file to phone, it seems certain commands may apply .
Click to expand...
Click to collapse
It happens from time to time, as I said I have had worse problems following in the same steps I have used countless times. Don't stress, take a breath, relax and take another swing at it. Don't forget to make a backup AND copy that to your pc. Terrible things happen sometimes and that backup is the difference between starting over completely and just picking up where you left off.
Anyhoo, glad things came right for you
The error you are receiving...
SD Checking...
Failed to open usb master mode
[Preload] Failed to open usb master mode
loading PJ46IMG.zip image...
Failed to open usb master mode
Please plug off USB
...is because you have a USB plug IN the phone when you start the bootloader. Either wall charging or connected to the PC.
That's all it is.
It doesn't interfere with fastboot after it's started. If you want it to go away, plug USB cable in AFTER starting fastboot.
Tigerlight said:
The error you are receiving...
SD Checking...
Failed to open usb master mode
[Preload] Failed to open usb master mode
loading PJ46IMG.zip image...
Failed to open usb master mode
Please plug off USB
...is because you have a USB plug IN the phone when you start the bootloader. Either wall charging or connected to the PC.
That's all it is.
It doesn't interfere with fastboot after it's started. If you want it to go away, plug USB cable in AFTER starting fastboot.
Click to expand...
Click to collapse
You are completely right!!!:good:
Hello, Please help me out with this problem. I have the same problem.
Thanks ya guys! I downloaded the all in one toolkit & I manage to unlock bootloader by re-apply tocken from HTCdev. So I just go on your suggest to get boot.img & flash it. Since I already unlocked, mean I got no problem to load CWrecovery & I try again reflash ARHD. YES everything done as well. now I'm using it! Cheer!
But I still wonder, what happen to my phone? Does anyone experience that issue? It seems like no driver for bootloader(cause i can't use adb, no device list), but in fastboot mode i cant send file to phone, it seems certain commands may apply .
Click to expand...
Click to collapse
I dont understand what's going on with my phone. In fastboot i can flash new recovery TWPR 2.7.0.1 and copy file cm.zip to sdcard
adb kill-server
adb push cm.zip /sdcard
Click to expand...
Click to collapse
but i can not install this rom (error "cant not mount /system/")
I cannot use sideload to sideload this rom (sideload till about 80% then i get error )
I use TWPR but in Mount menu, i cant not mount cache and system, and storage Internal Storage only 156MB. Where is my my 16GB? I dont see anywhere.
Itried to restore to factory with RUU but no luck i got error too
Please help me!!!!!
My phone:
Unlocked
EVITARE_UL PVT SHIP S-ON RL
HBOOT-1.32.0000
RADIO-SSD:1.09.55.17
eMMC-bootmode: Disabled
CPU-bootmode: Disabled
HW Secure boot: enabled
MODEM TYPE: MDM9215M
Click to expand...
Click to collapse
bluefire153 said:
Hello, Please help me out with this problem. I have the same problem.
I dont understand what's going on with my phone. In fastboot i can flash new recovery TWPR 2.7.0.1 and copy file cm.zip to sdcard
but i can not install this rom (error "cant not mount /system/")
I cannot use sideload to sideload this rom (sideload till about 80% then i get error )
I use TWPR but in Mount menu, i cant not mount cache and system, and storage Internal Storage only 156MB. Where is my my 16GB? I dont see anywhere.
Itried to restore to factory with RUU but no luck i got error too
Please help me!!!!!
My phone:
Click to expand...
Click to collapse
Wrong forum mate, you don't own the HTC one X quad-core international version ! Do NOT flash anything from here !
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Mr Hofs said:
Wrong forum mate, you don't own the HTC one X quad-core international version ! Do NOT flash anything from here !
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have a HTC One X
U have HTC one XL, not the quad-core HTC one x. Your bootloader says evita...
Sent from my HTC One X
i have the same problem...
astrokreep said:
Your device will boot without the new boot.img, you just won't be able to communicate with your device, eg: no signal or WiFi or bluetooth. I have experienced issues like the one you are having and probably worse, can you get into the bootoader? If so select fastboot and in your cmd window type: fastboot erase cache
If all goes well you should be able to get it booting. If its still stuck try reflashing your rom. Also, there's an all in one toolkit here for the one x. Try that, it'll simplify what you are doing.
Good luck man
Click to expand...
Click to collapse
Guys hello,
yesterday i tried to unlock bootloader & gain root access for the first time. But i had some problems after unlocked bootloader. until that point everything was great. but when i was trying to build a "custom recovery" via HTC One X all in One Kit V2.5, maybe i did something wrong. at the moment, my phone can not complete a factory reset. stays HTC logo on a white screen until the charge is off. when i reboot my device, my device is in "airplane mode" and i can not close it. i can not use Wifi, or telephone signal. and i do not know what the problem is...
when i enter fastboot screen, i get that
"failed to open USB master mode
loading PJ46IMG.zip image
failed to open USB master mode
please plug off USB" message, too.
when i try to fastboot clockworkmod.img, on the cmd screen, i got "error: can not load Recoveries/CWM.img". maybe the problem is here. i deleted something. and i do not know what that is...
on my fastboot screen, i see this:
"*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
MICROP-None
RADIO-5.1204.163V2.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure Boot: enabled
MODEM PATH: OFF
Jun 21 2013, 18:24:41 "
and my CID No is : TMOB101..
and one more thing...
when i select RECOVERY via power button, i do not get a menu! i see a telephone icon and over that there is a red triangle and a ! sign inside that triangle. if i do not do anything, telephone reboots after a while. but on that screen if i press, "power + vol up (not vol down)", i get a small menu:
"Android system recovery <3e>
Reboot system now
Apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Apply update from internal storage"
i do not see other menu sections that other people see...
and while this menu is active, i get a message as :
"starting cw install
Enable host mode
Disable host mode"
when i press, pow + vol up button again, host mode becomes again enable... and after that telephone reboots...
but everything is again the same... no signal, no wifi, can not turn off Airplane mode... Please help me...
i am very very new on this rom/root thing. so can you please tell me in details? will i be able to use this phone again?
memoally said:
Guys hello,
yesterday i tried to unlock bootloader & gain root access for the first time. But i had some problems after unlocked bootloader. until that point everything was great. but when i was trying to build a "custom recovery" via HTC One X all in One Kit V2.5, maybe i did something wrong. at the moment, my phone can not complete a factory reset. stays HTC logo on a white screen until the charge is off. when i reboot my device, my device is in "airplane mode" and i can not close it. i can not use Wifi, or telephone signal. and i do not know what the problem is...
when i enter fastboot screen, i get that
"failed to open USB master mode
loading PJ46IMG.zip image
failed to open USB master mode
please plug off USB" message, too.
when i try to fastboot clockworkmod.img, on the cmd screen, i got "error: can not load Recoveries/CWM.img". maybe the problem is here. i deleted something. and i do not know what that is...
on my fastboot screen, i see this:
"*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
MICROP-None
RADIO-5.1204.163V2.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure Boot: enabled
MODEM PATH: OFF
Jun 21 2013, 18:24:41 "
and my CID No is : TMOB101..
and one more thing...
when i select RECOVERY via power button, i do not get a menu! i see a telephone icon and over that there is a red triangle and a ! sign inside that triangle. if i do not do anything, telephone reboots after a while. but on that screen if i press, "power + vol up (not vol down)", i get a small menu:
"Android system recovery <3e>
Reboot system now
Apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Apply update from internal storage"
i do not see other menu sections that other people see...
and while this menu is active, i get a message as :
"starting cw install
Enable host mode
Disable host mode"
when i press, pow + vol up button again, host mode becomes again enable... and after that telephone reboots...
but everything is again the same... no signal, no wifi, can not turn off Airplane mode... Please help me...
i am very very new on this rom/root thing. so can you please tell me in details? will i be able to use this phone again?
Click to expand...
Click to collapse
First start the phone in bootloader and then connect to a computer choice fastboot and press enter then flash a recovery and you are ready to go
Thant said:
First start the phone in bootloader and then connect to a computer choice fastboot and press enter then flash a recovery and you are ready to go
Click to expand...
Click to collapse
thank you very much. now, i did it. and i installed Android revolution HD 33.1. and all is okay.
Thank you for taking time to read this!
I have a htc one x international version, i successfully unlocked the bootloader installed clockwormod recovery v5.8.4.0 and rooted the phone installing superSU without any problems.
I have been using some mod rom for a long time, And recently updated BUSYBOX, and then turned off phone. Now and now i cant get passed the htc boot screen, i have tried deleting cache, loading a previous restore img from 6 months ago, rebooting bootloader but none of that worked, here are the details from the boot screen:
p.s if you can get me into the phone, would be a life saver! or stock android 4.x that would be an added "Brucey" bonus.
Thank you again for your time, best regards
Ernest
ENDEAVORU PUT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.14
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
Modem Path: Off
May 8 2012 21:32:10
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SHOW BARCODE
IMAGE CRC
Erniemac said:
Thank you for taking time to read this!
I have a htc one x international version, i successfully unlocked the bootloader installed clockwormod recovery v5.8.4.0 and rooted the phone installing superSU without any problems.
I have been using some mod rom for a long time, And recently updated BUSYBOX, and then turned off phone. Now and now i cant get passed the htc boot screen, i have tried deleting cache, loading a previous restore img from 6 months ago, rebooting bootloader but none of that worked, here are the details from the boot screen:
p.s if you can get me into the phone, would be a life saver! or stock android 4.x that would be an added "Brucey" bonus.
Thank you again for your time, best regards
Ernest
ENDEAVORU PUT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.14
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
Modem Path: Off
May 8 2012 21:32:10
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SHOW BARCODE
IMAGE CRC
Click to expand...
Click to collapse
try fastboot erase cache:good:
rudresh128631 said:
try fastboot erase cache:good:
Click to expand...
Click to collapse
Hi there!
I went into Fastboot, and only have:
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN
so i went back into HBOOT
RECOVERY
-Wipe Cache Partition
I have previously also tried fixing user permissions and wipe dalvik cache.
Still no joy I can mount the SD Card so my stuff is still there, i have backed up my photos and whatsapp as I'd like to keep the chat msgs haha.
Do you have any other ideas rudresh?
Thanks
To install a new rom i suggest to update the hboot. It's to low for current developed roms/mods.
Post the outcome of
Fastboot getvar version-main
Get you back to stock and update the phone. Then re-root or install a custom rooted rom
Mr Hofs said:
To install a new rom i suggest to update the hboot. It's to low for current developed roms/mods.
Post the outcome of
Fastboot getvar version-main
Get you back to stock and update the phone. Then re-root or install a custom rooted rom
Click to expand...
Click to collapse
atm i dont have fastboot getvar version-main, will this option become available once i have updated HBOOT?
many thanks for answering my noobie questions!
It's a command via fastboot. You put the phone in the bootloader where you see FASTBOOT USB in red when you connect the phone to the pc. Then open a command prompt on the pc from the fastboot folder and type in that command.
Download HTC one x fastboot tools. Install htc drivers. Open fast boot tool folder. Hold shift button and right click then chose open in command window from dropdown list. Boot your device into boot loader. Connect your device. Select fastboot in device. Then it should turn fastboot to fastboot usb highlighted in red color. In command prompt type fastboot devices. If your devices serial number appeared in command window then your device is connected. Type fastboot erase cache. After erasing cache reboot.
Sent from my HTC One X using xda premium
rudresh128631 said:
Download HTC one x fastboot tools. Install htc drivers. Open fast boot tool folder. Hold shift button and right click then chose open in command window from dropdown list. Boot your device into boot loader. Connect your device. Select fastboot in device. Then it should turn fastboot to fastboot usb highlighted in red color. In command prompt type fastboot devices. If your devices serial number appeared in command window then your device is connected. Type fastboot erase cache. After erasing cache reboot.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Not gonna work.....
Mr Hofs said:
It's a command via fastboot. You put the phone in the bootloader where you see FASTBOOT USB in red when you connect the phone to the pc. Then open a command prompt on the pc from the fastboot folder and type in that command.
Click to expand...
Click to collapse
Hi Mr Hofs!
THanks for your advice, I have fastboot working now at home. I tried fastboot erase cache just in case it worked. Then did your command
Code:
C:\Android\android-sdk\platform-tools>Fastboot getvar version-main
version-main: 1.29.401.11
finished. total time: 0.085s
Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.
Mr Hofs said:
Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.
Click to expand...
Click to collapse
Wow your fast! i just figured out what your trying to get me to do, and found the RUU page haha. Thank you so much for your time. BRB in 20 mins or so!
Mr Hofs said:
Okay, make a copy of the sdcard to the pc just in case. Then download this ruu
http://www.androidruu.com/getdownlo...Radio_2.1204.127.19_release_271851_signed.exe
Relock the bootloader :
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu with admins rights. Right click the ruu.exe and choose
Run as administrator
It flashes the phone to stock. Boot it up after that and go to settings-about-software update and check for ota ..... Do this after every ota you get until you get no notifications anymore. Report back with issues or when you have updated the phone multiple times.
Click to expand...
Click to collapse
OK IM IN!!!!!!!!! Android 4.03 but im not getting any OTA updates, maybe because Im abroad currently? ill dig around for some updates.
Thanks so much, ill drop you a lil tip once i get paid before Chinese New Year
Then download this one and run it too
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_274900_signed.exe
And if you don't get ota after that one you can continue to install this one
http://www.androidruu.com/getdownlo...Radio_5.1204.162.29_release_302015_signed.exe
And then there must be ota available
Mr Hofs said:
Then download this one and run it too
http://www.persianhtc.net/index.php...Radio_2.1204.135.20_release_274900_signed.exe
And if you don't get ota after that one you can continue to install this one
http://www.androidruu.com/getdownlo...Radio_5.1204.162.29_release_302015_signed.exe
And then there must be ota available
Click to expand...
Click to collapse
First one was perfect getting updates galore!
Quick question: My old apps are still on the SD Card, so say i install Whatsapp / WeChat from the PlayStore, and move to SD Card will it link up the old data? or just overwrite the folder so Titanium back up is my best bet.
Just gonna finish them then i guess flash SUupdate.zip or whatever it is and i can use titanium back up to restore my apps.
Many thanks again
-E
Yeah via TB is a good option have fun
Hi guys.
I decided to give Cyanogenmod a try, but apparently messed something really badly during the installation. After flashing boot.img with fastboot, as the installation guide says (I can't post links, but it's in the Cyanogenmod wiki under HTC One X. First google result), the phone gave me the HTC slogan splash screen, but won't go forward.
By pressing volume down and power, I can get myself into the bootloader, which says:
Code:
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
MICROP-None
RADIO-5.1204.167.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
It also lists the following options: FASTBOOT, RECOVERY, FACTORY RESET, SIMLOCK, SHOW BARCODE, IMAGE CRC. Recovery and factory reset are not working. If I select either one of them, the phone boots itself and ends up in the previously mentioned splash screen. I don't know what simlock does, so I haven't selected it. With barcode the same thing. Image CRC gives me some values that I don't understand.
If I select fastboot, I get the following menu: HBOOT, REBOOT, REBOOT BOOTLOADER, POWER DOWN. Hboot reverts me back to the bigger menu. Rest of the options are pretty self-explanatory.
I have a zip copy of Cyanogenmod on /sdcard/.
What can be done? Is my phone bricked for good? I am using Linux Mint 16 as my computer operating system. It is Ubuntu based. adb doesn't recognize my phone when it is in bootloader mode.
Any help will be greatly appreciated.
daebak said:
Hi guys.
I decided to give Cyanogenmod a try, but apparently messed something really badly during the installation. After flashing boot.img with fastboot, as the installation guide says (I can't post links, but it's in the Cyanogenmod wiki under HTC One X. First google result), the phone gave me the HTC slogan splash screen, but won't go forward.
By pressing volume down and power, I can get myself into the bootloader, which says:
Code:
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
MICROP-None
RADIO-5.1204.167.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
It also lists the following options: FASTBOOT, RECOVERY, FACTORY RESET, SIMLOCK, SHOW BARCODE, IMAGE CRC. Recovery and factory reset are not working. If I select either one of them, the phone boots itself and ends up in the previously mentioned splash screen. I don't know what simlock does, so I haven't selected it. With barcode the same thing. Image CRC gives me some values that I don't understand.
If I select fastboot, I get the following menu: HBOOT, REBOOT, REBOOT BOOTLOADER, POWER DOWN. Hboot reverts me back to the bigger menu. Rest of the options are pretty self-explanatory.
I have a zip copy of Cyanogenmod on /sdcard/.
What can be done? Is my phone bricked for good? I am using Linux Mint 16 as my computer operating system. It is Ubuntu based. adb doesn't recognize my phone when it is in bootloader mode.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
Are you install the rom or you just flash the boot.img. And next time search and read this question is answeared many times and go in the original android thread download latest nightly take the boot.img from arhiv copy the arhive to sd card install the rom and flash the boot.img.
And if you not install the CM11 rom just flash the old boot.img.
Thant said:
Are you install the rom or you just flash the boot.img. And next time search and read this question is answeared many times and go in the original android thread download latest nightly take the boot.img from arhiv copy the arhive to sd card install the rom and flash the boot.img.
And if you not install the CM11 rom just flash the old boot.img.
Click to expand...
Click to collapse
Sorry for being dumb, but how am I supposed to do this if I can't get an usb connection going between my computer and the phone? Like I said, adb and fastboot are not detecting my phone and I can't access /sdcard/ at all.
Press fastboot then connect the usb and it will say FASTBOOT USB
Sent from my HTC One X using XDA Premium 4 mobile app
daebak said:
Sorry for being dumb, but how am I supposed to do this if I can't get an usb connection going between my computer and the phone? Like I said, adb and fastboot are not detecting my phone and I can't access /sdcard/ at all.
Click to expand...
Click to collapse
when you see fastboot USB check the device with fastboot devices. And when you connect the phone to computer what you see in devicemanager. try install latest drivers
Make sure your computers drivers are up to date, this may be why your computer is not detecting your device. Otherwise you must have the Android SDK correctly installed (Making sure your PC knows where to find the .dll files), to allow for fastboot to work correctly (Otherwise you can find fastboot binaries on the official HTC website). Once you've booted into the bootloader (Power button + volume down) select 'fastboot'. Your device should show 'fastboot usb' if it is correctly connected to the PC.
Remember you will not be able to access your devices files within the bootloader, so you may need to flash TWRP, which allows you access to your internal memory via your PC. In my experience, the touch function did not work for TWRP on my device, so I reflashed CWM to flash CM. Once you've flashed CM, you can then flash the boot.img found within the CM's files (after unzipped) using fastboot. Other than that, you may want to flash GAPPS before you boot up into your fresh ROM.
Hope this helps.
EDIT: .dll files for Windows only I think