Use launchers on the NEW Kindle Fire? - Kindle Fire Q&A, Help & Troubleshooting

Been trying to use a couple of different launchers, with no success...
I've been able to install the launchers I found and liked however when installed on the New Kindle Fire ( Running 10.1.13 )
I dont get the option to select which launcher I would like to use when the home button is pressed or when I reboot the device.
I don't have the device rooted ( theres no root out yet and Sadly I cannot root myself )
So if anyone could figure out a method that works It would most likely help alot of people who just bought the device and are having issues with the bookshelf layout....

Related

[Q] Kindle Fire 6.3 - Is it possible to sideload google market?

I have rooted my fire before using the method from this thread here. So I realized the main reason I wanted to root it was to get the marketplace. Now I know with 6.2.2 you could use "Superoneclick" then after installing the marketplace and changing permissions you could then use SOC(superoneclick) to "Unroot" the device and yet still keep the google market.
My question is, using the KF Utility for 6.3 by Teamwin, can you succesfully unroot the device and still keep the market like you could with 6.2 or has this ability been broken. As you can tell I have done some research and to no avail have found anyone saying how to unroot a 6.3 KF and yet still keep google market. Also, if this is possible is Google Play also possible and perhaps Google Books
Thanks (sorry if this is answered somewhere I did a search on the forum and didn't find anything to these specific items)
NOTE: I do know you can sideload apps but I heard sideloading the market is next to impossible without first rooting the device.
Scizzer85 said:
I have rooted my fire before using the method from this thread here. So I realized the main reason I wanted to root it was to get the marketplace. Now I know with 6.2.2 you could use "Superoneclick" then after installing the marketplace and changing permissions you could then use SOC(superoneclick) to "Unroot" the device and yet still keep the google market.
My question is, using the KF Utility for 6.3 by Teamwin, can you succesfully unroot the device and still keep the market like you could with 6.2 or has this ability been broken. As you can tell I have done some research and to no avail have found anyone saying how to unroot a 6.3 KF and yet still keep google market. Also, if this is possible is Google Play also possible and perhaps Google Books
Thanks (sorry if this is answered somewhere I did a search on the forum and didn't find anything to these specific items)
NOTE: I do know you can sideload apps but I heard sideloading the market is next to impossible without first rooting the device.
Click to expand...
Click to collapse
just use the utility you used to root KFU and you can load the google apps with it
DJLamontagneIII said:
just use the utility you used to root KFU and you can load the google apps with it
Click to expand...
Click to collapse
I understand that. I am trying to have the Google/Android Market be on the unrooted KF 6.3 OS. I would post the article but I don't have enough posts yet lol. The article is on Lilputing though. The article title is "How to sideload apps (even the Android Market) on the Amazon Kindle Fire". They are using SuperOneClick (which apparently doesn't work with 6.3) and in using SOC they quickly root the device, install the things they want, then unroot using SOC and keep everything.
My question is, is this possible on 6.3 using KFU or is SuperOneClick now supported for 6.3...
Yes you can. Root with KFU. Side load the market (google play) as a system app along with the Google framework and once every thing works download OTARootkeeper and install.
You can then unroot an re-root at will.
Sent from my Kindle Fire using Tapatalk 2
bfayer said:
Yes you can. Root with KFU. Side load the market (google play) as a system app along with the Google framework and once every thing works download OTARootkeeper and install.
You can then unroot an re-root at will.
Sent from my Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
Ok. Thanks. I have heard of OTARootkeeper but thought it just mimicked a Root/Unroot device. I didn't know if that would work with 6.3. I am surprised there isn't an article out there discussing my specific question. I thought it would be a common thing to ask. Thank you though I will give that a try.
Edit: I haven't done this just yet to test but my end goal was to have the KF unrooted and still have access to the android market. Using OTARk makes it seem like if I want the android market I just "quick root" it back to get it. I may be misunderstood what "root" really means when it comes to the KF.
Here is a better way of explaining.
1. Download Google play store and Googleservicesframework. Apk
2. Move the Google play store to system/apps
3. Install Googleservicesframework apk like a normal application.
4. Reboot your device
5. The play store should work. Now you may unroot your device.
Kindle Fire running CM9 Reloaded
New developer, working on my own custom rom
Daevionne said:
Here is a better way of explaining.
1. Download Google play store and Googleservicesframework. Apk
2. Move the Google play store to system/apps
3. Install Googleservicesframework apk like a normal application.
4. Reboot your device
5. The play store should work. Now you may unroot your device.
Kindle Fire running CM9 Reloaded
New developer, working on my own custom rom
Click to expand...
Click to collapse
Thanks for all the help and clarifying. One last question. To unroot do you suggest using OTAKroot or is there a way to make a more "solid" unroot and yet still keep the play store? Again thanks for quick helpful responses everyone.
I suggest OTA root keeper. Its the only way I know to unroot your device. If you like the answer I gave you hit the "thanks" button
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Daevionne said:
I suggest OTA root keeper. Its the only way I know to unroot your device. If you like the answer I gave you hit the "thanks" button
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Click to expand...
Click to collapse
Ok so I have everything done however it's not the exact result I was hoping/expecting. I was wanting the main stock look of the KF but with the market installed and working. Right now I have unrooted but am having trouble figuring out how to get back to my Amazon KF stock launcher and my Amazon Prime videos.
Edit: I can't figure out how to get to my Amazon bookshelf anymore. I have the Amazon App store and Kindle App from the market but how do I get back to the amazon bookshelf?
Scizzer85 said:
Ok so I have everything done however it's not the exact result I was hoping/expecting. I was wanting the main stock look of the KF but with the market installed and working. Right now I have unrooted but am having trouble figuring out how to get back to my Amazon KF stock launcher and my Amazon Prime videos.
Edit: I can't figure out how to get to my Amazon bookshelf anymore. I have the Amazon App store and Kindle App from the market but how do I get back to the amazon bookshelf?
Click to expand...
Click to collapse
You have to clarify a bit more for me...
1. Is the play store up and working?
2. Did you download any custom launchers?
3. Did you download any custom lockscreens?
4. The steps you took were root, installed market, unroot, correct ?
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Daevionne said:
You have to clarify a bit more for me...
1. Is the play store up and working?
2. Did you download any custom launchers?
3. Did you download any custom lockscreens?
4. The steps you took were root, installed market, unroot, correct ?
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Click to expand...
Click to collapse
Play store is working. I tried Go Launcher to see if I could get the Default Launcher through there. No lockscreens. It is currently with CM7 unrooted via OTA Rootkeeper. But when I rebooted after unrooting it I had the CM7 android interface still. Not KF default interface.
This video is what I essentially was trying to accomplish. He has the Launcher.apk but it seems to not work on CM7 or at least not 6.3. Right now, I can't get to the instant video screen or bookshelf at all...
http://www.youtube.com/watch?v=8Q655g1RHgU
This video was from November, that was before 6.2 :/ I think this method is outdated... sorry
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Scizzer85 said:
Play store is working. I tried Go Launcher to see if I could get the Default Launcher through there. No lockscreens. It is currently with CM7 unrooted via OTA Rootkeeper. But when I rebooted after unrooting it I had the CM7 android interface still. Not KF default interface.
Click to expand...
Click to collapse
So you not only rooted but you installed a custom ROM.
That's a whole other story.
To get what you want you need to restore your original ROM from backup. Reroot with KFU. Side load the framework and market and unroot with OTA rootkeeper. You should have made a backup from restore before you installed CM7.
Do not repeat do not upgrade the kindle reader from the market if you wish to keep using the original launcher.
It would help if we knew why you wanted to be un rooted.
Rooting only gives you access to your file system. The only custom softwear you need is superuser. Unrooting with OTA rootkeeper just makes a backup of SU and then removes it. You can then watch movies etc. But when you need root back you just restore your SU backup in OTA rootkeeper.
Why do you need to permanantly unroot ?
Sent from my Kindle Fire using Tapatalk 2
Since you are loading ROMs, I'd recommend MoDaCo rom. It's the closest to stock with the play store already added.
http://forum.xda-developers.com/showthread.php?t=1439916
Another option
Keep stock, root, add SU, (and add go launcher if you want) Just add a shortcut to the kindle launcher. Unroot. Then you can switch back and forth. Simplest way.
I sideloaded the market app with file expert when I was happy with stock.
Though I don't know why you insist on unrooting.
Cheshire.Love said:
Since you are loading ROMs, I'd recommend MoDaCo rom. It's the closest to stock with the play store already added.
http://forum.xda-developers.com/showthread.php?t=1439916
Another option
Keep stock, root, add SU, (and add go launcher if you want) Just add a shortcut to the kindle launcher. Unroot. Then you can switch back and forth. Simplest way.
I sideloaded the market app with file expert when I was happy with stock.
Though I don't know why you insist on unrooting.
Click to expand...
Click to collapse
I guess I misunderstood what rooting really meant. So I can use KFU to root the device but after doing so DO NOT install CM7 and instead just sideload google market and once installed just use it to install any apps but at the same time since CM7 wouldn't be installed I would be seeing the basic interface from KF as it is stock?
Scizzer85 said:
I guess I misunderstood what rooting really meant. So I can use KFU to root the device but after doing so DO NOT install CM7 and instead just sideload google market and once installed just use it to install any apps but at the same time since CM7 wouldn't be installed I would be seeing the basic interface from KF as it is stock?
Click to expand...
Click to collapse
Correct. You do not need to do anything after you root unless you want to. Everything on your KF will stay stock. I would recommend you flash a recovery (I prefer CWM) that way you can reload your backup if you need to. Whst I would do is root install firefirefire and CWM. Reboot to CWM and backup everything. Then load the framework and market. When you root make sure SU is properly installed before you move ahead. You will need a copy of root explorer or another file manager to make this all happen with the least pain.
Remember if you keep the stock launcher DO NOT update the kindle reader from the market. The stock KF reader is not the same as the market version but the market will see it as an old version and try to get you to update it.
I run both the stock launcher and go launcher. I keep a shortcut to the stock launcher on my go launcher dock and a shortcut to go launcher on my stock dock. I toggle between them as needed.
Sent from my Kindle Fire using Tapatalk 2
bfayer said:
Correct. You do not need to do anything after you root unless you want to. Everything on your KF will stay stock. I would recommend you flash a recovery (I prefer CWM) that way you can reload your backup if you need to. Whst I would do is root install firefirefire and CWM. Reboot to CWM and backup everything. Then load the framework and market. When you root make sure SU is properly installed before you move ahead. You will need a copy of root explorer or another file manager to make this all happen with the least pain.
Remember if you keep the stock launcher DO NOT update the kindle reader from the market. The stock KF reader is not the same as the market version but the market will see it as an old version and try to get you to update it.
I run both the stock launcher and go launcher. I keep a shortcut to the stock launcher on my go launcher dock and a shortcut to go launcher on my stock dock. I toggle between them as needed.
Sent from my Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
I followed everything except CWM. Is that something similar to KFU as far as how to root it or is that like the TWRP that I had before for recovery? And thanks for explaining all this.
It is like TWRP. A recovery program. I like it much better. But it does the same thing.
Sent from my Galaxy Nexus using Tapatalk 2
Ok. After some tweaking I now have reset the device back to factory settings. Re-rooted, used CWM for backup/recovery. I used the MoDaCo and successfully installed the Google Play store. Installed OTA rootkeeper and used it to "temp unroot" my device. I was hoping this would give me access to the "Watch Now" on the Amazon Video but it still is greyed out. Truth be told, I got the month free of Prime for getting the KF but I probably won't continue to pay. Regardless, is that the only feature that I can't get with the rooted device? If so, then I am to say, happy for sure.

Just rooted Kindle fire for the first time, cannot use apps

Hi, so given that this is my first post here I tried to read through all the noob-guides and search for similar issues, but the effort was ultimately fruitless so I had to create this thread. Hopefully I was not merely incompetent and the question has not been asked a million times already.
So the problem I am facing is that when I enter the GO Launcher market most of the apps tell me "Your device isn't compatible with this version". This is really annoying because the reason I did the root was to gain access to the market/apps. My Kindle Fire was bought as a gift in the US and as such I cannot use the stock market without an American credit card (I am European), fair enough as long as I can get the root solution to work.
So this is what I did:
I rooted the Fire using this guide: Guide had to be removed from post because of posting restrictions for new users
which means I used Kindle Fire Utility, and that whole process went well. Then I did the "install google apps" option within KFU. This apparently installed GO Launcher Ex which I guess must be the way to get the stock ROM to accept the google market. I booted using GO Launcher Ex and all appeared to be well until I accessed the market and almost all the apps told me that "Your device isn't compatible with this version".
I have tried to find a solution on my own, and most places seem to indicate that the problem is that the dpi has been changed. Those topics were also based on different tablet/pdf-readers/phones or different ROMs, thus I did not ask this question in those topics. The problem with saying that the dpi must have been changed is that I have not manually changed it, and I cannot find the option to change it on my Kindle Fire either.
Hopefully one of you savvy gentlemen will be able to assist me with this as I am equal parts confused and inexperienced with rooting tablets.
Thanks in advance for your help!
Go launcher ex does not allow you to install the Google market app. It's just a launcher (the app that opens when you hit the home button)
The easiest solution for you is to install TWRP and FireFireFire and install the Modaco ROM.
veeman said:
Go launcher ex does not allow you to install the Google market app. It's just a launcher (the app that opens when you hit the home button)
The easiest solution for you is to install TWRP and FireFireFire and install the Modaco ROM.
Click to expand...
Click to collapse
Thank you for your quick reply. I wish I could have linked you to the rooting-guide I used. This is what it says after it guides me through the rooting process:
"If you want to stick with the standard Kindle experience but want access to Google apps including the Play Store, Gmail app, and Google Maps, choose the option in Kindle Fire Utility marked “Extras” and then use the option for “Install Google Apps.”"
And that is exactly what I did using KFU. And that is when it installed the Go launcher ex too as far as I could tell.
I already have TWRP and FireFireFire installed through KFU, I could try installing the Modaco ROM, but are you saying that there is no way I can run apps on my rooted Kindle with the stock ROM on it? I just feel like using custom ROMs would complicate my tablet more than what is necessary when all I want is to able to use apps on it. However, if you think that is my best option given the fact that I don't expect my tablet to be capable of anything out of the ordinary, then I will give it a try!
Yes you can use it on the stock ROM. Just find the correct Google apps package and move it to your Kindle via USB. Then boot into twrp and flash it. ( that's how I've always done it. I didn't use kfu)
The Modaco ROM is exactly like the stock kindle fire ROM but it has Google apps already installed and also comes with a modified build.prop.
veeman said:
Yes you can use it on the stock ROM. Just find the correct Google apps package and move it to your Kindle via USB. Then boot into twrp and flash it. ( that's how I've always done it. I didn't use kfu)
The Modaco ROM is exactly like the stock kindle fire ROM but it has Google apps already installed and also comes with a modified build.prop.
Click to expand...
Click to collapse
Just flashed Modaco ROM and it appears to work flawlessly! Thank you very much good sir! Solved :good:

KFHD8.9 starirom twrp confusion

Hi guys! I recently swore off tinkering with my Kindle Fire HD 8.9, but just couldn't help myself. I'm not too incompetent...I've rooted the 7 inch Kindle with success and recently unlocked and rooted a Samsung Infuse phone. All that being said, I am bit confused. Here is what I've done:
I rooted the KFHD8.9 using the binary tool. The only problem I ran into was in the window shell portion (when I was supposed to type in /data/local/tmp/onload.sh). I ended up skipping this part. Probably not wise. Anyway, the root was successful and Root Analyzer says it is rooted.
I then successfully installed 8.9Starirom. I have it set up the way I want it now. My goal is to install xbmc apps so I can stream icefilms.
Here is the catch ...
I don't have TWRP installed. I never installed it after rooting. I saw that installing 8.9Starirom would give me an option to install it. It says I would get a red screen if I didn't have it and then I'd have an option to install, thus correcting the red screen. I never got the red screen. I also never get the "blue" Kindle logo when booting. The device loads and I get the option to load with Go Launcher EX, Go Locker, or Kindle.
All is working well. My apps that I had installed all work. New apps I install work. Wifi works.
I'm just not convinced I have everything set up properly. Can someone point me in the right direction as to what I should do at THIS point. Maybe the answer is "nothing", but I want someone more experienced than me to tell me that.
Thanks for any guidance!
this teekb
For what it's worth ... I just successfully installed XBMC and Icefilms on this Kindle. Both are working.
Any ideas on my twrp / fastboot issue?

[Q] Kindle hd 8.9 stuck in slow mode after failed re root

My kindle hd 8.9 was re rooted using bin4ry v31 after the last ota update 8.4.8. It worked fine. Now there was another ota update to 8.4.9 on 6/14/14. I tried using the same method as before. ADB is enabled in my kindle, I am seeing Android Composite ADB interface. when I plug the kindle in. I got through part of the re root, where it rebooted, and now it is extremely slow, has a black screen with white cracked lines to slide in open, and although some things work they are very very slow. Please can someone either help me re root or unroot it so that the kindle runs normally. I don't know what mode that slow one is, but you can't do much of anything. I tried to roo a few times, and tried to put in the stock kindle update and re run it, but nothing is working to get it out of the slow mode. Right now my computer can see and put things onto the kindle, and when trying to root, it seems like it is trying to work, but since the kindle is slow, I don't know if it is getting stuck and not finishing.
Can you help me figure out what is wrong?
benee16 said:
My kindle hd 8.9 was re rooted using bin4ry v31 after the last ota update 8.4.8. It worked fine. Now there was another ota update to 8.4.9 on 6/14/14. I tried using the same method as before. ADB is enabled in my kindle, I am seeing Android Composite ADB interface. when I plug the kindle in. I got through part of the re root, where it rebooted, and now it is extremely slow, has a black screen with white cracked lines to slide in open, and although some things work they are very very slow. Please can someone either help me re root or unroot it so that the kindle runs normally. I don't know what mode that slow one is, but you can't do much of anything. I tried to roo a few times, and tried to put in the stock kindle update and re run it, but nothing is working to get it out of the slow mode. Right now my computer can see and put things onto the kindle, and when trying to root, it seems like it is trying to work, but since the kindle is slow, I don't know if it is getting stuck and not finishing.
Can you help me figure out what is wrong?
Click to expand...
Click to collapse
Yep sucks for us for now it seems
Mine is in the same state. To unslow mo it all i found that works is using recovery mode to erase every single thing on it. This will speed it back up to normal. Beyond that i don't have a clue what to do.
You can enter recovery mode if you dont know how by pressing volume down and power. Or dl droid explorer run it click the multi colored shield icon and reboot to recovery.
I would hold off for now though. As one of these guys may have a way to save you all the head aches i have now. I had psp emulator playstation emu nintendo ds dolphin aka game cube and wii all running properly now all gone. go figure. Pain in the rear to get em all running properly. Oh worst bit loosing my crisis core newgame + save lvl 35+ with all items etc etc. Was gona put the hurt on every thing LOL
Oh and if theres any amazon employees lurking and reading great job on becoming a apple clone wanabe In other words amazon you all need to get a grip. People want to customize their tablets and have something that runs like mad with out regards to warranty. We want our tablets the way we want them not the way you want them. No one likes apple with their forced updaties etc
benee16 said:
My kindle hd 8.9 was re rooted using bin4ry v31 after the last ota update 8.4.8. It worked fine. Now there was another ota update to 8.4.9 on 6/14/14. I tried using the same method as before. ADB is enabled in my kindle, I am seeing Android Composite ADB interface. when I plug the kindle in. I got through part of the re root, where it rebooted, and now it is extremely slow, has a black screen with white cracked lines to slide in open, and although some things work they are very very slow. Please can someone either help me re root or unroot it so that the kindle runs normally. I don't know what mode that slow one is, but you can't do much of anything. I tried to roo a few times, and tried to put in the stock kindle update and re run it, but nothing is working to get it out of the slow mode. Right now my computer can see and put things onto the kindle, and when trying to root, it seems like it is trying to work, but since the kindle is slow, I don't know if it is getting stuck and not finishing.
Can you help me figure out what is wrong?
Click to expand...
Click to collapse
Factory reset is always better than flashing and other serious tinkering. kindle hd 8.9 is still rootable with 8.4.9 update, I did it and another member KatanAlive have done it.
What method did you use to root? There are a few different methods. used bin4ry v31 I used the old special option, then also tried the old option.
akb1ajay said:
Factory reset is always better than flashing and other serious tinkering. kindle hd 8.9 is still rootable with 8.4.9 update, I did it and another member KatanAlive have done it.
Click to expand...
Click to collapse
Ive tried various tools etc. While it seems i am able to get root i can not for example view the root directory in adb shell. I can kill any process under ps list even ones ran by root. Again the root directory shows as empty under ls. Running the superuser app that does show under apps seems t do nothing (im assuming this is because root is already active by this point) It does load but nothing in log window. Also it remains stuck running extremely slow. I can not install google frame work etc.
What i want to do is just go with a custom rom and be done with this mess. After all if amazon managed to force updates on kindles with ota disabled and blocked once they will likely be able to do so again. So theres zero point in staying on a stock rom even downgraded and or rooted.
Now the only problem there is it seems rom update requires fastboot? If this is not the case what are the steps to go about it by a different means? Or what methods other than fastboot cables are there to force it in to fastboot with out ripping in to the kindlefire hd 8.9 in my case?
benee16 said:
What method did you use to root? There are a few different methods. used bin4ry v31 I used the old special option, then also tried the old option.
Click to expand...
Click to collapse
I used manual method described in this thread and yesterday another member also used this same method to root the Kindle with update 8.4.9 http://forum.xda-developers.com/showthread.php?t=2069117
I have been extensively reading this forum for rooting Kindle Fire HD 8.9 and I have seen people failed just because of a simple mistake or not starting afresh. Many people were able to overcome their anomalous problem just by a factory reset and then starting again the process of rooting.
No one knows at which step problem started to appear until you clarify completely that what method you were following, or did you install some other drivers mentioned in another method, or did you interrupted the progress, or any other tinkering you had had done earlier with Kindle.
Every method pre assumes that your device is in default condition and your PC has favourable environment for the completion of the rooting process. Like a meber was following the process of rooting and when a stage came to enter his Amazon password, he entered the password but the process could not be continued, because his Kindle was not registered , so even after entering the correct password the process was aborted. Later he registered his Kindle and started agin and it was rooted.
So true what you've said about it not being a fresh root. I am going to try a few more times to root, then do a factory reset. My kindle could use a fresh start, but I thought I'd try just for future knowledge. If anyone else comes back from the slow kindle stage, please contribute what you've done to fix it because it may help someone else resolve their issues.
I decided to do a full restore. Then I was able to use a bin4ry script for kindles to root. Now I am having difficulty getting google play to work again. I keep getting an error not enough space on the partition \system. Free up 6MB in system and try again. I put a version of google market on to see if there would be a difference. I was able to open it, but nothing will download. Anyone else have any experience with this problem?
benee16 said:
I decided to do a full restore. Then I was able to use a bin4ry script for kindles to root. Now I am having difficulty getting google play to work again. I keep getting an error not enough space on the partition \system. Free up 6MB in system and try again. I put a version of google market on to see if there would be a difference. I was able to open it, but nothing will download. Anyone else have any experience with this problem?
Click to expand...
Click to collapse
If you have rooted Kindle "not enough space" problem can be easily resolved. Is your Kindle rooted?
Yes my kindle fire hd 8.9 is rooted. I currently have version 8.4.9 software from amazon.
benee16 said:
Yes my kindle fire hd 8.9 is rooted. I currently have version 8.4.9 software from amazon.
Click to expand...
Click to collapse
I too have had this low space problem after updating to 8.4.9. I was despaired but after searching the internet for 2/3 hours I found the solution. First thing you need to do is to get Titanium Backup from somewhere. It has the capacity to convert system app to user app and this will free up some ROM space so you can install Google Play afterward. Convert one by one some system apps that are not critical to Kindle's functioning, to user app. For example, you can convert Silk browser, Amazon Video, Amazon music, Kindle tutorial, Office Suite to user app. The moment you have above 20 MB free space in ROM you can install there Google Play. I am not sure if a free version of Titanium Backup have this functionality or not, I have installed a pro version of it. If free version is of no use then get a pro version from somewhere. I think you know where to get it from. Good Luck.
Wow thanks so much for the info. I did not have the pro version of titanium. Instead I used /system /app mover which is a free app. I changed a few system files to user files like suggested and am now able to use google play. I made sure I could download apps from it also, and it worked just fine. Now I have to re download apps I lost when I had to restore.
benee16 said:
Wow thanks so much for the info. I did not have the pro version of titanium. Instead I used /system /app mover which is a free app. I changed a few system files to user files like suggested and am now able to use google play. I made sure I could download apps from it also, and it worked just fine. Now I have to re download apps I lost when I had to restore.
Click to expand...
Click to collapse
:good:
would not you press Thanks Button?

Can't launch SuperSU on Amazon Fire Tv

Hey, just wondering if anyone can help, for the past week I've been trying to fix a problem with my Fire tv and have tried various methods to fix this issue. Basically I use Sloane 5.0.5 r4 ROM on my aftv 2, it comes with super su and the root does work as superuser requests pop up to allow or deny. However super su doesn't appear in apps (the GUI management tool) when installed (tried various versions of supersu from 2.4 to 2.7) and I try to launch it, it just takes me back to the home screen. From googling I can see a few others have a similar problem, some people suggesting kingroot(not keen to use that as it doesn't give me the same options as super su) some suggesting rbox will make an update to sort the problem. Although not something I know is definite. The super su works and it's binaries as suggested earlier but the gui tool is nowhere to be seen. Even tried changing sloanes rom and replacing it with another supersu version but this hasn't worked. Just to add more details im running TWRP recovery also!
Thanks.
Aaron-Marcus said:
Hey, just wondering if anyone can help, for the past week I've been trying to fix a problem with my Fire tv and have tried various methods to fix this issue. Basically I use Sloane 5.0.5 r4 ROM on my aftv 2, it comes with super su and the root does work as superuser requests pop up to allow or deny. However super su doesn't appear in apps (the GUI management tool) when installed (tried various versions of supersu from 2.4 to 2.7) and I try to launch it, it just takes me back to the home screen. From googling I can see a few others have a similar problem, some people suggesting kingroot(not keen to use that as it doesn't give me the same options as super su) some suggesting rbox will make an update to sort the problem. Although not something I know is definite. The super su works and it's binaries as suggested earlier but the gui tool is nowhere to be seen. Even tried changing sloanes rom and replacing it with another supersu version but this hasn't worked. Just to add more details im running TWRP recovery also!
Thanks.
Click to expand...
Click to collapse
It's something Amazon does to Android and SuperSU being a system app. I noticed the same problem with the Play Store. You might be able to launch it while in an alternative launcher and/or using adb shell.
Run a adb shell and fire up this one
pm path eu.chainfire.supersu
Just to check the installation path
Hey rbox! Many thanks for your reply, and well done on your effort with this rom, can't fault it except for this minor issue. Been tearing my hair out trying to figure out exactly why it all looks fine and well but won't launch. I was thinking of trying to install play store using xposed, was looking at a guide online and wondered if it would open through play store. Didn't realise I could use another launcher with your rom though. Do you know if there's others you know that understands amazon devices to come up with a fix, update etc? seems like you're the only one to make a rom so far for the aftv so I'm guessing it'll take time until everyone fully understands amazon devices and apply similar Android based roms. Thanks for your advice.
Here's what the path came back as, I did notice there's two different locations for supersu though.
correct me if i'm wrong but as far as i know the supersu (the one that you just found) is the su binary but the GUI (which is responsible for the grant notification) is here: /system/app/Superuser.apk
I'm not 100% sure about it, so maybe someone could light up the dark
once sloane-5.0.5-rooted_r4 is flasheed can we update SU from play store?
Sure but you don't have to. Just take that one http://apps.evozi.com/apk-downloader/?id=eu.chainfire.supersu
Sent from my Nexus 6 using XDA-Developers mobile app
Cool thks but i purchased the pro and thought i could update without breaking anything on the fire
ok i updateed to pro since it was allready purchased, all went well but dont know what it does more since i cant open the app loll, but it works, thats what counts
Habs69M said:
ok i updateed to pro since it was allready purchased, all went well but dont know what it does more since i cant open the app loll, but it works, thats what counts
Click to expand...
Click to collapse
My experience is with Firestick.
1) On main Amazon screen, go to the App line and look accros there.
2) Connect Wukong Remote https://play.google.com/store/apps/details?id=com.wukongtv.wkremote.client.en and you'll see the Apps selection at bottom.
I like to go into Supersu settings and the default to "Grant" and I like to turn off notifications.
king200 said:
My experience is with Firestick.
1) On main Amazon screen, go to the App line and look accros there.
2) Connect Wukong Remote https://play.google.com/store/apps/details?id=com.wukongtv.wkremote.client.en and you'll see the Apps selection at bottom.
I like to go into Supersu settings and the default to "Grant" and I like to turn off notifications.
Click to expand...
Click to collapse
thks cool app but i still cant open super su , dont know after reading some that you even can
Arghhhh. Think I've soft bricked my fire tv or worse! I was re flashing the rom and was cleaning the data before hand, I must of wiped the system and now I'm only seeing the amazon white logo when i turn it on... Tried to install recovery again since I can't even get into recovery but when going through preloader it eventually says error can't find target file. Tried to use fast boot but fire tv isn't connecting to try and install recovery etc that way! You guys got any ideas or have I totally broken the device? ???
Keep calm buddy, als long as the preloader is still working everything is possible. Did you try to Flash TWRP again?
http://forum.xda-developers.com/fire-tv/development/firetv-2-unbrick-image-t3313349
Thank you so much! It saved the day! never will i ever be such a n00b and delete the entire system again. Also big thankyou RBOX for your guide and files to unbrick, they worked a dream. Everything is installed now, hopefully in near future someone manages to get SuperSu opening in the GUI lol im just happy I can actually use my fire tv again though!

Categories

Resources