I'll give my question first, then the history. I tried to search the EVO 4G subforums and couldn't seem to find it. If there's a post on this please kindly point me in the right direction.
Regardless of which ROM I install on my EVO except for what I understand is the engineering ROM or possibly the stock ROM, I go into a boot loop.
History:
- Did not install any updates or use unrevoked after receiving my EVO
- Did the root method known as "part 1" before NAND unlocking was available, never did any system updates. It seemed I had root because I was able to use the sudo "allow" or "deny" and use Wifi Tether in AP mode successfully (the open source APK)
- Was having some random reboot issues so I decided I needed to finally get an updated, custom ROM on my phone
- Yesterday spent many hours trying to get SimpleRoot to root my phone. However, ROM Manager keeps complaining it can't do privileged commands
- I was able to get Clockwork Recovery onto my phone finally using Unrevoked 3 just to get it on there (with what I know as the engineering ROM)
- Used clockwork to try and install Fresh 1.0.1, DamageControl v3.1.2 or seemingly anything other than that same engineering ROM (that has the HTC logo and sound) puts it into a boot loop. Also Clockwork (the APK) complains it still can't run privileged commands on that ROM from SimpleRoot.
I've been flashing a Kaiser/Tilt since forever but still pretty newb on Android but trying to learn fast. Love my EVO!
If there is any more information I can provide to help someone help me please let me know and hopefully this can help others not go astray as I have...
EDIT: Oh, yes and I read some of the troubleshooting information for different ROMs and one said to reformat sd-ext but my SD card is just formatted how it comes from the factory. I would really like to keep it that way unless it is a must for installing custom ROMs on the EVO. Clockwork did not seem to be able to do the partitioning for me.
EDIT: Now resolved after following thoroughly the directions listed here:
http://forum.xda-developers.com/showthread.php?t=721055
Thanks for helping me out!
aikeru said:
I'll give my question first, then the history. I tried to search the EVO 4G subforums and couldn't seem to find it. If there's a post on this please kindly point me in the right direction.
Regardless of which ROM I install on my EVO except for what I understand is the engineering ROM or possibly the stock ROM, I go into a boot loop.
History:
- Did not install any updates or use unrevoked after receiving my EVO
- Did the root method known as "part 1" before NAND unlocking was available, never did any system updates. It seemed I had root because I was able to use the sudo "allow" or "deny" and use Wifi Tether in AP mode successfully (the open source APK)
- Was having some random reboot issues so I decided I needed to finally get an updated, custom ROM on my phone
- Yesterday spent many hours trying to get SimpleRoot to root my phone. However, ROM Manager keeps complaining it can't do privileged commands
- I was able to get Clockwork Recovery onto my phone finally using Unrevoked 3 just to get it on there (with what I know as the engineering ROM)
- Used clockwork to try and install Fresh 1.0.1, DamageControl v3.1.2 or seemingly anything other than that same engineering ROM (that has the HTC logo and sound) puts it into a boot loop. Also Clockwork (the APK) complains it still can't run privileged commands on that ROM from SimpleRoot.
I've been flashing a Kaiser/Tilt since forever but still pretty newb on Android but trying to learn fast. Love my EVO!
If there is any more information I can provide to help someone help me please let me know and hopefully this can help others not go astray as I have...
EDIT: Oh, yes and I read some of the troubleshooting information for different ROMs and one said to reformat sd-ext but my SD card is just formatted how it comes from the factory. I would really like to keep it that way unless it is a must for installing custom ROMs on the EVO. Clockwork did not seem to be able to do the partitioning for me.
Click to expand...
Click to collapse
i had a similar issue, and so did a few people. i wrote out a post some time ago, i don't know if you read it...
http://forum.xda-developers.com/showpost.php?p=7204861&postcount=4
try that out. let me know how it goes.
EDIT: it also sounds like you don't have nand unlocked.
Thank you for your quick reply! I will try it and report back what I did, what works/didn't.
As a side note...
Since I have Clockwork on the recovery (I can boot to recovery all day long just using volume up and clockwork is there) doesn't that mean NAND is unlocked? Anyway, thank you again.
aikeru said:
Thank you for your quick reply! I will try it and report back what I did, what works/didn't.
As a side note...
Since I have Clockwork on the recovery (I can boot to recovery all day long just using volume up and clockwork is there) doesn't that mean NAND is unlocked? Anyway, thank you again.
Click to expand...
Click to collapse
having a boot recovery program doesn't necessarily mean you have nand unlocked. the ability to flash custom roms does though. good luck! i know it's frustrating, but keep at it.
silly question but are you wiping correctly ?
I had to ask...
elegantai said:
silly question but are you wiping correctly ?
I had to ask...
Click to expand...
Click to collapse
i almost spilled my drink LOL
elegantai said:
silly question but are you wiping correctly ?
I had to ask...
Click to expand...
Click to collapse
lol XD nice ... any comeback I can think of just goes way too far
Well, I've downloaded the files so sometime this evening/tonight I should have results. That post links to what appears to be a very, very thorough set of instructions
http://forum.xda-developers.com/showthread.php?t=721055
So I'll go through the whole thing there and of course report back
aikeru said:
lol XD nice ... any comeback I can think of just goes way too far
Well, I've downloaded the files so sometime this evening/tonight I should have results. That post links to what appears to be a very, very thorough set of instructions
http://forum.xda-developers.com/showthread.php?t=721055
So I'll go through the whole thing there and of course report back
Click to expand...
Click to collapse
lol good luck buddy. it's a relatively easy walkthrough if you follow it closely. post up any questions you have.
Hello everyone.
I enjoyed the noob video and also look forward to being pasted no doubt.
I have a wildfire running 2.2 android which I understand means I am running the latest firmware, which I also understand is going to make it difficult for me to root easily.
Never the less not being one to be beaten I have tried with EVO3, which no matter what I tried would not work, constantly asking if my firmware was too new. I even wiped it but no luck.
So I struck upon revolutionary, which yes I understand is beta.
This is perhaps where my lack of understanding comes in. Would I be right in thinking that custom roms require a specificly rooted device?
The thing is I have apparently been successfull with revolutionary. I can boot into it and I was able to instaly cryongena rom which worked OK until I installed google apps where by it constantaly showed the spinning blue arrow, round and round, rebooting and rebooting.
Thing is all other roms I have tried, everyone, has failed, with either script being old 'error 6' etc etc.
I found I needed a different kind of rom, which a few were offering however these also failed with error 6 which apparent was something to do with not being pure unix or something.
Sorry I am not up on the language, but I think I have tried all the popular ones, puzzle etc and none will install.
When I start up with the volume button pressed it shows the screen then says something about failing to load image, but goes away to quick to read pc4diag.img or something.
Is it possible I have not loaded revolutionary correctly, and have I gained 'root'
Thanks for reading, and please feel free to tear me a new one.
- Yes, I am sure you have Revolutionary installed correctly. You got a bootloop while installing GApps, in which case I would recommend performing a full wipe in Clockworkmod and try to install again. (Install the CM ROM first, then the GAPps Zip. Also, I hope you are using a filename called gapps-gb-2011xxxx.zip)
- If you want to install other ROMs, Sense and Android 2.2.1 ROMs require Clockworkmod 2.x. Attempting to flash them in Clockworkmod 3.x/4.x will give you the "Scripting not supported" error. The workaround to this is to download this attachment:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
Flash this in your new Clockworkmod Version, which will give you temporary 2.5, then proceed as normal.
- When you boot into the HBoot Mode, it will automatically perform a search for the files PC49IMG.diag and .nbh. It's normal, and theres nothing to worry about. After the search is over, and, it has not found the files, you can navigate properly again.
Oh, and I think you are being too paranoid about the video and everyone here trying to tear you a new one.
Good Luck
Thanks very much for your answer.
Honestly I spent 2 hours on google last night trying to get my head around it.
To be honest all I want is a quick phone, and I am not getting that with stock software on my wildfire, I get very frustrated when trying to scroll but it reads it as me tapping an app icon, and there are loads of them I don't want in here, footsteps and tweets and the likes, I am simply not interested and neither am I allowed to remove them. The cynogenmod looked amazing, but I can see even more processor intensive than the stock software.
I will have a look at what you have suggested and thanks for your help!
In that case, I think you might want to stick with the Stock ROM, and, get an app like 'Root Uninstaller' or 'Titanium Backup' which allows you to uninstall (Or, to be more correct - 'freeze') any apps you wish - Including System Apps.
Not trying to advertise Cyanogenmod here, since I understand ROM preference is a personal thing, but, I would recommend giving it one more try, after a full wipe. Also, go with the latest nightlies rather than the Stables. I have been using it since it was released back in January, and, honestly, I am never going back to Stock / Sense based ROMs.
Don't get me wrong it looks awesome. But the boot up time was just shy of 4 minutes (although I now understand it may have been because of first boot) and two attempts at install failed.
I shall look at how to fully wipe, but to be honest, being very new to hacking my phone I am quite happy having the back up there to revert too.
Well I tried to install anything but nothing works so I shall revert to my original back up and see about these tools for removing unwanted apps.
Thanks for the help, but something is not right. All roms either get as far as the twinkly noise on the HTC screen then do it again and again, and cynogen gets to the rotating arrow, then eventually an android zips across the screen and back to the arrow
Well I don't think I have root on this device. I tried to install busybox and titanium and both tell me my phone is not rooted.
Sigh.
If you are on the Stock ROM, you will have to flash this additionally:
http://bit.ly/su2361ef
This will install Superuser, which is what will give you "root". If you are on Custom ROMs, flashing this additional file is not required, since, they include the Superuser Binary already,. So, flash that, and then try installing Busybox / Ti Backup. (make sure you get a "superuser" icon in your app drawer after flashing that zip)
EDIT:
- Are you on Clockworkmod 3.0.0.6 incidentally? That version has caused bootloops for many users when installing ROM's.
- First boot time is extremely long (Upto 7-8 mins), and its normal.
Hello thanks for the info.
I am not confident I know what mod I am on, I just went to the revolutionary website and downloaded the latest beta.
When you say it can take 7-8mins to load up would this include the boot loops though? Thats all I get on all of them
I shall install the super user bit see if that helps.
No, not including bootloops. BTW, I am referring to the Clockworkmod Version, not Revolutionary,
When you enter the Recovery to flash something, at the bottom, you will "Clockworkmod Version x.x.x.x". It is that version I was asking.
Sadly I am not getting anywhere here, every single rom just goes round in circles in one way or another.
The version say revolutionary CWM v4.0.1.4
I was unable to get the standard revoked installed as I am runnning the latest android firmware and it just kept failing.
Something I am getting rather used to!
I cannot see a clockwork mod number anywhere, although it must be there as I have clockwork folder on the SD card.
Sorry, I am being a muppet here.
Alright, first and foremost, I'm sure this has been answered probably at least 10 times in this section, however, I'm not entirely sure of the locations of those threads nor do I retain any interest in trying to look for them. My apologies.
I come from the HTC Evo, and things were set up a little differently over there. Here it seems the recovery is tied in with the kernel? Can somebody explain this to me? It seems a little unnecessary to have these two tied together, but maybe I'm just not understanding the concept. With the Evo, you either had Clockword, or you had Amon RA, it was very simple. With this phone, it seems as if the devs are having a little contest as to who can create the coolest/smoothest/best recovery. In my eyes, if the recovery flashes, wipes and performs backups as needed, it should be left alone. I feel as if more time could be spent on future development of the Roms instead of the recoveries.
Again, I'm sure this has been answered. Also, just to clarify, I am in no way a developer of any kind. I have absolutely no idea what goes into the physical coding process. I'm very thrilled that we have the hard working developers that we do, I simply had a rise in curiosity.
I came from the G2, and to get recovery, I just flashed it using ROM manager. Simple.
Here, it seems that the recovery is not "tied" with the kernel, it just comes with it. Like an extra package. You can still get recovery and have stock kernel. I had that for a while. The root method I've seen for this phone required you to flash a kernel, and it just came with CWM already.
You can still flash CWM if without the need of any type of kernel, as long as you're root.
Anyone please feel free to correct me if I was wrong, but this is what I've observed. I'm on my way to trying and becoming a developer, so any criticism will be well took.
I have had my G2 for about 18 months and have been running into a lot of issues recently. I've decided to fix those issues by rooting & getting a new ROM installed. I'm a tech savvy guy, but have not done anything on the phone end due to not wanting to break whats working. I've decided to go with the Mimicry 1.3.2 ROM since the install process uses Aroma and is very straight forward. Before I pull the trigger, I just want to make sure I have all the steps clear so that I don't go "Oh sh**" in the middle because I missed a step. There's also a couple of steps that I'm not clear on. Here's what I researched:
-Root phone using HTC's bootloader unlocker
-Format phone's flash memory to EXT4
--What is the best app to do this with? Will my phone work with Gingerbread after I make this change?
-Download Mimicry 1.3.2 and Google Apps put the zip files on my phone (not SD card)
-Power off phone and then push the volume down and power buttons together and choose to install the ROM
-Answer prompts in Aroma (including installing WiFi calling)
-Flash Google apps
--How exactly is that done?
-Restart phone and start setting up apps again.
Does that look correct and is there anything that I'm missing? Thank you in advance for your help.
Well first off I would stay away from HTC official unlocked bootloader, its worthless and will give you headaches in the future
use the wiki to root, either follow the wiki in cyanogen or here on xda, if you even slightly tech savvy it will be easy
following that guide you will have clockwork recovery, but I suggest moving to 4ext recovery, among many reasons is the ability to format to ext4. Otherwise the next easiest way to format would be to flash a super wipe script with ext4 format written to it (just search xda and you'll find it easier)
Now after you are rooted with an engineering s-off hboot consider flash the .19 radio, not super important but many find this to have the best reception and battery life.
Next make sure your SD card is fat32, I also suggest an ext4 partition there as well (easily done through recovery) but skip the swap
Now feel free to flash mimicry, and may I add this is one other best ICS Roms for the vision, and blk_jck is a very helpful Dev as well.
Good luck, if you run into issues there will be answers all over xda, just search a bit, happy flashing!
Sent from my Nexus 7 using xda premium
Thanks
Thanks for the heads up on the HTC bootloader. I'll check out the Wiki on how to PermRoot my phone.
Mimicry, recovery, soft bricks, and new ROM
Agree with demkantor, the step-by-steps so painstakingly described in cyanwiki are your best bet.
Likewise, using 4ext in place of clockwork is also my recommendation, as I've used both now and
find the latter more polished and stable.
I recently rooted and updated for the first time. Got successfully as far as ICS using cyan's instruction,
then decided to use mimicry after reading about the radio updates etc posted by madmaxx. I think the sequence in which i
carried these out was flawed, because after updating the radio instruction sets, I re-flashed mimicry to take advantage of the
updated radio features and to install the wi-fi telephony; that was my downfall. I got caught in a boot-loop. Oh sh*t, indeed.
I could not, for the life of me, get past the HTC white screen. Being a total noob, I had no
idea where to go to next. I searched this website and cyan's a lot, and realised the term for what I now had was a 'soft
brick' or 'semi brick'. Could not get the device to be recognised via ADB, and could not access the sdcard directory.
I scratched my head for a few days (I had bought another phone prior to playing with the old G2), and came up with the
idea of just accessing the sdcard via my laptop, directly. In the midst of this, I turned on the phone (after taking the card
out), and voila, the phone now cycled into engineering hboot !
I subsequently was able to edit the sdcard directly via the laptop (using an micro sd card adapter), and removed the pc10?.img file
that was left over the radio update. Having recovered to this point, I re-flashed mimicry 1.3.1 (via 4ext) and so was able to get a completely
functional phone again.
The point of all of the is this: 1. To all the previous post-ers, both here and at cyanwiki...You guys rock. Can't say that enough. Even more:
2. A 'soft brick' may be anything but...a little bit of not-very-complicated experimentation afterward can pay off big time. Lastly, I tried
mimicry 1.3.2, but kept getting a heap of error messages. Needless to say, I was a bit spooked by the previous stuff-up, so I quickly reverted
to 1.3.1, which appears to be 100% stable (IMHO).
Cheers
1.3.2 adds few framework level changes and no device level changes. Definitely nothing that should cause errors or problems booting anyway.
Sent from my HTC Vision using xda premium
Good Info
timram said:
Agree with demkantor, the step-by-steps so painstakingly described in cyanwiki are your best bet.
Likewise, using 4ext in place of clockwork is also my recommendation, as I've used both now and
find the latter more polished and stable.
I recently rooted and updated for the first time. Got successfully as far as ICS using cyan's instruction,
then decided to use mimicry after reading about the radio updates etc posted by madmaxx. I think the sequence in which i
carried these out was flawed, because after updating the radio instruction sets, I re-flashed mimicry to take advantage of the
updated radio features and to install the wi-fi telephony; that was my downfall. I got caught in a boot-loop. Oh sh*t, indeed.
I could not, for the life of me, get past the HTC white screen. Being a total noob, I had no
idea where to go to next. I searched this website and cyan's a lot, and realised the term for what I now had was a 'soft
brick' or 'semi brick'. Could not get the device to be recognised via ADB, and could not access the sdcard directory.
I scratched my head for a few days (I had bought another phone prior to playing with the old G2), and came up with the
idea of just accessing the sdcard via my laptop, directly. In the midst of this, I turned on the phone (after taking the card
out), and voila, the phone now cycled into engineering hboot !
I subsequently was able to edit the sdcard directly via the laptop (using an micro sd card adapter), and removed the pc10?.img file
that was left over the radio update. Having recovered to this point, I re-flashed mimicry 1.3.1 (via 4ext) and so was able to get a completely
functional phone again.
The point of all of the is this: 1. To all the previous post-ers, both here and at cyanwiki...You guys rock. Can't say that enough. Even more:
2. A 'soft brick' may be anything but...a little bit of not-very-complicated experimentation afterward can pay off big time. Lastly, I tried
mimicry 1.3.2, but kept getting a heap of error messages. Needless to say, I was a bit spooked by the previous stuff-up, so I quickly reverted
to 1.3.1, which appears to be 100% stable (IMHO).
Cheers
Click to expand...
Click to collapse
Thanks for that info. I am taking a look at the Cyanogen Wiki and seeing what I have to do. I'm thinking that I will jump directly to Mimicry 1.3.2 instead of installing Cyanogen 9 first. Hopefully that file doesn't hang out there and causes that boot loop to happen to me (thanks for that explanation, BTW).
So do I have to use that ClockworkMod to load the ROM, or does EXT4 do the same thing (as far as loading the rom goes)?
...where thanks is due
many thx, blk jack, I should have specifically mentioned your awesome contributions as well, and
have remedied with thanks meter as i came/come across it.
Will re-try the 1.3.2 shortly. If I run in to the same glitches, I will try and make note of the specific errors
(or any other bugs, for that matter) and let you know.
Use the following guide, it is incredibly simple yet swift. Contains root methods for both the DesireZ and the T-Mobile G2 :
http://wiki.cyanogenmod.com/wiki/TMobile_G2:_Rooting
Checking it out now
iamnoobie said:
Use the following guide, it is incredibly simple yet swift. Contains root methods for both the DesireZ and the T-Mobile G2 :
Click to expand...
Click to collapse
I'm actually looking at that wiki right now. I just finished backing up all the contents on my SD card. I can't backup the apps on my phone since it's not rooted, and I can't use a backup app unless I'm root. So it looks like that is a catch 22. Personally, I don't mind wiping everything anyways since I'm going to be making the jump to ICS. I guess I'll have to beat all those levels in cut the rope again :crying:
@deadeye
actually, the only important bits are your contacts, sms's, phone logs, etc (if these matter to you), which i think you can backup via gmail. Additionally, any other (or all) files on the SD card, you should be able to just copy directly onto a folder in your laptop or desktop (see the post I made above). HTH.
timram said:
@deadeye
actually, the only important bits are your contacts, sms's, phone logs, etc (if these matter to you), which i think you can backup via gmail. Additionally, any other (or all) files on the SD card, you should be able to just copy directly onto a folder in your laptop or desktop (see the post I made above). HTH.
Click to expand...
Click to collapse
Thanks for that. I've now downloaded the Android SDK and am now trying to test the connection to my G2 using adb. So far, no connection. Grrrr. I'm looking around now to see how to get my phone detected by adb since it doesn't seem to have anything on the cyanogen wiki.
you downloaded adb.exe from within the sdk right? find the folder it is in (usualy platform tools) hold shift right click within the folder and choose open command here
now type adb devices, you should se some letters and numbers that means you good if not need to trouble shoot some more
alternatively you can change the path within enviromental variables so you can open a cmd anywhere
Sent from my HTC Vision using xda premium
HTC Sync
demkantor said:
you downloaded adb.exe from within the sdk right? find the folder it is in (usualy platform tools) hold shift right click within the folder and choose open command here
now type adb devices, you should se some letters and numbers that means you good if not need to trouble shoot some more
alternatively you can change the path within enviromental variables so you can open a cmd anywhere
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
I tried the adb devices command and it didn't return any connected devices. Looking in the xda wiki, they are saying that I need to have HTC Sync installed. I'm downloading that right now. They probably should put that in the cyanogenmod wiki also.
I got my phone detected by adb! I did some preliminary checking and I think I should be good to go on rooting. I think I will root my phone tomorrow when I have plenty of time to troubleshoot any issues that my come up.
This is just the thread I was looking for. I'm also an old (60) tech-savvy guy who has never rooted his phone, and was nervous about which set of rooting instructions (cyan-wiki or Setherio/Strawmetal?; the latter is more recently updated, seems a bit more detailed, and has newer versions of some utilities) which recovery, ClockworkMod or ext4, and which ROM, Cm9 unofficial or mimicry or even AOKP...
You all seem to feel cyan-wiki instructions better (right?) ext4 and mimicry... Shall I go for it? Last suggestions?
Thanks,
Dave
Sent from my T-Mobile G2 using xda app-developers app
prairie-dad said:
You all seem to feel cyan-wiki instructions better (right?) ext4 and mimicry... Shall I go for it? Last suggestions?
Click to expand...
Click to collapse
Cyan wiki worked for me! (strawmetal didn't - I blame myself though).
ext4 and mimicry are what I'm running now (after going through CWM, CM 7.2 and CM9 RC1 & RC2) and I'm very happy with both. Mimicry is great!
prairie-dad said:
This is just the thread I was looking for. I'm also an old (60) tech-savvy guy who has never rooted his phone, and was nervous about which set of rooting instructions (cyan-wiki or Setherio/Strawmetal?; the latter is more recently updated, seems a bit more detailed, and has newer versions of some utilities) which recovery, ClockworkMod or ext4, and which ROM, Cm9 unofficial or mimicry or even AOKP...
You all seem to feel cyan-wiki instructions better (right?) ext4 and mimicry... Shall I go for it? Last suggestions?
Thanks,
Dave
Sent from my T-Mobile G2 using xda app-developers app
Click to expand...
Click to collapse
setherios guide is just for the downgrade process
the cyanogen wiki, xda wiki, and strawmetals pdf guide are all more or less the same guide, just writen a tad differently
as for the recovery 4ext is far superior but feel free to switch recoveries later if it complicates thing, very easy to do
as for a rom choice there are many good ones and it will be hard to recommened one so try a few, make nandroid backups, and see where your prefernce lies. if you like ics then my personal opinions are elitemod ics or mimicry, both are great. don't care much for sense so you will have to explore by yourself on those (you will need the dz hboot if you want any sense roms - easily done)
if you want gingerbread try ilwt or elitemod cm7 (this is still the rom I almost always use, even curently)
have fun, read, read some more, search when stuck... this is should all be easy as you say your tech savvy - happy flashing!
Sent from my HTC Vision using xda premium
minor glitches, but rooted and s-off fine
demkantor said:
setherios guide is just for the downgrade process
the cyanogen wiki, xda wiki, and strawmetals pdf guide are all more or less the same guide, just writen a tad differently
as for the recovery 4ext is far superior but feel free to switch recoveries later if it complicates thing, very easy to do
as for a rom choice there are many good ones and it will be hard to recommened one so try a few, make nandroid backups, and see where your prefernce lies. if you like ics then my personal opinions are elitemod ics or mimicry, both are great. don't care much for sense so you will have to explore by yourself on those (you will need the dz hboot if you want any sense roms - easily done)
if you want gingerbread try ilwt or elitemod cm7 (this is still the rom I almost always use, even curently)
have fun, read, read some more, search when stuck... this is should all be easy as you say your tech savvy - happy flashing!
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
all went well till the very, very, very end. I went to reboot into clockwork recovery, and...nothing doing! holding down the trackball, volume down and power...and waiting and waiting...just got me into the bootloader with no option to go to recovery...just reboot, reboot the boot loader, and power down.
So I thought, maybe I somehow failed to get the recovery img where I wanted it...no big deal. I logged onto the old Market (this is 2.2, after all) and purchased 4ext (which is what seems to be everyone's choice) and installed it. Then I said I wanted to reboot with mimicry and gapps, hit "go," and...it rebooted into ClockworkMod Recovery...where it now sits, I assume backing up the existing system. Mimicry 1.3.2 and gapps images were sitting on my sdcard root, btw.
Very odd, and a little perplexing...I will wait it out a while before powering off and up again.
any thoughts? Must I remove clockwork mod manually (I assume that when I installed 4ext it made itselfthe default recovery method...) or does 4ext just sit atop Clockwork Mod...and what I am seeing now is normal...? I've been waiting a few minutes now, and see nothing but the Clockword Mod icon, the top hat.
Sigh...but pretty clearly almost all the way home.
Thanks to all,
dave
I've never used an app to install a recovery, always used fastboot.
But to answer your question 4ext does replace clockwork, it does not sit on top of it. Just downloading the app well... downloads the app. You must then go into the app and choose to download and install the recovery, after this from within the recovery flash your ROM (and gapps etc. If needed)
I have the 4ext app just for the purpose of supporting the Dev as anything that does me good deserves my money but I really have never bothered much with it so off hand I can't tell you the exact steps to do this but I'm sure it s very straight forward.
Good luck and let us know how all turns out
Sent from my Nexus 7 using xda premium
darn ClockWorkMod/4ext clash!
demkantor said:
I've never used an app to install a recovery, always used fastboot.
But to answer your question 4ext does replace clockwork, it does not sit on top of it. Just downloading the app well... downloads the app. You must then go into the app and choose to download and install the recovery, after this from within the recovery flash your ROM (and gapps etc. If needed)
I have the 4ext app just for the purpose of supporting the Dev as anything that does me good deserves my money but I really have never bothered much with it so off hand I can't tell you the exact steps to do this but I'm sure it s very straight forward.
Good luck and let us know how all turns out
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Thanks...I sat and looked at it for a while, then hit power, and up came the ClockworkMod menu...and did nothing. When I asked _it_ to load a zip from the sdcard...it still sat there stupidly...nice menu but no action. so I rebooted with trackball/volume-down and power...and still can't get to the bootloader menu...the only way is to attach via usb, and do adb reboot bootloader...which gives me a bootloader menu showing no recovery app...just the same options as before. ugh. I wonder what the recovery.img is...? I went through the steps of installing 4ext...and it said it had installed itself.
well, I will poke around a tad more...midnight now...at least I have a working phone on 2.2, rooted, S-OFF, etc.
dave
---------- Post added at 07:33 AM ---------- Previous post was at 06:42 AM ----------
prairie-dad said:
Thanks...I sat and looked at it for a while, then hit power, and up came the ClockworkMod menu...and did nothing. When I asked _it_ to load a zip from the sdcard...it still sat there stupidly...nice menu but no action. so I rebooted with trackball/volume-down and power...and still can't get to the bootloader menu...the only way is to attach via usb, and do adb reboot bootloader...which gives me a bootloader menu showing no recovery app...just the same options as before. ugh. I wonder what the recovery.img is...? I went through the steps of installing 4ext...and it said it had installed itself.
well, I will poke around a tad more...midnight now...at least I have a working phone on 2.2, rooted, S-OFF, etc.
dave
Click to expand...
Click to collapse
Mimicry is booting now. All good. I ended up using the clockwork mod version, 3. something, that I installed when following (too slavishly?) the CM wiki's instructions (otherwise excellent!) Then (and now) I have problems booting into the bootloader, and it doesn't show a recovery option... Running 4ext (which I purchased) seems to be great (looks really useful) until rebooting...when CWM comes up instead.
I kept using volume up or down to pick what I wanted, then pushed the power button to select...wrong! It's the trackball you click, which I only hit upon by accident. Once I got that working, I flashed mimicry and Gapps, and I am off to the races again.
Thanks to all, but I want to figure out what is with recovery for the future.
What buttons do I push to get to bootloader...so far all I have gotten to work is via USB cable and "dab reboot boot loader."
dave
As the title says, I am running gedeROM 1.55 for the past year, since I experimented with a couple ROM's and settled on this one. For the most part its been a decent daily driver but have found it a little 'sluggish' lately and it annoys me. The lack of deep sleep keeps me always scrambling to keep it charged and ready to go so I don't find it dead when I want to use it.
Of course in the process I am using an older version of FFF and TWRP, so I know an update of them would be necessary.
A couple questions, looking for opinions:
1. Is it possible to just use KFU and update FFF and TWRP without disturbing everything else? I'd like to get them up to date.
2. After reading for 2 hours or more I am unclear on the limitations of 10.1 JB and wonder if I should be changing to JB at all?
3. Are the 10.1 ROM's a better option than I am running for speed and reliability? If so, any shining star amongst them?
I know asking for opinions will bore most people to death reading this, but I need some guidance from those that have been active and keeping up with ROM dev on this unit while I left mine alone and got behind.
Thanks in advance.
This might help you:
1. Look on the first post of this thread. Theres a flashable zip for FFF1.4 (Just flash in TWRP)
2. Here is Ichigo's flashable zip for TWRP 2.5.0 (Just flash in TWRP) https://www.dropbox.com/s/b4idirzkmgvnm07/TWRP-Blaze-2.5.0.0.zip
Those will not disturb anything else.
And try This ROM first and see if you like 4.2.2. This is the OFFICIAL cyanogenmod 10.1. To me its by far the best in terms of stability and speed. Make sure you wipe everything BUT /sdcard in TWRP before you flash!
Moving to a recent JB ROM will be a good move compared to gede because not only will you have better battery life but you'll have almost another year of improvements made to the Kindle since then.
Thanks for the info.... I'm gonna give this a shot I think. Not much to lose, nothing mission-critical on my tablet anyway
I'll post back once it's done!
Thanks again.
Bozz5384
It seems to have gone well, thanks for all the info. Updated FFF, TWRP, and now on CM 10.1 ... I did the 5/20 nightly, wasn't sure which one to do -- seems pretty bug free at this point.