Hey guys i'm new to this...
But please can somebody guide me i really want to get my kindle fire updated to hashcode's new ROM but the links he has posted are not working i have checked them for like a million times.
Your help in this regard shall be highly appreciated.
Thankyou.
The link on this page works fine download starts automatically to my kindle so on a computer it should work fine as well http://forum.xda-developers.com/showthread.php?t=1591850 or just flash it from your download folder on you kindle works fine for me I do it all the time...
Thepooch said:
The link on this page works fine download starts automatically to my kindle so on a computer it should work fine as well http://forum.xda-developers.com/showthread.php?t=1591850 or just flash it from your download folder on you kindle works fine for me I do it all the time...
Click to expand...
Click to collapse
Thankyou very much for helping out. It really helped me alot.
Related
I tried to root my kindle fire but failed... Then i proceed to do a factory reset from the kindle fire, after reboot I stuck on kindle fire screen.
I have already installed Kindle Fire TWRP.
under my kindle utility it shows my boot status as unknown.
please help!!! Many thanks....
I just hope can reset to its original setting.
If you can boot into TWRP kfu will recognize it.. if not then you should mount it in TWRP...
hi fiddlefaddle, thanks for your reply...
i tried to boot into TWRP but were unable...
what u mean by mount it in TWRP...
sorry i am a noob... hope u can explain to me further..
many thanks
hi fiddlefaddle
i manage to boot into TWRP...
can i know what should i do next in order be able to use my kindle fire again?
thanks...
Not to be rude but try searching for your answers.. I picked up a KF last night for my fiancée it was rooted but restored to stock rom.. I tried getting it to allow prime videos and hosed it up big time. I I was getting fire logos loops all kinds of madness but I hopped on xda did some research now her kf is working with prime video and side installed apps and ADW Launcher as well as stock kf launcher..
Sent from my GT-P7310 using Tapatalk 2 Beta-5
hi prasket...
I am sorry if i sounded like i did not do any searching or research on resolving this issue..
In fact i have been searching on the webby for the whole day looking for the answers and found many.. but none were able to work for me... It may be due to my limited capabilities in understanding and therefore i am seeking for help in this forum...
I believe the purpose of this forum is to share and help out everyone in any way possible.... Its good that you have bought a KF for your finacee but i dun see any rationale in boasting here what you have achieved... not everyone is able to resolve everything just by doing some research like you.
I am just a sincere noob KF user who is looking for some help... Appreciate if i can have some constructive comments instead... thanks
shaoqun said:
hi prasket...
I am sorry if i sounded like i did not do any searching or research on resolving this issue..
In fact i have been searching on the webby for the whole day looking for the answers and found many.. but none were able to work for me... It may be due to my limited capabilities in understanding and therefore i am seeking for help in this forum...
I believe the purpose of this forum is to share and help out everyone in any way possible.... Its good that you have bought a KF for your finacee but i dun see any rationale in boasting here what you have achieved... not everyone is able to resolve everything just by doing some research like you.
I am just a sincere noob KF user who is looking for some help... Appreciate if i can have some constructive comments instead... thanks
Click to expand...
Click to collapse
My suggestion would be to take some time out to read over the first two posts in this thread...
http://forum.xda-developers.com/showthread.php?t=1552547
The first will help you get some basic understanding of how these pieces fit together. If you are using Windows, the second makes sure you have the device drivers installed correctly. Once you've done that, you'll want to set the bootmode on your device back to normal using KFU. Provided the Kindle Fire software is working correctly, you should be able to reboot and get it working normally again.
kinfauns said:
My suggestion would be to take some time out to read over the first two posts in this thread...
http://forum.xda-developers.com/showthread.php?t=1552547
The first will help you get some basic understanding of how these pieces fit together. If you are using Windows, the second makes sure you have the device drivers installed correctly. Once you've done that, you'll want to set the bootmode on your device back to normal using KFU. Provided the Kindle Fire software is working correctly, you should be able to reboot and get it working normally again.
Click to expand...
Click to collapse
ok noted... thanks kinfauns
If you're still having trouble, try using zombiepiratez's unbrick utility
http://forum.xda-developers.com/showthread.php?t=1428428
I had a similar problem and was able to fix it using the utility
I am running the eye candy rom on my wifes kindle and she loves it but when i try to download the 3.6v beta onto my computer it goes to a screen that basically says that i need to enable java script but here lies the problem my javascript is enabled. has anyone else had any problems trying to download this. any other possible sollutions. I tried the mirror ones on the screen but get the same thing
I download directly to my kindle, no problem. Is that what you do?
Sent from my Amazon Kindle Fire using xda app-developers app
fireman928 said:
I am running the eye candy rom on my wifes kindle and she loves it but when i try to download the 3.6v beta onto my computer it goes to a screen that basically says that i need to enable java script but here lies the problem my javascript is enabled. has anyone else had any problems trying to download this. any other possible sollutions. I tried the mirror ones on the screen but get the same thing
Click to expand...
Click to collapse
I downloaded the Rom yesterday on my computer
transfer it to the kindle and today i have installed it
works fine no problems.
i usually download directly to computer then transfer over to kindle but some reason i cant download it cause of the screen i stated before i havent tried to download directly to the kindle ill try that right now. im assuming the goo.im wont work cause i dont think pimp put it on there and when i check for update on there there are none
it is downloading directly to my wifes kindle i still dont get why when i click on the V3.6 to download i get this message
{"INFO":"failed posted hashcheck","SOLUTION":"please make sure you have javascript enabled for androidfilehost.com. Hit the back button, enable javascript and try again please. we promise we are probably not doing anything nefarious. maybe. no promises though."}
and i have tried the instructions it says
Hello All XDA members,
I have a Kindle HD 8.9 and as the warranty passed off, at the same time Christmas is nearing...I decided to install CM KK on my sons kindle as i don't have enough money to give a present to my son.
I've done all that is given here : http://forum.xda-developers.com/showthread.php?t=2100963.
Problems I've faced are as the thread didn't mention to root I was trying some codes without that but some how figured that i needed root to proceed..Simultaneously rooted my kindle rebooted and then proceeded with the codes i.e backup of system img and all the steps that were given.
I has all the downloaded files in download directory so the stack push didn't work first then i moved all the required files to C> ADB folder and everything worked but before figuring it out i googled stack file push failure and came across a guide that has the stack push directory to data/temp (I see that this was later edited here)
However i retried with the push to the location that is currently mentioned now and it worked (So the stack file is at 2 locations now)
Proceeded with all next steps and stuck at flashing bin file in fastboot, realized the downloaded file was .bin.html i renamed it to bin and flashed
Everything was done as mentioned except something that needed to be understood and done by logical thinking like removing .html and flashing .bin.
After all this when the kindle was supposed to reboot it didn't and its completely dead now... I have done all that was mentioned and have said all the errors or misses that i has above ..now is it that the kindle is dead brick forever ?
I cant trust how can that be because i really know how cautious i was and i did almost every thing as mentioned..
Saddest part is that now I've messed up my sons kindle which i thought of Flashing CM KK and giving a little gift as i'm not capable of providing any gift now ..I've messed his kindle as well now
I'd be really glad and thankful if some one can help me out in this situation and recover kindle.
Again i'd like to mention I've done as mentioned please trust me and still have the image backups, i read that the back up can be reflashed but as there is no commuication via ADB or flashboot i don't thing that can be done now .
Why did this happen what can be possible reason ?
Sounds like you may have accidently saved a webpage instead of the .bin file, that's why it had the .html on the end. If you tried to flash this to the bootloader then unfortunately you have bricked it
Broncos15 said:
Sounds like you may have accidently saved a webpage instead of the .bin file, that's why it had the .html on the end. If you tried to flash this to the bootloader then unfortunately you have bricked it
Click to expand...
Click to collapse
No if that was the case then why will the file bo .bin.html ?
Mr.Dumb said:
No if that was the case then why will the file bo .bin.html ?
Click to expand...
Click to collapse
It shouldn't have .html on the end. Check the md5 sum for the file and make sure that it is the same as it should be, you should ALWAYS do this when messing with the bootloader
Maybe you flashed wrong images.
I just went to the link of the guide that you followed in flashing a second bootloader and recovery. The instructions are for a Kindle Fire 2/ Otter2. Its a different device from the KF HD 8.9. So.... if you did flash the images from that link, it will lead to a bricked device no matter if you followed the instructions to the letter. Maybe you can sell it on ebay or Craigslist for parts. Just a thought...
maxaurelius said:
I just went to the link of the guide that you followed in flashing a second bootloader and recovery. The instructions are for a Kindle Fire 2/ Otter2. Its a different device from the KF HD 8.9. So.... if you did flash the images from that link, it will lead to a bricked device no matter if you followed the instructions to the letter. Maybe you can sell it on ebay or Craigslist for parts. Just a thought...
Click to expand...
Click to collapse
I actually plan on doing this for a similar reason. My sons kindle battery life is appalling as it drains faster than before and charges slower, plus kindle updates are lacking badly and some things don't work anymore.
I hope you can fix it somehow.
Happy new year.
Mr.Dumb said:
Hello All XDA members,
I have a Kindle HD 8.9 and as the warranty passed off, at the same time Christmas is nearing...I decided to install CM KK on my sons kindle as i don't have enough money to give a present to my son.
I've done all that is given here : http://forum.xda-developers.com/showthread.php?t=2100963.
Problems I've faced are as the thread didn't mention to root I was trying some codes without that but some how figured that i needed root to proceed..Simultaneously rooted my kindle rebooted and then proceeded with the codes i.e backup of system img and all the steps that were given.
I has all the downloaded files in download directory so the stack push didn't work first then i moved all the required files to C> ADB folder and everything worked but before figuring it out i googled stack file push failure and came across a guide that has the stack push directory to data/temp (I see that this was later edited here)
However i retried with the push to the location that is currently mentioned now and it worked (So the stack file is at 2 locations now)
Proceeded with all next steps and stuck at flashing bin file in fastboot, realized the downloaded file was .bin.html i renamed it to bin and flashed
Everything was done as mentioned except something that needed to be understood and done by logical thinking like removing .html and flashing .bin.
After all this when the kindle was supposed to reboot it didn't and its completely dead now... I have done all that was mentioned and have said all the errors or misses that i has above ..now is it that the kindle is dead brick forever ?
I cant trust how can that be because i really know how cautious i was and i did almost every thing as mentioned..
Saddest part is that now I've messed up my sons kindle which i thought of Flashing CM KK and giving a little gift as i'm not capable of providing any gift now ..I've messed his kindle as well now
I'd be really glad and thankful if some one can help me out in this situation and recover kindle.
Again i'd like to mention I've done as mentioned please trust me and still have the image backups, i read that the back up can be reflashed but as there is no commuication via ADB or flashboot i don't thing that can be done now .
Why did this happen what can be possible reason ?
Click to expand...
Click to collapse
As stated by Max above, if you flashed those images from that thread you linked to in your post, then those are the incorrect files for your device. and would have definitely bricked it! assuming you do have the FFHD 8.9 inch. but you still may be able to unbrick it. are you positive of which kindle device you have? if you are positive that it is indeed a KFHD 8.9, do you know which version it was on before you started the OP?
Mike
11fan said:
As stated by Max above, if you flashed those images from that thread you linked to in your post, then those are the incorrect files for your device. and would have definitely bricked it! assuming you do have the FFHD 8.9 inch. but you still may be able to unbrick it. are you positive of which kindle device you have? if you are positive that it is indeed a KFHD 8.9, do you know which version it was on before you started the OP?
Mike
Click to expand...
Click to collapse
Thanks a lot friends, i surely have a jem and i tried to read ad do things intended to do for jem only (seems strange to me that link i posted is for otter though i cross checked many times not to flash other device images but may be messed up in enthusiasm)
Never mind i eventually had to end up selling this on craiglist as a friend mentioned and got a working one from ebay ( to my shock it's reported as lost and stolen) looks i have great bad luck...
Now the kindle is just nothing unless i have cm in it but i will need all you guys help so that i dont end up like before
So please help me out with links so that i do all things correctly ...please i don't have any money now to loose or fix this ...
Thanks in advance
Edit : i tried to root kindle but was not able to, its on the highest or most up to date version of fire os as per amazon
I tried to root with restore by binary, cant see superuser in app drawer, able to see it in system/apps via root explorer
Tried to install firefire.apk it shows no root & root explorer doesn't rename system apps to .bak.... So i believe i cant root..
Please @11fan help me out now i need only cm on kindle thats fine for me.......
I'd be gratful to you for the help
Let me see if I got this correct, you sold the bricked kindle with the incorrect images on it on craislist? You Bought another kindle off eBay that has been reported stolen/lost? That sounds like some of my luck! So you got another kfhd 8.9? And you are for sure!? If so, go to about tablet in settings and see which version its currently running, also turn ON USB debugging and set it to allow 3rd party app installs in security settings, then get adb and fastboot working and we will go from there.
Mike
sent from my jem running CM11 using TapaTalk
11fan said:
Let me see if I got this correct, you sold the bricked kindle with the incorrect images on it on craislist? You Bought another kindle off eBay that has been reported stolen/lost? That sounds like some of my luck! So you got another kfhd 8.9? And you are for sure!? If so, go to about tablet in settings and see which version its currently running, also turn ON USB debugging and set it to allow 3rd party app installs in security settings, then get adb and fastboot working and we will go from there.
Mike
sent from my jem running CM11 using TapaTalk
Click to expand...
Click to collapse
Done all that mate and yes im sure its Kindle Fire HD 8.9 running os 8.5.1
Edit : After trying to root with binary tool and qemu tool (scripts) the device became extremely laggy
Mr.Dumb said:
Done all that mate and yes im sure its Kindle Fire HD 8.9 running os 8.5.1
Edit : After trying to root with binary tool and qemu tool (scripts) the device became extremely laggy
Click to expand...
Click to collapse
yes the lag is known issue after/when trying to root using some of the ways posted! if you can get through the lagg long enough to get an app on it i would recommend using an app called keyrootmaster you can get it here http://download.apks.org/?server=14&apkid=com.zhiqupk.root&ver=1.3.6 this is what i used and several other posters i know of, THE ONLY BAD THING IS the app is written in Indonesian language, BUT it works and after about 3 taps you got root! if you are going to CM or some other rom it shouldn't matter about the language anyway as all of that app will be gone and superuser is baked into CM anyway. see if you can get that app, get it rooted and let me know and i will try to help you get TWRP and CM installed. I hope this helps out some!
Mike
11fan said:
yes the lag is known issue after/when trying to root using some of the ways posted! if you can get through the lagg long enough to get an app on it i would recommend using an app called keyrootmaster you can get it here http://download.apks.org/?server=14&apkid=com.zhiqupk.root&ver=1.3.6 this is what i used and several other posters i know of, THE ONLY BAD THING IS the app is written in Indonesian language, BUT it works and after about 3 taps you got root! if you are going to CM or some other rom it shouldn't matter about the language anyway as all of that app will be gone and superuser is baked into CM anyway. see if you can get that app, get it rooted and let me know and i will try to help you get TWRP and CM installed. I hope this helps out some!
Mike
Click to expand...
Click to collapse
Yes please help me with TWRP / CWM. Please & I want to install CM on it now
Did you get it rooted?
Mike
11fan said:
Did you get it rooted?
Mike
Click to expand...
Click to collapse
Yes
Hello @11fan
Edit : got it rooted, TWRP installed, made a nandroid backuo & tried to flash CM (chkd MD5 as well) but CM boot screen stayed for so so long...so I rebooted the device to TWRP and did a full wipe as well as format data...now have no os installed, cant mount as usb storage to copy nandroid...kooks like i've messed again....
Praying to God that I have some way again to restore...
Edit 2 : sorted via adb sideload
Glad you got it....i was going to tell you that the LONG cm screen on first boot is normal! I just loaded cm12 on mine last night and first boot took about 8 minutes, maybe longer as I forgot to time it!
Mike
Hello,
I use a Fire Phone Unlocked GSM running on Fire OS 4.6.1 (latest), and I've been tweaking with many things in my Fire Phone, and when I was trying to bring the stock launcher back, I failed to, and I also noticed that the keyboard was gone and the only I thing I was able to do is Voice Input (which doesn't work ;P).
So, I have adb set up and everything - I just need to COMPLETELY REMOVE EVERYTHING in my phone than reinstall the OS.
I did find a link in http://forum.xda-developers.com/fire-phone/help/fire-phone-hang-to-booting-t3131037 where it did show a US link, is this for Unlocked GSM? And by the way, how would I remove everything in my phone first before using sideload?
Please help ASAP, I need this phone to work properly! (Don't want to make this a 200$ waste)
Yes, the *.bin files from Amazon work on all devices, netlocked or not doesn't matter. There are no provider specific versions, just the one from Amazon.
Remove everything? Sideloading the image will "wipe" the device automatically, it is 'squeaky' clean after that.
Just turn off the phone and boot into recovery mode. You can use my guide from the link you already found. Hope everything goes well, best of luck to you. ^^
Bingo Bronson said:
Yes, the *.bin files from Amazon work on all devices, netlocked or not doesn't matter. There are no provider specific versions, just the one from Amazon.
Remove everything? Sideloading the image will "wipe" the device automatically, it is 'squeaky' clean after that.
Just turn off the phone and boot into recovery mode. You can use my guide from the link you already found. Hope everything goes well, best of luck to you. ^^
Click to expand...
Click to collapse
Ok, thank you very much!
Hi, my stock fire TV 2 only boots as far as coloured Amazon logo then gets stuck. I have used the usb keyboard trick to get to recovery, 'Amazon system recovery <3e>'. There are no menu options available. Is there anything I can do ??
Any advice is much appreciated.
Have you tried this?
http://forum.xda-developers.com/fire-tv/development/firetv-2-unbrick-image-t3313349
Thanks, I will try the link tonight, when my usb cable arrives!
My only concern is that adb has not been enabled on the Fire TV so will this method still work?
scottyw said:
Thanks, I will try the link tonight, when my usb cable arrives!
My only concern is that adb has not been enabled on the Fire TV so will this method still work?
Click to expand...
Click to collapse
Should not have anything to do with it as this procedure is based on bootloader/preloader, it connects before box s/w is initialized however you may need to install the drivers. Take a look at Step 2 in this guide: http://www.aftvnews.com/how-to-root-the-amazon-fire-tv-2/
I hate when people type "help!". You sound like a yelping dog. Stop it!
soundahfekz said:
I hate when people type "help!". You sound like a yelping dog. Stop it!
Click to expand...
Click to collapse
if you have a problem then go seek help. the user was polite. you on the other hand aren't. as far as i can see, you've not added anything useful to this thread.
i will remind you the code of conduct expected by xda members. if you want a link I'll send it.
this is in q&a so please respect other users.
to th op: as mentioned above, install drivers and unplug power. plug in usb, start the script and power on. it will take around 2 hours or more but it'll work.
Many, many thanks to bula1ca and El_Nino9 for your prompt responses. I now have a working AFTV2 - I'm a happy man.
Thanks guys so much.
(Soundahfekz I have chosen to just ignored your comment)