Develop Bugs

[Q] Carrying dead T-mobile SII (T989) :(

Hi People,
I just murdered my T-Mobile SII (T989) :crying:
It was bright Saturday morning, was browsing through web, saw update on forums about official ICS update available for T-Mobile devices.
I have immediately and successfully updated my device to ICS, everything went well and was enjoyinh ICS. But, then the worm inside me yapped and from nowhere I started rooting the phone.
This is the moment it got killed and now I've dead device in my hand.
1. Buttons combo doesn't work.
2. Unable to get the device in download mode.
3. Phone is no longer getting detected on Laptop and throws (qhsusb_load / drivers not successfully installed.) error message.
4. Phone doesn't turn on at all.
I know it’s hard-bricked, but please tell me if there is any way to solve this?
Will JIG option work; if the device is hard-bricked?
I am based in India and sending phone for JTAG would be bit difficult, so kindly suggest if there is any way?
Nikhil

The jig is supposed to work in these type of situations.
Sent from my SAMSUNG-SGH-T989 using xda premium

I went through this and as far as I know the only way to fix is a jtag service. Or if you can jtag it yourself. I made a 301k USB jig and it doesn't work so jtag is the only option I know unless you warranty it.
Sent from my SGH-T989 using xda premium

You Murderer! I just reported you to the police
Sent from my Sony Tablet S using Tapatalk 2

OP, you had to of selected re-partion hard drive while flashing the custom recovery through Odin. If this is true there is no fix. Sorry. This destroys the boot partion and recovery nor download mode will work. Did you get a failed message through Odin?

Jamison904 said:
OP, you had to of selected re-partion hard drive while flashing the custom recovery through Odin. If this is true there is no fix. Sorry. This destroys the boot partion and recovery nor download mode will work. Did you get a failed message through Odin?
Click to expand...
Click to collapse
I could have sworn that rooting this phone was easier than rooting my att sgs 2. You must have done something wrong
Sent from my SAMSUNG-SGH-I777 using XDA

AMAZINGGGGGGG GRACEEEEEEEE HOW SWEEEETTTT THE SOUNDDDDDD
Sent from my SAMSUNG-SGH-T989 using XDA Premium App

lawalty said:
The jig is supposed to work in these type of situations.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
JIG will work in this situation?

send it to mobiletechvideos, they ship international.

Check out mobiletechvideos
Today, my friend, is great as I just got my previously hard bricked phone back from mobiletechvideos! They unbricked mine after I accidentally tried installing a different model gs2 rom to my phone (price is right fail music). If using the jig everyone recommended isn't working, definitely send it to them and they'll try to get your phone back to life!:laugh::good:

Good to here. I've heard a lot of good reviews for them. Glad your back up and running. NOW GET TO FLASHING!
Sent from my SGH-T989 using xda app-developers app

http://www.youtube.com/watch?v=Wn_iz8z2AGw
Sorry I had to!! Seriously though, good luck unbricking your phone I hope you get it fixed!

flashy flashy
Tnallen said:
Good to here. I've heard a lot of good reviews for them. Glad your back up and running. NOW GET TO FLASHING!
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I'm still a pretty big noob when it comes to flashing stuff! I'm on gingerbread right now and am a little scared to death to flash anything :S then again the main reason I bricked out was because I attempted to flash a rom that was for a different galaxy s2. I'm still researching on how to safetly flash different roms and which ones work the best

Can someone explain to me what JIG is?
Sent from my SGH-T989 using xda app-developers app

a93hunt said:
Can someone explain to me what JIG is?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
A jig is a USB chord that you take the chord off and attach certain resistors(usually total 301k) to the micro USB connector. Then when u plug it into a phone it should force it into download mode. It however does not work for this phone.
Sent from my SGH-T989 using xda premium

Anyone else having issue with apps2sd?

captain134 said:
A jig is a USB chord that you take the chord off and attach certain resistors(usually total 301k) to the micro USB connector. Then when u plug it into a phone it should force it into download mode. It however does not work for this phone.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I have a jig and it puts it into download mode every time got it for 5 bucks off ebay
Sent from my SAMSUNG-SGH-T989 using xda premium

USB dongle download mode is what he's talking about I think
Sent from my SGH-T989 using Tapatalk

Never heard of that mode what's that used for??
Sent from my SAMSUNG-SGH-T989 using xda premium

Hard bricked HELP..HELP..

I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium

Try a USB dongle.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

International rom?

Bizdady said:
International rom?
Click to expand...
Click to collapse
Yes, It was my nephew's s3. He was blindly flashed it, now He asked me to help him, and I am asking any one in here know how to get it power up and into download mode.

I think that flashing the wrong radio version could fry the whole thing dead permanently.
However, if you can get ADB to recognize the device you may be able to get it working. See if you can get adb to recognize the device at all, if you can there may be hope.

lgkahn said:
Try a USB dongle.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
and how do you fix it with that?

Sorry many that have flashed international have been hard bricked if they can't return on. Mskip has a toolkit but if it won't turn on then it's hard to flash though.
Sent from my Samsung Galaxy SIII using Tapatalk

Does any screen come up? If it's hard bricked, just bring it to the store, and show them. They'll probably try a new battery, and if they can't boot it up, then they may replace it.
Worst case, they say they won't replace it cause you messed with it, and you're back where you started.

NedDasty said:
Does any screen come up? If it's hard bricked, just bring it to the store, and show them. They'll probably try a new battery, and if they can't boot it up, then they may replace it.
Worst case, they say they won't replace it cause you messed with it, and you're back where you started.
Click to expand...
Click to collapse
No ..nothing come up. screen is blank

jordan032503 said:
and how do you fix it with that?
Click to expand...
Click to collapse
Cause the USB dongle will put you straight to download mode. From there you can flash the proper ROM.
Anyway, if you can't get in to download mode, can't boot up to anything, and especially if ADB can't find your phone, then you might have just gotten yourself a very expensive paperweight.
Sent from my SGH-I747M using xda app-developers app

jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
The same thing happened to me a year ago, I flashed the wrong Kernel to my T-Mobile Galaxy 4G, you need a (JTAG Service). Go to this website and contact the guy he will help you get it working again, good luck.
http://mobiletechvideos.mybigcommerce.com/

youre brickd
The jig won't work for u. I bet if you plug it in the computer it sees it as QHSUSB DLOAD. sound right? Sounds like u need JTAG or to return it. You just woke up and it didn't turn on right? Lmao

jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I did the same thing, quit wasting time, you need a Jtag service period, if you can't get into download mode, Odin and Adb IS NOT going to work. It will not see the device. Go into device manager, if you see this QHSUSB DLOAD, you are seriously bricked, only Jtag can help it. The usbjig will NOT work with this issue, I have tried.
---------- Post added at 07:32 AM ---------- Previous post was at 07:25 AM ----------
billard412 said:
The jig won't work for u. I bet if you plug it in the computer it sees it as QHSUSB DLOAD. sound right? Sounds like u need JTAG or to return it. You just woke up and it didn't turn on right? Lmao
Click to expand...
Click to collapse
This is the correct answer, Jtag or return are the only options.

jordan032503 said:
I flashed a wrong Rom on my T-Mobile S3. Now I can not get it into download mode. It none responsive I cannot get it to power on. I try pull out the battery put in back in. Didn't work either. Any one have any idea how I get my s3 power up into download mode??
Thanks
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999 using xda premium

deeznutz1977 said:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This is exactly where I sent my phone repair, quick and informative.

just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app

oscarwylde said:
just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Lol.

oscarwylde said:
just and fyi, I fried my old g2 with the wrong Rom within the first week I had it. but insurance covers your phone when it gets destroyed in a car accident.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
lol, not in Texas they won't.

BRICK
My T999 is the same the computer is not recognized with error message QHSUSB DLOAD. but i dont know why after i install SAMSUNG ADB INTERFACE then the computer start see it in Device Manager and name my device as SAMSUNG ADROID PHONE . but ODIN not reconized , can't get into download mode, Odin and Adb IS NOT going to work , the usbjig is NOT work . The USB on PC make sound when i plug in but the phone still not on . I think i get hard brick and may have to send it to TEXAS . any help , please

I bricked mine last week. I then lost it too...insurance sent me a new one.

[Q] Hard Bricked Tmobile Galaxy S3?

Yes, I too hard bricked my t999 but funny thing is I've didn't flash any roms. Here's what happened, I was already on Wicked V5 rom, I went to the galaxys3root.com and downloaded MIUI for Tmobile gs3. When I tried to restart my phone to recovery mode the phone just turned off and never turn on again. Someone please help me. I don't really have time to send my phone to Texas, does anyone know any other ways to fix this? Is there service around NJ or Philly area?

Have you done all the usual? Pull battery wait a few put it back in and try to get into recovery or download mode?
Sent from my SGH-T999 using xda premium

Reply
funziebear said:
Have you done all the usual? Pull battery wait a few put it back in and try to get into recovery or download mode?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes, no luck..

Arent u able to get into download mode? Seems like you havent flash another s 3 rom so you should be able to get into download mode.
I had dome several stupid thing on phone and thought it bricked but I was able to get working.
Sent from my SGH-T999 using xda premium

Reply
bikrame said:
Arent u able to get into download mode? Seems like you havent flash another s 3 rom so you should be able to get into download mode.
I had dome several stupid thing on phone and thought it bricked but I was able to get working.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes, I didn't flash any roms, at least any wrong ones, I've only downloaded the miui for tmobile version but phone turned off when I tried to reboot into recovery, I've tried to boot into download by taking out battery and pressing volume down+home+power and plugging battery but nothing happens..

lampardd said:
Yes, I didn't flash any roms, at least any wrong ones, I've only downloaded the miui for tmobile version but phone turned off when I tried to reboot into recovery, I've tried to boot into download by taking out battery and pressing volume down+home+power and plugging battery but nothing happens..
Click to expand...
Click to collapse
Have you tried recovery?
Sent from my SGH-T999 using xda app-developers app

Reply
chrisram88 said:
Have you tried recovery?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Yes I've, all I'm getting is qhsusb_dload error in my device manager when I plug the phone to my pc.

Send it for JTAG repair or use a jig. Your phone might not be bricked, but there is something wrong with it.
Sent from my SGH-T989 using xda premium

Is it plugged in when you try to power on? Try it both unplugged and plugged if you havent already.
Also try holding power for about 10-20 seconds.
Sent from my SGH-T999 using xda app-developers app

Does it vibrate
Sent from my SGH-T999 using xda app-developers app

Reply
DocHoliday77 said:
Is it plugged in when you try to power on? Try it both unplugged and plugged if you havent already.
Also try holding power for about 10-20 seconds.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I've tried everything, the phone doesn't vibrate either.

lampardd said:
Yes I've, all I'm getting is qhsusb_dload error in my device manager when I plug the phone to my pc.
Click to expand...
Click to collapse
Yup that's a brick... Search qhsusb and see all the threads related. They are all bricks. Nothing you can do but jtag. Jig won't fix it.
Sent from my SGH-T999 using xda app-developers app

Reply
chrisram88 said:
Yup that's a brick... Search qhsusb and see all the threads related. They are all bricks. Nothing you can do but jtag. Jig won't fix it.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Okay, but is Texas the only place to get the phone fixed, no one else in US knows how to do this jtag thing besides mobiletech who's 2000 miles away from me?

lampardd said:
Okay, but is Texas the only place to get the phone fixed, no one else in US knows how to do this jtag thing besides mobiletech who's 2000 miles away from me?
Click to expand...
Click to collapse
Best and only place I know.
Sent from my SGH-T999 using xda app-developers app

lampardd said:
Yes, I too hard bricked my t999 but funny thing is I've didn't flash any roms. Here's what happened, I was already on Wicked V5 rom, I went to the galaxys3root.com and downloaded MIUI for Tmobile gs3. When I tried to restart my phone to recovery mode the phone just turned off and never turn on again. Someone please help me. I don't really have time to send my phone to Texas, does anyone know any other ways to fix this? Is there service around NJ or Philly area?
Click to expand...
Click to collapse
Same issue here! Any help?

rekamyenom said:
Same issue here! Any help?
Click to expand...
Click to collapse
so it seems that the common issue here is that u both downloaded MIUI from the same wepage... I would think a malicious download... and in all Honesty I had bad experiences the guy's tut.... (with the guy running the site) I dunno I dont want to point finger or nothing but 2 people with same problem?? I suspect treachery afoot... lol
scratch that... I scanned MIUI Zip file and it contained no threats... so I'm guessing a hardware mulfuction?? or simply u got a bad phone.

Try Samsung warranty since you can't get into download mode they shouldn't know it's rooted. I wouldn't say this is a user error since you didn't even flash a rom
Sent from my SGH-T999 using xda premium

md1008 said:
Try Samsung warranty since you can't get into download mode they shouldn't know it's rooted. I wouldn't say this is a user error since you didn't even flash a rom
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
And you think Samsung won't have a way to enter download mode and see the counter? it's there hardware they know it better than we do.
Sent From My Galaxy S3 Boricua 100%

I gaved up on trying to fix it myself. Send your phone to mobile tech videos, guy did a great job. However I found another person on eBay the other day with high ratings who also does the jtag for only $30. (mobiletech was 60). Good luck
Sent from my SGH-T999 using xda app-developers app

razielpr said:
And you think Samsung won't have a way to enter download mode and see the counter? it's there hardware they know it better than we do.
Sent From My Galaxy S3 Boricua 100%
Click to expand...
Click to collapse
Dont you have regular tmobile warranty? the phone wont power on, no water damage, sounds like a clear cut case of getting your phone swapped out for you.

[Q] Will any Samsung USB jig work on this phone?

Hey all, I already own a USB jig that I've used many times on a SGS2:
http://www.ebay.co.uk/itm/UNBrick-Samsung-Galaxy-S2-i9100-Download-Mode-USB-Jig-/380346403620
Will this also work on the Note 2?

Your phone has been bricked already?
Sent from my GT-N7100 using xda premium

I would think so. My jig works on the GN2.

Just wondering if the USB Jig can reset the binary counter on the Note2?

EarlZ said:
Just wondering if the USB Jig can reset the binary counter on the Note2?
Click to expand...
Click to collapse
Im very interested in that, too. I was not able to find something online about resetting Flash counter
of the n7100 with a Jig.
Perhaps someone has the Answer?

Pretty sure that trick doesn't work anymore guys, think Samsung did something with the bootloader.
Sent from my GT-N7100 using xda premium

Then what works?
madpete said:
Pretty sure that trick doesn't work anymore guys, think Samsung did something with the bootloader.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
If that won't work anymore, what will?

[Q] Samsung Galaxy SII (SGH-T989): flashed wrong kernel, no sign of boot

I accidentally flashed a siyah kernel (v 4.0.1) intended for the Internation Galaxy SII (i9100) onto my T-Mobile Galaxy SII (SGH-T989). For some reason i overlooked "FOR i9100" and now that i've flashed it there is no sign of life.
It was rooted with the AOKP Milestone Build 6 ROM flashed and working perfectly until i flashed the kernel
No vibration when holding the Power Button, Power&Vol+&Vol-, connecting a USB Jig, a USB wall charger, nor a regular USB. It isn't recognized in ODIN nor Kies when I try these different combinations of buttons and connections.
I have it connected to the USB wall charger and letting it sit for a while, still just a black screen.
Does anyone have a solution to this predicament?

Pretty sure its a hard brick
Sent from my SGH-T989 using xda app-developers app

abhi08638 said:
Pretty sure its a hard brick
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yes I've figured that out but what does that entail? Is it irreversible?

alvarozavala1111995 said:
Yes I've figured that out but what does that entail? Is it irreversible?
Click to expand...
Click to collapse
Search the forum for jtag.
Sent from my SGH-T989 using xda app-developers app

blackangst said:
Search the forum for jtag.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I have but I see it costs around $50 to repair it that way, and T-Mobile charges me $25 to replace the entire phone. I want to do anything possible to fix the phone i have now with my own hands and if it turns out I can't then I'll just send it to T-Mobile. :/