Related
Issue 1: Multitouch issue
- As far as I'm aware of, there is no fix yet and a lot of people are experiencing the issue. What happens is whilst in landscape mode, sometimes, if one finger is placed at the bottom left of the screen, and another is placed on the bottom right, it'll fail to recognize the second touch (bottom right). This doesn't always occur, but does happen at times.
Simple fix: Lock the screen, then unlock it
Issue 2: Wifi consistently dropping
While downloading files, or sometimes even watching youtube videos, the wifi icon will disappear for a split second, then come back and an error will appear along the lines of " File could not be downloaded due to an error" or in the case of the market, it'll just stop downloading and give an error.
Fix: Sadly, the only fix that I have found so far for this issue is to get a new router. See my post here I used a Linksys WRT300N
EDIT: Another potential fix is to change some settings with the router but I'm not sure exactly what settings are needed to be changed.
EDIT2: I've created an issue about the wifi issue over here and according to [email protected]:
Im assuming you are downloading huge files using WiFi... there is a notorious bug still unresolved on DHCP leasing time. If your route is settled to infinite (0 or ffffffff) a local timeout of few minutes is applied, thus the download broke and resume time by time because dhcp renewal. To fix this try to adjust your route settings indicating a discrete leasing time (i.e. 24 hours or 2 days) and thi should fix this specific issue (also noticeble when watching youtube videos, that may freeze after few minutes).
Hope this helps.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Hey everyone,
I have had my Galaxy Nexus from Bell for a few days now, and it is a beast Everything runs smoothly, no lag (even with live wallpaper) and helps me accomplish everything I need from a mobile device ( a hell of a lot better than the milestone - international version of the Droid)
However, there are some prominent issues throughout the device.
1.) The wifi constantly times out, it will stop working at random times even if im 1-2 ft away from the router. Also, when I was downloading SD files for a game (asphalt 6 - 524mb file i think), i had to restart the download at least 10-15 times to finally get it to download. Is this a hardware issue? Can this be fixed through a software update
2.) The multitouch doesn't work at random times. For me, whether its plugged into the charger or not, at random times, when you touch the left side of the device in landscape mode, the device will not recognize touch inputs on the right side. HOWEVER, if you lock the screen, then unlock it, it works flawlessly. I am determined this is a software bug (may not be though) and if it isn't could someone please tell me? Thanks. And a lot of people also have this issue : http://forum.xda-developers.com/showthread.php?t=1385587
Also shown here:
www.youtube.com/watch?v=YdRSRROffO4
I have two question for you awesome people at XDA.
1.) Could someone please either post an issue to Google regarding these two issues or direct me to a website where I can post them?
2.) Could any of these be a hardware issue? Do you think I should return it and get another one?
Thanks so much guys,
Mosh
Would also like to know if the second problem is software related or not :/
EDIT: noticed now that my screen gets really hot at the top. Really hot! Does your get warm aswell?
Don't know. The easy fix is to swap it.
Sent from my Galaxy Nexus using xda premium
Both my touchscreen and WiFi have been working flawlessly.
I did have some initial hiccups with the WiFi until I power cycled my router.
Sent from my Galaxy Nexus using xda premium
Make sure 'Avoid poor connections" is ticked off in the advanced WiFi settings.
sgs064 said:
Make sure 'Avoid poor connections" is ticked off in the advanced WiFi settings.
Click to expand...
Click to collapse
I've been having WiFi trouble with the Nexus too - the phone generally seems to get poorer signal in comparison to my other devices. I've unticked this box, but it still keeps avoiding connecting (and when I go to WiFi settings, actually says it's avoiding connecting to my network because the connection is poor). It's frustrating, to say the least.
Rather than immediately assume that you should swap the phone, or thinking it's hardware, or (?).
What build do you have? There are at least 3 builds available for the SGN.
http://forum.xda-developers.com/showthread.php?t=1376856
Sounds like another on the way...
sephtin said:
Rather than immediately assume that you should swap the phone, or thinking it's hardware, or (?).
What build do you have? There are at least 3 builds available for the SGN.
http://forum.xda-developers.com/showthread.php?t=1376856
Sounds like another on the way...
Click to expand...
Click to collapse
Seriously people need to stop making such a big deal of these separate builds.
WiFi could be an issue with the router. I had a problem where connecting Nexus to the router would cause both mine and other users internet in the network fail. Once I disconnected, internet returned. It worked on first few loads, then not anymore. Strange thing is that it fixed itself few weeks later.
(Same happened once with another router and when I was using HTC Desire, Android seems to be a wacky WiFi partner)
@rbiter said:
Don't know. The easy fix is to swap it.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Not this. If its software you end up with another phone with the same problem.
You may find other radios help with wifi, check the dev section for details if you have a rooted device. Otherwise youll probably need to wait for one of them to drop via an official ota.
As others have said, uncheck the weak wifi option
In terms of the multitouch issue, just tested my device and can't see any issues at all. Could be software related as the screen itself can support 10inputs - be interesting for users on non standard roms to check and see if they do have a problem as this may lend some weight towards the software related argument.
mohitrocks said:
Hey everyone,
I have had my Galaxy Nexus from Bell for a few days now, and it is a beast Everything runs smoothly, no lag (even with live wallpaper) and helps me accomplish everything I need from a mobile device ( a hell of a lot better than the milestone - international version of the Droid)
However, there are some prominent issues throughout the device.
1.) The wifi constantly times out, it will stop working at random times even if im 1-2 ft away from the router. Also, when I was downloading SD files for a game (asphalt 6 - 524mb file i think), i had to restart the download at least 10-15 times to finally get it to download. Is this a hardware issue? Can this be fixed through a software update
2.) The multitouch doesn't work at random times. For me, whether its plugged into the charger or not, at random times, when you touch the left side of the device in landscape mode, the device will not recognize touch inputs on the right side. HOWEVER, if you lock the screen, then unlock it, it works flawlessly. I am determined this is a software bug (may not be though) and if it isn't could someone please tell me? Thanks. And a lot of people also have this issue : http://forum.xda-developers.com/showthread.php?t=1385587
Also shown here:
www.youtube.com/watch?v=YdRSRROffO4
I have two question for you awesome people at XDA.
1.) Could someone please either post an issue to Google regarding these two issues or direct me to a website where I can post them?
2.) Could any of these be a hardware issue? Do you think I should return it and get another one?
Thanks so much guys,
Mosh
Click to expand...
Click to collapse
I get #2 in shadow gun if it goes into sleep mode while i'm playing. Its clearly a software issue as restarting the game it goes away.
Point 1 happens to me too. I've tried multiple ROM's. I'm getting a bit worried that it's hardware. It's dropping every few mins when I need it... then it comes back rather quick.
You have any news or has anyone else experienced it?
I'm not seeing a ton of people talk about this wifi problem, so I'm guessing it's not a widespread issue. I'm assuming it's not hardware either, but I'm curious about it. Whenever I turn on wifi on the Nexus and it tries to connect to my router, it disables all other connections, and the Nexus reports that it's not in range of the router. I'm interested in what routers people are using that are experiencing this issue.
I have a D-Link DI-624, a free router provided by Verizon with FIOS signup. I'm using a custom password, not the one that came with the device. I have a 13 digit alphanumeric password (sorry, I can't remember the exact security setting for it).
Edit: Actually been doing some research on this, and it's appearing it may be a frequency / channel issue, that the phone is broadcasting at a frequency similar to your router. Looking into exact fixes at the moment.
I have no problem with wifi and multi touch.
But I noticed that two fingers cannot be very closely touched it will mingle together. For example if you hold shift button on keyboard it could act like normal shift (turn lowercase to upper or vice versa) but its very difficult to use shift + a
Also lots of games exiting on me, first I thought was multi touch acting up so I could accidentally hit home or back button. But then I think its just matter or compatibility of those games with ICS.
Sent from my Galaxy Nexus using XDA App
do you know if the latest update solved the touch problem?
Same issues here. On the samung version (dont remember the codename) i had this issue so i rooted and changed it so that google updates my phone. But this didn't help either. Still losing wifi when i am downloading. Like now i was going to download 9mm and after 2 seconds the wifi disconnect until i quit 9mm and then it pops up straight away. Can it be a hardware issue?
PS: before i change my phone brand to google, i could see the "avoid poor wifi connection" but now when i go to advanced tab it's gone :S
Ok everytime i try to test wifi in speedtest it says network communication issues after 2 sec of testing. Any info please? Do i have a faulty unit? going crazy over here
For what it's worth, I haven't had either of these problems on my Galaxy Nexus, and it's been on a lot of WiFi networks.
I've gotten speeds in excess of 20mbit/20mbit via the speedtest.net app multiple times on the campus wifi, as well as my parents', and my dorm connections. I've downloaded the Asphalt files twice without any interruptions either time, and I've never experienced any problems.
As for multitouch - no problems with that either. To type in all caps you can hold down the caps button on the keyboard and type - it's never given me any issues. I don't think I've been in a situation where I've felt multitouch hasn't performed right.
horadee said:
Point 1 happens to me too. I've tried multiple ROM's. I'm getting a bit worried that it's hardware. It's dropping every few mins when I need it... then it comes back rather quick.
You have any news or has anyone else experienced it?
Click to expand...
Click to collapse
Multiple ROMs doesn't mean much, they all share official driver binaries and radios that are available.
Sent from my Galaxy Nexus using Tapatalk
Manacit said:
For what it's worth, I haven't had either of these problems on my Galaxy Nexus, and it's been on a lot of WiFi networks.
I've gotten speeds in excess of 20mbit/20mbit via the speedtest.net app multiple times on the campus wifi, as well as my parents', and my dorm connections. I've downloaded the Asphalt files twice without any interruptions either time, and I've never experienced any problems.
As for multitouch - no problems with that either. To type in all caps you can hold down the caps button on the keyboard and type - it's never given me any issues. I don't think I've been in a situation where I've felt multitouch hasn't performed right.
Click to expand...
Click to collapse
Then i probably got a faulty unit. Will give it 2 more days and if it's still the same i'll return it.
Really odd problem here - as of a couple days ago, everything was working perfectly with my galaxy nexus. I decided to jump over to CM10 (was on codename android, IIRC), right after I think there were some new commits to AOSP.
From here on out, my phone would never enter deep sleep when connected to wifi. Any wifi hotspot - the ones I've been using, a hotspot I created from my desktop - the icon would show the phone constant receiving data via wifi. Using better battery stats, over about 5 hours on my desk, 4.5hrs were spent with a WLAN_RX_WAKE kernel wakelock with my phone sitting at 350MHz instead of deep sleep for that time.
I tried a bunch of different kernels (stock CM10, franco, imoseyon, etc) both new and old versions, but the problem was still there. I tried clean flashing a rom, and only installing better battery stats. Same thing with all kernels.
Factory restored google stock images to BOTH ICS and JB. I still have the problem. Tried disabling google location services. No dice. Tried a couple basebands, but I'm pretty sure that only affects cell/data performance, right?
I honestly have no idea what is going on. I've been on this hotspot (campus wifi) for months now without a problem, and now this. Some threads say that this is caused by DHCP requests from the router, but why would I have not seen this until now? My idle drain was at about 1-2% per hour before this, now it is close to 10-15%.
shadvich said:
Really odd problem here - as of a couple days ago, everything was working perfectly with my galaxy nexus. I decided to jump over to CM10 (was on codename android, IIRC), right after I think there were some new commits to AOSP.
From here on out, my phone would never enter deep sleep when connected to wifi. Any wifi hotspot - the ones I've been using, a hotspot I created from my desktop - the icon would show the phone constant receiving data via wifi. Using better battery stats, over about 5 hours on my desk, 4.5hrs were spent with a WLAN_RX_WAKE kernel wakelock with my phone sitting at 350MHz instead of deep sleep for that time.
I tried a bunch of different kernels (stock CM10, franco, imoseyon, etc) both new and old versions, but the problem was still there. I tried clean flashing a rom, and only installing better battery stats. Same thing with all kernels.
Factory restored google stock images to BOTH ICS and JB. I still have the problem. Tried disabling google location services. No dice. Tried a couple basebands, but I'm pretty sure that only affects cell/data performance, right?
I honestly have no idea what is going on. I've been on this hotspot (campus wifi) for months now without a problem, and now this. Some threads say that this is caused by DHCP requests from the router, but why would I have not seen this until now? My idle drain was at about 1-2% per hour before this, now it is close to 10-15%.
Click to expand...
Click to collapse
This is literally the EXACT SAME problem I'm having...I wish someone could properly explain why this is happening and how to fix it.
Sent from my Galaxy Nexus using xda app-developers app
Not sure if you've tried this and it helps but maybe you can try Network Log or Shark from the store to diagnose this?
Network Log doesn't show up with anything, so the wakelock shouldn't be caused by a rogue app.
Shark, on the other hand, after about 10 seconds of logging, netted me about 300 DHCPv6 'solicit XID' requests. There a bunch of different sources from these requests, they just seem to be other devices on the network pinging my phone to see if it's a DHCPv6 server...?
I've seen some suggestions on other forums to mess around with the router settings, which I can't do because it's campus internet.
Since you've tinkered with rom/kernels etc on phone without any seeming change, it's feasible that there's been some change recently on the other side of the equation namely the network settings of your campus wifi? Maybe your University's tech department has implemented something new etc? Have you tried asking others with wifi enabled phones if they are experiencing this as well?
Found this here (pretty sure you've come across this if you've been googling abt this issue but posting anyways)
"Another more elaborate solution if you rely on that network a lot, is to purchase a wireless bridge or gaming adapter and connect it to your apartment wifi and then connect your own wifi router to that. Then the gaming adapter would get the dhcp IP from your apartment (so who cares if it is renewing it constantly) and your router would treat the connection just as if you were connected directly to an internet connection. Then configure your router for static IP addresses or if your router does not cause issues with DHCP then you don't need static IPs."
from http://rootzwiki.com/topic/16134-kernel-wakelock-wlan-rx-wake/
I know I had an issue with some wlan rx wakelock thing last year but I cannot for the life of me remember how I got rid of it or what changed
Hmm, seems like an okay solution but my friend's devices don't seem to show the same symptom, and since I roam campus alot, a wifi extender wouldn't be ideal.
Bump. Any other ideas?
Sent from my Galaxy Nexus using xda app-developers app
I am seriously ripping my hair out from this goddamn wakelock ****.
I wake up at 9am and have to charge my phone by 4pm because it's at 16% with 40 minutes of screen on time. Seriously? This is a JOKE.
I've checked with BetterBatteryStats and CPU Spy. Both confirm the phone keeps sitting at 350MHz when it's supposed to be sleeping, as well as wlan_rx_wake keeping the phone awake.
I've set my phone to receive a static IP from my router (DIR-655) but it doesn't help. I really don't know WHAT to do. I've downloaded shark to my phone, sniffed packets, but haven't been able to get anything useful out of it since there is a LOT to sift through (unless you know what you're looking for - which I don't).
This is by far the worst bug/issue I have ever encountered with my phone and it is seriously getting on my nerves. I will be forever greatful to anyone who can help me pinpoint the issue and make it stop.
Also, i REFUSE to "go buy a new router" as it's bull****. This is a bug people experience only sometimes it seems and NO ONE has a fix for it. I read somewhere about a fix being implemented in some kernels but they were for other phones, never found anything like it for the GNex. If anyone knows anything about a fix like that, please show me the way.
I already checked for rogue apps, there were none keeping wifi awake. I've even tried with a totally stock, newly flashed phone with stock kernel and everything. NO extra apps installed except shark, CPU spy and betterbatterystats sideloaded. I didn't even input my GMail to stop the syncing. It STILL KEPT MY GODDAMN PHONE AWAKE.
I am SERIOUSLY desperate. Considering just selling my phone and opting for something else if this continues, it totally cripples everything.
/rant over
turn on WiFi, Bluetooth, and GPS, for about 30seconds, then turn them off. put your phone to sleep, then check if you're going into deep sleep. CPU spy is a good app to check if your hitting deep sleep.
Change wireless network encryption? Wpa2, tkip+aes, aes only, tkip only? Wpa?
Change wifi channel?
Edit: scratch that. Try disabling 5ghz band.
Sent from my i9250
I had a similar issue, it turned out it was Dropbox LANSync in my home LAN. I used an experimental forum build on my PC, so it could be this, but in the end I turned LANSync off, since Android doesn't make use of it anyway.
So try this if you have Dropbox running on your network clients.
simms22 said:
turn on WiFi, Bluetooth, and GPS, for about 30seconds, then turn them off. put your phone to sleep, then check if you're going into deep sleep. CPU spy is a good app to check if your hitting deep sleep.
Click to expand...
Click to collapse
At the moment I am fiddling with putting my router into different security configurations, per the quote below. But I will give your idea a try as well.
bk201doesntexist said:
Change wireless network encryption? Wpa2, tkip+aes, aes only, tkip only? Wpa?
Change wifi channel?
Edit: scratch that. Try disabling 5ghz band.
Sent from my i9250
Click to expand...
Click to collapse
5GHz band? Where do I disable this, the phone or the router? My router chooses channel automatically and is set to Auto 20MHz/40MHz channel width.
madd0g said:
I had a similar issue, it turned out it was Dropbox LANSync in my home LAN. I used an experimental forum build on my PC, so it could be this, but in the end I turned LANSync off, since Android doesn't make use of it anyway.
So try this if you have Dropbox running on your network clients.
Click to expand...
Click to collapse
I don't have DropBox on my phone or on any of my PC's
A quick update, I just tried all the suggestions in the quotes in my previous post but to no avail, still getting the wake locks. I'm seriously going crazy.
Turning wifi off did let the phone sleep, but that was expected as the wake lock is related to wifi. Nothing else has worked. NOTHING.
Sent from my Galaxy Nexus using xda app-developers app
EddieN said:
A quick update, I just tried all the suggestions in the quotes in my previous post but to no avail, still getting the wake locks. I'm seriously going crazy.
Turning wifi off did let the phone sleep, but that was expected as the wake lock is related to wifi. Nothing else has worked. NOTHING.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
This issue appeared again for me, it obviously also helps to disable the NETBIOS on your Windows PC network adapter. There are guides for that online. Also get the "Network Log" app in the Play Store, it shows the traffic so you can see which one's are for the kernel (wlan_rx_wake is a kernel wakelock).
Also uPNP feature in router can cause all kind of weird behavior. Better block it from router's firewall.
Sent from my slimbeaned GNex
What baffles me the most is that all of this shouldn't be needed. I shouldn't have to disable netbios and do things to OTHER devices just so my phone sleeps. This is a jellybean issue imo, I never had these problems on ICS.
The experiments continue, updates incoming.
Sent from my Galaxy Nexus using xda app-developers app
I also suspect the major issue was that my wifi channel was the same as the ones around me. When I changed it, the wlan wakelocks went down significantly.
Sent from my Galaxy Nexus using Tapatalk 2
EddieN said:
At the moment I am fiddling with putting my router into different security configurations, per the quote below. But I will give your idea a try as well.
5GHz band? Where do I disable this, the phone or the router? My router chooses channel automatically and is set to Auto 20MHz/40MHz channel width.
I don't have DropBox on my phone or on any of my PC's
Click to expand...
Click to collapse
5 Ghz band is disabled when you enter Wi - Fi - advanced - Wi - Fi frequency band ... It's set to auto by default, you try either 2.4 or 5 ghz on manual and check if that helps ( incase you didnt already )
Does anyone have any news about this issue? I have the same problem and I can't find the solution. I made several test without any good results.
lkeops said:
Does anyone have any news about this issue? I have the same problem and I can't find the solution. I made several test without any good results.
Click to expand...
Click to collapse
Change the Wifi channel.
Sent from my Galaxy Nexus using Tapatalk 2
I've seen a few similar threads to the one I'm about to make. I've tried different suggestions which I will post here. Yet, none of them seems to work and I'm curious to see if anyone of you has a fix for my problem. My phone is an unbranded international HOX using the 9.7.2 ARHD rom by Mike1986. Here we go:
Problem
While being on WIFI my push notifications aren't coming through in time. There's a delay from anywhere between a few minutes up to as much as 40+ minutes. The phone doesn't have this issue being on the mobile data network. I'm also not 100% sure if the delay is still there when I'm on an different router. Even when I turn on the screen again, the messages seem to come in randomly.
Settings
WIFI best performance enabled
Static IP by router
WIFI sleep policy: Wifi always on
Tried suggestions
Wakelock: One thread described using an app called REGPON keep-alive, which installs a wakelock onto the phone to keep the data connection alive. This app did not do the trick. It only drained my battery and the messages still didn't come through.
Wifi performance: Set the phone to maximum wifi performance. This seemed to work for a while but ended up not working proper either
Kernel: Try a different kernel was one suggestion. I've switched from Stock to Faux123 010 kernel. This didn't change anything about the WIFI problem.
Static IP + Portforwarding + Disabling router Firewall: I've tried both port forwarding on port 5228 and even the range 5224-5228. I've also tried setting up triggered ranges. Maybe I'm doing something wrong on this part though. The router firewall is disabled and it should no longer block anonymous WAN packages.
Disable SmartSync: With the Suite Tools that are included in Mike1986's rom I've disabled Smartsync. No results as far as the wifi problem goes.
Probing app: I've tried an app that supposedly probes my router at least every minute in order to keep the connection alive.
Switching between b/g/n network: Didn't make a difference. The signal quality of the router is also good.
The only thing that did work for extended periods of time was using this remote control app that allows me to type through my PC keyboard, where the text ended up on the phone. I've also got an app installed to test push notifications. It's capable of making a log. Maybe that'll give you guys more information.
Right now I'm not sure if it's an issue with the HOX or if my router somehow stops the traffic. I don't recall having this problem on my HTC Desire. Does anyone have anymore tips?
Thanks,
Zendio
No problem with Gmail push notification on Stock 2.17.401.2.
Yesterday I still was on ARHD 9.7.2, also there I never noticed any delay.
Edit: this complies to various wifi networks (@home, @office, @parents etc.)
Zendio said:
I've seen a few similar threads to the one I'm about to make. I've tried different suggestions which I will post here. Yet, none of them seems to work and I'm curious to see if anyone of you has a fix for my problem. My phone is an unbranded international HOX using the 9.7.2 ARHD rom by Mike1986. Here we go:
Problem
While being on WIFI my push notifications aren't coming through in time. There's a delay from anywhere between a few minutes up to as much as 40+ minutes. The phone doesn't have this issue being on the mobile data network. I'm also not 100% sure if the delay is still there when I'm on an different router. Even when I turn on the screen again, the messages seem to come in randomly.
Settings
WIFI best performance enabled
Static IP by router
WIFI sleep policy: Wifi always on
Tried suggestions
Wakelock: One thread described using an app called REGPON keep-alive, which installs a wakelock onto the phone to keep the data connection alive. This app did not do the trick. It only drained my battery and the messages still didn't come through.
Wifi performance: Set the phone to maximum wifi performance. This seemed to work for a while but ended up not working proper either
Kernel: Try a different kernel was one suggestion. I've switched from Stock to Faux123 010 kernel. This didn't change anything about the WIFI problem.
Static IP + Portforwarding + Disabling router Firewall: I've tried both port forwarding on port 5228 and even the range 5224-5228. I've also tried setting up triggered ranges. Maybe I'm doing something wrong on this part though. The router firewall is disabled and it should no longer block anonymous WAN packages.
Disable SmartSync: With the Suite Tools that are included in Mike1986's rom I've disabled Smartsync. No results as far as the wifi problem goes.
Probing app: I've tried an app that supposedly probes my router at least every minute in order to keep the connection alive.
Switching between b/g/n network: Didn't make a difference. The signal quality of the router is also good.
The only thing that did work for extended periods of time was using this remote control app that allows me to type through my PC keyboard, where the text ended up on the phone. I've also got an app installed to test push notifications. It's capable of making a log. Maybe that'll give you guys more information.
Right now I'm not sure if it's an issue with the HOX or if my router somehow stops the traffic. I don't recall having this problem on my HTC Desire. Does anyone have anymore tips?
Thanks,
Zendio
Click to expand...
Click to collapse
I am so sorry to hear you are affected by this problem, but also happy someone else is experiencing the exact same thing as I am !!!
I have tried different solutions to no avail.
Would love to hear something on this topic !!
Also I should note, I don't have any kind of task killer installed.
In general use WIFI feels really fluid and responsive. I really have no idea what could cause these problems.
Zendio said:
Also I should note, I don't have any kind of task killer installed.
In general use WIFI feels really fluid and responsive. I really have no idea what could cause these problems.
Click to expand...
Click to collapse
Did we get any update on this, I have the issues on 3 phones..desire HD, sensation and a brand new Galaxy S3
modd1uk said:
Did we get any update on this, I have the issues on 3 phones..desire HD, sensation and a brand new Galaxy S3
Click to expand...
Click to collapse
I hope so. My One S is experiencing the same thing. I've tried everything above. No luck. Some stuff is fairly critical that I get it as soon as it comes in. I might try getting ahold of a Nexus 4 and do some testing with its wifi, just to make sure it isn't a general Android problem.
What router do you have? My issue was any android device in the house. Turned out it was my router, I put a custom firmware on it and all my trouble have gone away. My friend has the WiFi issue on a virgin media superhub.
Sent from my HTC Sensation Z710e using Tapatalk
I have an Asus RT-N66U. Funny you should suggest that. I'd planned to throw Tomato on it tonight and see how that works out. I did some tests at my folks' and their router had the same results. It's some cheap Netgear thing. Not sure of the model at the mo. I'll post back with results. If not tonight, tomorrow some time.
No go
Well that was unsuccessful. Actually it slowed things down. With the default firmware I get notifications from the instant I press power to wake up my phone. With Tomato there was a second or so before I got them.
Time to try DD-WRT tonight to see if that does the same thing.
I have an rt-n56u so the older version of yours and I'm running the Asus wrt that is being made, its fixed all my problems and is awesome tbh.
Sent from my HTC Sensation Z710e using Tapatalk
Set Beacon mode power safe (BMPS) to 0 in WiFi ???.ini config file should resolve this problem.
Such ???.ini config file usually placed under /system/etc/wifi or /system/etc/firmware/wlan/prima/
hi friends this is my first post in GS3 world. We live in a rural area and are dependent on good WIFI service - I do tech work so the WIFI in the hacienda is very robust. All our other many devices love the WIFI rig: 2 ipad mins, one Galaxy Note 1, another older Galaxy, two laptops, one HTPC, etc. Only the new-to-me GS3 has issues with it. The visual indicator on the handset seems to not give an accurate picture, so we keep going into settings and seeing what is reported there... "Strong" signal is usually what displays, but in use, sending messages, making wifi calls, whatever, the results are pretty bad. We're using the stock messaging [google] app and stock T-Mobile WIFI calling app.
I want to say that web browsing is a little better, but can't really give details.
ROM etc:
android 4.1.2
baseband T999UVDMD5
Kernel 3.0.31-1128078
build JZ054K.T999UVDMD5
searching around the web I see a lot of the same complaints but really lousy diagnosis and lousier fixes [turn off 'data'; reboot the handset; call T-mobile... that sort of 'fix']
What is the scoop? Is there an internal WIFI antenna connection inside that needs to be checked?
Is there some elusive patch from Samsung?
Is the rig Channel-sensitive? [some older handsets only liked channel 11, or others only channel 6, etc.]
pls point me to the definitive thread if there is one...
thanks in advance
I'm not sure of any threads with much information on this. I don't recall seeing very many WiFi issues at all with the S3.
Are you rooted? Custom ROM?
If so you may want to try some of the other modems/baseband. Link in my Sig.
Otherwise, maybe try Odin flashing the UVDLJC or LJA firmware.
You say it's new to you, so I'm assuming you got it used. Do you know who you bought it from and did they report any problems?
How does it perform on other WiFi networks?
Sent from my SGH-T999L using xda premium
DocHoliday77 said:
I'm not sure of any threads with much information on this. I don't recall seeing very many WiFi issues at all with the S3.
Are you rooted? Custom ROM?
If so you may want to try some of the other modems/baseband. Link in my Sig.
Otherwise, maybe try Odin flashing the UVDLJC or LJA firmware.
You say it's new to you, so I'm assuming you got it used. Do you know who you bought it from and did they report any problems?
How does it perform on other WiFi networks?
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Yep, flash stock or root66 firmware of choice. We will go from there.
Aerowinder said:
Yep, flash stock or root66 firmware of choice. We will go from there.
Click to expand...
Click to collapse
its all stock now.
are you saying to go ahead and nuke, reinstall stock ROM?
I don't have the option of going down Root66 - we are utterly dependent on WIFI Calling.
Is there a way to stop scanning selectively? that is, when I am on my own AP, there's no point in constantly scanning - there are other very weak wifi AP's in the vicinity and I"m wondering if somehow that causes an issue? my Note 1 is rock-solid. I don't recall a single drop with it in the 6 months I've had it. Most disconcerting is when WIFI calling drops - I've been using T-mobile devices for years and only once did I have one for which WIFI calling would disconnect, restart, and reappear like this. It will drop out, then refind its WIFI connection, then you get the "WIFI is Ready" all over again, just like you do when Rebooting the phone.
cognus said:
its all stock now.
are you saying to go ahead and nuke, reinstall stock ROM?
I don't have the option of going down Root66 - we are utterly dependent on WIFI Calling.
Is there a way to stop scanning selectively? that is, when I am on my own AP, there's no point in constantly scanning - there are other very weak wifi AP's in the vicinity and I"m wondering if somehow that causes an issue? my Note 1 is rock-solid. I don't recall a single drop with it in the 6 months I've had it. Most disconcerting is when WIFI calling drops - I've been using T-mobile devices for years and only once did I have one for which WIFI calling would disconnect, restart, and reappear like this. It will drop out, then refind its WIFI connection, then you get the "WIFI is Ready" all over again, just like you do when Rebooting the phone.
Click to expand...
Click to collapse
Yes, nuke everything. That's the only way we can rule out modified/mismatched firmware as a cause.
root66 is stock firmware with root injected into the system image. So wifi calling will still be there. It's just whether or not you want root.
Also wipe data/factory reset. If using stock recovery, this WILL wipe your internal SD. Backup your user apps with TiBu/RTB, and your internal SD card. Do not backup system apps.
You can adjust scanning frequency with build.prop modifications, but I personally use Tasker to control when it's on and off.
ahh. my fault.
ok, we'll get on it tonight and report back when squeaky clean.
Aerowinder said:
Yes, nuke everything. That's the only way we can rule out modified/mismatched firmware as a cause.
root66 is stock firmware with root injected into the system image. So wifi calling will still be there. It's just whether or not you want root.
Also wipe data/factory reset. If using stock recovery, this WILL wipe your internal SD. Backup your user apps with TiBu/RTB, and your internal SD card. Do not backup system apps.
You can adjust scanning frequency with build.prop modifications, but I personally use Tasker to control when it's on and off.
Click to expand...
Click to collapse
please; need a little guidance
Friends, I successfully nuked the GS3, flashed with Root66, got everything working really well but the WIFI issues resurfaced.
Does the GS3 just have a really weak radio?
Compared to even the most humble Galaxy S4G [old and tired], its WIFI performance is not impressive.
Compared to my personal Galaxy Note 1 running more/less stock ICS, its awful ... annoying, unreliable, glitch.
WHY?
My suspicion is that it has trouble switching/credentialing/authenticating from one physical router/AP to another. In our wifi lan setup we have a common AP composed of 2 routers of different chipsets/mftr. Works dandy on ipads, iphones, windows 8, windows 8.1, my Note 1, older/retired/sold androids, etc. The Galaxy S3 is pretty much alone at having trouble when the physical signal of one gets weak and the second one is available - it seems to fumble the ball. Thus, you try to make/receive/talk wifi Call, and get random drops, retries, reload of the WIFI Calling APP.
is there a fix?
Set static channel?
Set static IP [instead of DHCP/select] ?
Grab inSSIDer from the play store, it'll show you if you are on the best wifi channel for your network.
Try turning off some of your other devices wifi connections. May be that the router isn't handling them all at once very well.
Do you have anything that operates on the Wireless-G standard? If so shut it down. Itll only severely degrade the entire networks performance.
You need to be rooted for this, but try the LJC and LJA modems, others too if your up for it.
Does it exhibit the same problems on other wifi networks?
Sent from my SGH-T999 using xda premium
Thank you for helping!
OK - Let me ask a question [it is rooted - root66 per above, busybox, SU, etc]:
I've used InSSIDer before and moved channels here and there and what I noticed is that the way inSSIDer deals with signal data display, whatever channel you pick, it will show one of the other channels as being "better". switch to that channel, and it will show some other channels to be better, etc round and round we go. maybe I'm not using it right...
as to G-only devices I'll give that a shot - I think one of my windows units may be all G. easy fix.
To me it seems clear: the places where the GS3 goes ambiguous and fails to maintain a connection is where the two AP signals [again, one AP,one login, one authentication type, but 2 physical] are pretty evenly matched, per how WIFI Analyzer displays the data. If I shut off the tertiary router, it will just drop signal when you move a tad too far away which is what one would expect, but the GS3's "reach" is the worst of the lot. I'm hoping somebody has figured out how to get hold of that radio and boost the signal.
I don't have a feel for how it does otherwise - we are dependent on WIFI calling at home/office - when out and about its the usual drill... sit in the right spot at the restaurant and you're good.
Those modems you suggest: do they support T-mo WIFI calling APP ?
DocHoliday77 said:
Grab inSSIDer from the play store, it'll show you if you are on the best wifi channel for your network.
Try turning off some of your other devices wifi connections. May be that the router isn't handling them all at once very well.
Do you have anything that operates on the Wireless-G standard? If so shut it down. Itll only severely degrade the entire networks performance.
You need to be rooted for this, but try the LJC and LJA modems, others too if your up for it.
Does it exhibit the same problems on other wifi networks?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
cognus said:
Thank you for helping!
OK - Let me ask a question [it is rooted - root66 per above, busybox, SU, etc]:
I've used InSSIDer before and moved channels here and there and what I noticed is that the way inSSIDer deals with signal data display, whatever channel you pick, it will show one of the other channels as being "better". switch to that channel, and it will show some other channels to be better, etc round and round we go. maybe I'm not using it right...
as to G-only devices I'll give that a shot - I think one of my windows units may be all G. easy fix.
To me it seems clear: the places where the GS3 goes ambiguous and fails to maintain a connection is where the two AP signals [again, one AP,one login, one authentication type, but 2 physical] are pretty evenly matched, per how WIFI Analyzer displays the data. If I shut off the tertiary router, it will just drop signal when you move a tad too far away which is what one would expect, but the GS3's "reach" is the worst of the lot. I'm hoping somebody has figured out how to get hold of that radio and boost the signal.
I don't have a feel for how it does otherwise - we are dependent on WIFI calling at home/office - when out and about its the usual drill... sit in the right spot at the restaurant and you're good.
Those modems you suggest: do they support T-mo WIFI calling APP ?
Click to expand...
Click to collapse
As or inssider, or any similar app, I don't go by what it says is the best channel. I simply look for the channel that has the fewest networks overlapping it. It probably tells you a different one us best each time because its taking into account that there is now another network on the previously recommended channel, yours.
If you have a single G device on an N network, it'll slow the entire network down to wireless-g speeds. So yeah, shut down that machine and ill bet you see improvements across the board. (You may need to reboot the network and other devices)
If you have one router and one AP but both with the same ssid and pw that may be causing your problems. With this type setup there's no way to really be sure which you're connected to. You may connect when close to one, but when you move away from it and closer to the second, it won't connect to the closer/stronger one automatically. Even if you turn it off then on again, it may still connect to the first if the signal is strong enough, even though there may be a stronger one available.
Try having it connect to the ap using different credentials and then you should have greater control over which you're using at a given time.
Allthe modems should function properly with everything they are supposed to, so yes they'll all work for wifi calling. I was looking into a way to adjust the Tx power for wifi a long time ago. Ill see if I can find what I was doing and try again. If you use a 3rd party router firmware (dd-wrt or tomato), you can adjust Tx power on the router itself if I remember correctly.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
If you have a single G device on an N network, it'll slow the entire network down to wireless-g speeds. So yeah, shut down that machine and ill bet you see improvements across the board. (You may need to reboot the network and other devices)
If you have one router and one AP but both with the same ssid and pw that may be causing your problems. With this type setup there's no way to really be sure which you're connected to. You may connect when close to one, but when you move away from it and closer to the second, it won't connect to the closer/stronger one automatically. Even if you turn it off then on again, it may still connect to the first if the signal is strong enough, even though there may be a stronger one available.
Click to expand...
Click to collapse
in reverse order:
- as to to the wifi device power/range I was speaking of the phone/handset, not the router. But since you mentioned: I have not found an N or beyond router that has GOOD open source; open-wrt, dd-wrt, tomato et al - if you really read carefully what the feedback is, a lot of them suffer bad speed degradation. the old wrt54gl's would run full-tilt G speeds, over a wide range, and last for many years, but I have not found the equivalent in any other device running or capable of running one of the good [or formerly good] open-source codebase
- Are you sure about that client-bridging common-ssid/pw/encryption? the whole point of such firmware is to make the transition seamless and it is for every device except the GS3: two ipad's, one Galaxy S4G [999v], one Galaxy note T879 [debloated stock ics], two HP workstations, three laptops - gateway, thinkpad, hp Envy - not one of those devices gags when switching router signals. only the GS3. with the other devices, you literally forget that you've got multiple routers
The GS3 code has multiple network notifications also that the other two Galaxy's do not: it interrupts your blasted work to INFORM you that you're signal is dropping [how dumb is that?] - then it informs you that you've been disconnected, and informs you that you're "not registered on the network", then it informs you that it is logging in again, then it informs you that WIFI Calling App is ready for use as though it was the first time you used it.
- I will give the modems a whirl. I'll stash a full nandroid and try them out - If any of you happen to have a link to the 'how to' steps pls pass on as it will save me a lot of careful reading.
oh, and I was wrong about G-device; i replaced that one with an N device. Frankly, G speed is way fast enough. my internet connection is only 20Mbps so if I had the old WRT rigs back and up/running it would be PLENTY fast. Mixing B with G... now that was a real problem - there you were talking about effectively 1 to 5 Mbps
cognus said:
in reverse order:
- as to to the wifi device power/range I was speaking of the phone/handset, not the router. But since you mentioned: I have not found an N or beyond router that has GOOD open source; open-wrt, dd-wrt, tomato et al - if you really read carefully what the feedback is, a lot of them suffer bad speed degradation. the old wrt54gl's would run full-tilt G speeds, over a wide range, and last for many years, but I have not found the equivalent in any other device running or capable of running one of the good [or formerly good] open-source codebase
- Are you sure about that client-bridging common-ssid/pw/encryption? the whole point of such firmware is to make the transition seamless and it is for every device except the GS3: two ipad's, one Galaxy S4G [999v], one Galaxy note T879 [debloated stock ics], two HP workstations, three laptops - gateway, thinkpad, hp Envy - not one of those devices gags when switching router signals. only the GS3. with the other devices, you literally forget that you've got multiple routers
The GS3 code has multiple network notifications also that the other two Galaxy's do not: it interrupts your blasted work to INFORM you that you're signal is dropping [how dumb is that?] - then it informs you that you've been disconnected, and informs you that you're "not registered on the network", then it informs you that it is logging in again, then it informs you that WIFI Calling App is ready for use as though it was the first time you used it.
- I will give the modems a whirl. I'll stash a full nandroid and try them out - If any of you happen to have a link to the 'how to' steps pls pass on as it will save me a lot of careful reading.
oh, and I was wrong about G-device; i replaced that one with an N device. Frankly, G speed is way fast enough. my internet connection is only 20Mbps so if I had the old WRT rigs back and up/running it would be PLENTY fast. Mixing B with G... now that was a real problem - there you were talking about effectively 1 to 5 Mbps
Click to expand...
Click to collapse
I havent used any 3rd party firmwares for my networks in a long time. I was assuming that for the Wireless-N routers, they would have come a long way and solved a lot of their issues by now. My mistake.
I am sure about the router/ap setup. (Is your second set up as an Access Point or Repeater? Either way the same issues can still present themselves) I refer you to the following website for information on this and a little bit to back up my claim. It may be worded better or easier to understand than me, but either way its good info.
http://www.smallnetbuilder.com/wire...w-to-add-an-access-point-to-a-wireless-router
Step 3 is where this is touched on.
I have to be honest that I am skeptical that your other devices are transitioning over to the AP. (im guessing they are ALWAYS connecting to the AP) Unless their radios are actually much weaker than the GS3's. In fact, what I suspect at this point is that your GS3 is trying to connect directly to your router all the time, while your other devices are connecting to one or the other, all of the time. This is one of the draw backs to using the same SSID, it is difficult to tell which you are actually connecting to.
Read over that linked page. Let me know what you think.
Will do. thanks for that.
if your theory is right, on any one of the frequent auto-disconnect cycles, you're saying that the GS3 will connect to which? the stronger one? any idea how the firmware is setup to pick a winner?
Also, webbing around for answers [there are a LOT of threads on this issue as it turns out], there's a good deal of discussion about 5ghz vs 2.4ghz bands, and that samsung/t-mo have changed how the firmware handles transitions [or connect/disconnect] to one or the other. i.e. https://support.t-mobile.com/thread/37707?start=0&tstart=0
I can set my routers to one or the other if that would help - Any ideas if one is preferable?
Ever heard of GS3 being "channel sensitive"? I have not. Early WIFI/WIFI-Calling capable models from several mftrs were quite channel-nitpicky.
I could easily check that transition [seamless dropping of one, connecting to another] if there was a way to verify the MAC of the connected ap. know of such? I can't find much in the way of advanced settings but I have not a guide to the keyboard/manual settings methods for this build 4.1.2.
read the article but see no discussion of your point.
pick the right link?
the setup I'm using is simple wireless bridging - no physical medium between the twain. subordinate router has the mac address, encryption type, ssid, credentials and channel setting of the boss. reboot and done.
pretty much the same type of bridging as with DD-WRT [though it has a lot more options... more confusing]
I really think that the GS3 modems aren't that good, especially when it comes to wifi calling. My family and I haven been having some bad signal problems as of late so we've been relying on wifi calling to make calls. I had a lot of dropped calls in the past but I knew that had a lot to do with the old modem/router setup I was using. I would lose internet connection not matter what I was on. The internet would just drop and then reconnect, very frustrating if you were on a call or playing Xbox live. so last week I hooked up a new Comcast modem with wifi. The drops stopped but I still have to literally be standing right next to the modem if I wanted to make sure I didn't lose a call. If I walked into the kitchen, which is 15ft away, I'd get the little beep that warns that I'm about to lose the wifi signal. I know my signal that's coming from the router is good because all my devices, including the phone says so. Hell, the kids across the street asked if they could have the password because their internet was shut off and my signal is strong over there.
I don't have anything technical to support what I say, just experience but that experience tells me that Tmobile's wifi calling doesn't work that well unless your within 3 ft of the router.
cognus said:
Will do. thanks for that.
if your theory is right, on any one of the frequent auto-disconnect cycles, you're saying that the GS3 will connect to which? the stronger one? any idea how the firmware is setup to pick a winner?
Also, webbing around for answers [there are a LOT of threads on this issue as it turns out], there's a good deal of discussion about 5ghz vs 2.4ghz bands, and that samsung/t-mo have changed how the firmware handles transitions [or connect/disconnect] to one or the other. i.e. https://support.t-mobile.com/thread/37707?start=0&tstart=0
I can set my routers to one or the other if that would help - Any ideas if one is preferable?
Ever heard of GS3 being "channel sensitive"? I have not. Early WIFI/WIFI-Calling capable models from several mftrs were quite channel-nitpicky.
I could easily check that transition [seamless dropping of one, connecting to another] if there was a way to verify the MAC of the connected ap. know of such? I can't find much in the way of advanced settings but I have not a guide to the keyboard/manual settings methods for this build 4.1.2.
Click to expand...
Click to collapse
Accorfong to my research it'll try to always connect to the first one it connected to. Even if the signal is stronger on another. That's the main point I was linking to that article for.
As for which band to choose, 2.4 is usually best. 5.0 is faster, but with a shorter range and more susceptible to interference.
tmob removed the option as you can manually select which you prefer. There is an apl I include with all my roms though that'll give this option back. Let me know if you want the link, though I doubt it'll help ypur particular problem.
cognus said:
read the article but see no discussion of your point.
pick the right link?
the setup I'm using is simple wireless bridging - no physical medium between the twain. subordinate router has the mac address, encryption type, ssid, credentials and channel setting of the boss. reboot and done.
pretty much the same type of bridging as with DD-WRT [though it has a lot more options... more confusing]
Click to expand...
Click to collapse
Ok, so its more of a repeater setup. The routers are not connected to each other via Ethernet or powerline?
Step 3 of that article is what I wanted you to read. Its on the 2nd page. (Though I do suggest reading the whole of both pages)
nataku199 said:
I really think that the GS3 modems aren't that good, especially when it comes to wifi calling. My family and I haven been having some bad signal problems as of late so we've been relying on wifi calling to make calls. I had a lot of dropped calls in the past but I knew that had a lot to do with the old modem/router setup I was using. I would lose internet connection not matter what I was on. The internet would just drop and then reconnect, very frustrating if you were on a call or playing Xbox live. so last week I hooked up a new Comcast modem with wifi. The drops stopped but I still have to literally be standing right next to the modem if I wanted to make sure I didn't lose a call. If I walked into the kitchen, which is 15ft away, I'd get the little beep that warns that I'm about to lose the wifi signal. I know my signal that's coming from the router is good because all my devices, including the phone says so. Hell, the kids across the street asked if they could have the password because their internet was shut off and my signal is strong over there.
I don't have anything technical to support what I say, just experience but that experience tells me that Tmobile's wifi calling doesn't work that well unless your within 3 ft of the router.
Click to expand...
Click to collapse
Make sure you don't have a bottleneck somewhere on your network. (Such as a misconfigured router, a docsis 1.0 cable modem, etc.) Or as I stated before, if you have a wireless g device active on your network, it'll force the whole network to degrade to wireless g speeds. Also use inssider to check if you are on the best channel. And check for any points of interference. (Microwaves, cordless phones, power hungry appliances, etc)
If your cell signal went south recently, it may be due to the work tmobile has been doing. What worked best before, may not anymore. Try out the many other available modems to see if it improves.
Sent from my SGH-T999 using xda premium
---------- Post added at 05:08 PM ---------- Previous post was at 05:06 PM ----------
Thos is a copy/paste of the text I was referring to.
(Starting under step 3)
But most wireless clients are very "sticky" and tend to stay associated to the first AP they encounter,*even when APs with stronger signals are available. So I recommend setting a*different SSID*for the AP, so that you can manually control connection.The other advantage of setting a different SSID for the AP is that you'll be able to see both the AP and your main wireless router if you're using the Wireless Zero Configuration utility that is built into Windows. Even in Vista, Microsoft has stubbornly chosen to not show multiple wireless networks that use the same Network Name / SSID.
4) Set the AP channel
One large network practice that you*do*want to follow is to set the AP to a different channel than the main wireless router. In the U.S. you should use only the non-overlapping channels*1, 6 and 11. So if your main wireless router is set to channel 6, set the AP to either 1 or 11.You should probably do a quick site-survey first (see this HowTo), to make sure that you aren't setting the AP channel to one used by a neighbor's network. If you can't find a completely clear channel, choose the*weakest*neighboring network and set the AP to its channel.
Sent from my SGH-T999 using xda premium
I'll look into it.
Thanx
So i have noticed that while i am on wifi for example the videos on instagram take a while to load, this is kind of crazy because i am on fios 5G internet on wifi. Im coming from iphone so i know there was an option on iPhones that chose to give more prescedence that if you were connected to wifi it used the internet from that then the provided one from T-mobile for example. So my questions is, has this happened to anyone else? Or is there any other solution to this?
I've been experiencing the same issue since the time I purchased the device and I'm yet to come across any particular solution. A workaround that I've found is disconnecting the wifii, reconnecting it and then rebooting the device. It starts to work normally after doing those 3 things for at least a day.
I had the problem too. My router was having issues with ipv6 firewalls and only the 5ghz had issues. I solved mine by downloading a VPN app. I'm using NoRoot Firewall and everything works fine now.
Sent from my Pixel XL using Tapatalk
raghuvir12 said:
yes i have also same issue many times and i have found some useful links to solve this issue
http://www.thecrazythinkers.com/how-to-fix-google-pixel-xl-phone-wifi-issues/
hope this will give you solution same as me.
Click to expand...
Click to collapse
FWIW: #9 can't work. There's no option in stock recovery to wipe cache partition.
Wow this is ridiculous man for paying about $1,100 for this phone, these issues shouldnt even be there to begin with.
Try disabling wifi scanning?
bbb90104 said:
Try disabling wifi scanning?
Click to expand...
Click to collapse
where do you find that? but even if so im connected to wifi already why would the phone be searching for additional access points?
Settings -> location -> scanning (three dots on the top right).
I think it scans for other wifi in the area to help pinpoint your location (not sure how google does it).