Develop Bugs

JBX Help

Please help. I have flashed the kernel provided in the thread (by Supervenom) and now i cannot get into recovery to flash rom. What should i do? Please help! My phone is just black screen. It gets the pxp logoand than black...

akcentstyle said:
Please help. I have flashed the kernel provided in the thread (by Supervenom) and now i cannot get into recovery to flash rom. What should i do? Please help! My phone is just black screen. It gets the pxp logoand than black...
Click to expand...
Click to collapse
http://www.box.com/s/pcslaphpx4sqx3mi2bc9
Download this, put it in your fastboot directory, rename it to recovery.img, then on your command line, enter...
Code:
fastboot boot recovery.img
This will live boot a recovery for the play, this is when you flash JBX.
Just to be safe, do the following after getting into recovery.
*Wipe Data/Factory Reset
*Wipe Cache Partition
*Wipe Dalvik Cache
*Format /system
*Install JBX
*Power off phone and enter fastboot mode
*Flash Supervenom Kernel
*Boot into recovery using the method I gave you
*Wipe Data, Cache, Dalvik Cache
*Boot into phone
For JBX, I think you were supposed to flash the rom first, then the kernel, but you're guaranteed to run the recovery with this method. That's why I never use the recoveries that come with kernels.

[Q] TripnDroid problems

Hi
I just flashed Tripndroid CM10 0.28 by
flashing boot.img through fastboot usb
going into recovery and factory resetting
then flashing the rom
and then reboot system
When it boots up it says gapps stopped and sais unfortunately setup wizard has stopped, have I done something wrong here?
How can I get it to work?

you have not wiped cache...
1. download rom and gapps,transfer them to root of SD card
2. extract boot.img(the kernel) from ROM zip and place it in fastboot folder
3. go into bootloader, FIRST flash the boot.img in fastboot(does the screen say FASTBOOT USB when u connect the phone to the PC?)
4. go into recovery, then FULL WIPE-factory reset, erase cache and dalvik cache.
5. then flash the ROM.
6. boot into the rom.then again enter into recovery and then flash gapps.
do the above steps in the same order all over again....it should work

htc amaze stuck on boot after upgrade to 10.1 issue

Hi,
I am trying to upgrade my htc eamaze (ruby) to Cyanogenmod 10, but after installation in recovery mod, it stuck on boot white screen. I read on somethread that flash boot into android phone but that shows the boot animation and then gets restarted. What can be the issue? Please help. I am following the steps as:
Boot into Clockwordmod Recovery
Factory Reset/wipe data
Wipe cache partition
wipe Dalvik cache
install from sd card CM 10
install from sdcard gapps
Reboot system now
For flashing boot.img
fastboot flash boot boot.img
I have downloaded cm-10.1-20130518-UNOFFICIAL-ruby and gapps-jb-20130812-signed
Please help !!!!.
Thanks

Can't delete a rom (CM11) to install new one

****edit: It appears that the option "format /system" which is tucked away in a sub menu did the trick and erased the rom.
I am trying to completely delete a rom I have installed which is CyanogenMod 11 but it seems to stay no matter what, or I'm not doing it right.
First I go into recovery with the power+vol down and choosing recovery.
I have ClockworkMod 5.8.1.5.
From there I choose the wipe data/factory reset and also the wipe cache partition and wipe dalvik cache.
Then I choose the install zip from sd card to install Blackout_ICS_Incredible_v4.0.zip
After following the installer instructions and rebooting it goes back to CM11...
Any ideas how to wipe CM11 from my device?
Thanks :good:

Netanel1 said:
****edit: It appears that the option "format /system" which is tucked away in a sub menu did the trick and erased the rom.
I am trying to completely delete a rom I have installed which is CyanogenMod 11 but it seems to stay no matter what, or I'm not doing it right.
First I go into recovery with the power+vol down and choosing recovery.
I have ClockworkMod 5.8.1.5.
From there I choose the wipe data/factory reset and also the wipe cache partition and wipe dalvik cache.
Then I choose the install zip from sd card to install Blackout_ICS_Incredible_v4.0.zip
After following the installer instructions and rebooting it goes back to CM11...
Any ideas how to wipe CM11 from my device?
Thanks :good:
Click to expand...
Click to collapse
Try formatting with fastboot.
Boot your device into fastboot and type these commands
Code:
fastboot devices
Just to be sure ur devic is connected
Code:
fastboot format system
Code:
fastboot format data
Code:
fastboot format boot
If the above doesnt work, susbtitute
Code:
format
with
Code:
erase

4EXT Recovery 1.0.0.6 R2
try changing the recovery via bootloader, download latest 4ext recovery zip then rename it to PD98IMG and place it to your root directory of your sdcard. Then go into bootloader it will automatically detect zip file and will ask you for update, press volume up to start the update, reboot and your done. After flashing new recovery go into recovery and then wipe/format from there format all partitions except sd card. When done go back to main menu and select info to see the free space/size of all partitions.
Device: HTC Desire HD
ROM: CM11 M8.1
Recovery: 4EXT 1.0.0.6 R3 build 8
If it helped you then pressing then press the thanks button.

After flashing the sybria 9.0 rom into my mix 2, my phone stuck in the fastboot mode.

After flashing the Syberia 9.0 rom into my mix 2, my phone stuck in the fastboot mode. Every time I tried to reboot my phone, my phone will go right into the fastboot mode. I could get into the TWRP, and I perform the 'wipe' serval times.
This is what happens on my phone:
wipe the system---- flash the rom ------ reboot ----- fastboot mode
I don't know what happens with my phone. Pls help me guys:crying:

Could I try to use the official miui fastboot update via the mi flash?

Try installing again with "Clean Flash". Wipe System, Cache/Dalvik and format Data (don't wipe data).
Backup your data first, because your data will destroy.

I believe you should already have the ROM, Firmware and Gapps into internal storage.
Now boot to recovery.
Wipe Data (if u are decrypted, format data)
But be aware that formatting Data means that you have to again copy everything back to internal storage using adb. So my advice is to just wipe and see if that works out.
Install Firmware, ROM and Gapps zip.
Order of installation should be same.
Reboot - 1st boot may take some time.