Related
Hey guys,
I recently called T-Mobile and asked for an unlock code for my Dash, but when I received it I got my friends SIM card to try and it said the code was incorrect. I typed i *#06# on my phone and the IMEI matches the one I gave them, so does anyone know what the problem is? I recently installed Kavana's 6.1 ROM, so would that be a reason why? Thanks!
MKDaMan1818 said:
Hey guys,
I recently called T-Mobile and asked for an unlock code for my Dash, but when I received it I got my friends SIM card to try and it said the code was incorrect. I typed i *#06# on my phone and the IMEI matches the one I gave them, so does anyone know what the problem is? I recently installed Kavana's 6.1 ROM, so would that be a reason why? Thanks!
Click to expand...
Click to collapse
The 4-digit PIN code on a SIM card is something different to a SIM lock - which code are you talking about?
I'm talking about an 8-digit unlock code I got from T-Mobile. I borrowed my friend's SIM (which is a Cingular SIM) so I could test to see if the unlock code worked, but it didn't.
MKDaMan1818 said:
I'm talking about an 8-digit unlock code I got from T-Mobile. I borrowed my friend's SIM (which is a Cingular SIM) so I could test to see if the unlock code worked, but it didn't.
Click to expand...
Click to collapse
The unlock code sent from T-Mobile should've worked... The only thing I could recommend would be to double-check the code they sent you. Make sure it's the same one you're entering. You said that the IMEI that pulled up after entering *#06# is the same as the one you first gave them. That should eliminate the IMEI as a potential problem.
I ran into this when I unlocked mine... What I ended up doing was rebooting, entering in the code with My T-Mobile SIM in, then switching to an non T-Mobile SIM after the unlock to make sure it was unlocked.. it was.
Bupahs said:
I ran into this when I unlocked mine... What I ended up doing was rebooting, entering in the code with My T-Mobile SIM in, then switching to an non T-Mobile SIM after the unlock to make sure it was unlocked.. it was.
Click to expand...
Click to collapse
How do you enter the unlock code while using the T-Mobile SIM??? I always knew the phone to need a SIM of a different carrier.
Yeah I wanna know that too... I really want this thing unlocked! I appreciate all the help.
I should have been more clear. Reboot the device with the other providers SIM, the simlock dialog should kickin, then before you enter in the code take that SIM out and put yours in, enter the code then switch the cards again.. Thats how I got mine to work.
I used a Nextel SIM if it matters.
I've also heard that there has been success with a program called DASHv2Unlock, it forces the device into the simunlock mode without a forgien SIM in it. I was going to hunt it down but my method ended up working in the end
I was trying to change the theme on my shadow to shadow sliding panels.zip.However was promoted to load celecmd on my storage card and run the cmd. I don't know how to proceed from there cos i am not familiar with the cmds.Pls can somebody help me with this thing by outlining the cmd on this postp.i will appreciate the efforts from some one.
Hi there.
I have a problem with sim unlocking my phone. T-Mobile already gave me my unlock code.
I entered it once, and it told me wrong code. I don't know if I typed the wrong code or if they sent me one. I swear i only did it once.
Anyway, my problem right now is that when I insert a new sim card, it does not prompt me for an unlock code.
My sim card is unaccessible plus I don't have any signal.
I already have done a hard reset twice, and still not prompt.
Can anyone help me how to make the phone prompt for the sim unlock code?
did u buy it off someone?
Nope. My service provider, T-Mobile gave it to me.
I also have flashed to the phone to the latest ROM here. Still no go...
yoshiboy_21 said:
Nope. My service provider, T-Mobile gave it to me.
I also have flashed to the phone to the latest ROM here. Still no go...
Click to expand...
Click to collapse
You need to flash to a 6.0 or 6.1 rom so you can get the sim unlock message. If you flashed a 6.5 rom this will not happen.
This is something that is on the sticky. On that note, thread closed.
I have a SaskTel Samsung Galaxy S3 (SGH-I747M, baseband version I747MVLLE8) that is locked, and I want to unlock it. But when I insert a foreign SIM (from AT&T) I get no prompt for an unlock code. Instead it just says "No SIM card. Emergency calls only." I've contacted several of the online unlock code suppliers and they say without this prompt I can't unlock the phone. I've also tried to enter variations of the *7465625* code, but they do nothing at all. SaskTel says they don't provide unlock code. This despite the fact that I purchased the phone outright, and have no contract with them. Am I totally hooped, or is there some way I can get this phone unlocked?
ddice said:
I have a SaskTel Samsung Galaxy S3 (SGH-I747M, baseband version I747MVLLE8) that is locked, and I want to unlock it. But when I insert a foreign SIM (from AT&T) I get no prompt for an unlock code. Instead it just says "No SIM card. Emergency calls only." I've contacted several of the online unlock code suppliers and they say without this prompt I can't unlock the phone. I've also tried to enter variations of the *7465625* code, but they do nothing at all. SaskTel says they don't provide unlock code. This despite the fact that I purchased the phone outright, and have no contract with them. Am I totally hooped, or is there some way I can get this phone unlocked?
Click to expand...
Click to collapse
try another SIM, maybe the one you're using is borked.
Try this
#7465625*638*# (Insert Network Lock Keycode)
Sent from my SGH-I747M using xda app-developers app
cue_32 said:
Try this
#7465625*638*# (Insert Network Lock Keycode)
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I've already tried that, the phone doesn't respond to this keystroke sequence.
dLo GSR said:
try another SIM, maybe the one you're using is borked.
Click to expand...
Click to collapse
Possible, but I doubt it, since it works just fine in another phone. In any case I don't have another one to try.
Misread
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
lamsik said:
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
Click to expand...
Click to collapse
That and probably every variation of it I can think of! I am wondering though, is this code internal only to the phone, or does it go to the cellular network? When I do type it, it does nothing, though if I send it I get an "Invalid USSD" message returned from the network.
lamsik said:
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
Click to expand...
Click to collapse
this code doesn't work on the LTE variants of the SGS3. most of the multi-stage codes (####*###) don't work, you just end up with an error.
Correct as stated. Additionally, if you have a foreign micro sim, and you are not on a stock ROM, the unlock screen prompt will not show. I was running AOKP, and could not get the prompt to show, so I flashed back to stock, unlocked phone, then flashed back to AOKP, bc TW sucks!
Sent from my SAMSUNG-SGH-I747 using xda premium
Gerbowski said:
Correct as stated. Additionally, if you have a foreign micro sim, and you are not on a stock ROM, the unlock screen prompt will not show. I was running AOKP, and could not get the prompt to show, so I flashed back to stock, unlocked phone, then flashed back to AOKP, bc TW sucks!
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
This is what I was starting to suspect. Can you refer me to a good, really clear step by step procedure to do this? I've never done this with a phone, and since I live in a small town, I doubt I can find anyone to help me here. So a step by step would be nice. Thanks.
ddice said:
This is what I was starting to suspect. Can you refer me to a good, really clear step by step procedure to do this? I've never done this with a phone, and since I live in a small town, I doubt I can find anyone to help me here. So a step by step would be nice. Thanks.
Click to expand...
Click to collapse
are you on a stock ROM?
i have a i747M and unlocked it with the at&t micro sim, so i know it works,
did u cut ur at&t sim down to size ? maybe u did it wrong and it wont recognize, or ur sim slot is ****ed up ....
ur best bet right now is to try another micro sim
Ok, I've now got my phone rooted. Can someone suggest how I can get the ROM set so that it will allow me to enter the unlock code when I insert a foreign SIM.
There's a 3rd potential method that hasn't been mentioned on here that we see working for most Samsung handsets. In fact, for some Samsung handsets (usually older ones) it is the only unlocking method that will work.
It is:
1. Turn on the phone with a non accepted or accepted SIM card inserted
2. Type #0111*CODE# replacing CODE with your network unlock code
However, if your service provider lock is active, then you'll need to use the code #0133*CODE# instead.
All unlocking methods (once you have the unlock code) are available here: http://www.mobileunlocked.co.uk/samsung-instructions.asp
Hope that helps.
Did you manage to unlock?
I'm facing the exact same issue. My S3 doesn't show the network unlock prompt when I insert a foreign SIM. Mine is locked to AT&T. It's also SGH-I747 model
You could try and unlock your phone as per this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Then try the SIM card after the phone is unlocked.
Oh, I believe this only works on Stock ROMS.
Tybalt said:
You could try and unlock your phone as per this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Then try the SIM card after the phone is unlocked.
Oh, I believe this only works on Stock ROMS.
Click to expand...
Click to collapse
Follow the link Tybalt quoted, you will unlock your phone and the sim won't ask for an unlock code because well, it's unlocked.... Follow the instructions, you need to be on JB 4.11 for this to work, some have had success on custom roms but not many....you don't need to root to do this and make sure when you see the success code you have 40 at the end not 30... i did this a couple times... 30 I think basically means you have locked it again ... and in the instructions when it says wait 30 or 60 seconds... you really do have to wait.. don't be impatient....it's a huge thread with many many successes.....
Samsung Galaxy S3
I have the same issue but I have a sgh-i747 Samsung galaxy S3 i brought it to koodo and was told it was a compatible phone with the company when unlocked. The problem/question i have is When i insert my new simcard the screen will not display any prompt to input a unlock code. It just says emergency calls only or unregistered sim. I inserted my sim card into another s3 same model, software versions, different provider, and the phone asked for the unlock code right when powered on. So i tried and flashed a new firmware but its doing the same thing.
I called koodo and they gave me instructions to create a new apn of Koodo SP it did not make my phone prompt me for an unlock code.
When i send an email to any website about unlocking my phone they advice me not to purchase there product if my phones not prompting me for a unlock code that will it more then likely not work.
I've seen methods online of using these to input an unlock code "#0111*UNLOCKCODE#" or "#7465625*638*UNLOCKCODE#" but when i tell the unlock website this information this still tell me not to purchase there product and i mean many numerous websites. I do not want to buy an unlock code only to try to input it with these methods and have it not work. Which i highly dought it would because the normal 7465625 command doesnt work either.
I also tried this factory unlock and it did nothing
PLEASE HELP!?!?
mobileunlocked said:
There's a 3rd potential method that hasn't been mentioned on here that we see working for most Samsung handsets. In fact, for some Samsung handsets (usually older ones) it is the only unlocking method that will work.
It is:
1. Turn on the phone with a non accepted or accepted SIM card inserted
2. Type #0111*CODE# replacing CODE with your network unlock code[/URL]
Hope that helps.
Click to expand...
Click to collapse
Thank you so much for this!
Whenever I typed any variation of the #7465625 code I would get the "emergency calls only" message. #0111*CODE# did the trick!
The provider didn't even know this, the best they could come up with after numerous calls to their hotline is that the phone was broken and/or that the SIM card was badly inserted, thus I should mail them the phone to the other side of the country for unlocking. Would they even have known how to do it over there?
My grandma says thanks!
Hi.
I am unsure if my phone is unlocked and can proceed with porting my number over to Metro PCS. Please help me with advice how to proceed. I decided to move my service to Metro PCS since they are now a Tmobile company and after lots of research, I found that I can use my current phone/software as long as it was unlocked. I recently purchased my Galaxy s4 second hand and assumed it was not unlocked. I had immediately rooted it and flashed a new rom (Insane Kitkat 4.4.4). The phone has been working well. I already have requested and have my unlock code from Tmobile.
When I went to the Metro PCS store to port over my number, the phone did not request an unlock code when inserting their Metro PCS sim card (not activated). They said that my phone may already be unlocked or that it may not need to be unlocked since Metro is now owned by T-mobile. They stated that it may work if they go through the entire registration process, port over my number and activate it but that it would be a gamble. If it did not work, then I would not be able to go back and reactivate my sim immediately with Tmobile since it would then be in deactivated status with them.
I tried to find out if it is already unlocked by *#7465625# but my phone will not run this or any other USSD codes to verify. I keep getting errors when trying any USSD codes. A message says 'USSD code running' then "unable to process request".
A friend of mine has an activated Galaxy S4 on Metro PCS and I tried inserting her sim card to prompt for the unlock code but my GS4 just booted normally then showed 'not registered on network'. It did, however, have cellular signal bars. When I inserted my Tmobile sim into her GS4 it did ask for the unlock code normally.
I am at a loss now..
funny, I like to know if there is a way to check carrier unlock status for simcard without having to put a simcard in.
T-Mobile phones work with metropcs without the need to unlock
Could the custom rom be suspect?
Maybe need a stock rom to get carriers sorted out, then go to custom roms.
Pp.
serio22 said:
T-Mobile phones work with metropcs without the need to unlock
Click to expand...
Click to collapse
I ended up contacting Tmobile and they stated that the phone showed unlocked status already but I think you are correct. I wasn't aware they could tell me this. It was very fast and super easy to find out.
I have the phone working great on Metro PCS now. USSD codes still failing though...
AT&T has given me an unlock code to release the phone so i can use it on sprint. The instructions say that a prompt should appear when putting in the sim, but nothing has happened. I was wondering if there was a way to force the prompt so I can input the code.
I'm on ICE rom, could that be a reason why I'm not getting the prompt? Can I go to the AT&T store with the unlock code and have them sim unlock it?
thanks.
Akosp said:
AT&T has given me an unlock code to release the phone so i can use it on sprint. The instructions say that a prompt should appear when putting in the sim, but nothing has happened. I was wondering if there was a way to force the prompt so I can input the code.
I'm on ICE rom, could that be a reason why I'm not getting the prompt? Can I go to the AT&T store with the unlock code and have them sim unlock it?
thanks.
Click to expand...
Click to collapse
Are you sure the phone is locked to AT&T? You title says "Unlocked HTC 10....". Your device could already be unlocked. Also, which sim card are you inserting and expecting code prompt to appear?
This is how it is normally done:
Lets say your device is locked to AT&T at the moment. You have to put another carrier's sim card(T-Mobile for example), then the code prompt should appear on the screen asking for the code.
Att never carried this phone...so how could they give you an unlock code? None are simlocked to ATT.
The guy I originally bought the phone from purchased the phone from HTC.com, which he then activated on att. when I bought the phone from him and tried to activate it on sprint, sprint told me the phone was carrier locked to att and I would have to request for an unlock code.
my unlock release went through and they emailed me the code, but when I put in my sprint sim card that sprint sent to me, there is no prompt that appears where I can put the 8 digit unlock code.
Wonders_Never_Cease said:
Att never carried this phone...so how could they give you an unlock code? None are simlocked to ATT.
Click to expand...
Click to collapse
yeah I didn't know they did simlock either but I guess when you use a phone on their network it does.
when I tried to activate on sprint they said I had to take care of the att lock first. I have the unlock code but no idea where to use it. do I need to do something through the dialer?
Put Sprint sim in the device boot it up... IF theres a lock on the sim slot, it should ask for an unlock code which is input through the dialer when prompted
Akosp said:
The guy I originally bought the phone from purchased the phone from HTC.com, which he then activated on att. when I bought the phone from him and tried to activate it on sprint, sprint told me the phone was carrier locked to att and I would have to request for an unlock code.
my unlock release went through and they emailed me the code, but when I put in my sprint sim card that sprint sent to me, there is no prompt that appears where I can put the 8 digit unlock code.
Click to expand...
Click to collapse
If device was bought from htc.com, then it should be unlocked already. I believe the radio frequency in your phone may not be fully compatible with Sprint.
Just check HTC's website and you will see that they offer separate models for Verizon and Sprint. - http://www.htc.com/us/go/buy-htc-10/
For example I have a T-Mobile service, so I purchased an unlocked HTC 10 which is compatible with AT&T as well. If I would have another carrier, such as Verizon or Sprint, then I would choose accordingly.