Im currently running CleanRom. I was going to download SlimICS. I was told to flash it you need CWM so I tried to flash it through fast boot and which said OKAY. Once I tried to go into recovery I was in a bootloop with the HTC logo and the red warning. Had to hold the power to get the phone to cut back on. Now when I try to go into recovery it just sits on the HTC Logo screen. Can someone help me fix this please?
1. Reboot in Bootloader. (Power + Volume - )
2. Select Fastboot mode.
3. Open your cmd (for windows). Go to Fastboot folder.
4. Connect your phone to your PC.
5. Type: fastboot erase cache.
6. Then type fastboot reboot-bootloader
7. disconnect your phone from your PC and then enter to Recovery mode. That's it.
Cheerz
semdoc said:
1. Reboot in Bootloader. (Power + Volume - )
2. Select Fastboot mode.
3. Open your cmd (for windows). Go to Fastboot folder.
4. Connect your phone to your PC.
5. Type: fastboot erase cache.
6. Then type fastboot reboot-bootloader
7. disconnect your phone from your PC and then enter to Recovery mode. That's it.
Cheerz
Click to expand...
Click to collapse
+1 :good:
Tried that and it didn't work. Was able to get the stick recovery bit then couldn't get into the rom so I had to run the RUU. Havr to root and unlock again. Atheist it works. Thanks for replying
Sent from my HTC One X using Tapatalk 2
Related
Hi Everyone,
I was trying to install the vemon viper x 3.3.6 (Im kind of new to flashing rom onto phones) onto my htc one x and had to update my hboot from 0.98 to 1.31 which i did with JBW tool and worked perfect and i unlocked my bootloader again but wen i was finished unlocking my bootloader i accendently factory reset my phone so it removed the vemon viper x 3.3.6 zip folder off my phone and cant run my old rom which is the vemon viper x 2.7 as it isnt a jellybean rom. So when i start my phone it loads the rom but doesn't boot. All i can get into is my hboot. My htc one x is s-on as well. Please any help would be great.
Flash a recovery, mount usb storage, copy rom to phone and flash it.
TToivanen said:
Flash a recovery, mount usb storage, copy rom to phone and flash it.
Click to expand...
Click to collapse
I flashed clockworkmod recovery onto my phone but i cant get into my phone to use the usb storage option to copy the rom onto my phone.
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Mr Hofs said:
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Click to expand...
Click to collapse
I will giv it a go, thanks for your help
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
rwhelan said:
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
Mr Hofs said:
rwhelan said:
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
It couldn't fastboot the boot.img file so decided to install it from recovery i see now that was a bit of a mistake. I will " fastboot erase cache" and fastboot the boot.img. Hope for the best
Click to expand...
Click to collapse
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Mr Hofs said:
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Click to expand...
Click to collapse
I have one last big problem, my phone is on a boot loop after trying to install my rom from recovery and the battery is too low so it wont allow me to flash anything onto my phone. What can i do???
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up !
Mr Hofs said:
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up ![/QUI
I cant get into the recovery. Is there anything i can do??
Click to expand...
Click to collapse
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Mr Hofs said:
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Click to expand...
Click to collapse
I am going to sound very stupid. Could you give me the exact line of command to use if the fastboot folder is saved in the local storage on the computer (c: drive), i dont want to do more damage then i have.:silly:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Mr Hofs said:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Click to expand...
Click to collapse
The file worked perfectly just opened it in the fastboot files and left it run all night. Then fastboot erase cache and the recovery is back up and running just have to flash the boot.img and phone up and running. Thanks for your help.
No problem. Glad its sorted !
Hello
I am following the following tutorial below to install the clockworkmod recovery but when I enter the cmd fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img. The cmd prompt displays the message "waiting for device" but does not do anything. Am I doing anything wrong?
1. Download and place the package file onto your Desktop.
2. Extract files from the package to your Desktop.
3. Connect your smartphone to the PC using the USB cable.
4. Double-click the Start Here.bat file to open the Command Prompt Window.
5. Enter the following command into the Command Prompt Window:
adb reboot bootloader
6. Your smartphone should reboot into the Fastboot mode.
7. Now, enter the following command into the same Command Prompt Window:
fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
8. After the recovery has been installed on your smartphone, issue the following command:
fastboot reboot
9. Your smartphone should reboot.
Thank You
mfredy said:
Hello
I am following the following tutorial below to install the clockworkmod recovery but when I enter the cmd fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img. The cmd prompt displays the message "waiting for device" but does not do anything. Am I doing anything wrong?
1. Download and place the package file onto your Desktop.
2. Extract files from the package to your Desktop.
3. Connect your smartphone to the PC using the USB cable.
4. Double-click the Start Here.bat file to open the Command Prompt Window.
5. Enter the following command into the Command Prompt Window:
adb reboot bootloader
6. Your smartphone should reboot into the Fastboot mode.
7. Now, enter the following command into the same Command Prompt Window:
fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
8. After the recovery has been installed on your smartphone, issue the following command:
fastboot reboot
9. Your smartphone should reboot.
Thank You
Click to expand...
Click to collapse
Are your drivers installed already?
bananagranola said:
Are your drivers installed already?
Click to expand...
Click to collapse
Yh, I have installed all the latest driversss
mfredy said:
Yh, I have installed all the latest driversss
Click to expand...
Click to collapse
Is your phone in debug mode?
bananagranola said:
Is your phone in debug mode?
Click to expand...
Click to collapse
yupppppppppppp
mfredy said:
yupppppppppppp
Click to expand...
Click to collapse
No idea then. Post the entire log.
mfredy said:
yupppppppppppp
Click to expand...
Click to collapse
Were your drivers installed with the phone unplugged?
-Check your data-sync cable,It should not only allow your device to charge but also data-sync.( Try with another data-sync cable)
-As you stated drivers are installed.Then when you're on bootloader,It should show HBOOT-USB. If that shows than try doing same thing again.
Or else follow simple steps below:
-Copy CWM recovery.img into fastboot files.
-Unplug your device if connected to computer.
-Manually power off your device.
-Press Volume down + Power button,It will redirect into hboot.
-Select Bootloader by clicking on power button,It will change color of HBOOT from Blue to Red.
-Next thing you'll notice that it stated as HBOOT USB.
-Put your phone on side and do same commands fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img
-Fastboot reboot.
Once process been done. Unplug it and boot device normally. And to check whether there's a recovery.img installed or not,Just power off your device and put on charge. In CWM it will redirect your into recovery mode while device is switched off.
4EXT Recovery Touch
Try 4EXT Recovery Update , install app , download 4EXT Recovery . Done
Hi all,
After I've installed color os 2.1.1 from sniper-joe I cannot back into my recovery.
The phone can boot on OS and in fastboot but not into recovery.
My phone still boot loop as long I press volume down. When I release the button I'm in fastboot.
Model x9006
I try to remove SD and SIM : same
I've installed different TWMP and CWM : same
I've got some issue with 2.1.1 and want to go back to 2.0.8 but cannot
Mine has too after installing the official Lollipop, any help? Lollipop was buggy for me so I'd like to unbrick my Oppo.
So plug in phone AFTER booting into Fastboot mode (power+volume up) then open a command window by pushing shift and right clicking anywhere that the platform-tools folder is and then type fastboot devices and hit enter and then type fastboot oem unlock and hit enter and then fastboot flash recovery recovery.img or whatever the name of your rcovery is then just power+volume down and boot into the recovery. It helped me!
droidiam said:
Mine has too after installing the official Lollipop, any help? Lollipop was buggy for me so I'd like to unbrick my Oppo.
So plug in phone AFTER booting into Fastboot mode (power+volume up) then open a command window by pushing shift and right clicking anywhere that the platform-tools folder is and then type fastboot devices and hit enter and then type fastboot oem unlock and hit enter and then fastboot flash recovery recovery.img or whatever the name of your rcovery is then just power+volume down and boot into the recovery. It helped me!
Click to expand...
Click to collapse
You need one of these recoveries if you own a R63419 LCD (newer find 7 have this model) - For me the first was OK :
forum.xda-developers.com
/find-7/find7-development/x9076-r63419-lcd-recoveries-t3049886
Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource
Nightsource said:
Hello guys,
After doing oem unlock with fastboot ,i've tried to flash TWRP recovery but after the comand i cannot acess recovery, it just reboots. Tried several recovery images and read alot of toturials but with no sucess!! Win10 64bits computer here.
Thanks,
NightSource
Click to expand...
Click to collapse
Did you hold the volume down button + power button to get to recovery mode manually right after flashing?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
If you have successfully unlocked the bootloader, you'll get a bootloader unlocked warning every time you boot. On the warning screen, click either of the volume buttons and you'll be redirected to a bootup menu. From there, you can select "boot to recovery" using the volume rocker and power button.
Alternatively, enable "advanced reboot" in developer options and reboot to recovery from the main OS power menu.
If these don't work, reflash TWRP using fastboot. Make sure that you're using at least version 3.0.3-1, best to use 3.0.4-1.
Tried manually reboot into recovery but it just reboots,
I can sucessfully unlock as i have the warning on boot, but there if i go to the menu and press for recovery it just reboots, tried several tipes of recovery TWRP imgs
Any help greatly wanted
Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.
Anova's Origin said:
Download this version of TWRP (jcadduono's 4.0.3-1). Rename the file to something like twrp.img.
1) Make sure adb/fastboot is working on your computer (if you've already unlocked the bootloader, then I am assuming it is).
2) Put your phone into fastboot mode and connect it to your computer. Open a command prompt where you can access fastboot.
3) Put the twrp.img file to the same folder where you opened your command prompt.
3) Enter
Code:
fastboot devices
in fastboot and make sure your phone shows up with its serial number.
4) Enter
Code:
fastboot erase recovery
to erase your current recovery
5) Enter
Code:
fastboot flash recovery [B]twrp.img[/B]
, where twrp.img is whatever you named your twrp file.
6) Enter
Code:
fastboot reboot
to reboot into your main system. You can either reboot then use advanced startup to enter recovery, or press a volume button at the bootloader warning page to boot directly to recovery.
Click to expand...
Click to collapse
Sometimes it helps to use fastboot to boot the image directly after you flash it. This ensures you get into recovery since it loads it off your computer.
It should then work normally afterwards
Sent from my ONEPLUS A3000 using Tapatalk
after a reset, the phone writes system has been destroyed, and the volume down button does not work for me,twrp too, because I once installed and I had the same error when I went to twrp.dificult situation.i hope in your help.
erjanfromkyrgyzstan said:
after a reset, the phone writes system has been destroyed, and the volume down button does not work for me,twrp too, because I once installed and I had the same error when I went to twrp.dificult situation.i hope in your help.
Click to expand...
Click to collapse
EDL flash stock again
1. Download 10.0.13.0 fastboot images, MiFlash 2017.04.25, ADB drivers 1.43, and install them
2. Extract the fastboot images to Hard Drive's root folder (such as D:/)
2. Boot to fastboot (power + vol down)
3. Type 'fastboot oem edl'
4. Open MiFlash. Locate the fastboot images
5. Select 'clean all'. Do not select clean + lock. Start flashing
6. If 'success' is displayed, long-press power and wait until 'welcome' is displayed.
7. And you're basically done. Your data has been deleted with the process tho'.
RFD80M-75679 said:
EDL flash stock again
1. Download 10.0.13.0 fastboot images, MiFlash 2017.04.25, ADB drivers 1.43, and install them
2. Extract the fastboot images to Hard Drive's root folder (such as D:/)
2. Boot to fastboot (power + vol down)
3. Type 'fastboot oem edl'
4. Open MiFlash. Locate the fastboot images
5. Select 'clean all'. Do not select clean + lock. Start flashing
6. If 'success' is displayed, long-press power and wait until 'welcome' is displayed.
7. And you're basically done. Your data has been deleted with the process tho'.
Click to expand...
Click to collapse
my volume down button does not work
RFD80M-75679 said:
EDL flash stock again
1. Download 10.0.13.0 fastboot images, MiFlash 2017.04.25, ADB drivers 1.43, and install them
2. Extract the fastboot images to Hard Drive's root folder (such as D:/)
2. Boot to fastboot (power + vol down)
3. Type 'fastboot oem edl'
4. Open MiFlash. Locate the fastboot images
5. Select 'clean all'. Do not select clean + lock. Start flashing
6. If 'success' is displayed, long-press power and wait until 'welcome' is displayed.
7. And you're basically done. Your data has been deleted with the process tho'.
Click to expand...
Click to collapse
Help pls
erjanfromkyrgyzstan said:
Help pls
Click to expand...
Click to collapse
You have to hold the power and volume down to boot to fastboot until fastboot logo appears. If really broken button, I guess shorting the test pins can boot it to EDL. Need open device though.
Some tutorial video on Test point EDL (non-English): https://m.youtube.com/watch?v=BrEyAEXid_o