CyanogenMod 10 preview builds for Acer Iconia A100 (vangogh)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an early release preview of things to come, we are 99% functional hardware wise, but there is still a fair bit of work to do under the hood.
CM10 is still in early stages of development, but, is progressing at a rapid pace... Things will be broken & not all features from CM9 have been ported (yet).
Expect some weirdness, breakage & other things.
pio_masaki has started a thread for general user discussion in general... I will be monitoring that thread too.
Posts giving thanks, telling us that you're downloading now are not wanted nor needed in this thread.
It is about development, for reporting bugs, working on & contributing to fixes/solutions.
Please respect this wish... hit the thanks button & move on to general.
Working:
Wifi
Bluetooth
Storage
Sound
Camera
GPS (Hax)
2d/3d acceleration
HDMI video
HDMI audio
H/W rotation lock
Not working:
??
Reporting bugs:
Please check post 2 to see if it has already been mentioned, if not, make a post, but, be prepared to provide more information (logcats etc) if requested
Full credits to the whole team @ CyanogenMod
Thanks:
randomblame for the early port work & as always, lively discussions in IRC
pio_masaki for all the testing on the a100 device & for being such a helpful & awesome dude.
gh123man for the soon to be ported rotation switch handler
Downloads
Big thanks to lifeofcoding for the hosting
Known issues:
Boot animation is a little funky for the a100... (screen will blank out momentarily)
Remove post please. Skimmed right over that part.
tidewaterns said:
Thanks!!! I am downloading as we speak to give this a try. :good:
Click to expand...
Click to collapse
Did you read the OP? Those kind of posts aren't allowed here.
waydownsouth said:
Known issues:
Boot animation is a little funky for the a100... (screen will blank out momentarily)
Click to expand...
Click to collapse
Is there a gapps for this ROM? Can we use the one from jeallybean a100? Thanks
diegof18 said:
Is there a gapps for this ROM? Can we use the one from jeallybean a100? Thanks
Click to expand...
Click to collapse
This could have been directed to the general thread, but yes the gapps from jellytime work fine with CM10.
Tapatalked from my Galaxy S II.
Hi Guys,
I have just noticed that google voice search keeps crashing as soon as it opens. I have attached a logcat of it.
very good keep going, but how i can install this rom ? can you tell me step by step ? and turkish language supported ?
aquarist said:
very good keep going, but how i can install this rom ? can you tell me step by step ? and turkish language supported ?
Click to expand...
Click to collapse
I don't know if you have already made any changes to your device, so I'll start from the beginning. I'm assuming that you're running stock ICS. If this is the case, then do as follows:
- Root your device
- Unlock the bootloader
- Flash a custom recovery - Either CWM or TWRP (both are usable to flash this rom; it's just user preference)
You'll then make a nandroid backup, factory reset the device and format partitions. After this, flash the rom (place the file on your sd card and install it).
See here for a more detailed approach: http://forum.xda-developers.com/showthread.php?t=1711125.
mogydy said:
Hi Guys,
I have just noticed that google voice search keeps crashing as soon as it opens. I have attached a logcat of it.
Click to expand...
Click to collapse
Try clearing google search data then do this: menu/settings/uncheck google search suggestions. If you can get it open that is.
siris420 said:
Try clearing google search data then do this: menu/settings/uncheck google search suggestions. If you can get it open that is.
Click to expand...
Click to collapse
I'm afraid that didn't help. from the logcat error, it looks like it's a native library loading issue.
Is this Rom having problem mounting external SD card to /external_sd instead of standard /sdcard?
My internal storage has been filled up for this issue!
Is this good on the A200?
Sent from my A500 using Tapatalk 2
eruisi said:
Is this Rom having problem mounting external SD card to /external_sd instead of standard /sdcard?
My internal storage has been filled up for this issue!
Click to expand...
Click to collapse
The internal storage is /sdcard.
MikeyCriggz said:
Is this good on the A200?
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
No, this will not work on an a200.
Side note: Let's move all this discussion to the general thread. Any further questions/issues (unrelated to development) should be stated in the general thread.
Error external sd
I'm very happy, thank you, but I only need to solve a problem and is mounting the internal sd sd external, I get problems with applications, we know something. thanks
legalizacion_24 said:
I'm very happy, thank you, but I only need to solve a problem and is mounting the internal sd sd external, I get problems with applications, we know something. thanks
Click to expand...
Click to collapse
Read the post above yours.
legalizacion_24 said:
I'm very happy, thank you, but I only need to solve a problem and is mounting the internal sd sd external, I get problems with applications, we know something. thanks
Click to expand...
Click to collapse
This can go into the general thread as mentioned, however I will say this:
Everyone stop using the mount swap on jellytime and/or CM10. Its not fully compatible. Stop asking questions about it, it is NOT ROM related, its the script.
If you choose to use it (your choice of course) we can not and will not help diagnose, troubleshoot or update to fix issues caused by it. If you use that script, don't report issues at all until its removed and they persist.
Tapatalked from my A100 - CM10 Build 4
new build up,
Rotation switch is working, there are a couple of related ui elements still remaining in the settings app, still WIP there.
Theme engine is back!
enjoy
Is there a reason that I can make all of the apps rotate, but not the home screen? The phone interface is awful when stuck in landscape.
LoverBoyV said:
Is there a reason that I can make all of the apps rotate, but not the home screen? The phone interface is awful when stuck in landscape.
Click to expand...
Click to collapse
This belongs in the general thread where it is explained and mentioned numerous times.
Tapatalked from my Galaxy S II.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
REQUIREMENTS
Click to expand...
Click to collapse
- TF300T (it can be installed on TF300TG but no 3G support!)
- Unlocked bootloader
- Your bootloader must be at least on Jelly Bean version (10.4 and above). - We recommend that you run the 4.2 Bootloader.
DOWNLOADS
Click to expand...
Click to collapse
Google Apps:
http://goo.im/gapps
Nightlies:
http://get.cm/?device=tf300t
HOW TO INSTALL
Click to expand...
Click to collapse
First installation :
1) Unlock your device, and install CWM recovery : http://forum.xda-developers.com/showthread.php?t=1668173
2) Push the update zip to your internal memory
3) Reboot in recovery (Shutdown tablet, press Vol Down + Power, then press Vol Up when prompted)
4) Make a backup
5) Navigate to "Install zip from sdcard", "Choose zip from sdcard", and choose the update zip you previously pushed to your tablet
5a) If you want Play Store, flash gapps now too (link above)
6) Go back and Wipe data/cache
7) Reboot
Updating from previous build:
1) Push update zip to /sdcard/
2) Reboot in recovery
3) Flash as above
4) Reboot
If any issue after updating, wipe data.
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#tf300t/cm10.1/next
SOURCES
Click to expand...
Click to collapse
http://github.com/cyanogenmod
http://github.com/cyanogenmod/android_kernel_asus_tf300t
http://github.com/cyanogenmod/android_device_asus_tf300t
DEVELOPERS
Click to expand...
Click to collapse
xplodwild, bumble-bee (for tf201 device tree from which this tree is inspired), loganmc10, dasunsrule32 for some help, cyanogenmod
SUPPORT US
Click to expand...
Click to collapse
You can either help us by giving FULL bug reports WITH LOGS, WITH REPRO CASE, ETC, or by submitting patches.
If you're not a developer, but still want to support you can hit the "Donate to me" button up ahead. Remember this is something I'm doing in my free time, so a small gift is always appreciated and motivates me to keep on updating the port Thanks to all donators!
First one FTW! :laugh:
Nice work, much broken?
Sent from my ASUS Transformer Pad TF300T
No, actually its running very nice.
Rotation is not working, SU bug nothing to be afraid of
mikaole said:
No, actually its running very nice.
Rotation is not working, SU bug nothing to be afraid of
Click to expand...
Click to collapse
Easily fixed by downloading SuperSU, and disabling Superuser (app) within the Apps section of Settings.
Yeah, finally! Thanks for this build, but I have one problem that wasn't mentioned before: My music is in the now playing section just showing kind of nothing (see in the Attachments) - I runned supercharger for a bit increasements in reaction time, maybe this is the issue if no other ppl are reporting this (or it's just the apk I dloaded from Google Play )
btw any chance to see a kernel with increased I/O to the official version from unter's source maybe? (yeah, they aren't up to date for 4.2, but Asus I/O is not really godlike lol )
Testing now things like surfing etc. - if there are more issues I'll report :good:
Just installed Play Music from Play Store, and the app seems to work fine. Let it some time to sync maybe?
As for I/O patches, some are already in sources, and I can't find any relevant commit at untermensch's github besides CPU/GPU clock changes.
Ok, I think I noticed differences without OC, but maybe it was GPU OC
btw Trebuchet is force closing for me when hiding the search bar, is this only my fault?
btw btw: google play music (and other laagish screens) "fixed" by letting the ROM be the ROM and set I/O to deadline...
Time to do some installing!
Is GPS still ****ed?
I installed this ROM just to check it out, but now I want to restore my previous backup. I went to TWRP but it says I don't have any! I checked my /data partition, and it's completely different, and a lot of stuff is missing.
Any help?
I'm not sure but some I/O patches are in ramdisk - means untermensch kernel have other ext4 mount options. And about the GPU and CPU OC, as I know this comes from that untermensch kernel emulates the TF700T hardware.
Northern-Loop said:
Time to do some installing!
Is GPS still ****ed?
Click to expand...
Click to collapse
Everyone reported it's fine.
atiatinini said:
I installed this ROM just to check it out, but now I want to restore my previous backup. I went to TWRP but it says I don't have any! I checked my /data partition, and it's completely different, and a lot of stuff is missing.
Any help?
Click to expand...
Click to collapse
Blame TWRP, they're not 4.2-compliant yet. Since multi-user arrived, all data is organised in subfolders inside /sdcard with IDs for every user (main user = 0), so you have something like /sdcard/0/actualdata
Where has USB debugging option moved to? Cant seem to find it.
Thanks
Nekromantik said:
Where has USB debugging option moved to? Cant seem to find it.
Thanks
Click to expand...
Click to collapse
Same here. No developer options and using "secure settings" from the play store is no help.
adb toggle from play store works!
tobdaryl said:
Same here. No developer options and using "secure settings" from the play store is no help.
Click to expand...
Click to collapse
Click several time on number build in settings - info phone
On Android 4.2 you have to to settings - about tablet and tap 7 times build number for developer options to appear
thanks
anyone got flash player installed on this?
XpLoDWilD said:
Everyone reported it's fine.
Blame TWRP, they're not 4.2-compliant yet. Since multi-user arrived, all data is organised in subfolders inside /sdcard with IDs for every user (main user = 0), so you have something like /sdcard/0/actualdata
Click to expand...
Click to collapse
So it better to use CWM instead?
If you use CWM you can restore backups, seems like it's not possible (yet) on TWRP... So if you want to be on the safe side with backups, use CWM :good:
Maybe read this twrp link.http://teamw.in/androidmultiuser
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
Code:
*** Disclaimer by cdesai
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
Here goes my CM10.2 contribution to the good old Galaxy Tab 7". This is the ROM that I'm using and sharing with yout guys. It's based on the CyanogenMod ROM, with sgt7 repo goodies, sbradymobile's Trebuchet and Settings, OpenPDroid Patches to enable the use of the PDroid Manager Privacy App and hopefully humberos' kernel and TWRP Touch Recovery.
SGT7 Tabs - P1000, P1000N/L
CDMA - sorry, no prospect for now. Anyone able to help out there?
Click to expand...
Click to collapse
Features
Works: Everything except frontal pictures?
Click to expand...
Click to collapse
Installation instructions
Regular flash through CwM or TWRP Recovery:
Backup everything up!
Wipe/Factory Reset
Flash CM10.2 ROM.
Flash PDroid Patches (optional).
Flash GApps (optional).
Reboot.
Click to expand...
Click to collapse
Changelog
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
[20131103 ROM] My first good one. working good for me!
CwM Recovery, CM kernel, OpenPDroid optional ZIP...
Click to expand...
Click to collapse
Downloads
ROM, PDroid Patchs, separate kernel ZIPs, etc...
Alroger's Cafe-TI Download Page
Sources
https://github.com/CyanogenMod
https://github.com/sgt7
https://github.com/storm31
https://github.com/humberos
FAQ
The FAQ section in a thread is bound to grow over time... check for updates.
Q: How do I flash?
A: Learn that before coming here.
Q: How do I restore my {fill in here} ROM?
A: Learn that before coming here.
Q: How do I use ODIN?
A: Learn that before coming here.
Q: How do I use Heimdall?
A: Learn that before coming here.
Click to expand...
Click to collapse
Links and References
PDroid Manager Security App in the Play Store.
GApps (use the correct one, for Android 4.3.x / CM10.2.x only!)
storm31's experimental thread.
Click to expand...
Click to collapse
Troubleshooting
Mobile, Data, 3G problems? This ROM comes with the JPZ modem. You might need to flash your customary modem back. Just copy your modem.bin to /radio in the Tab.
Wrong MAC? Wrong IMEI? Try restoring files from /sdcard/backup/efs*/* to /efs/. If you don’t have a backup, then start over with FULL Restock, and next time save your backup/efs folders, which are created everytime you install CM10.1.
Market problems? Clear Google Services Framework data and reboot.
Multiple users is NOT supported by the OpenPDroid Patches.
Developer options: can’t find it? It’s hidden! Tap About tablet / Build number 7 times to unlock it.
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
No boot? Stuck at the SAMSUNG logo? Flash the correct kernel using Download Mode using heimdall!
Deep Sleep not kicking in? Try wiping cLock’s data or freezing / removing it (com.cyanogenmod.lockclock).
Click to expand...
Click to collapse
Thanks To/Credits
* humberos
* cdesai
* sbradymobile
* storm31
everyone involved! CyanogenMod peeps, TWRP peeps, Linux peeps, OpenSource peeps, Android peeps, XDA peeps...
Dev-Host Downloads and Ads
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float around and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I've never even noticed that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
reserve 3
I've got a cdma gtab and the resources to put up a build environment for it. I suck as a developer though, but would love 10.2 on my old tab so I'll take a crack at it if I can bug ppl here for help.
UPDATE 20131104 - kernel humberos v1.52
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
Thanks @storm31 for your repo / manifest!
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
papatzis said:
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
Click to expand...
Click to collapse
No, can't keep your configs between major CM versions... you can try, but usually ends up in bad results. I recomend factory reset / wipe and restore your apps and data using something like Titanium Backup, but NOT the system settings.
Yeah, gapps seems to be having temporary problems right now... how about this temp link for you guys in UbuntuOne: gapps-jb-20130813-signed.zip
subscribed
Sent from my GT-I9500
Hi
I just installed the rom and thank you very much it's better than official cm 10.1 for me
But also I found some more issues
- boot logo is still weird on startup
- seLinux does not enable, just freeze when click ok
- unable to reset data with sdcard erase, just rebooting and system is the same. clean data from cwm works ok
regards
Unable to setup restricted account. Crash when press setup icon from main user account
Sent from my GT-P1000 using XDA Premium 4 mobile app
"dirty" flashed (wipe of system, boot, cache and dalvik only) coming from storm31's 20th release and no apparent problems so far
Back camera does not suitable for videoconferencing. Got a lot garbage in preview overlay in Trueconf videoconferencing software. Front camera preview works ok, never got this bug in stock
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
The same result in HighSpeed Cam+ preview works only for 1024x600 and 800x600 other settings are garbage
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Dmaxx67 said:
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Click to expand...
Click to collapse
All my build tips in the CM10.1 thread. Not even a manifest to build cdma in cm10.2, or I would have shared. Feel free to test cm10.1 kernels with this ROM and share the results!
Thanks alroger for this. Will test it out soon :thumbup:
Sent from my GT-I9505G using Tapatalk 4
Firstly big thank alroger cdesai humberos koxudaxi et all, this build 20131104 has 487mb only, but on normal usage always available >100mb, hence response reactipon is really great. OC 1.4Ghz also stable, unlike 4.2 only manages 1.2Ghz.
Ok, possible bug report, bluetooth headset doesn't seem to be working with skype and oovoo, how to get logcat again! Thanks.
Can't detect headset device unless turn on DUT first then start BT in android. Inconclusive bcos only tried 1 DUT.
Sent from my GT-P1000 using xda app-developers app
Hi!
Thanks Alroger for keeping delivering to our old tabs
Came from Alrogers 4.2.2 date 10 aug.
Wiped and flashed.
Everything works great, also both cameras.
Only fc on browser so using chrome, and message app missing so im using Handcent.
Sent from my GT-P1000 using Tapatalk 2
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
goughymachine said:
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
Click to expand...
Click to collapse
Video playback is smooth for me so far on this ROM
Sent from my GT-I9505G using Tapatalk 4
alroger said:
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I never even knew that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
Click to expand...
Click to collapse
Quoting post #2. Check the image attached there.
What is NamelessROM?
NamelessROM Gerrit Review
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
ANNOUNCEMENT: We are looking for Device Maintainers to expand our support, please visit our IRC channel or PM @Evisceration, or @jumoog @dhiru1602 for information.
Disclaimer
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Working:
Everything (including hardware composer)
Click to expand...
Click to collapse
Got a bug report? Want to request a feature? Need extended support?
https://nameless-rom.org/
https://plus.google.com/communities/111682533298374492637
https://jira.nameless-rom.org/
Click to expand...
Click to collapse
Installation Instructions
FROM OTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM NamelessROM TO NEWER RELEASE
Just download the zip and flash it. You will NOT need to wipe anything.
Optionally you can also use our own OTA Updater
Click to expand...
Click to collapse
Contributions and Credit
Android/Google/AOSP
AOKP
AOSPA
CyanogenMod
OmniROM
SlimROMs
ALL OF OUR AWESOME TESTERS
Click to expand...
Click to collapse
Downloads
Rom:
http://sourceforge.net/projects/namelessrom/files/n-2.0/t0lte/
Gapps for 5.0:
https://s.basketbuild.com/gapps
Gapps mirror:
https://mega.co.nz/#!5R0D1B4L!1zP2aiDzlBAQ05I4UkgTNaVVLQME9Yjj1Fl7nwAPzs0
Click to expand...
Click to collapse
I'll give this a try, keep y all posted.
Is 3G fixed in this? With all other Roms 3G goes up and down continuously
Thank you for this Sir !!
Nameless has arrived !!...g
is netflix working? i know on cm12 its not.
Good news! awesome
It's so nice to have some Lollipop choices now. Thanks a lot. So there is no Netflix magic yet. Also, contact info not surviving reboots. -Thanks again
ruccarucca said:
is netflix working? i know on cm12 its not.
Click to expand...
Click to collapse
lollipop builds will currently not allow DRM protected content streaming..
It's a well known bug across all variant builds....and is being worked on...
It'll get a fix....just be patient....g
gregsarg said:
It'll get a fix....just be patient....g
Click to expand...
Click to collapse
What an amazing build , its nice and fast , one question , how come there is no task killer , like CM12 or anything , i try to hit the home botton and noting ,
other then that its so smooth
Joshua Mr PC Repair said:
What an amazing build , its nice and fast , one question , how come there is no task killer , like CM12 or anything , i try to hit the home botton and noting ,
other then that its so smooth
Click to expand...
Click to collapse
You need to config it in settings. Don't know why it defaults like this.
Currently I am only fixing device specific things. Need to fix proximity though...
DerTeufel1980 said:
You need to config it in settings. Don't know why it defaults like this.
Currently I am only fixing device specific things. Need to fix proximity though...
Click to expand...
Click to collapse
Thanks ill report back in a few day
The static audio issue happens to me when I receive a notification (at least while playing music over Bluetooth). Just reporting in
You can try this rom for working sensors
https://mega.co.nz/#!FAsTmQaS!oOA6rQa7zr6KUejPyfZkHJrqzh-gU7xlWj8X-d8CuW8
GPS is broken though
Gesendet von meinem GT-N7105 mit Tapatalk
does this work for i317m?
nosebleedXD said:
does this work for i317m?
Click to expand...
Click to collapse
yes im running it works fine youll just see in the about phone it will say gt-n1705 other than that i got no issues
Netflix sucks anyhow....showbox is so much better and theres no charge...ever.
DerTeufel1980 said:
You can try this rom for working sensors
https://mega.co.nz/#!FAsTmQaS!oOA6rQa7zr6KUejPyfZkHJrqzh-gU7xlWj8X-d8CuW8
GPS is broken though
Gesendet von meinem GT-N7105 mit Tapatalk
Click to expand...
Click to collapse
Just flashed the sensor fix ROM.
The GPS fix posted here works.
http://forum.xda-developers.com/showpost.php?p=57639586&postcount=54
I got 17/19 SATS right off the bat.
Thanks/Credit @fkfmfz and @gregsarg
The link is expired but I uploaded here.
https://www.androidfilehost.com/?fid=95864024717072099
Is there a way to have the notification sounds settings survive reboots? I have just been going through the settings each time and setting them all back to my choices each time I reboot.
Was it a dirty install? My settings are fine per reboot, aside from the Netflix issue and a freeze up that drained 40% battery, its been a decent ROM. I'm going to try the other 5.0 ROM whose thread says closed but is in fact still open.
It's a clean install. I had the same trouble on Kit Kat roms. I guess it may be something on my end.
-To clarify: this is only with custom sounds. MP3's or OGG files located either in stock internal location or external SD.
CyanogenMod 11 for the Samsung Galaxy Ace II x (GT-S7560M) and Galaxy Trend (GT-S7560)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Not working:
FM Radio
Bugs:
*Camera only 3.2 megapixels (2048x1536)
*Uploading/sending videos via Instagram,Facebook and Facebook Messenger fails
Downloads:
Latest Build CM11 April 23th 2017
CHANGELOG
*Optimized dalvik
*Switched to my kernel test branch
*Miscellaneous fixes
Latest EXPERIMENTAL build: ExperimentalCM11 April 26th 2017 (by @motoralbi)
EXPERIMENTAL-CHANGELOG
*Work on bionic
*Switching to faster math functions
XposedFix
Download XposedFix.zip and flash it to get xposed working.
I have to tell you that this fix is a pretty much a big security breach,and this hack will never be incorporated in to my builds.
Flashing this fix WILL REGRESS ALL THE DALVIK CHANGES we've done so far.I do not provide support for issues regarding xposed.
Installation Instructions & Requirements:
1. Copy zip packages (ROM) to an SD Card
2. Enter recovery mode
3. Choose "install zip from sdcard"
4. Select "choose zip from sdcard" and locate the ROM zip package
5. Confirm the installation by choosing "yes"
Recoveries:
I recommend you use TWRP 3.0.2 by @kengnatural
You can also flash by codename13s TWRP 2.8.0.1
If you do not have one installed, please install one of them prior to installing the ROM!
IF YOU WANT TO USE GAPPS WITH ANY OF MY BUILD,FORMAT /SYSTEM PARTITION,FLASH ROM,BOOT IT AND THEN GO BACK TO RECOVERY AND FLASH GAPPS YOU WANT!(DONT FLASH GAPPS BEFORE FIRST BOOT!!!!)
IF YOU DONT DO THIS YOULL GET THE MESSAGE THAT SETUP WIZARD STOPPED WORKING!
THIS GOES FOR EVERYONE!
I recommend you always do a CLEAN FLASH of all my builds
Little notice:
This rom is ported version of CM11 for s7562.
I would like to say thank you to all people that are/were working on this rom:
@jonypx09
@Codename13
@m4jonez
@KlinkOnE
@kengnatural (not only for work you are doing but for mentoring me too!!)
@oF2pks (for making patches and allowing us easily to add wakelock blocker to CM11!)
guys who test my builds and report everything:
@noobcoder
@F4uzan (providing moral support)
@GreekDragon (providing moral support,thanks my giros brate)
Cyanogenmod Team
Google
Maintainers:
@pavlepiramida
@motoralbi
If you find any new bugs please report and try to make a logcat of it or at least provide a detailed explanation (what happend,what were you doing,how was the phone behaving) so I can recreate that bug myself and try to fix it!
My Github account: https://github.com/pavlepiramida
FrankenKernel repo: https://github.com/pavlepiramida/FrankenKernel
Tips for usage
For best experience I suggest you:
*set your CPU Governor to lulzactive
*set your I/O Governor to zen or CFQ
*If you dont use memory hungry apps disable KSM (it will improve your battery life just a little bit and performance)
*go to Settings/Developer options and reduce all animations to 0.5
*disable all touch sounds
*turn off Daydream in Settings/Display & lights
*turn off profiles if you do not use them
*go to Settings/Privacy and disable CyanogenMod statistics reporting
*also while you are there if you are not using Blacklist disable it
Flashable Samsung stock ICS sounds : https://www.androidfilehost.com/?fid=745425885120704205
All my builds will support @microg patch for signature spoofing
To learn more about this and why its in this rom check out his thread
[APP] microG GmsCore - lightweight free software clone of Google Play Services
"Setting up Microg" on kylessopen devices by @Zeroblood
Here you can get help for setting up Microg.
my androidfilehost folder with all build so far: https://www.androidfilehost.com/?w=files&flid=156391
Hey Pavle,
Why do you suggest turning CM stat reporting off ? I understand it's not very useful, but is there a real performance gain, or just a marginal one ?
breversa said:
Hey Pavle,
Why do you suggest turning CM stat reporting off ? I understand it's not very useful, but is there a real performance gain, or just a marginal one ?
Click to expand...
Click to collapse
For me that is always off as it is pinging their servers on every boot and sometimes causes a wakelock.
I did notice a small boost in performance but that could very well be a placebo.
Disabling does not harm you,so why not turn it off
Haha, alright, I did not know about that potential wakelock.
BTW, I'll have my friend try out one these builds tomorrow to try and make that wifi work again. I'll keep you informed !
breversa said:
Haha, alright, I did not know about that potential wakelock.
BTW, I'll have my friend try out one these builds tomorrow to try and make that wifi work again. I'll keep you informed !
Click to expand...
Click to collapse
Im sure it was just a corrupt download.
If not we'll think of something!
can i install it with cwm 5.6?
tomyjeje said:
can i install it with cwm 5.6?
Click to expand...
Click to collapse
nope
flash TWRP (as I recommended TWRP 3.0.2 by kengnatural)
Hi! A couple days ago I saw there was a link in this thread to a version of this ROM with the Omni kernel, which would fix the wifi problem in Latin American devices. Now it's gone.
What happened? Did that fix not work out? I was planning to try it this weekend...
Thanks!
mincem said:
Hi! A couple days ago I saw there was a link in this thread to a version of this ROM with the Omni kernel, which would fix the wifi problem in Latin American devices. Now it's gone.
What happened? Did that fix not work out? I was planning to try it this weekend...
Thanks!
Click to expand...
Click to collapse
I had to remove it as it was going into bootloop after flash on new build.
I have to test it a bit more.
It works for my July build but in September I changed few things that apparently dont play well with codebame13 kernel.
If I dont sort it out,Ill upload whole July rom with his kernel packed in it!
Thanks for your work. I'm looking forward to it.
By the way, in case it's relevant, a while ago I tried your "fixWifi.zip" from an old release, and it wasn't working for me. (It disabled bluetooth like you said it would, but it didn't restore wifi.) I don't know if that has anything to do with how the new release will work, but I'm telling you just in case.
mincem said:
Thanks for your work. I'm looking forward to it.
By the way, in case it's relevant, a while ago I tried your "fixWifi.zip" from an old release, and it wasn't working for me. (It disabled bluetooth like you said it would, but it didn't restore wifi.) I don't know if that has anything to do with how the new release will work, but I'm telling you just in case.
Click to expand...
Click to collapse
Hah it wasn't working for anyone,few important files were missing but I was to lazy to remove it from androidhost :/
hey pavle, did you try to fix wifi on this build or just camera?
the wifi still not work, i take a logcat but there is no error about wifi.
https://drive.google.com/open?id=0B8oAXWJSnBcvZ2xMczloT3M3cTg
do you know why?
noobcoder said:
hey pavle, did you try to fix wifi on this build or just camera?
the wifi still not work, i take a logcat but there is no error about wifi.
https://drive.google.com/open?id=0B8oAXWJSnBcvZ2xMczloT3M3cTg
do you know why?
Click to expand...
Click to collapse
Thx for Logcat,Ill see if there's something new in it!
Just a quick question,did you logcat while turning wifi on?
EDIT
Dude your logcat is an empty .txt file....
Did you remove it from Drive?
Process error, on my gt s7560.. how to fix? pls
metodding said:
Process error, on my gt s7560.. how to fix? pls
Click to expand...
Click to collapse
redownload rom
pavlepiramida said:
redownload rom
Click to expand...
Click to collapse
is not resolved
metodding said:
is not resolved
Click to expand...
Click to collapse
Strange,Im having trouble downloading it myself....
Seems that its a issue on androidfileshost side,sadly nothing I can do.
I'd suggest,if you are downloading it via phone,to try and download it via PC (Firefox,Chromium,Chrome......etc) and manually move ROM to SD Card,as sometimes theres an issue with browsers for phone.
Refresh few times download page and try again,meanwhile Ill send an email to androidfiles staff to see if they are doing anything on servers (maintenance or something else).
Thanks for report and I hope it gets sorted out soon!
pavlepiramida said:
Strange,Im having trouble downloading it myself....
Seems that its a issue on androidfileshost side,sadly nothing I can do.
I'd suggest,if you are downloading it via phone,to try and download it via PC (Firefox,Chromium,Chrome......etc) and manually move ROM to SD Card,as sometimes theres an issue with browsers for phone.
Refresh few times download page and try again,meanwhile Ill send an email to androidfiles staff to see if they are doing anything on servers (maintenance or something else).
Thanks for report and I hope it gets sorted out soon!
Click to expand...
Click to collapse
Always run the download from PC, tried several times .. the error is present equally
metodding said:
Always run the download from PC, tried several times .. the error is present equally
Click to expand...
Click to collapse
Are you using any ADBlocker on browser?(If you are disable it)
Are you using a VPN?(If you are disable it)
Have you tried other mirrors to download from?(Try other mirrors that are available,I suggest Quebec mirror )