Develop Bugs

[Q] gahhhhhhh! please please help

i rooted my galaxy nexus last night, and today i was trying to put a rom on it, i went to wipe the cache, and now it wont boot past the google screen and im freaking out!

Before you flashed did you wipe system? Huh I bet not even so you only mention wipe cache....what about data , dalvik ?
Did you read directions in the op for the ROM?
Sent from my SPH-D710 using Tapatalk 2

it told me to wipe to factory, i tried doing that and it just froze, and now it wont boot. im trying to figure all this out but im a little over my head unfortunately.

Try booting into recovery and then wiping and flashing your ROM

i was trying to flash the codename android 1.6 rom, i cant post the link it wont let me

when i boot into recovery mode, it shows a droid with its chest open and a red exclamation point

I've never heard of that ROM but in fastboot will it let you use your volume and power keys to navigate to recovery? If not, try using fastboot commands on the computer to get into recovery (if you can? I'm not too acquainted with fastboot commands)

i can get into recovery but then it shows the droid with the red alert

m4gkman said:
i can get into recovery but then it shows the droid with the red alert
Click to expand...
Click to collapse
That's fastboot. Try looking into fastboot commands and see if any command will let you boot into recovery from there.

You buggered the boot image... Just flash it again, via fastboot...
They are normally in .Franco kernels...

you mean through terminal and stuff? my knowledge to this stuff is still pretty basic so im trying to grasp all of this

familyguy59 said:
You buggered the boot image... Just flash it again, via fastboot...
They are normally in .Franco kernels...
Click to expand...
Click to collapse
so fastboot is throught he computer?

m4gkman said:
so fastboot is throught he computer?
Click to expand...
Click to collapse
Yes. Fastboot is used, in CMD (Windows) Gnome terminal (Ubuntu/Linux distributions) and the Mac OS terminal...
You need to install the ADB drivers and download the fastboot/adb files first, though (Check the Windows 8 thread (In my signature), all you need is in there...
Or, download a .Franco kernel (Check the developement section, for your device (GSM/verizon/Sprint) and search the forum...

i did fastboot and all that stuff on my laptop at home(the one i rooted it with), do i basically need to redo all of that?

m4gkman said:
i did fastboot and all that stuff on my laptop at home(the one i rooted it with), do i basically need to redo all of that?
Click to expand...
Click to collapse
Yes, but just flash the boot.img
Code:
fastboot flash boot %Userprofile%\Downloads\<Whatever the file is named>.img

Ngo93 said:
That's fastboot. Try looking into fastboot commands and see if any command will let you boot into recovery from there.
Click to expand...
Click to collapse
No, that is not fastboot. That is recovery. He has the stock recovery flashed, which is the Android lying on its back with a red exclamation point.
m4gkman said:
i can get into recovery but then it shows the droid with the red alert
Click to expand...
Click to collapse
You need to flash CWM before you do anything else. Get it from the link in my signature and flash it in fastboot. Then boot into CWM, do a wipe, and re-flash the ROM you want.

efrant said:
No, that is not fastboot. That is recovery. He has the stock recovery flashed, which is the Android lying on its back with a red exclamation point.
You need to flash CWM before you do anything else. Get it from the link in my signature and flash it in fastboot. Then boot into CWM, do a wipe, and re-flash the ROM you want.
Click to expand...
Click to collapse
We've been there. Done that and got the T-shirt. The phone is working fine. Just installing CND 1.6

familyguy59 said:
We've been there. Done that and got the T-shirt. The phone is working fine. Just installing CND 1.6
Click to expand...
Click to collapse
No, he hasn't been there, and obviously you didn't understand that.
If he sees the Android lying on his back with the red ! then he has the STOCK recovery flashed, not CWM.

efrant said:
No, he hasn't been there, and obviously you didn't understand that.
If he sees the Android lying on his back with the red ! then he has the STOCK recovery flashed, not CWM.
Click to expand...
Click to collapse
CWM is flashed, it's installing CND (Or has installed) but whatever we do, it's a bootloop. lol) I'm doing everything, with him, whilst he's at work, via TV ^^
I'm seing exactly everything, what is happening, on the computer. I flashed everything myself...

familyguy59 said:
CWM is flashed, it's installing CND (Or has installed) but whatever we do, it's a bootloop. lol) I'm doing everything, with him, whilst he's at work, via TV ^^
I'm seing exactly everything, what is happening, on the computer. I flashed everything myself...
Click to expand...
Click to collapse
Ah, ok! None of that was mentioned in the thread. Had no idea that you were helping him -- I thought you were helping him in this thread.

Need Help with One X. Red traingle on recovery

Hi
Ive got a problem with my one x. Every time i go on to recovery it comes up with an red triangle with an exclamation point in the middle.Also i am using an Insertcoin rom. I can still use the phone to make calls and everything else but i cant access recovery. Any ideas to what i could do to fix this?
I have attached a picture of the problem

Abtean said:
Hi
Ive got a problem with my one x. Every time i go on to recovery it comes up with an red triangle with an exclamation point in the middle.Also i am using an Insertcoin rom. I can still use the phone to make calls and everything else but i cant access recovery. Any ideas to what i could do to fix this?
I have attached a picture of the problem
Click to expand...
Click to collapse
download the latest JB cwm (if you are using JB HBOOT)
Code:
fastboot erase recovery
Code:
fastboot flash recovery recovery.img
(the file downloads must be named recovery.img)

matt95 said:
download the latest JB cwm (if you are using JB HBOOT)
Code:
fastboot erase recovery
Code:
fastboot flash recovery recovery.img
(the file downloads must be named recovery.img)
Click to expand...
Click to collapse
I used the tool and it came up with this.
Edit : I also tried to do it manually by doing what you said but it comes up with this(2nd attachment)

Abtean said:
I used the tool and it came up with this.
Edit : I also tried to do it manually by doing what you said but it comes up with this(2nd attachment)
Click to expand...
Click to collapse
from what i see it flashed the recovery...does it work now?

matt95 said:
from what i see it flashed the recovery...does it work now?
Click to expand...
Click to collapse
Nope its still the same. It says failed on the 9th line down if u check the first picture.

Abtean said:
Nope its still the same. It says failed on the 9th line down if u check the first picture.
Click to expand...
Click to collapse
the tools didn't executed the string
Code:
fastboot erase recovery

matt95 said:
the tools didn't executed the string
Code:
fastboot erase recovery
Click to expand...
Click to collapse
I tried to do that manually if u look at the 2nd picture. It comes up with failed (remote : not allowed)

You need (When 1x is connected to PC and "Fastboot USB" is displayed on 1x:
Code:
fastboot flash recovery recovery.img
recovery.img has to be the correct filename of your recovery, and the file has to be in the same folder where fastboot.exe is.
Then
Code:
fastboot erase cache
LG, Helmut

@Op, as I can see in your post your are still able to use fastboot usb.
Hopefully you still have the correct InsertCoin rom version.zip?
Attached the ADB Tools.zip, extract and place it somewhere you can find on your desktop (C:\Fastboot\ would be fine)
Extract 'InsertCoin rom version.zip' and take boot.img out.
Place the boot.img into C:\Fastboot\boot.img
Download clockworkmodrecovery.img from >> HERE and place it in that folder as well
In the folder I've placed a shortcut to CMD window, klick on it to open.
Now type the following:
Fastboot flash boot boot.img [Enter]
Fastboot flash recovery 'nameofrecovery.img' [Enter]
Fastboot erase cache [Enter]
Hopefully you are now able to come in CWM recovery, good luck!

Laurentius26 said:
@Op, as I can see in your post your are still able to use fastboot usb.
Hopefully you still have the correct InsertCoin rom version.zip?
Attached the ADB Tools.zip, extract and place it somewhere you can find on your desktop (C:\Fastboot\ would be fine)
Extract 'InsertCoin rom version.zip' and take boot.img out.
Place the boot.img into C:\Fastboot\boot.img
Download clockworkmodrecovery.img from >> HERE and place it in that folder as well
In the folder I've placed a shortcut to CMD window, klick on it to open.
Now type the following:
Fastboot flash boot boot.img [Enter]
Fastboot flash recovery 'nameofrecovery.img' [Enter]
Fastboot erase cache [Enter]
Hopefully you are now able to come in CWM recovery, good luck!
Click to expand...
Click to collapse
I tried to flash the boot.img but it came up with FAILED(remote: not allowed).
Ill attach the image of what comes up.

Have you re-locked your boot loader?

peedub said:
Have you re-locked your boot loader?
Click to expand...
Click to collapse
It says Re-locked at the top when im on boot loader.

Abtean said:
It says Re-locked at the top when im on boot loader.
Click to expand...
Click to collapse
You need to unlock your bootloader again then before you can flash recovery/boot

Abtean said:
It says Re-locked at the top when im on boot loader.
Click to expand...
Click to collapse
That's why it says not allowed! To use fastboot commands you need to be unlocked...
Sent from my HTC One X using xda app-developers app

matt95 said:
That's why it says not allowed! To use fastboot commands you need to be unlocked...
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
oh alright. How can i unlock it? and will i lose my data?

Hmm. To have used custom firmware I'm sure you must have done this already.
Anyway. You need to sign up at HTC dev and follow the instructions there. They're quite detailed. After you've done that follow the previous instructions, they were really clear and will work with unlocked boot loader.
http://htcdev.com/bootloader/
--You don't lose data, but if there's anything super important on your external SD it's always best practice to backup.
(after you've installed CWM recvoery, do a backup using that. VERY important)
---forgot to mention: You need to pick "all other supported models" (The one x isn't listed, but it works fine).

OK Thanks for all your help guys. I really appreciate it. Ill post back if something goes wrong and again Thanks

But then how was he able to boot insertcoin when his bootloader is relocked?
Sent from my HTC One X using xda app-developers app

Haha I have no idea. I can only assume that it he relocked it after messing around.
Sent from my HTC One X using xda app-developers app

It could be relocked after he flashed InsertCoin and the rom would still boot.
Only problem he has then is that he can't get into CWM recovery and that's what he's complaining about I think.
XxVcVxX said:
But then how was he able to boot insertcoin when his bootloader is relocked?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse

New Verizon HTC one S-off but can not access recovery

I just got an HTC one from Best Buy Mobile (Verizon) yesterday. Turned S-Off using runrunner. Verified root but can not access recovery. I had the same issue with a S4 but it was a known issue for all that has updated to the 4.3.
I have tried all the suggestions in flashing TWRP. I am wondering if this is a Verizon related issue? Maybe they are putting something on their phones to prevent recovery?
HELP!!!!

Something is really jacked up with my phone. It kept saying Unfortunately Amazon has stopped. Over and over again. So I gave up and went to do a factory restore and data wipe. I first went to Super user and removed permanent root. I then tried to do a factory wipe through settings/backup & reset reset phone. It still gave me issues trying to enter recovery mode. It would get hung up and then reboot to a sort of safe mode version of the OS. (with a red disclaimer at the bottom). Then I tried to do factory reset by holding the volume down and power. Its doing the same thing. At this point I don't are about root I just want a working phone.
Any suggestions?

Flash twrp from the xda thread here and then flash arom. What exactly are you doing to flash it?
Sent from my One using xda app-developers app

I have tried flashing a recovery. Now I dont have root and cant do anything. It will not let me even upgrade firmware. I tried to get it back to stock. My recovery is jacked up.

adodson927 said:
I have tried flashing a recovery. Now I dont have root and cant do anything. It will not let me even upgrade firmware. I tried to get it back to stock. My recovery is jacked up.
Click to expand...
Click to collapse
OK, so you are s-ff, is your bootloader unlocked?
IF you are not on stock recovery YOU CANNOT run an update

I'm s-off bootloader unlocked. I have no recovery. Not even stock.
Sent from my HTC6500LVW using XDA Premium 4 mobile app

adodson927 said:
I'm s-off bootloader unlocked. I have no recovery. Not even stock.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
.. you have to have a recovery..
I think?
can you successfully fastboot flash a custom recovery? If not can you fastboot the stock recovery..?
To be completely honest, I would just run the RUU. should fix you right up

You could boot into RUU and flash the decrypted stock rom zip to get back to straight stock. The zip reflashes stock recovery. I don't see why that wouldn't work.
Edit: Oops. Didn't even notice andy just recommended the same thing lol. My fault.

adodson927 said:
I'm s-off bootloader unlocked. I have no recovery. Not even stock.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thats odd, i thought you had to have a recovery of some kind.
Here is what I would do:
Lets try Flashing CWM instead of TWRP in fastboot I will post it, and I will also post the stock recovery there to as well.
https://www.dropbox.com/s/kk2esdrx1g1b50p/recovery-clockwork-touch-6.0.4.5-m7vzw.img
the image is easily installed via an unlocked bootloader with the following command:
fastboot flash recovery imagename.img
in this case: fastboot flash recovery recovery-clockwork-touch-6.0.4.5-m7vzw.img
See if it actually takes, and report back any errors.
If for some reason it does not, try booting into bootloader/fastboot then push the stock recovery:
https://www.dropbox.com/s/hgzgq84svzahvnv/htconerecovery_signed.img
Hopefully that will at least take and try to push CWM again , reboot bootloader and reboot into recovery . I am hoping that does it for you.
Go here: http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip and dump SU on the root of your SD card and flash the SU.
I have seen people have all kind of weird issues with rum runner and I am just glad i had the official java card method used on mine. I also tend to just use a stock ROM which is just de-bloated.
Anyways I have used Santod040 roms in case i need to go back to pure stock ROM only: http://forum.xda-developers.com/showthread.php?t=2485319
You will need the odex one to run any OTA
The firmware is a different thing to flash.
here are the checksums:
htconerecovery_signed.img
MD5: E3F5208454689BE7F09835D4A60953A8
SHA-1: 1B0734D97732039528159AD1409AFEE858B5E9F1
SHA3-256: E0741EB77E5DEBEA932EE74F374FAC9E1037776178944279E8B12832C30E2546
recovery-clockwork-touch-6.0.4.5-m7vzw.img
MD5: 21A386CB920C485844E3BE0727351838
SHA-1: 312350D7383850915A648E2060AA2FC72B5EA08F
SHA3-256: 78B0C42CD62D3EB2B18BF62B544FC86878A56199DB96D13F26EA65663A822932

Thanks guys!
I was able to install TWRP and also Superuser.
Here are the instructions I used. Maybe they will help someone else like me.
Power off your device, then press and hold Power and Volume Down until you're in the bootloader menu. Highlight FASTBOOT and press Power. You should see Fastboot USB highlighted in red.
Download the latest version of TWRP for your phone and carrier. Rename file to twrp.img.
Open a command prompt on your computer and navigate to your SDK directory. Type "fastboot flash recovery twrp.img" and hit Enter.
Then I backed up my stock rom using TWRP
In TWRP's main menu, tap Reboot. It will tell you that you're not rooted and ask you to install SuperSU, so swipe to confirm. When you reboot your phone, you should see a notification that you need to install the SuperSU app. Open the notification and select TWRP, since the app from Google Play only works with S-OFF.
Worked flawlessly.
I installed NuSenseONE max and I love it so far.

adodson927 said:
Thanks guys!
I was able to install TWRP and also Superuser.
Here are the instructions I used. Maybe they will help someone else like me.
Power off your device, then press and hold Power and Volume Down until you're in the bootloader menu. Highlight FASTBOOT and press Power. You should see Fastboot USB highlighted in red.
Download the latest version of TWRP for your phone and carrier. Rename file to twrp.img.
Open a command prompt on your computer and navigate to your SDK directory. Type "fastboot flash recovery twrp.img" and hit Enter.
Then I backed up my stock rom using TWRP
In TWRP's main menu, tap Reboot. It will tell you that you're not rooted and ask you to install SuperSU, so swipe to confirm. When you reboot your phone, you should see a notification that you need to install the SuperSU app. Open the notification and select TWRP, since the app from Google Play only works with S-OFF.
Worked flawlessly.
I installed NuSenseONE max and I love it so far.
Click to expand...
Click to collapse
how else were you trying to flash a recovery ?!?

Goo.im app as well as ROM Manager, ROM Toolbox can flash recoveries. I've notice there isn't much compatibility with the m7vzw though. You can also use terminal command's from the device. All of these require root access though.
Sent from my One using XDA Premium 4 mobile app

Hey everyone, so my problem is that i did run rumrummer the way it said on the directions and i double checked my rom version type countless times. It says that i am unlocked and s-off, but i cant access recovery. I tried flashing recovery with fastboot command prompt, and still no luck. It gives me a "error: cannot open 'open.img', I navigated to the folder that it is located in and executed the command properly every time. I also dont know how to flash superuser using flashboot, so any help will be very much appreciated. Also I'm kinda new to rooted, I have some experience from a few years back, but dont remember everything.

Jo5ton1018 said:
Hey everyone, so my problem is that i did run rumrummer the way it said on the directions and i double checked my rom version type countless times. It says that i am unlocked and s-off, but i cant access recovery. I tried flashing recovery with fastboot command prompt, and still no luck. It gives me a "error: cannot open 'open.img', I navigated to the folder that it is located in and executed the command properly every time. I also dont know how to flash superuser using flashboot, so any help will be very much appreciated. Also I'm kinda new to rooted, I have some experience from a few years back, but dont remember everything.
Click to expand...
Click to collapse
place the name.img file in the same folder as the adb and fastboot executables, open command prompt as administrator for that directory, then type "fastboot flash recovery name.img" substitute name.img for the actual name of the file including extension and make sure there are no quotes around it. also, use "fastboot devices" or "adb devices" to make sure your phone is being recognized.

I got it to work, finally. Thanks for the reply pointedge. I beat u to it earlier in the day and forgot to post up again that I got it. It was like u said, I just had the file in the wrong folder.
Sent from my HTC6500LVW using XDA Premium 4 mobile app

nrfitchett4 said:
how else were you trying to flash a recovery ?!?
Click to expand...
Click to collapse
I'm willing to bet he flashed the wrong recovery. It's happened to a lot of people.

Soft Bricked Oppo Find 7

Hi everyone. I bought this Find 7 today in hopes that I could get it running. The previous owner apparently went to flash cm11 and he soft bricked it. The phone will power on to the start screen the the screen stays black and goes on and off. I can get to fastboot but not recovery. I have read in the oppo forums that I need to push the stock recovery too it but am unfamiliar with fastboot.. Any input would be greatly appreciated. Thank you.

I got it to boot up following this thread http://forum.xda-developers.com/find-7/help/bricked-7-t2897376. Then I went to wipe it and I'm back where I started. The Msm Downloader is japanese so I don't understand what half of it means. Must have been a fluke it booted up.

I got it to boot up again. I'm not sure what I should do with it next. There is no recovery installed.

If you can get to fastboot, download a recovery, navigate to that recovery, use
fastboot flash recovery x.img
Where x is the name of the file. Hold down power and volume down until phone vibrates, and you should be in recovery

farenteria said:
If you can get to fastboot, download a recovery, navigate to that recovery, use
fastboot flash recovery x.img
Where x is the name of the file. Hold down power and volume down until phone vibrates, and you should be in recovery
Click to expand...
Click to collapse
Thank you for the response. I have been trying to do that. I have the recovery.img downloaded but I can't seem to get it to my phone. I'm not all that familiar with fastboot and adb.

Ethanp said:
Thank you for the response. I have been trying to do that. I have the recovery.img downloaded but I can't seem to get it to my phone. I'm not all that familiar with fastboot and adb.
Click to expand...
Click to collapse
Do you have fastboot and adb installed on your computer?

Yes I do

Ethanp said:
Thank you for the response. I have been trying to do that. I have the recovery.img downloaded but I can't seem to get it to my phone. I'm not all that familiar with fastboot and adb.
Click to expand...
Click to collapse
Which recovery are you trying to install??? OPPO stock recovery or other custom recoveries like TWRP??
By the way, as long as you can get into fastboot, everything is fixable, just a matter of how long it takes

Doomboss said:
Which recovery are you trying to install??? OPPO stock recovery or other custom recoveries like TWRP??
Click to expand...
Click to collapse
I was trying to install the Oppo stock recovery.img

Ethanp said:
I was trying to install the Oppo stock recovery.img
Click to expand...
Click to collapse
Ok, can you try to download the latest TWRP and see if you can install it with fastboot??

Doomboss said:
Ok, can you try to download the latest TWRP and see if you can install it with fastboot??
Click to expand...
Click to collapse
I just tried it and it says it cannot load

Ethanp said:
I just tried it and it says it cannot load
Click to expand...
Click to collapse
Hmm it looks like you put the .img file in the wrong path. Can you show me the command you entered and the name of the TWRP recovery image you downloaded?

Doomboss said:
Hmm it looks like you put the .img file in the wrong path. Can you show me the command you entered and the name of the TWRP recovery image you downloaded?
Click to expand...
Click to collapse
I'm not sure where the .img file should go. Do you have teamviewer?

Ethanp said:
I'm not sure where the .img file should go. Do you have teamviewer?
Click to expand...
Click to collapse
Yes I do. But I don't have time until 1 and half hour later
You can place the .img file anywhere you want, but you just have to specify the path and name of the recovery image on the fastboot flash command. For example: fastboot flash recovery C:\openrecovery-twrp-2.8.0.1-find7.img (this is if you put the recovery image in the root directory of C drive)

Doomboss said:
Yes I do. But I don't have time until 1 and half hour later
You can place the .img file anywhere you want, but you just have to specify the path and name of the recovery image on the fastboot flash command. For example: fastboot flash recovery C:\openrecovery-twrp-2.8.0.1-find7.img (this is if you put the recovery image in the root directory of C drive)
Click to expand...
Click to collapse
Ok I just got this message. Failed <remote: Device not unlocked cannot flash or erase. The phone is plugged in and in fastboot?

Ethanp said:
Ok I just got this message. Failed <remote: Device not unlocked cannot flash or erase. The phone is plugged in and in fastboot?
Click to expand...
Click to collapse
Try: fastboot oem unlock
I don't know if this will works directly since you probably don't have the OPPO driver and i'm not sure if you need it. By the way this method will wipe everything on the phone but i assume you don't have anything on the phone yet anyway :silly:

Doomboss said:
Try: fastboot oem unlock
I don't know if this will works directly since you probably don't have the OPPO driver and i'm not sure if you need it. By the way this method will wipe everything on the phone but i assume you don't have anything on the phone yet anyway :silly:
Click to expand...
Click to collapse
Ok fastboot oem unlock worked. The phone wiped and booted.

Ethanp said:
Ok fastboot oem unlock worked. The phone wiped and booted.
Click to expand...
Click to collapse
Did you also install the TWRP recovery? (By the way, you don't need the stock OPPO recovery since the newest TWRP can also flash ColorOS)

Doomboss said:
Did you also install the TWRP recovery? (By the way, you don't need the stock OPPO recovery since the newest TWRP can also flash ColorOS)
Click to expand...
Click to collapse
Yes I just successfully flashed twrp. Thank you very much for your help!

Ethanp said:
Yes I just successfully flashed twrp. Thank you very much for your help!
Click to expand...
Click to collapse
You're welcome Have fun with your Find 7!

[Q] {Q} Xperia S hard break

Hi,
I've really big problem and i hope that here i get sugestion...
1, I try flash new ROM to my phone. I copy ROM to "SD card" but in wrong version.
After this I into Flashtool get new Kernel and new ver. of TWRecovery. Then I go to recovery and start flashing as every time before...
2, But now I'm in bad sittuation. I can only get into recovery... When i want to go to bootloger, i can't. Every time when I go to bootloger from recovery, i'm back in recovery. Every time is phone reaction the same as I hold power up button+vol. up. And I'm only in recovery.
When I want transfer some ROM to phone, I can't. Cose when I Mount USB massstorage I see phone as "Elementary sys device". I have install ABD device drivers...
Changelog I can't get you, cose it's in "SD card"...
3, Please, Show me "the way" out of this sh*t... I use HTC HD2 few years, all time flashing. Now I use Xperia S for 3 yr. All time flashing. But now I'm in a wrong way ind can't get my phone to standby
Thank you for answers!

magntwo said:
Hi,
I've really big problem and i hope that here i get sugestion...
1, I try flash new ROM to my phone. I copy ROM to "SD card" but in wrong version.
After this I into Flashtool get new Kernel and new ver. of TWRecovery. Then I go to recovery and start flashing as every time before...
2, But now I'm in bad sittuation. I can only get into recovery... When i want to go to bootloger, i can't. Every time when I go to bootloger from recovery, i'm back in recovery. Every time is phone reaction the same as I hold power up button+vol. up. And I'm only in recovery.
When I want transfer some ROM to phone, I can't. Cose when I Mount USB massstorage I see phone as "Elementary sys device". I have install ABD device drivers...
Changelog I can't get you, cose it's in "SD card"...
3, Please, Show me "the way" out of this sh*t... I use HTC HD2 few years, all time flashing. Now I use Xperia S for 3 yr. All time flashing. But now I'm in a wrong way ind can't get my phone to standby
Thank you for answers!
Click to expand...
Click to collapse
Boot phone into recovery, then run following command to copy the ROM to phone memory.
Code:
adb push /path/to/ROM.zip /sdcard/
Then flash the ROM via recovery!

Mirhawk said:
Boot phone into recovery, then run following command to copy the ROM to phone memory.
Code:
adb push /path/to/ROM.zip /sdcard/
Then flash the ROM via recovery!
Click to expand...
Click to collapse
You mean into terminal command? I need to get phone into fasboot. then I can do what I want.. Now it's dead phone... It was happend when I want to flash yours ROM. But i miss one step, flash boot.img

magntwo said:
You mean into terminal command? I need to get phone into fasboot. then I can do what I want.. Now it's dead phone... It was happend when I want to flash yours ROM. But i miss one step, flash boot.img
Click to expand...
Click to collapse
Recovery is TWRP. The one with menu of install, wipe and all. You need to boot into that and use the adb on PC.

Mirhawk said:
Recovery is TWRP. The one with menu of install, wipe and all. You need to boot into that and use the adb on PC.
Click to expand...
Click to collapse
Yes, I'm in TWRP, exactly v.2.8.0.1, from topic of your ROM. Bud now I can't connect phone via ABD drivers. I try it via apps and two ways via Commans window.
I'm only in TWRP. I can't get to fastboot, I can't install ROM now, phone reaction is the same as I hold power up+vol up button.
I need one of two ways... 1,get phone connected with PC via fastboot to flash new kernel, boot.img and at least your ROM
2,get phone connected with PC via mass storage, to get some old ROM, flash it and get to fastboot...
For example:

magntwo said:
Yes, I'm in TWRP, exactly v.2.8.0.1, from topic of your ROM. Bud now I can't connect phone via ABD drivers. I try it via apps and two ways via Commans window.
I'm only in TWRP. I can't get to fastboot, I can't install ROM now, phone reaction is the same as I hold power up+vol up button.
I need one of two ways... 1,get phone connected with PC via fastboot to flash new kernel, boot.img and at least your ROM
2,get phone connected with PC via mass storage, to get some old ROM, flash it and get to fastboot...
For example:
Click to expand...
Click to collapse
You cannot use fastboot command in recovery, You can use the adb commands only. Did Yo try pushing the ROM to phone?

Mirhawk said:
You cannot use fastboot command in recovery, You can use the adb commands only. Did Yo try pushing the ROM to phone?
Click to expand...
Click to collapse
Yes, I was... I have in "sd card" save my last ROM+gapps. As I wrote, two ways when I try it. One is Fail of flash by TWRP, second fall of TWRP during flash.
Ty for "want to help"!

magntwo said:
Yes, I was... I have in "sd card" save my last ROM+gapps. As I wrote, two ways when I try it. One is Fail of flash by TWRP, second fall of TWRP during flash.
Ty for "want to help"!
Click to expand...
Click to collapse
Ah apologies, got lost while replying.
Anyways, lets start from basic. Can You try un-installing and installing the fastboot drivers? Because I suspect that's why You are not able to enter into fastboot mode.

Mirhawk said:
Ah apologies, got lost while replying.
Anyways, lets start from basic. Can You try un-installing and installing the fastboot drivers? Because I suspect that's why You are not able to enter into fastboot mode.
Click to expand...
Click to collapse
I try it, but no way.. The same.

magntwo said:
I try it, but no way.. The same.
Click to expand...
Click to collapse
Can You try using a different PC/Laptop?

Mirhawk said:
Can You try using a different PC/Laptop?
Click to expand...
Click to collapse
I tryed my Vaio laptom and Dell laptom from my work. Both wrong... I'm completlly helplessly in this moment.

magntwo said:
I tryed my Vaio laptom and Dell laptom from my work. Both wrong... I'm completlly helplessly in this moment.
Click to expand...
Click to collapse
Just a sec, what combination do You use to go into bootloader? Power up+volume up? That is not what Yo do, You disconnect the phone from cable, and then turn off the phone. Then just press volume up, and connect the phone. No other button is needed to be pressed.

Mirhawk said:
Just a sec, what combination do You use to go into bootloader? Power up+volume up? That is not what Yo do, You disconnect the phone from cable, and then turn off the phone. Then just press volume up, and connect the phone. No other button is needed to be pressed.
Click to expand...
Click to collapse
Thank you. This is the way.. Now I'm in fastboot.... I gona flash kernel 2.8.0.1, then boot.img from your ROM and finally the ROM

magntwo said:
Thank you. This is the way.. Now I'm in fastboot.... I gona flash kernel 2.8.0.1, then boot.img from your ROM and finally the ROM
Click to expand...
Click to collapse
Finally! Follow the procedure here to flash a Kitkat/Lollipop ROM.

Mirhawk said:
Finally! Follow the procedure here to flash a Kitkat/Lollipop ROM.
Click to expand...
Click to collapse
Re: one more...
Quote:
Originally Posted by magntwo
Sorry, again...
As I wrote, I have in this moment folder with everything, nAOSP 5.0 b12, gapps-lp-20141109-signed, boot-carbon_3-11-14, beta SU v2.44, kernel v2.
As you know, two things, get this folder to phone and get fastboot, in this moment i'll be there, where I want to be
Ty!
Hi, can You please post it in a thread and tag Me? The messages kinda confuse Me!
.
Click to expand...
Click to collapse
Here we're... Thank you.

magntwo said:
Here we're... Thank you.
Click to expand...
Click to collapse
Apologies, might have missed out Your quote earlier. So You now have ROM and other stuff in the phone. What problem are You facing Now? Also I would recommend the new released version b14c with kernel from b14d of nAOSP.

Mirhawk said:
Apologies, might have missed out Your quote earlier. So You now have ROM and other stuff in the phone. What problem are You facing Now? Also I would recommend the new released version b14c with kernel from b14d of nAOSP.
Click to expand...
Click to collapse
simply... I get to bootloader as we wrote last. Then I flash kernel, and phone died. Now I can only charge or see a Sony logo. I can ONLY this now. no buttons helps, no different cable/slot/PC helps... I'M only in charging mod, after turn on only logo see. no TWRP, no bootloger.

magntwo said:
simply... I get to bootloader as we wrote last. Then I flash kernel, and phone died. Now I can only charge or see a Sony logo. I can ONLY this now. no buttons helps, no different cable/slot/PC helps... I'M only in charging mod, after turn on only logo see. no TWRP, no bootloger.
Click to expand...
Click to collapse
So You can't even go into bootloader now? That's weird and also makes this a bit complicated! Because You need to be able to go into bootloader mode to flash a new kernel which has recovery. Hope You are pressing only volume while connecting phone to PC. Drivers are fine as You were able to flash a kernel earlier. Which Kernel did You flash first? If You are able to go into bootloader, then flash this kernel via fastboot mode.

Mirhawk said:
So You can't even go into bootloader now? That's weird and also makes this a bit complicated! Because You need to be able to go into bootloader mode to flash a new kernel which has recovery. Hope You are pressing only volume while connecting phone to PC. Drivers are fine as You were able to flash a kernel earlier. Which Kernel did You flash first? If You are able to go into bootloader, then flash this kernel via fastboot mode.
Click to expand...
Click to collapse
Ok, I flash it. But I really can't into bootloader. If I hold vol button, conn cable only red, charging light... Now I really don't know what else.

magntwo said:
Ok, I flash it. But I really can't into bootloader. If I hold vol button, conn cable only red, charging light... Now I really don't know what else.
Click to expand...
Click to collapse
So You were able to flash the kernel I gave? Then You should be able to boot into CWM recovery. The Kernel logo will be of a Android bot.