Related
Anyone knows how to install busybox?
I've tried to follow some guides but ends up with:
Code:
215:Desktop ricardo$ adb push busybox /data/local
580 KB/s (1083568 bytes in 1.823s)
215:Desktop ricardo$ adb shell
$ su
# cd /system/xbin
# mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
# cat /data/local/busybox > busybox
cannot create busybox: not enough memory
or
$ su
# cd /data/local
# mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
# dd if=/data/local/busybox of=/system/xbin/busybox
/system/xbin/busybox: cannot open for write: Out of memory
or
$ su
# cd /data/local
# mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
# ./busybox cp /data/local/busybox /system/xbin
cp: can't create '/system/xbin/busybox': Cannot allocate memory
same here. cannot write to rw-mounted /system.
sucks
Try my zip file. Woked for me
The only thing that I want to change and I can't is the init.rc file. I tried to mount the / (rootfs) with rw, but every time I restart my device the file is copied, again, from the ramdisk image.
I have the same problem
ricardoft said:
Try my zip file. Woked for me
The only thing that I want to change and I can't is the init.rc file. I tried to mount the / (rootfs) with rw, but every time I restart my device the file is copied, again, from the ramdisk image.
Click to expand...
Click to collapse
What should I do with your files?
Nobody has a solution to this?
I don't think this is a memory issue though, .. added 512mb swap and still it claimed to be out of memory, ..
also I figured maybe hd space .. however when i ln /data/local/tmp/busybox to /system/xbin it had the same error.
I both tried ln from the system and ln from busybox both had same result.
It's not a memory problem! In order to install it you have to be in recovery mode.
Try:
While in recovery mode use adb to connect to our phone. Now transfer the zip file (busybox.zip) to your phone and install it via clockwork recovery -> install zip file -> select my zip file.
can anyone post the proper busybox file cause for some reason the file signature verification failed.
adb push busybox-signed.zip /sdcard/busybox-signed.zip
rebooted phone held down volume button while booting ..
choose recovery, ..
choose install zip from sdcard..
then i see a lot of no and one yes .. so i choose yes but the installation is aborted.
Just install titanium backup and click on 'problems?' at the bottom. It will install BusyBox for you.
it has error during installation at line 4 with your busybox.zip
somethinf like can not chmod
(rooted buzz with stock rom)
Elibongo said:
Just install titanium backup and click on 'problems?' at the bottom. It will install BusyBox for you.
Click to expand...
Click to collapse
Do what this guy said.
titanium install in /sdcard busybox, not in /system/bin (xbin) , so it is not usuable by other apps
i have installed it in during recovery mode in /system/xbin
how now to specify PATH for using commands from it?
kevin2516 said:
Do what this guy said.
Click to expand...
Click to collapse
you have read my mind especially since that isn't free software.
hellysmile said:
i have installed it in during recovery mode in /system/xbin
how now to specify PATH for using commands from it?
Click to expand...
Click to collapse
i think you need to create aliases however why install it in xbin anyways then, .. if you need to create aliases or links in bin.. ?
example
$ ln -s /data/local/tmp/busybox ls
$ ./ls
if it is in a path that is included in PATH executing a command will auto look for it in all directories defined in PATH env so basicly you could just create all the directories under /data/local/tmp/bin
and just then append that to PATH env echo $PATH then append :/data/local/tmp/bin to it and busybox should work as well.
Ofloo said:
you have read my mind especially since that isn't free software.
Click to expand...
Click to collapse
titanium backup is free software... look on the market, there's a free version and a donate version.
i have aliases in /system/xbin
they was created after busybox --instal -s
but in system allready exists some commands like ls => i want to use ls from busbox, not from system
and terminal emulator dont anderstand ^[ likes bindings
is there a definitive way to do this. There seems to be no clear way of doing it.
matpol said:
is there a definitive way to do this. There seems to be no clear way of doing it.
Click to expand...
Click to collapse
Maybe this helps:
fang0654 said:
To install:
1) extract and push busybox to your sdcard, reboot into recovery
2) mount /system
3) if you don't have /system/xbin (you should), create it
adb shell:
# mkdir /system/xbin (if necessary)
dd if=/sdcard/busybox of=/system/xbin/busybox
cd /system/xbin
chmod 755 busybox
./busybox --install .
4) reboot and done
OPTIONAL - before rebooting replace the busybox installed by the root process in /system/bin
1) mv /system/bin/busybox /system/bin/busybox.bak
2) cp /system/xbin/busybox /system/bin/busybox
Click to expand...
Click to collapse
from this site: http://forum.xda-developers.com/showthread.php?t=702634
The above is pretty straightforward. The only thing is you need to download the zip in the other thread and 'busybox' refers to the binary in the zip rather than the whole directory - as I understand it. Correct me if I am wrong but trying the dd command on the dir will not work.
matpol said:
The above is pretty straightforward. The only thing is you need to download the zip in the other thread and 'busybox' refers to the binary in the zip rather than the whole directory - as I understand it. Correct me if I am wrong but trying the dd command on the dir will not work.
Click to expand...
Click to collapse
You dont have to extract the binary into a folder, just extract the busybox file direct on your sdcard. Than the dd command should work, on my phone it works fine.
But if not, does the command cat in the adb shell work?
If so, try istead of the dd comand:
Code:
mount /sdcard
cat /sdcard/busybox > /system/xbin/busybox
And remember to start your wildfire in the recovery mode, that was the mistake I had done...
Having dropped my desire and cracked the screen I would like to perform a factory wipe via ADB before I take it in for repair (I've backed it up).
I have the clockwork recovery which doesn't have the su/format commands and I am unable to find information on the other functions.
Any tips?
Many thanks!
Clockwork recovery offers all wipe and factory reset functions. 2.5.0.7, unless I'm missing something
He has no screen man, so gui is Wortes
Anyway, try this
Code:
adb shell
#wipe data
just a question, can you go from rooted desire with custom rom to stock by just wiping everyting in clockwork recovery?
I thought you needed to run a RUU update to put everything back to stock?
swimon said:
I thought you needed to run a RUU update to put everything back to stock?
Click to expand...
Click to collapse
That's right. But even if wipe all is not back to stock, it's better than leaving a rooted rom if you want to give it for repair i think.
try;
adb shell
wipe all
you need to add ./ to the start of adb if using a mac or linux
./adb shell
wipe all
Thanks for all the help guys!
I tried the *wipe* command, but I didn't have superuser mode set up.
To get into superuser, which was denied repeatedly I read that a popup usually shows on the phone requesting access. I think I managed to click that by tapping the screen on the left where "yes/accept" usually shows.
When I tried with superuser:
Code:
adb shell
su
wipe system
I got an long list of files that it was unable to delete.
At this point, I needed to leave and thought maybe the phone needed charging or something.
Coming back to it now, the phone is not recognised by ADB.
I've done a lot of searching and I think I must have unchecked the "usb debugging" from the notifications menu somehow.
So I have a new problem...
q) Is it possible to enable usb debugging with a cracked screen or otherwise get into the phone?
I connect the phone and just get android disk device/usb disk drive in windows manager.
I can reboot the phone into bootloader (with volume down held) and when I connect the phone I get bootloader interface appearing instead of disk drive but I just don't know where to go from there.
All I want is to clean the phone before I send it in for repair!
If anyone is able to help, I greatly appreciate it, if not thanks for your time.
In recovery you have full adb acces and can do all!
I would say, you try to make a nandroid backup and than flash the ruu
You take out your sd card and send than the device to them.
They wont to a forensic dataanalys, and most of the personal stuff is on the sd ;-)
Ps.: as far as i know you can flash ruus over fastboot(needs s-off)
And when you get your phone back, you root it and restore the last backup!
Pps.: if you haven't done a backup in the closer past you can sync, with htc sync with your pc! So you have atleast your contacts
Edit: when everything fails just keep the sd :-( they should be professional enough to keep your privacy! And i dont think your emails, sms and contacts are that different from all others :-D
Ah thanks, I thought I might be able to do that as I was mulling it over this morning. When I get home I'll give it a try and see if I succeed. I'll let you know how it goes!
Thanks for the tips and the advice on the nandroid backup - I do have a backup already - I did it when I cracked the screen as a pre-emptive, because at first I could see everything and I assumed it was just a crack but overnight the screen blacked out totally.
Ok, it's in recovery mode but doesn't seem to recognise wipe command. I added a directory listing of /sbin
Code:
C:\Program Files\Android\android-sdk\platform-tools>adb devices
List of devices attached
HT0XWPLXXXXX recovery
C:\Program Files\Android\android-sdk\platform-tools>adb shell
~ # wipe data
wipe data
/sbin/sh: wipe: not found
~ # wipe all
wipe all
/sbin/sh: wipe: not found
~ # wipe
wipe
/sbin/sh: wipe: not found
~ # ls
ls
cache etc res sdcard
data init root sys
default.prop init.rc sbin system
dev proc sd-ext tmp
~ # cd sbin
cd sbin
/sbin # ls
ls
[ erase_image mkswap sort
[[ expr mktemp split
adbd false mkyaffs2image stat
amend fdisk modprobe strings
ash fgrep more stty
awk find mount swapoff
basename flash_image mountpoint swapon
bbconfig fold mv sync
bunzip2 free nandroid sysctl
busybox freeramdisk nandroid-md5.sh tac
bzcat fuser nice tail
bzip2 getopt nohup tar
cal grep od tee
cat gunzip patch test
catv gzip pgrep time
chgrp head pidof top
chmod hexdump pkill touch
chown id printenv tr
chroot insmod printf true
cksum install ps tty
clear kill pwd tune2fs
cmp killall rdev umount
cp killall5 readlink uname
cpio killrecovery.sh realpath uniq
cut length reboot unix2dos
date less recovery unlzop
dc ln renice unyaffs
dd losetup reset unzip
depmod ls rm uptime
devmem lsmod rmdir usleep
df lspci rmmod uudecode
diff lsusb run-parts uuencode
dirname lzop sed watch
dmesg lzopcat seq wc
dos2unix md5sum setsid which
du mkdir sh whoami
dump_image mke2fs sha1sum xargs
echo mkfifo sha256sum yes
egrep mkfs.ext2 sha512sum zcat
env mknod sleep
/sbin #
su rm -rf *
Does that work? :/
Yep, that's done the trick. Thanks.
try a straight
adb shell wipe all
all on one line sometimes the shell boots incorrectly
This guide was tested on my samsung galaxy [email protected] gt-B5330 and it worked.
WARNING: this can brick your phone, used on your own risk (both eyes wide open).
The idea behing can be ported on any phone that allows you to upload custom firmware (most samsungs with odin).
The idea is that you escalate to superuser by setting suid on /system/bin/toolbox executable.
By duing that you can run most of the unix commands on android as a superuser.
I is enought for you to copy su utility somewhere where there is not a nosuid option on mountpoint. and make it a suided executable then execute su and get the #.
It's all down hill from here.
I cannot verify for every ics rom out there, but it seems that now ics uses ext4 filesystem for the system partition.
I have made a script that inspects a stock rom firmware isolate the permissions for the toolbox executable and add to them SUID,SUIG.
After that it pachs the firmware back and you can flash it to your device and have a easylly rootable device. (I will post the stept to take to get a standard rooted device).
What you need:
a linux/gnu (it will not work with cygwin because we have to mount the ext4 partition).
simg2img utility (you can get it from xda site it is in ext4_utility packet).
su, busybox and superuser.apk binaries for android (you can take them from a rooting package).
heimdal (for linux) xor odin (for windows and if you cannot flash the firmware on your phone form linux).
I've put all untilities that are not standard into the tar.
just unpack and you have the universal-patch.sh to run over an .tar.md5 firware stock rom.
And post-firmwareUpdate.sh to run after you flash in order to make the root a standard android root.
This was not tested on any other phone (was tested only on GT-B5330) and do it on your own risk.
This rooting does not exploit any weakness (or flaw) in kernel or any thing, it just modifies the stock firmware to make it more flexible so it should be forward compatible with any version of android after ics.
I assume this would exclude HTC's since you meed to be s-off to flash a firmware. I would probably verify that and edit the title if necessary. Other than that, this looks like it could be helpful.
Help to understand the procedure
Hi ETTT,
first of all thanks for your job and effort in finding a solution to this issue.. it has been driving me crazy till now.. but thanx to you i see the light :good: I see it but i cannot really understand the procedure.. Could you please write a step by step explanation of what i need to do. (I am not what we could call a genius with linux).
Thanks in advance.
The First said:
Hi ETTT,
first of all thanks for your job and effort in finding a solution to this issue.. it has been driving me crazy till now.. but thanx to you i see the light :good: I see it but i cannot really understand the procedure.. Could you please write a step by step explanation of what i need to do. (I am not what we could call a genius with linux).
Thanks in advance.
Click to expand...
Click to collapse
If you are refering to the procedure that the script is doing here is the version of step by step (with-out the script):
http://forum.xda-developers.com/showthread.php?t=1956653
If you want to know the step by step with the script, here (I will not respond to more basic than this, like how to boot ubuntu and stuff.):
mkdir -p /tmp/foo
sudo mkdir /mnt
cd /tmp/foo
tar -xzf universal-patch.tar.gz
export PATH=./:$PATH
{get the firmware here and unzip it, it should have a file with .tar.md5 suffix}
./universal-patch.sh {the name of the firmware including the .tar.md5 suffix}
wait a while. you should have by the way about 10 times the size of the zip as free space.
if all goes well you will have a myfrm.tar.md5 rady for flashing.
flash the firmware, and after boot enable usb debuging, hook the phone to pc
sudo adb devices
./post-firmwareUpdate.sh
you should have a rooted phone.
you cannot go any more basic than that.
Have fun.
Thanks for your effort, I'm already have my XWALH3 patched, btw you should to check the patch on line 19, you've misstype something there
Sent from my GT-B5330 using xda app-developers app
The file after qa
phyxar said:
Thanks for your effort, I'm already have my XWALH3 patched, btw you should to check the patch on line 19, you've misstype something there
Sent from my GT-B5330 using xda app-developers app
Click to expand...
Click to collapse
Thanks for testing and input.
phyxar said:
Thanks for your effort, I'm already have my XWALH3 patched, btw you should to check the patch on line 19, you've misstype something there
Sent from my GT-B5330 using xda app-developers app
Click to expand...
Click to collapse
XWALH3 i've produce from your universal-patch cannot being flashed to my phone, odin crash each time open those files
phyxar said:
XWALH3 i've produce from your universal-patch cannot being flashed to my phone, odin crash each time open those files
Click to expand...
Click to collapse
I'm puting the xdelta to the XWALH3
here are the md5s for the original and patched firmware.
cfe3ca545c4a2c8d453e02cd549655a1 B5330XWALH3_B5330OJVALH1_B5330XXLH4_HOME.tar.md5
624f63943bff54941e4042a39d7928f2 myfrm.tar.md5
Now I have some question in order to debug:
does the patching you have done yeild the same file as I have here?
have you use the same imput? (that's why I've give you the md5 of my imput).
Hey you have rooted you b5330 then do you notice any performance upgrade
Sent from my GT-B5330 using xda premium
Can I patch the firmware using windows??
Because I'm on win
I don't really understand using linux
Or can you make single click batch file that I can use it to patch my firmware???
I really appreciate it if someone provide it
Thanks
Sent from my GT-B5330 using xda app-developers app
byboyz said:
Can I patch the firmware using windows??
Because I'm on win
I don't really understand using linux
Or can you make single click batch file that I can use it to patch my firmware???
I really appreciate it if someone provide it
Thanks
Sent from my GT-B5330 using xda app-developers app
Click to expand...
Click to collapse
I don't know windows that much to make a batch clone of the script. so you need linux.
But you can use a live cd (maybe from ubuntu) to run the script.
ETTT said:
I don't know windows that much to make a batch clone of the script. so you need linux.
But you can use a live cd (maybe from ubuntu) to run the script.
Click to expand...
Click to collapse
Thx for ur reply
How can I open XWALH3.patch that u give earlier??
Bcause I don't know anything about linux
Sent from my GT-B5330 using xda app-developers app
byboyz said:
Thx for ur reply
How can I open XWALH3.patch that u give earlier??
Bcause I don't know anything about linux
Sent from my GT-B5330 using xda app-developers app
Click to expand...
Click to collapse
that patch is an xdelta patch.
There is an xdelta application on windows, don't know if it works, but it should work.
ETTT said:
If you are refering to the procedure that the script is doing here is the version of step by step (with-out the script):
http://forum.xda-developers.com/showthread.php?t=1956653
If you want to know the step by step with the script, here (I will not respond to more basic than this, like how to boot ubuntu and stuff.):
mkdir -p /tmp/foo
sudo mkdir /mnt
cd /tmp/foo
tar -xzf universal-patch.tar.gz
export PATH=./:$PATH
{get the firmware here and unzip it, it should have a file with .tar.md5 suffix}
./universal-patch.sh {the name of the firmware including the .tar.md5 suffix}
wait a while. you should have by the way about 10 times the size of the zip as free space.
if all goes well you will have a myfrm.tar.md5 rady for flashing.
flash the firmware, and after boot enable usb debuging, hook the phone to pc
sudo adb devices
./post-firmwareUpdate.sh
you should have a rooted phone.
you cannot go any more basic than that.
Have fun.
Click to expand...
Click to collapse
hi there, I'm stuck at last point/step: ./post-firmwareUpdate.sh
my terminal respond many error about busybox
the code like this:
2684 KB/s (91980 bytes in 0.033s)
4016 KB/s (996704 bytes in 0.242s)
4491 KB/s (1085140 bytes in 0.235s)
.//busybox: 1: .//busybox: Syntax error: word unexpected (expecting ")")
.//busybox: 1: .//busybox: Syntax error: word unexpected (expecting ")")
dd if=/data/local/tmp/su of=/mnt/obb/su # copy the su binary to a place that can be sudoed
chown 0.0 /mnt/obb/su # modify the owner
chmod 6755 /mnt/obb/su # set SUID flag.
/mnt/obb/su # becomes root !!
mount -o remount,rw /system # remount the system partition as readwrite.
dd if=/data/local/tmp/su of=/system/xbin/su #copy su in path
chown 0.0 /system/xbin/su
chmod 6755 /system/xbin/su
chmod 755 /system/bin/toolbox # close the security hole (toolbox is nolonger with SUID)
dd if=/data/local/tmp/Superuser.apk of=/system/app/Superuser.apk # copy the superuser application
chown 0.0 /system/app/Superuser.apk
chmod 666 /system/app/Superuser.apk
#now this is done for busybox
dd if=/data/local/tmp/busybox of=/system/xbin/busybox
chown 0.0 /system/xbin/busybox
chmod 755 /system/xbin/busybox
cd /system/xbin
for k in
nt/obb/su # copy the su binary to a place that can be sudoed <
/mnt/obb/su: cannot open for write: Permission denied
1|[email protected]:/ $ chown 0.0 /mnt/obb/su # modify the owner
Unable to chmod /mnt/obb/su: No such file or directory
10|[email protected]:/ $ chmod 6755 /mnt/obb/su # set SUID flag.
Unable to chmod /mnt/obb/su: No such file or directory
10|[email protected]:/ $ /mnt/obb/su # becomes root !!
/system/bin/sh: /mnt/obb/su: not found
# remount the system partition as readwrite. <
mount: Operation not permitted
/system/xbin/su #copy su in path <
/system/xbin/su: cannot open for write: Read-only file system
1|[email protected]:/ $ chown 0.0 /system/xbin/su
Unable to chmod /system/xbin/su: No such file or directory
10|[email protected]:/ $ chmod 6755 /system/xbin/su
Unable to chmod /system/xbin/su: No such file or directory
# close the security hole (toolbox is nolonger with SUID) <
Unable to chmod /system/bin/toolbox: Read-only file system
er.apk of=/system/app/Superuser.apk # copy the superuser application <
/system/app/Superuser.apk: cannot open for write: Read-only file system
1|[email protected]:/ $ chown 0.0 /system/app/Superuser.apk
Unable to chmod /system/app/Superuser.apk: No such file or directory
10|[email protected]:/ $ chmod 666 /system/app/Superuser.apk
Unable to chmod /system/app/Superuser.apk: No such file or directory
10|[email protected]:/ $ #now this is done for busybox
10|[email protected]:/ $ dd if=/data/local/tmp/busybox of=/system/xbin/busybox
/system/xbin/busybox: cannot open for write: Read-only file system
1|[email protected]:/ $ chown 0.0 /system/xbin/busybox
Unable to chmod /system/xbin/busybox: No such file or directory
10|[email protected]:/ $ chmod 755 /system/xbin/busybox
Unable to chmod /system/xbin/busybox: No such file or directory
10|[email protected]:/ $ cd /system/xbin
[email protected]:/system/xbin $ for k in
Click to expand...
Click to collapse
smhybrid said:
hi there, I'm stuck at last point/step: ./post-firmwareUpdate.sh
my terminal respond many error about busybox
the code like this:
Click to expand...
Click to collapse
Ok it seams busybox has a thing against ")" in comments.
Here is the script without comments, so try this.
ETTT said:
Ok it seams busybox has a thing against ")" in comments.
Here is the script without comments, so try this.
Click to expand...
Click to collapse
no good, it's still have same error...
maybe the problem is in busybox?
and i don't know why I'm unable to do chmod
smhybrid said:
no good, it's still have same error...
maybe the problem is in busybox?
and i don't know why I'm unable to do chmod
Click to expand...
Click to collapse
give this command:
adb shell ls -l /system/bin/toolbox
and let's see if the toolbox has suid.
ETTT said:
give this command:
adb shell ls -l /system/bin/toolbox
and let's see if the toolbox has suid.
Click to expand...
Click to collapse
what i get is
-rwxr-xr-x root shell 99068 2012-08-09 11:59 toolbox
how to get suid?
smhybrid said:
what i get is
-rwxr-xr-x root shell 99068 2012-08-09 11:59 toolbox
how to get suid?
Click to expand...
Click to collapse
have you flash the patched firmware?
ETTT said:
have you flash the patched firmware?
Click to expand...
Click to collapse
well, I've just do all of Your step, except this:
flash the firmware, and after boot enable usb debuging, hook the phone to pc
Click to expand...
Click to collapse
because I don't know the meaning of flash the firmware. How to do that?
So I skip that and hook the phone to pc with usb debugging enabled
i'm new at linux, but I want to try this method for my galaxy chat
Hi, Please help guys! I'm trying to revert my Fire TV to send it in for an RMA (wifi issues). I'm on latest prerooted custom (51.1.5.0 515030720) and have boot menu installed. I'm following this guide http://www.aftvnews.com/how-to-revert-an-amazon-fire-tv-back-to-stock-recovery-and-stock-software/ to revert back to stock and get rid of boot menu by flashing stock software/recovery I followed everything on the guide but when I rebooted it said something about system update not successful? Here is what I have from my terminal window:
MBP:adb mzaur$ adb push recovery.img /sdcard/
MBP:adb mzaur$ adb push recovery.img /sdcard/
1443 KB/s (8726528 bytes in 5.902s)
MBP:adb mzaur$ adb shell
[email protected]:/ $ su
[email protected]:/ # chmod 777 /cache
[email protected]:/ # chmod 777 /cache/recovery
[email protected]:/ # cd /cache/recovery
/cache/update.zip > command <
mg of=/dev/block/platform/msm_sdcc.1/by-name/recovery <
17044+0 records in
17044+0 records out
8726528 bytes transferred in 1.508 secs (5786822 bytes/sec)
[email protected]:/cache/recovery # exit
[email protected]:/ $ exit
MBP:adb mzaur$ adb push update.zip /cache/
1446 KB/s (477995174 bytes in 322.765s)
MBP:adb mzaur$ adb reboot recovery
Click to expand...
Click to collapse
The stock recovery is from here http://www.aftvnews.com/software/ (51.1.3.0) and the stock software is 51.1.5.0_user_515030720. I also tried stock software 51.1.5.0_user_515020820
The exact error is: The system update was not successful. your Amazon Fire TV will restart in a few minutes and should resume normal operation.
Thanks!
I got it! For anyone else here's what I did.
Flash custom prerooted 51.1.4.0 over whatever you have now. This will wipe out the boot menu. Then try to follow that guide again and install stock software 51.1.1.0 and recovery 51.1.0. For some reason this didn't work (the recovery part). But I used FTV Utility app to flash stock recovery and then everything else worked fine
Hello,
I'm trying to install TWRP on my LG D722, but I get the following error in adb shell
Code:
[email protected]:/ $ su
[email protected]:/ # dd if=/sdcard/twrp-jagnm.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery <
dd: /sdcard/twrp-jagnm.img: No such file or directory
even tho the path is correct. Through some experimenting I've found that i get the same error just by doing
Code:
[email protected]:/ # cd /sdcard
tmp-mksh: cd: /sdcard: No such file or directory
On the other hand i can do
Code:
[email protected]:/ $ cd sdcard
[email protected]:/sdcard $
which doesn't help me because i need the su permissions.
I would appreciate any help you can provide.
Same here...
A hint would be appreciated indeed
abmaar said:
Same here...
A hint would be appreciated indeed
Click to expand...
Click to collapse
Hi,
I, unfortunately, don't remember how I solved this issue exactly, but I think the problem was something with a broken symlink ( tbh I'm not sure whether it was broken or I was just doing something wrong). I am not able to reproduce the error now so I cant be more specific but try typing
Code:
ls -la
and you might be able to change directory to the target of the symlink.