I just received this skin for my Evo:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=400129173520
1. Way thinner than the HTC silicon rubber case
2. Somewhere between hard plastic and soft silicone. Think vinyl but stiffer.
3. Definitely not as shock absorbent
4. The skin extends up past the face of the phone about 1.5mm, so if you set the phone face down it won't touch the surface
5. It does not wrap around the face of the phone at all, which I like -- it gives you touch access to the entire touch screen surface, as opposed to the HTC silicone rubber skin. It's much easier to reach the edges of the touch screen, like using the phone naked
6. The top of the camera lens protrudes slightly from the back of the case. However, due to the curvature of the phone, when resting back-down on a table, the lens doesn't actually contact the surface by a small gap, .5mm at best
7. The argyle pattern on the back is very subtle
8. All the cutouts line up properly. The cutouts are rather large however; for example, the diameter of the cutout for the speaker hole is probably 5mm which is a bit excessive.
9. The skin is not tacky at all, it slips in and out of the pocket with ease and doesn't attract lint. However it's more slick and less grippy, so it won't stay put on your dashboard for example.
10. It's snug but not super snug, like it's not skintight.
11. For some reason there is a cutout for the backplate nail groove
is there a non-argyle version?
Looks like a white-label Amzer case:
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88260.htm
How does the product you have compare to the looks of that one?? Pretty much the same? I have been debating over one of these cases for a while now. Tried a lot of them out so far and havent found "the one"
i just dont want something that adds too much bulk! lol if i wasnt affraid of destroying the phone i would just let it go naked, but thats just too risky.
frettfreak said:
How does the product you have compare to the looks of that one?? Pretty much the same?
Click to expand...
Click to collapse
Well it doesn't say amzer anywhere on it or the packaging, and the amzer picture is a little different. There is one big cutout for the flash leds, camera, and speaker on the back. However the amzer picture might just be a photoshop mockup, and perhaps they are in fact the same.
If you want some protection without bulk and inconvenience, I recommend this case. It isn't quite as protective as the thicker silicon cases in terms of shock absorption, but it will protect against scratches and abrasions without sticking to your pocket or attracting lint.
I wasn't able to find one without the argyle print, but like I said, it's pretty subtle. If you wait, you can get one of the case-mate ones which I'm sure are higher quality.
just noticed the epik cases are out on ebay, only like 3.49 with free shipping! looks like it has individual cutouts for the led flash, camera, and speakerphone. i had to get one at that price, smoky black no pattern:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=300440215923
Just received my Epik case --
Now I have 3 different cases:
1. Sprint retail OEM silicone skin
2. Smoke argyle pattern TPU skin
3. (new) Black Epik TPU skin
Here are my impressions of the Epik TPU:
* The skin is thicker, softer, and tackier than the argyle skin, but less thick, soft and tacky than the silicone skin. I'd say it's right in the middle on all 3 accounts.
* The thickness fully recesses the camera lens
* Easy to get in/out of the pocket, doesn't attract dust/lint
* The color is not really black but more of a dark smoke color
* There are 3 individual cutouts for the components on the back
* There is no silly cutout for the battery cover nail groove
* The skin extends in over the bezel further than the argyle TPU, covering the screen seams
* The mic cutout is smaller than the argyle's
* The power and volume buttons stand out further than the argyle's, making them easier to find by touch
I definitely prefer this skin to the others. IMO, it provides the best tradeoff in terms of protection, looks and bulk.
catpunt said:
Just received my Epik case --
Now I have 3 different cases:
1. Sprint retail OEM silicone skin
2. Smoke argyle pattern TPU skin
3. (new) Black Epik TPU skin
Here are my impressions of the Epik TPU:
* The skin is thicker, softer, and tackier than the argyle skin, but less thick, soft and tacky than the silicone skin. I'd say it's right in the middle on all 3 accounts.
* The thickness fully recesses the camera lens
* Easy to get in/out of the pocket, doesn't attract dust/lint
* The color is not really black but more of a dark smoke color
* There are 3 individual cutouts for the components on the back
* There is no silly cutout for the battery cover nail groove
* The skin extends in over the bezel further than the argyle TPU, covering the screen seams
* The mic cutout is smaller than the argyle's
* The power and volume buttons stand out further than the argyle's, making them easier to find by touch
I definitely prefer this skin to the others. IMO, it provides the best tradeoff in terms of protection, looks and bulk.
Click to expand...
Click to collapse
Bought the argyle verison skin on ebay...then the non patterned ones. Been an epik case lover for ages...Well I tell you the ebay non patterned skins and the epik cases come in the same packaging. Note the original epik cases didnt come in retail packaging. When I emailed the seller he confirmed that they could sold by other ebay sellers too....hmmmm
frettfreak said:
Looks like a white-label Amzer case:
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88260.htm
How does the product you have compare to the looks of that one?? Pretty much the same? I have been debating over one of these cases for a while now. Tried a lot of them out so far and havent found "the one"
i just dont want something that adds too much bulk! lol if i wasnt affraid of destroying the phone i would just let it go naked, but thats just too risky.
Click to expand...
Click to collapse
I feel the same about the bulk. I like what people have been doing for the iPhone and skinning it which leaves it thin and adds a small layer of protection to it. I think the EVO could benefit from the same. (just my personal thoughts on the matter).
catpunt said:
Just received my Epik case --
Now I have 3 different cases:
1. Sprint retail OEM silicone skin
2. Smoke argyle pattern TPU skin
3. (new) Black Epik TPU skin
Here are my impressions of the Epik TPU:
* The skin is thicker, softer, and tackier than the argyle skin, but less thick, soft and tacky than the silicone skin. I'd say it's right in the middle on all 3 accounts.
* The thickness fully recesses the camera lens
* Easy to get in/out of the pocket, doesn't attract dust/lint
* The color is not really black but more of a dark smoke color
* There are 3 individual cutouts for the components on the back
* There is no silly cutout for the battery cover nail groove
* The skin extends in over the bezel further than the argyle TPU, covering the screen seams
* The mic cutout is smaller than the argyle's
* The power and volume buttons stand out further than the argyle's, making them easier to find by touch
I definitely prefer this skin to the others. IMO, it provides the best tradeoff in terms of protection, looks and bulk.
Click to expand...
Click to collapse
I just got that same Argyle case in the mail today and have the Epik one on order as well. The Argyle looks pretty nice, but the lip that extends past the screen is bugging me some. I guess I will get use to it. Does the Epik have the same lip or is it more flattened out?
catpunt said:
Just received my Epik case --
Now I have 3 different cases:
1. Sprint retail OEM silicone skin
2. Smoke argyle pattern TPU skin
3. (new) Black Epik TPU skin
Here are my impressions of the Epik TPU:
* The skin is thicker, softer, and tackier than the argyle skin, but less thick, soft and tacky than the silicone skin. I'd say it's right in the middle on all 3 accounts.
* The thickness fully recesses the camera lens
* Easy to get in/out of the pocket, doesn't attract dust/lint
* The color is not really black but more of a dark smoke color
* There are 3 individual cutouts for the components on the back
* There is no silly cutout for the battery cover nail groove
* The skin extends in over the bezel further than the argyle TPU, covering the screen seams
* The mic cutout is smaller than the argyle's
* The power and volume buttons stand out further than the argyle's, making them easier to find by touch
I definitely prefer this skin to the others. IMO, it provides the best tradeoff in terms of protection, looks and bulk.
Click to expand...
Click to collapse
pretty interested in this case, any chance you could post any pics of it since they dont have any in the ebay listing?
catpunt said:
Well it doesn't say amzer anywhere on it or the packaging, and the amzer picture is a little different. There is one big cutout for the flash leds, camera, and speaker on the back. However the amzer picture might just be a photoshop mockup, and perhaps they are in fact the same.
Click to expand...
Click to collapse
Just for the record, it does seem like a photosphop mockup (coloring wise) but the shape of the cutouts on the Amzer page is accurate. I got the Amzer Argyle skin off Amazon, took FOREVER to ship and then like 2-3 weeks to get here once it shipped but I'm pretty pleased with it. I'm pretty darn sure that the Amzer Argyle skins and the Epik TPU cases (along w/a couple other plain TPU cases on Ebay) share the same mold, based on the comparison/description that catpunt posted above.
My Amzer skin also recesses the lens (just enough to protect it) and also extends just past the screen seams. Anyway, I'll be able to confirm just how close the two skins are (Amzer/Epik) in a few days, I ordered a couple of Epik ones as well from DCMugen on Ebay. $7.50 for a red and a black + a screen protector and a cleaning wipe, why the heck not?
I ordered the Epik one even tho I already have the Amzer one for two reasons... Number one, I want to see how they look w/a clear battery door, showing off the phone's red internals thru the case. I can do that w/Amzer's but it might look too busy, even tho I actually don't mind the Argyle pattern. It's VERY subdued and nowhere near as prominent as it is on Amzer's site. I'll post some comparison pics once I've got all three cases in my hands.
The other reason I ordered the Epik one in red and black is the coloring or tint on the Amzer one... On the back it seems pretty black/grey, as you'd expect, but around the side edges it's a bit off... Has a bit of a brown tint to it, maybe a mix of amber and black. It doesn't look bad, just a tiny bit off. The Epik case looks to be a truer shade of smoke black all around (and the red looks pretty close to the EVO's red details). I think Amzer's oddity might be a function of the Argyle pattern, it's sort of etched on the inside. It might affect the coloring somehow.
In the end, these are all probably coming from the same source, except for the Argyle batches on Ebay w/those odd cutouts, the large single cutout for LED/camera/speaker and that weird one for the fingernail hole on the battery lid. Like I said, I'll post pics when I get my Amzer ones. I'm surprised that there's like no pics whatsoever out there of how the red one looks ON the phone.
In summary, Amzer Argyle != Ebay Argyle, Amzer's skin seems to be higher quality, definitely sourced from a different place. Amzer's colors are way off on their pics tho, the colors are closer to what the other Argyle skins look like, tho there seems to be some variation on the black/smoked one.
Overall I'm loving these TPU skin/cases tho... They blow the silicon ones out of the water. My silicon case didn't catch the inside of my pockets that much, but enough to be a bother, these slip out super easy but they've still got very good grip on your hand (perhaps better than silicon even). They also don't attract dust/lint AT ALL, my silicon case would develop this crusty line of crap along the screen edges within just a day of cleaning it, was pretty irritating.
Finally, as others have said, they feel way more svelte on your hand than the HTC/OEM silicon case... I don't know if it's the way the corners are rounded off or what, but it's a big difference in feel (altho probably not a huge difference in reality, they're thinner but not THAT much thinner). Oh and they're much more rigid/tight around the phone, the edges around the screen don't flop out, AT ALL... On silicon cases after a few weeks (or even when they're brand new) you can stretch 'em pretty easily by just flicking at it or if your thumb slips off screen... Not so with these.
TPU >>>>>>>>>>> silicon
You guys are aware that there is a person on this board selling TPU cases right?
http://forum.xda-developers.com/showthread.php?t=719527
And they are nice, got 4 of them for 19 dollars, shipping included.
Quick bit of take to make the button mashing easier and they are perfect.
catpunt said:
just noticed the epik cases are out on ebay, only like 3.49 with free shipping! looks like it has individual cutouts for the led flash, camera, and speakerphone. i had to get one at that price, smoky black no pattern:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=300440215923
Click to expand...
Click to collapse
I bought an Epik. Hate it. So far the best TPU case I've found is the one in the "Evo TPU Cases available" thread. It's clear, and the back is a matte finish. The Epik is super thick and bows out on the sides.
I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1
If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.
I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.
bought two of them from Dealextreme, but in black color, best TPU
Do they make them in matte black?
I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.
bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23
The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....
I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.
I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559
i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1
****** If you quote me, please edit out the picture links, so we don't waste bandwidth just for a 3 word reply ******
These are some of the cases I recently received, ordered on ebay via various vendors. Most cost around $1-2 with 3 costing $4-5, shipped free. I will try to input my opinions on most. Right off the bat I can tell you they all fit snugly and have cutouts for easy access to ports. But if you have any questions on any particular one, go ahead ask me.
I've included front and back, installed on Blue (I9300) and White (T999) versions.
CLICK ON THE THUMBNAIL TO ENLARGE.
Very Thin, smooth rubbery feel. Hard shell snap on.
http://www.ebay.com/itm/300724347133?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Thin, Great finish, grippy. Minor face lip. My favorite of the bunch. Fake SGP?
http://www.ebay.com/itm/280902743299?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Pleomax from Korea, has cutout for radio antenna. High quality. Face lip.
http://www.ebay.com/itm/140780489104?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
This one is 0.9mm, Very thin. Textured feel, grippy. Actually translucent magenta.
http://www.ebay.com/itm/300724347132?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Super Thin 0.5mm, Translucent gray. No face lip, slight camera rise. Textured, but not grippy. 2nd preferred.
http://www.ebay.com/itm/330755676521?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Same as the lime green above from another vendor, it didn't clip on right, requested a replacement (yea right)
http://www.ebay.com/itm/320934506306?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Very thin, 0.9mm, grippy. Translucent azure.
http://www.ebay.com/itm/330744757402?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
BEST Jelly TPU, translucent brown, sexy, unique. (had this one on until now)
http://www.ebay.com/itm/370624026017?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Clear snap on, super thin 05.mm, frosted, textured, but not grippy.
http://www.ebay.com/itm/271006294810?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I currently have the Diztronic matte clear case on my white GSIII. As it is starting to yellow a bit I have began the hunt for a nice fitting white case. I really like the fit of the Diztronic case because it does not add much bulk, it covers all the edges of the screen (unlike the barely there cases) and it has the cutouts for the volume rocker and power buttons.
Ideally, if I can find a case exactly like this in white I'd be happy but it seems that cases these days are usually a mix of colors and you can't just find a good quality all white TPU case that fit the criteria above.
So I'm turning to you guys to post pics of the white case you have as well as your impressions of it and a link to where the case can be purchased.
Thanks for the help.
I don't have one to show you but I'm getting the PureGear Dualtek Extreme Shock case in white.
www.gocellular.ca/?item=pg3029
This...
...is my actual case. It is soft TPU inside and grabbed by a black hard case. Fits perfect on my GS3 marble white!
http://www.ebay.de/itm/Hybrid-Hulle-Samsung-Galaxy-S3-Weis-Schwarz-TPU-Combi-Cover-Silikon-Schutz-/320959034332?pt=DE_Handy_PDA_Taschen_Schutzh%C3%BCllen&hash=item4abaa633dc
saj222 said:
I don't have one to show you but I'm getting the PureGear Dualtek Extreme Shock case in white.
www.gocellular.ca/?item=pg3029
Click to expand...
Click to collapse
Do you know if this case is able to fit in any of the docks?
got to many cases, here what i put on today cheap Box Wave case with no back cover
http://www.ebay.com/itm/Capdase-Sof...907947?pt=PDA_Accessories&hash=item20c891216b
Just got this, very nice case.
http://www.amazon.com/Acase-Samsung...1348091250&sr=8-8&keywords=acase+superleggera
Sort of white....
Sort of white. Red S3 with white Spigen Glass and White/Grey Otterbox Defender
I keep my GS3 naked and prefer the original design than others...
ngeual annuity
Great Case for the Galaxy s3. The case fits perfectly to the phone and is snug. It's very protective of the phone. The best thing is that I can now lay my phone face down and the glass doesn't touch.
I'm not a case person. I never really liked cases. I do however like the look of leather to some extent, making devices look old-school, like some cameras. I've seen a lot of videos featuring dbrand skins but in my opinion pretty much everyone just seems to overdo the 'skinning'. I'm looking at you people who add skins to the front and sides of a phone with orange, yellow and bright red colours at the same time.
I finally decided to order a leather back from dbrand, shipping all the way to The Netherlands.
Why? Simply because there's no other leather skin for the Xperia Z1. It cost me about €15 after conversion, fees and whatnot.
Sony Xperia Z1 - In Leather by Herman Groenbroek, on Flickr
In my experience, it was tougher to apply than I thought. I'm an accurate person, but I applied a bit of the skin slightly skewed and I feared I ruined the skin when I tried to take it off again. Thankfully that wasn't the case, but holy hell it's sticky. Another thing to note is that, although I didn't expect a leather feel (it really just feels like plastic), I did expect more grip than with a glass back. In the hand, it is actually less grippy with the skin, despite its texture. I do however like that I can just slide my phone across tables now. The glass (protector) on the back scratched easily doing that, but the plastic skin seems to hold up scratches very well.
I can recommend getting some skin for the back of your Xperia Z1, since it made me feel like my phone is as-new again. Also, all scratches on the back are hidden now :angel:
Looks nice! Thanks for posting this ! I'm hesitating about like dbrand, slipwrap, skinomi ( I'm planning hahaha but my phone is not alive at the moment so no go for now >__<