Related
Copying my posts from Android forums, PLEASE HELP
At first kies would not recognize my phone either, after going into device manager and installing drivers that were found on my computer (hopefully from installing kies) kies will now recognize that I connected a device but it says, to please reconnect in PC Studio mode, current mode is not supported by kies??, and then I get the windows USB device not recognized message, ODIN doesnt see my phone at all. Latest kies version is installed.
In an earlier post someone was talking about another drive in addition to kies, where do I find this??
Sorry I am so lost and frustrated, I am not a noob, I switched roms on my EVO every few days, but this is my first sammy and I can't get the damn thing to recognize my phone, Could anyone give me a detailed dumbed down step by step process please? Thank you!!!!
tried on my 2nd pc, kies intalled without error message, but didnt recognize my device, i chose the install drivers option in kies, it seemed to install, but odin doesnt recognize it and still says usb not recognized when i plug it in urrrrr!
ok so the second PC seems to have gotten the drive installed and my computer recognizes the it as samsung usb modem, and samsung android device, but it still isnt recognized by kies or odin, and the usb not recognized still pops up. When I go to device manager I can update the epic touch driver and it seems to take but there is also a USB mass storage driver that has a yellow triangle and I Cant seem to fix it.
Any help would be GREATLY appreciated, been trying on 2 computers for 2 days. I have a rooted EVO and G tablet, i swear I'm not a complete idiot, I just need my damn computer to recognize my phone! Thanks, sorry for the rant
To get mine to connect in kies I have to turn off usb debugging, and kies always says it has to close because of a problem but I just ignore it and don't click OK or close out the dialogue box and then the phone shows up and I can do stuff on kies. Hope this helps and hopefully its not like this for everyone else
mypd1991 said:
To get mine to connect in kies I have to turn off usb debugging, and kies always says it has to close because of a problem but I just ignore it and don't click OK or close out the dialogue box and then the phone shows up and I can do stuff on kies. Hope this helps and hopefully its not like this for everyone else
Click to expand...
Click to collapse
Close kies, open odin, make sure usb-debugging is enable on your phone, try connecting your phone to a different usb port. Should re-install drivers, and pop up in odin. You don't need to open kies at all.
Sent from my SPH-D710 using xda premium
Also, sometimes the USB cord itself can be faulty, or so was the case with the OG Epic.
SAShady said:
Close kies, open odin, make sure usb-debugging is enable on your phone, try connecting your phone to a different usb port. Should re-install drivers, and pop up in odin. You don't need to open kies at all.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
no mine is fine, that's just the way i have to do it to be able to sync with kies and stuff, my drivers are fine, it was just a suggestion for the op cause he sad he couldn't connect to kies, but i think i have to do it that way cause its through parallels desktop for mac.
Thanks guys, so im uninstalling kies yet again, then going to reinstall, reboot my pc, enable us debugging on my phone, plug it in,allow drivers to install (hopefully) and never open kies. Then I'll open odin and put my phone in download mode and then reconnect it to my pc right? Is it correct to assume that odin will only see my phone in download mode?
i had to do this for me http://forum.xda-developers.com/showthread.php?t=867518
Kies
You may also consider trying uninstalling Kies, installing/updating Java and then reinstalling Kies. What OS are you using on the PCs?
,
RRexA3 said:
You may also consider trying uninstalling Kies, installing/updating Java and then reinstalling Kies. What OS are you using on the PCs?
Click to expand...
Click to collapse
Thanks I will try this as well, hell ill try anything lol
Running vista 64 on one and xp sp2 on the other
Pitnefor said:
i had to do this for me http://forum.xda-developers.com/showthread.php?t=867518
Click to expand...
Click to collapse
I tried to install and got an error saying not enough storage space to install?
I have tons of storage free on my pc hmmm, I'll try in on the other one now
got root!
the java update seems to have done it
Thank you so much to everyone!!!!
So I have a yellow triangle on the splash screen underneath where it says samsung galaxy when my phone boots up, but everything is working so I assume thats ok
Yes, the triangle on the splash screen is normal if rooted
Yay
luigic81 said:
got root!
the java update seems to have done it
Thank you so much to everyone!!!!
Click to expand...
Click to collapse
Glad it helped =)
I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!
Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)
Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2
Have already done that. But just for laughs, I did do it again with no change.
can you get your D700 into download mode as described above?
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.
niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....
Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.
Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
Ok guys, I'm no noob but this phone has me stumped. Sold my S2 to a friend with Jedi on it. Worked good for a while and he said it started acting erratic. So I do a factory reset and it gets to the part where it says updating applications. Gets to about 70-90 and reboots and does it all over again. So I reflash it with TWRP to latest Jedi. Still the same. Gets to 70-90 updating apps and reboots. I tried putting it in download mode to factory flash it but it boots back into TWRP instead. It charges fine although the computer does not recognize it even though I have kies installed with latest drivers. I've flashed several different roms with same result. Gets to updating applications and freezes and reboots. Is there an alternate method for getting this thing into download mode? I fear it may be hardware related though it was booting and semi working when he brought it to me.
reocej said:
Ok guys, I'm no noob but this phone has me stumped. Sold my S2 to a friend with Jedi on it. Worked good for a while and he said it started acting erratic. So I do a factory reset and it gets to the part where it says updating applications. Gets to about 70-90 and reboots and does it all over again. So I reflash it with TWRP to latest Jedi. Still the same. Gets to 70-90 updating apps and reboots. I tried putting it in download mode to factory flash it but it boots back into TWRP instead. It charges fine although the computer does not recognize it even though I have kies installed with latest drivers. I've flashed several different roms with same result. Gets to updating applications and freezes and reboots. Is there an alternate method for getting this thing into download mode? I fear it may be hardware related though it was booting and semi working when he brought it to me.
Click to expand...
Click to collapse
How are you getting it into download mode? Plugging in into the PC with both volume buttons pressed during initial boot?
smokinjoe2122 said:
How are you getting it into download mode? Plugging in into the PC with both volume buttons pressed during initial boot?
Click to expand...
Click to collapse
Yes. That's the only way I know. But like I said it just goes to twrp instead. Any ideas?
reocej said:
Yes. That's the only way I know. But like I said it just goes to twrp instead. Any ideas?
Click to expand...
Click to collapse
If you can't get into download mode the way @smokinjoe2122 said, you are probably going to need a USB jig. You can find them on ebay for a few dollars. Make sure it is T989 compatible before you buy it.
The thing I would try first is take the battery out for five minutes, put it back in and then try getting into download mode.
Keep in mind that even with the jig, you may not be able to get it to work.
reocej said:
Ok guys, I'm no noob but this phone has me stumped. Sold my S2 to a friend with Jedi on it. Worked good for a while and he said it started acting erratic. So I do a factory reset and it gets to the part where it says updating applications. Gets to about 70-90 and reboots and does it all over again. So I reflash it with TWRP to latest Jedi. Still the same. Gets to 70-90 updating apps and reboots. I tried putting it in download mode to factory flash it but it boots back into TWRP instead. It charges fine although the computer does not recognize it even though I have kies installed with latest drivers. I've flashed several different roms with same result. Gets to updating applications and freezes and reboots. Is there an alternate method for getting this thing into download mode? I fear it may be hardware related though it was booting and semi working when he brought it to me.
Click to expand...
Click to collapse
The PC isn't recognizing the phone BCUZ u have kies installed, Odin and kies don't mix so if kies is anywhere installed Odin won't see the phone, and kies won't see it because u have an unlocked bootloader... Try removing kies hen using Odin, if u need drivers search Samsung USB driver dl
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
soupysoup said:
The PC isn't recognizing the phone BCUZ u have kies installed, Odin and kies don't mix so if kies is anywhere installed Odin won't see the phone, and kies won't see it because u have an unlocked bootloader... Try removing kies hen using Odin, if u need drivers search Samsung USB driver dl
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not true and that wouldn't keep it from going into d/l mode. And I only installed kies after I couldn't get odin to recognize it to see if kies would. I have a second T989 (unlocked bootloader) that works just fine with both programs installed. I suspected that maybe he got the phone wet at some point and he said he had indeed. I think this is whats causing the issues. Phone charges fine but no program will read it.
Hi,
I have been a regular visitor of this website and have gained quite a good amount of knowledge through this forum.
I have been with android for the past 2 years and I have loved the android experience.
2 days ago, I read that there was a feature in android whereas the free apps access the internet frequently and use up precious battery power also the paid apps access the google play store in order to verify licenses. Both these kind of apps wakes up itself regularly and this eats up huge amount of battery.
To counter this I was searching for solutions through this website and found that there was an app which could be downloaded and which can handle such kind of scenario. Lucky Patcher. I didn't read the whole thread but I just went ahead and downloaded that app and my phone stopped working minutes after its installation. Upon reading the whole thread I found out that the android phone needs to be rooted in order for that app to work. BIG MISTAKE!
Now my phone is dead. I can start it but it gets stuck on the Samsung Galaxy S3 logo and never goes ahead.
I took the help of this forum to flash a stock ROM of S3 onto my fone using Odin 3.07 and a stock rom downloaded from samsung dash updates dot com.
This is the name of the folder that was downloaded from the website
"Samsung-Updates.com-SGH-T999V_GLW_1_20120818102113_dgbyab64vd"
I tried flashing it using Odin following the procedure but there was nothing happening on the software or on the phone. I kept the phone attached while Odin was "Initialising" for around 4-5 hours. I slept along that time, and when I woke up, it was still there. I was supposed to get "PASS!" on Odin but I didn't get that. I downloaded the previous versions of the stock ROM and tried that but all in vain.
Phone model: SGH-T999V (Wind Mobile, Canada)
Now I can't find a solution to this problem and this is my last resort. By the weekend I will go to one of those mobile stores which I haven't seen in ages, but will have to go there as I am unable to revive back my fone. And I utterly miss using it.
If there is anything any of you guys can help me with, I will be more than happy to reply to any further information you need.
Thank you all for reading, and thanks a million for even thinking of helping me.
God Bless you all.
-shanxthechashmish
I can't get in recovery mode (Home+volumeUP+Power). it vibrates once but the screen remains blank.
I can get into downloading mode (Home+volumeDown+Power). which gives me two options, one to continue and the other to cancel.
(May be this helps to determine whether my phone has been bricked or not!)
Using ODIN, the following information is given and is stuck at this only...
"<OSM> KIES_HOME_T999VVLDLL1_T999VYVLDLL1_CL616748_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation.."
Usually, if you're stuck.during boot you just need to factory reset. Are you sure you're trying the right way to boot recovery? Hold volume up, home and power, when it vibrates, release power but continue holding volume up and home. Some blue text should flash at the top of the screen (you can let go of all buttons now) and it should boot recovery.
No idea why Odin isn't working. Do you have kies installed? If so, get rid of it, reboot and try again.
You could try flashing CWM or TWRP (see my Sig). Then boot recovery and factory reset or flash a Rom.
Sent from my SGH-T999L using Tapatalk 4
Sounds like the drivers are missing. Or you need to run ODIN as administrator
I'm with @KAsp3rd, the computer is not seeing the phone, reinstall the USB drivers try again.
Here is a guide I made:
1. Download and install USB Drivers from here: Thanks to @DocHoliday77 for hosting
http://www.androidfilehost.com/?a=show&w=files&flid=1368
2. Download and extract ODIN 3.07 from here: Thanks to @DocHoliday77 for hosting
http://www.androidfilehost.com/?a=show&w=files&flid=1369
3. Download Stock ROM image (.tar file) from here: Thanks to @DocHoliday77 for hosting
http://forum.xda-developers.com/showthread.php?t=1949687
4. Save all open files and reboot computer
5. Boot phone into Download mode (also called ODIN mode) by shutting down the phone and holding Volume Down & Home then pressing Power until it vibrates, still holding Volume Down & Home buttons, until the "Yellow Triangle" screen shows up.
6. Plug phone into computer and open ODIN 3.07 and make sure that only "Auto Reboot" and "F. Reset Time" are checked.
7. Click on the "PDA" button (right side about half-way down), browse for ROM .tar file, click "Open" button.
8. Click "Start" button and watch to "Reset" or "Fail" to show in the 1st square (upper left side),
9. Phone will reboot
10. Leave phone alone for 10mins+ to let all of the first time boot stuff complete.
Good luck with it.
DocHoliday77 said:
Usually, if you're stuck.during boot you just need to factory reset. Are you sure you're trying the right way to boot recovery? Hold volume up, home and power, when it vibrates, release power but continue holding volume up and home. Some blue text should flash at the top of the screen (you can let go of all buttons now) and it should boot recovery.
No idea why Odin isn't working. Do you have kies installed? If so, get rid of it, reboot and try again.
You could try flashing CWM or TWRP (see my Sig). Then boot recovery and factory reset or flash a Rom.
Sent from my SGH-T999L using Tapatalk 4
Click to expand...
Click to collapse
yes, I was doing the right way with the boot recovery. There was a blue text when the SAMSUNG logo flashed, but nothing after that. I let go off the power button while holding the power up and home buttons, but nothing went ahead.
I dont have kies installed. My laptop has a fresh win 7 ultimate installation. I got the usb drivers for samung already installed, it detects the phone everytime on one of the COM ports.
I'll go through the flashing CWM and TWRP. you meant your signature, right?
sorry for being such a newbie..
KAsp3rd said:
Sounds like the drivers are missing. Or you need to run ODIN as administrator
Click to expand...
Click to collapse
TI reinstalled the drivers using the Samsung flashing kit that was available here on xda developers.
I am not sure if ODIN is run as admin. I guess I need to try that one tonight. In class right now, too anxious to study..
wil post up the results as soon as i reach back home..
shanxthechashmich said:
yes, I was doing the right way with the boot recovery. There was a blue text when the SAMSUNG logo flashed, but nothing after that. I let go off the power button while holding the power up and home buttons, but nothing went ahead.
I dont have kies installed. My laptop has a fresh win 7 ultimate installation. I got the usb drivers for samung already installed, it detects the phone everytime on one of the COM ports.
I'll go through the flashing CWM and TWRP. you meant your signature, right?
sorry for being such a newbie..
Click to expand...
Click to collapse
Yes, in my signature. But the others may still be correct. When you connect and open Odin does it show the port number in the top left area? If not then it's probably a driver issue, even if they're installed. Happens a lot believe it or not. Also try other usb ports on the computer.
If you can flash recovery in Odin though, this is all irrelevant of course! Either way let us know what happens.
Sent from my SGH-T999L using Tapatalk 4
DJ_SpaRky said:
I'm with @KAsp3rd, the computer is not seeing the phone, reinstall the USB drivers try again.
Here is a guide I made:
1. Download and install USB Drivers from here: Thanks to @DocHoliday77 for hosting
http://www.androidfilehost.com/?a=show&w=files&flid=1368
2. Download and extract ODIN 3.07 from here: Thanks to @DocHoliday77 for hosting
http://www.androidfilehost.com/?a=show&w=files&flid=1369
3. Download Stock ROM image (.tar file) from here: Thanks to @DocHoliday77 for hosting
http://forum.xda-developers.com/showthread.php?t=1949687
4. Save all open files and reboot computer
5. Boot phone into Download mode (also called ODIN mode) by shutting down the phone and holding Volume Down & Home then pressing Power until it vibrates, still holding Volume Down & Home buttons, until the "Yellow Triangle" screen shows up.
6. Plug phone into computer and open ODIN 3.07 and make sure that only "Auto Reboot" and "F. Reset Time" are checked.
7. Click on the "PDA" button (right side about half-way down), browse for ROM .tar file, click "Open" button.
8. Click "Start" button and watch to "Reset" or "Fail" to show in the 1st square (upper left side),
9. Phone will reboot
10. Leave phone alone for 10mins+ to let all of the first time boot stuff complete.
Good luck with it.
Click to expand...
Click to collapse
Thnaks for this detailed list.
but i know this drill, the only problem being that the phone is not going anywhere after the step where the ODIN has already flashed the file on the phone.
It gets stuck while "Initializing.." I have posted that as an update on my Post.
As KAsp3rd said that I must try running it as an administrator, I might do it tonight and will let you all know what it gave me..
Thanks for all the help..
I think we posted at the same time so did you see my post? Do you remember if Odin had the port number at the top left? In the Odin output it said ID:0, so it may not be seeing the phone.
Sent from my SGH-T999L using Tapatalk 4
@DocHoliday77
Yes, it shows the COM port on the top left corner of the ODIN.
I have also uninstalled and reinstalled the driveres several times, but with no effect.. I am thinking the run as administrator is the one thing I havent thought of or tried or seen anywhere on the forum.
I will post the result of that as well by tonight.
And thanks for hosting so many files online. I downloaded the one that was needed for the Stock Firmware.
Ok, and in case you don't know, uninstalling the driver software isn't enough on its own. Go into device manager, right click and either update drivers, or uninstall, then install the new driver package.
Sent from my SGH-T999L using Tapatalk 4
DocHoliday77 said:
Ok, and in case you don't know, uninstalling the driver software isn't enough on its own. Go into device manager, right click and either update drivers, or uninstall, then reboot computer, then install the new driver package.
Sent from my SGH-T999L using Tapatalk 4
Click to expand...
Click to collapse
Windows, always reboot after uninstalling any drivers.
@DocHoliday77
I tried that thing again. Reinstalled the drivers after uninstalling and rebooting. there is still no response.
I gave it to one of my friends, he tried putting in the recovery file and now the screen says "Installation of the software has been interrupted, please restart to begin"
I'll post the screenshot in the morning now.
Also, @KAsp3rd : I tried running Odin as administrator, but the same thing happened. It used to get stuck at "Initialization"
Any more advices ?
shanxthechashmich said:
@DocHoliday77
I tried that thing again. Reinstalled the drivers after uninstalling and rebooting. there is still no response.
I gave it to one of my friends, he tried putting in the recovery file and now the screen says "Installation of the software has been interrupted, please restart to begin"
I'll post the screenshot in the morning now.
Also, @KAsp3rd : I tried running Odin as administrator, but the same thing happened. It used to get stuck at "Initialization"
Any more advices ?
Click to expand...
Click to collapse
Is it the phone that says installation interrupted? When he tried flashing the recovery did he use odin? Did it seem to flash properly?
Something else I don't thonk hss been mentioned is to try a different usb cable. Preferably one thst came with the phone, or another device. (Some cables sold for recharging are not capable of data transfer on these devices).
Also, try all ports on the computer, and unplug all unnecessary peripherals.
If something happened and you got a bad flash, it could be bricked. Can't remember if you tried KAsp3rd's unbrick method already.
Another thing you can try to get recovery installed is to adb shell into the device and using the dd command, dump recovery to the phone. Youll have to have the android sdk installed to do this though.
Its hard to say what's really needed at this point though. Usually if you can get download mode, you can Odin the stock firmware. Most Odin problems are due to driver and cable issues. (Is Windows fully updated?)
Even though you can get download mode, the debrick method may still help, but I'm just not sure. Maybe I'm missing something.....
Sent from my SGH-T999L using Tapatalk 4
DocHoliday77 said:
Is it the phone that says installation interrupted? When he tried flashing the recovery did he use odin? Did it seem to flash properly?
Something else I don't thonk hss been mentioned is to try a different usb cable. Preferably one thst came with the phone, or another device. (Some cables sold for recharging are not capable of data transfer on these devices).
Also, try all ports on the computer, and unplug all unnecessary peripherals.
If something happened and you got a bad flash, it could be bricked. Can't remember if you tried KAsp3rd's unbrick method already.
Another thing you can try to get recovery installed is to adb shell into the device and using the dd command, dump recovery to the phone. Youll have to have the android sdk installed to do this though.
Its hard to say what's really needed at this point though. Usually if you can get download mode, you can Odin the stock firmware. Most Odin problems are due to driver and cable issues. (Is Windows fully updated?)
Even though you can get download mode, the debrick method may still help, but I'm just not sure. Maybe I'm missing something.....
Sent from my SGH-T999L using Tapatalk 4
Click to expand...
Click to collapse
I have the original cable with me, the one that came with the s3.
he tried using ODIN, but thats as far as I know. He said something about using Kies to flash the rom as well. not sure what.
No, I didn't try KAsp3rd's unbrick method. Could you please guide me where could I find that?
Also, everything you said after this unbrick method simply doesn't make any sense to me. May be some guided instructions would be helpful.
And yes, the windows is fully updated, no issue on that.
Where can I find the unbrick method?
If you want to just search for android sdk. It'll find Google's page for it and instructions. Should also find some good guides on installing and using. All I'd 've doing is searching for then repeating it back to you, so it'll be easier for both of us if you just go to the source. I think it's developer.Google com or something similar.
And she'll basically connects to your phone and allows you to run commands as if you were using the terminal emulator.
The debrick thread is stickies in development.
Sent from my SGH-T999V using Tapatalk 4
what is the official stock firmware can i download directly? and what are name of the firmware and how long the procedure to flash that?
Firmware thread stickies in development section. Link is also in my Sig. Everything you need to know and download to get started is in that thread.
Sent from my SPH-L710 using Tapatalk
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
...
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
update!!
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
update
chatovishious said:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
Click to expand...
Click to collapse
spammy l said:
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
Click to expand...
Click to collapse
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Gladi80rPrincess09 said:
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Click to expand...
Click to collapse
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
help me!
chatovishious said:
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
Click to expand...
Click to collapse
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Gladi80rPrincess09 said:
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Click to expand...
Click to collapse
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Thank you! progress/update
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Gladi80rPrincess09 said:
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Click to expand...
Click to collapse
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
question
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
CCallahan said:
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
Click to expand...
Click to collapse
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Gladi80rPrincess09 said:
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Click to expand...
Click to collapse
Can you get the device back in download mode?
update!!
CCallahan said:
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
---------- Post added at 10:59 AM ---------- Previous post was at 10:54 AM ----------
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Gladi80rPrincess09 said:
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Click to expand...
Click to collapse
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
thank you for the help!!
chatovishious said:
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
Click to expand...
Click to collapse
i got it to work!!!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Hey! Still stuck?
Poebat said:
Hey! Still stuck?
Click to expand...
Click to collapse
No according to the post above yours.
koop1955 said:
No according to the post above yours.
Click to expand...
Click to collapse
K. Sometimes something appears to work and then fails :/ happens sometimes
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Gladi80rPrincess09 said:
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Click to expand...
Click to collapse
nothing wrong with rooting if you know what you're doing. ?
Sent from my SM-G900P using Tapatalk