Develop Bugs

[Q] [UPDATED] USB trouble and brickish issues

UPDATE:
I'm thinking I could download rom manager and use it to install the stock rom... but given the trouble that I had with flashing roms before:
(My phone had a working version of Axiom 2.4 on it. I decided to try to flash a few new roms (gummy, liquid, codename android) and all had the same issue, they would boot, go to the upgrading android screen, finish that and go straight to the homescreen without the "welcome to android/activating" screens, then freeze after 10 seconds requiring a battery pull. Sorta led to this mess)
I'm not sure its a good idea.
Any thoughts? I really just need to get rid of the lock on the splash screen.
I'm considering just letting it sit till an ota comes out and either A: relocks the phone so I'll return it, or B: effs it so badly I can return it.
Drop box + 4G can be an annoying workaround for usb functionality.
Having some trouble with the GNex.
I was stuck in recovery, now I have it booting with minimal apps in my nand of a stock rooted rom. (Minimal apps as in I have none of the system apps I uninstalled nor any user installed apps. Luckily I do have the android market)
However my underlying issue with the USB remains.
I am unable to connect it to a computer and have it recognized, whether the phone is booted (trying to mtp or whatever so I can see the files) or in adb or fastboot. The same error 43 comes across on both of my computers. The phone DOES charge via usb.
I'd like to return it to VZW claiming a broken usb, but the phone is still unlocked, and it shows the unlocked icon with the google splash screen. Is there anyway I can relock the thing and return it, or alternatively does anyone have any ideas on getting the usb working? I've tried both the pdanet method of drivers and the ones from the samsung site to no avail.
Thanks in advance!

You could try reinstalling the USB drivers. I'd suggest downloading pdanet on your computer and run the wizard.
Edit: I should have read your last paragraph. Sorry :/
Sent from my Galaxy Nexus using xda premium

Found this on the GS2 forum.
http://forum.xda-developers.com/showthread.php?t=1203802
People had success cleaning their phones USB port with a toothbrush.
Sent from my Galaxy Nexus using xda premium

El Daddy said:
Found this on the GS2 forum.
http://forum.xda-developers.com/showthread.php?t=1203802
People had success cleaning their phones USB port with a toothbrush.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Didn't seem to work but thanks for the tip!

[Q] I lost my USB Connection with a Samsung Galaxy S2 Epic 4G Touch SPH-D710

I just installed the new Android 4.0.4 TBASGIIIv1.8 ROM for my Epic 4G touch and lost the USB connectivity with Windows-7. My computer will no long recognized the phone when plugged into the USB port and it worked fine with the Android 4.0.3 ICS FD16 ROM. It use to come up in windows saying SPH-D710 with a pop-up windows and with this new rom installed it will no longer recognize the phone. Is this a simple fix or problem with the new ROM because I would like to be able to download some of my files using Samsung Kies?

What ROM is the? And where did you get it from (link)? Team Rejects? How did you flash?

X83 said:
I just installed the new Android 4.0.4 TBASGIIIv1.8 ROM for my Epic 4G touch and lost the USB connectivity with Windows-7. My computer will no long recognized the phone when plugged into the USB port and it worked fine with the Android 4.0.3 ICS FD16 ROM. It use to come up in windows saying SPH-D710 with a pop-up windows and with this new rom installed it will no longer recognize the phone. Is this a simple fix or problem with the new ROM because I would like to be able to download some of my files using Samsung Kies?
Click to expand...
Click to collapse
Try to download the app USB switched make sure it's on mass storage
Sent from my SPH-D710 using Tapatalk 2

It’s the newest version of the ICS based custom ROM with the Galaxy S3 theme and all the detailed instruction are listed in this link: http://www.androidauthority.com/galaxy-s2-epic-4g-touch-ics-custom-rom-galaxy-s3-theme-93959/
I downloaded the newest version 1.8 from this thread link: http://forum.xda-developers.com/showthread.php?t=1673662
Everything works fine with the exception of the USB connectivity was lost and the computer will no longer recolonize the phone when attached via USB cable.

I download an app called USB switcher and made sure it’s on the mass storage but still inoperable.
When the USB cable connection is made the computer gives and audible note a will briefly flash a storage device for a second in the Computer – Devices with Removable Storage window then quickly disappears.
I’ve tried going back to the EL29 stock ROM about three times and the USB connection works fine with ICS Android 4.0.3 but doesn’t function at all with the latest ICS based custom ROM with the Galaxy S3 theme?

I'd first try to uninstall any samsung drivers you have on your PC then re-install them. Get em here http://org.downloadcenter.samsung.c...342248/Sprint_d710_USB_Driver_v1_3_2360_0.exe
Also try a different USB port AND cable.
If that fails I'd grab Mobile Odin from the market and download one of sfhub's one-clicks and install it (he has instructions for flashing from the phone on signature http://forum.xda-developers.com/showpost.php?p=23478866&postcount=869 in his posts.)
---------- Post added at 10:31 PM ---------- Previous post was at 10:29 PM ----------
Ah I see. probably disregard my last post then.
Use sfhub's autoroot package to enable mass storage http://forum.xda-developers.com/showpost.php?p=24010029&postcount=889
That may work.

I tried uninstalling the drivers and reloading them a few times and even tried it on different computer.
I updated the Kernal using the PC based Odin3 v1.85 and flashed the EL26 stock CWM and might just have to try using the mobile version.

X83 said:
I tried uninstalling the drivers and reloading them a few times and even tried it on different computer.
I updated the Kernal using the PC based Odin3 v1.85 and flashed the EL26 stock CWM and might just have to try using the mobile version.
Click to expand...
Click to collapse
Check out sfhub's autoroot package - Under "Extra Options" for the mass storage thingy

I had the same problem with my old et4g. I was running calks ics rom and kept getting the voltage to high notification and i wasnt even charging. And it also was no longer being recognized by the computer. Tried every fix. I went back to calks gb rom and still had the same problem with voltage notification and not being recognized. I tried to mobile odin back to a stock rom and it soft bricked my phone. It will only boot into recovery and i can get no where from there. Thought it may be the physical part itself so i ordered a new one and got my phone apart but the sprint version of the galaxy s2 is made into the board and im not quite sure what to desolder and solder
Sent from my SPH-D710 using xda premium

I just installed the latest stock FF18 Modem/Kernel/ROM and the USB connection works fine now.

My 4G signal sucks donkey balls on this FF18 ROM.
I tried just flashing the FG26 modem using this FF18 ROM but it's still a problem.
I'm going back to the FD26 ROM because that had the best 4G signal IMO.

KnukLHead said:
I had the same problem with my old et4g. I was running calks ics rom and kept getting the voltage to high notification and i wasnt even charging. And it also was no longer being recognized by the computer. Tried every fix. I went back to calks gb rom and still had the same problem with voltage notification and not being recognized. I tried to mobile odin back to a stock rom and it soft bricked my phone. It will only boot into recovery and i can get no where from there. Thought it may be the physical part itself so i ordered a new one and got my phone apart but the sprint version of the galaxy s2 is made into the board and im not quite sure what to desolder and solder
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
take a look here if you have not already http://forum.xda-developers.com/showthread.php?t=1731751

You should still be able to use the download mode to flash the stock ROM using Odin OC without the phone being able to boot up?

The problem I always had was getting it to connect to the computer cause the USB port is jacked up. I finally jacked with it enough that it connects 1 time out of 5. Used the method u just linked and its back up and running. Hell yea. Thanx. Don't know what I'm gonna do with it now cause in already got a replacement and I don't think the ESPN is any good but I could always flash it to boost or something
Sent from my SPH-D710 using xda premium

Device USB Error on Windows 7 (Lost USB Connection)
After following this post (http://forum.xda-developers.com/showthread.php?t=1721229) by sfhub, my machine won't recognize my phone via USB. It worked fine before when I rooted and installed CWM on the EL29 build. USB connection worked fine after upgrade to ICS FF18 as well. Only after running ODIN root did I have an issue reconnecting to install CWM.
Error from Windows states "Device Malfunction. Device cannot be recognized via USB..."
Tried reinstalling Samsung drivers and updating Windows. Nada. Any one else having this issue and/or have a resolution?
</Rob>

J.rkdesign said:
After following this post (http://forum.xda-developers.com/showthread.php?t=1721229) by sfhub, my machine won't recognize my phone via USB. It worked fine before when I rooted and installed CWM on the EL29 build. USB connection worked fine after upgrade to ICS FF18 as well. Only after running ODIN root did I have an issue reconnecting to install CWM.
Error from Windows states "Device Malfunction. Device cannot be recognized via USB..."
Tried reinstalling Samsung drivers and updating Windows. Nada. Any one else having this issue and/or have a resolution?
</Rob>
Click to expand...
Click to collapse
Should also note that I did a "Keep User Data" install option. Will try and do the wipe version tonight and see if that resolves anything.

no USB
X83 said:
I just installed the latest stock FF18 Modem/Kernel/ROM and the USB connection works fine now.
Click to expand...
Click to collapse
How did you do that without USB connection? My phone has a problem and I need to get it completely back to stock for warranty repair. A week or so ago I lost USB connect-ability. I do not have ICS installed.

harry5315 said:
How did you do that without USB connection? My phone has a problem and I need to get it completely back to stock for warranty repair. A week or so ago I lost USB connect-ability. I do not have ICS installed.
Click to expand...
Click to collapse
Download a stock rom to your computer, then use a wifi app to load it on your phone, use mobile Odin app to flash it.
Sent from my SGH-I897 using Tapatalk 2

Normally it is the answer to it always try multiple things to gain solution in the future
Sent from my SPH-D710 using XDA

Galaxy Nexus Back to Stock with No USB

Galaxy Nexus(Verizon CDMA)
ICS 4.0.4
Build number: IMM30B
Unlocked
Not rooted
I was hoping someone here might be able to help me with my Galaxy Nexus. My Mac, PC, or Linux box won't recognize my phone anymore. I've tried multiple battery pulls, cords, driver updates(Windows 7), an have wiped the phone. My Nexus 7 is recognized by all 3 PCs so it seems like a phone issue.
When I first got the phone, it had 4.0.2 on it but the battery life was horrendous so I manually flashed 4.0.4 IMM30B instead of waiting for the official OTA. I have read on another thread that someone with the same version of ICS had the same USB issue. They ended up returning the phone. I have a feeling that this is software related and not hardware.
So my question is, is it possible for me to go back to stock 4.0.2. It seems like Odin and fastboot all need usb. I read that a factory format may be possible using a dialer code(*2767*3855#), but when I tried it it didn't do anything. Probably worth noting that I didn't take any backups before flashing.

only thing i know without a USB is mobile ODIN.
https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro

Thanks for the response Zep but from what I understand Mobile Odin requires root
Zepius said:
only thing i know without a USB is mobile ODIN.
Click to expand...
Click to collapse

Are you sure it's not a driver issue?
If you can't use the USB port AND you don't have root AND you don't have a custom recovery, I don't think there is much else you can do.
Sent from my Galaxy Nexus using Tapatalk 2

Efrant is correct. I think you should try manually installing drivers for Galaxy Nexus. There are few helpful instruction on how to install drivers on xda

kraymondksc said:
Galaxy Nexus(Verizon CDMA)
ICS 4.0.4
Build number: IMM30B
Unlocked
Not rooted
I was hoping someone here might be able to help me with my Galaxy Nexus. My Mac, PC, or Linux box won't recognize my phone anymore. I've tried multiple battery pulls, cords, driver updates(Windows 7), an have wiped the phone. My Nexus 7 is recognized by all 3 PCs so it seems like a phone issue.
When I first got the phone, it had 4.0.2 on it but the battery life was horrendous so I manually flashed 4.0.4 IMM30B instead of waiting for the official OTA. I have read on another thread that someone with the same version of ICS had the same USB issue. They ended up returning the phone. I have a feeling that this is software related and not hardware.
So my question is, is it possible for me to go back to stock 4.0.2. It seems like Odin and fastboot all need usb. I read that a factory format may be possible using a dialer code(*2767*3855#), but when I tried it it didn't do anything. Probably worth noting that I didn't take any backups before flashing.
Click to expand...
Click to collapse
On you windows box, what do you see when you plugin your phone with the device manger window open? Is nothing detected at all?

Are you using the same cable between the nexus 7 adn the Gnex? If not, the cable you are using with your Gnex may be a charge only cable or it could be damaged.

[SOLVED] Unable to flash SGS3 T999, phone hangs on system.img.ext4

Greetings:
I have an SGH-T999 SGS3. It was running ICS.
When using Kies, I was offered the upgrade to Jellybean (LJA). The Kies update hung at 23%, for hours, repeatedly, and never exited.
I've now downloaded the root66 LJA system, and am trying to flash with ODIN. ODIN has now been stuck for an hour at system.img.ext4.
Can anyone help me get *anything* flashed to this phone, so I can get out of recovery mode please?
Thanks in advance!
Click to expand...
Click to collapse
To anyone having this problem, I fixed it by:
1. Using Odin307 instead of Odin185 AND
2. Using a different USB cable.
I don't know which of those two things fixed it, since I tried both at once, but that fixed it.
The entire update took 6 minutes once I changed those two things.
Thanks!
Glen

It takes a lot of time to flash system.img.ext4. I think it may take less or more time based on your computer and other factors. Just let it flash and wait. Mine took about 1.5 hour.
Sent from my frozen SGH-T999

Still waiting after one hour so far...
HajmeR said:
It takes a lot of time to flash system.img.ext4. I think it may take less or more time based on your computer and other factors. Just let it flash and wait. Mine took about 1.5 hour.
Sent from my frozen SGH-T999
Click to expand...
Click to collapse
Okay, started at 3:34 PM Pacific time. Still stuck (but not failed, interesting) at 4:37 PM (one hour so far.) I will advise.
This is on an HP Pavilion dv7-2173cl with a fresh load of Windows 8, no bloatware other than the stock stuff. (A similar attempt on an HP dv7-2043cl running Windows 7 also appeared to stick at the same point, but I only waited 30 minutes before giving up.)
By comparison, and just for interest, my international SGS3, I9300, updated over Kies in about 4 minutes, on the same computer. So I would be interested to know why an I9300 goes so fast, and a T999 goes so slow, if there are any ideas...

SOLVED!
glenbarney said:
Okay, started at 3:34 PM Pacific time. Still stuck (but not failed, interesting) at 4:37 PM (one hour so far.) I will advise.
This is on an HP Pavilion dv7-2173cl with a fresh load of Windows 8, no bloatware other than the stock stuff. (A similar attempt on an HP dv7-2043cl running Windows 7 also appeared to stick at the same point, but I only waited 30 minutes before giving up.)
By comparison, and just for interest, my international SGS3, I9300, updated over Kies in about 4 minutes, on the same computer. So I would be interested to know why an I9300 goes so fast, and a T999 goes so slow, if there are any ideas...
Click to expand...
Click to collapse
To anyone having this problem, I fixed it by:
1. Using Odin307 instead of Odin185 AND
2. Using a different USB cable.
I don't know which of those two things fixed it, since I tried both at once, but that fixed it.
The entire update took 6 minutes once I changed those two things.
Thanks!
Glen

glenbarney said:
To anyone having this problem, I fixed it by:
1. Using Odin307 instead of Odin185 AND
2. Using a different USB cable.
I don't know which of those two things fixed it, since I tried both at once, but that fixed it.
The entire update took 6 minutes once I changed those two things.
Thanks!
Glen
Click to expand...
Click to collapse
I experience this problem when I use a non-samsung usb cable(Vibrant and S3). It would always freak me out, because it would stay for hours and would usually end up in a soft brick.

all I've used on any of my Android phones is a cheap Blackberry-brand usb cable from Amazon. I think it was $2.00 or so. Hasn't failed me yet :good:
I would bet that it was probably just your very old version of Odin, honestly.

Kalm_Traveler said:
all I've used on any of my Android phones is a cheap Blackberry-brand usb cable from Amazon. I think it was $2.00 or so. Hasn't failed me yet :good:
I would bet that it was probably just your very old version of Odin, honestly.
Click to expand...
Click to collapse
I would bet that it is the USB cable. I tried flashing stock on my Verizon Note 2 and nothing happened after 90 minutes. I spent three hours flashing nothing happened. I was using the box included Samsung cable, then I read this thread so I might as well try it. I got my sister's HTC Incredible 2 cable and what would you know it was done in under 5 minutes. :laugh: Next time i flash i am going to have a tower of cables next to me

Kalm_Traveler said:
all I've used on any of my Android phones is a cheap Blackberry-brand usb cable from Amazon. I think it was $2.00 or so. Hasn't failed me yet :good:
Click to expand...
Click to collapse
Me too!
Flashing a full image through Odin should take 10-15 minutes tops. Is the phone connected as a USB 2.0 device? Sometimes the buggy drivers will put it into 1.0 mode.

mattedwards2686 said:
I experience this problem when I use a non-samsung usb cable(Vibrant and S3). It would always freak me out, because it would stay for hours and would usually end up in a soft brick.
Click to expand...
Click to collapse
thanks for the help man it really helped me !!
:good:

SCH-I605 Flash Fails with Odin
I am having a similar issue with my Note II. I tried to flash a new bootloader to facilitate the installation of the KitKat based Ditto Note 3 rom. I, in my failure to read 6 posts down, used mobileOdin to try and accomplish this. My phone is now a plush, soft brick. I can get into download mode. Given this, I have been trying to flash my phone using Odin for windows only to have it fail every time. I have tried different roms, partitions, bootloaders, versions of Odin, PCs, cables and even a couple of different poses. I am not new to rooting and roms, every android device I own is rooted and running custom roms. Any help from those who are definitely more knowledgeable than myself (the XDA community) would be GREATLY appreciated.
Phone Information:
Was running MeanBeanICE
Verizon phone
In download (Odin) mode:
Product Name: GT-N7100
Custome Binary Download: no
Current Binary: Official
System Status: Custom
Warranty Bit: 0

talonzme said:
In download (Odin) mode:
Product Name: GT-N7100
Custome Binary Download: no
Current Binary: Official
System Status: Custom
Warranty Bit: 0
Click to expand...
Click to collapse
Wrong Device Forum bud. This is T Mobile Galaxy S3 Only. You are Looking for Note II on Verizon I believe. Here's the correct Forum,

Yup, you'll get better, more specific help there. But just fyi, if kies is on your computer, uninstall it. Also, when trying different version drivers, make sure you first uninstall old ones through device manager. See my sig for drivers. They should work for any sammy device.
Sent from my SGH-T999 using Tapatalk

Apologies
DocHoliday77 said:
Yup, you'll get better, more specific help there. But just fyi, if kies is on your computer, uninstall it. Also, when trying different version drivers, make sure you first uninstall old ones through device manager. See my sig for drivers. They should work for any sammy device.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Sorry for the erroneous post. I do have the latest Samsung driver and I have uninstalled Kies. Thank you for your time. I have made a post in the Note II section. Hopefully I will find some joy soon!

talonzme said:
Sorry for the erroneous post. I do have the latest Samsung driver and I have uninstalled Kies. Thank you for your time. I have made a post in the Note II section. Hopefully I will find some joy soon!
Click to expand...
Click to collapse
Actually, dont use the latest. Try a few versions back. The latest, while it should still work, was built for the S5/Note3/Gear. It included significant changes as I understand it. Also in your case driver version doesn't matter. Some have had to try several before getting it to work. Sometimes the original works better than any newer ones.
Good luck with it though!
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Actually, dont use the latest. Try a few versions back. The latest, while it should still work, was built for the S5/Note3/Gear. It included significant changes as I understand it. Also in your case driver version doesn't matter. Some have had to try several before getting it to work. Sometimes the original works better than any newer ones.
Good luck with it though!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I will give that a go.

talonzme said:
I will give that a go.
Click to expand...
Click to collapse
Did you ever solve this?

mrdunlop said:
Did you ever solve this?
Click to expand...
Click to collapse
I did it involved the out jtag repair. It that where i was unrecoverable by standard means.

life saver
glenbarney said:
To anyone having this problem, I fixed it by:
1. Using Odin307 instead of Odin185 AND
2. Using a different USB cable.
I don't know which of those two things fixed it, since I tried both at once, but that fixed it.
The entire update took 6 minutes once I changed those two things.
Thanks!
Glen
Click to expand...
Click to collapse
thanks bro
i used a different USB Cable it worked.........
thanks alot

[Q] Att S3 Wont Connect to Computer

I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!

Huskerjeff said:
I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!
Click to expand...
Click to collapse
Make sure fast charge isn't selected.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

KorGuy123 said:
Make sure fast charge isn't selected.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I can not find any fast charge setting. I am starting to worry that I might have damaged the phone. I hope I just need to re-flash a driver or something.
Thank you!

make sure you're using the factory cable for the device.
try another USB port, preferably a port directly connected to the computers motherboard.
delete the current USB drivers for your phone on the computer. reboot it. in task manager, stop any kies background processes. reinstall drivers. reboot and see if that takes.

Huskerjeff said:
I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!
Click to expand...
Click to collapse
Did you make a nandroid of the previous rom ? Flash back to that . Flashing any rom made for the NA version of the Galaxy s3 will NOT brick your phone. NO physical damage will happen in any way.
Yes check the cord to make sure its not that....samsung phones are picky....even with the same cord.
Fast charge is usually in the kernel settings menu. It will be something you would had to enable, I've never seen it come enabled on a rom. What kernel are you on ? I don't think you see that setting on TW based rom's anyway ( I assume you are on SoA right now?)
Have you tried to do a complete wipe and flash another rom ?

hednik said:
Did you make a nandroid of the previous rom ? Flash back to that . Flashing any rom made for the NA version of the Galaxy s3 will NOT brick your phone. NO physical damage will happen in any way.
Yes check the cord to make sure its not that....samsung phones are picky....even with the same cord.
Fast charge is usually in the kernel settings menu. It will be something you would had to enable, I've never seen it come enabled on a rom. What kernel are you on ? I don't think you see that setting on TW based rom's anyway ( I assume you are on SoA right now?)
Have you tried to do a complete wipe and flash another rom ?
Click to expand...
Click to collapse
I have a nandroid of my stock (after rooted) ROM, but it is on my computer now, not on the phone so I cant access it. I also had a nandroid of Sons of Android that was connecting just fine before I flashed Synergy ROM. I restored the Sons of Android ROM (nandroid) that was still on my external SD card and that didnt fix it.
I just did a complete wipe (Cache, Davlik Cache, System, Factory Reset, and Internal Memory), then installed the Wicked ROM with the stock kernel. It still doesnt work.
I tried two different cord on two different computers with no luck.
Thank you!

Is your usb debugging enabled?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta

Huskerjeff said:
I have a nandroid of my stock (after rooted) ROM, but it is on my computer now, not on the phone so I cant access it. I also had a nandroid of Sons of Android that was connecting just fine before I flashed Synergy ROM. I restored the Sons of Android ROM (nandroid) that was still on my external SD card and that didnt fix it.
I just did a complete wipe (Cache, Davlik Cache, System, Factory Reset, and Internal Memory), then installed the Wicked ROM with the stock kernel. It still doesnt work.
I tried two different cord on two different computers with no luck.
Thank you!
Click to expand...
Click to collapse
Completely remove the drivers on your PC and reinstall again. Also if you have kies remove that first.
Sent from my SAMSUNG-SGH-I747 using xda premium

Domoo said:
Is your usb debugging enabled?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
Click to expand...
Click to collapse
USB Debugging is currently enabled, but I have tried it both ways.
I also am noticing my data connection is really, really slow, much slower than normal. I looked under the Synergy ROM and there was some talk of needing to reflash modem and bluetooth when reverting to a stock kernel. Could this be the problem?
Thanks!

You could try mobile Odin and flash the rooted stock that way... Its a shot
You have to use a .tar file though
Sent from my SAMSUNG-SGH-I747 using xda premium

hednik said:
You could try mobile Odin and flash the rooted stock that way... Its a shot
You have to use a .tar file though
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Can you you give me some more info on Mobile Odin? I have never heard of it.
Last night I flashed the KT747 kernel because it has updated USB drivers, but it still didnt work.
I still have to believe that something went wrong when flashing the other night because that is when it stop work, but I am starting to think it is a hardware issue. It is very wierd!
Thank you!

Do you get any error when plugging it? I had a similar issue last week until I updated Windows.

BWolf56 said:
Do you get any error when plugging it? I had a similar issue last week until I updated Windows.
Click to expand...
Click to collapse
Nope, no error message. It just doesnt reconize it is there. I have tried three computers (Windows 7 - 64 Bit & (2) XP 32 Bit) and three different cords.
This sucks! Now I am hearting it from all the iPhone users.
Thanks!

Huskerjeff said:
Can you you give me some more info on Mobile Odin? I have never heard of it.
Last night I flashed the KT747 kernel because it has updated USB drivers, but it still didnt work.
I still have to believe that something went wrong when flashing the other night because that is when it stop work, but I am starting to think it is a hardware issue. It is very wierd!
Thank you!
Click to expand...
Click to collapse
Try this, same thing was happening to me on a rooted stock rom. The steps listed here helped me reconnect phone to PC.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones

Huskerjeff said:
Nope, no error message. It just doesnt reconize it is there. I have tried three computers (Windows 7 - 64 Bit & (2) XP 32 Bit) and three different cords.
This sucks! Now I am hearting it from all the iPhone users.
Thanks!
Click to expand...
Click to collapse
Try wiping and flashing another ROM?

dratsablive said:
Try this, same thing was happening to me on a rooted stock rom. The steps listed here helped me reconnect phone to PC.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
Click to expand...
Click to collapse
I hope we are getting closer!
When is use the *#7284#, I get the UART section that is on PDA and I cant change it.
Under the USB section I have button that says "Qualcomm USB Settings" with a whole punch of options:
MTP
MTP + ADB
PTP
PTO + ADB
RNIS + DM + MODEM
RMNET + DM + MODEM
DM + MODEM + ADB
Should I use one of these settings?
Thank you!

Huskerjeff said:
I hope we are getting closer!
When is use the *#7284#, I get the UART section that is on PDA and I cant change it.
Under the USB section I have button that says "Qualcomm USB Settings" with a whole punch of options:
MTP
MTP + ADB
PTP
PTO + ADB
RNIS + DM + MODEM
RMNET + DM + MODEM
DM + MODEM + ADB
Should I use one of these settings?
Thank you!
Click to expand...
Click to collapse
You should have two options, MODEM and PDA. Mine is set to MODEM.

Still no luck! Very Frustrating!
I used Mobile Odin to flash back completely to stock, and the usb still would not connect. I do not know what else to do. I will have to remove the SD Card and use a card reader for now. I can flash back to stock when if I want to take it in and get it fixed or replaced.

Huskerjeff said:
Still no luck! Very Frustrating!
I used Mobile Odin to flash back completely to stock, and the usb still would not connect. I do not know what else to do. I will have to remove the SD Card and use a card reader for now. I can flash back to stock when if I want to take it in and get it fixed or replaced.
Click to expand...
Click to collapse
did u already try another cable, I had over 5 cables that suddenly stopped working for no reason, only charges but it doesn't connect to the pc..
so try another cable is my suggestion.