Develop Bugs

SuperCID on HTC Desire C

So there was an exploit found for the One X to change the CID and I thought I'd try and adapt the same method for the Desire C (if possible).
My phone is rooted, ROM is Nameless v2.0.2
So I started dumping all the mmcblk0p1, p2, p3 etc till I got to p7. Open that up in the hex editor and at offset 0000200 there's my CID (locked to Bell Mobility here in Canada) BM___001 ... so now I thought I'd give it a whirl myself. It seems that this is the wrong location however, because changing that to 11111111 and then pushing back to the phone, reboot, fastboot getvar cid gives me the same thing, BM___001 ... am I being a newb and this is because of S-ON?? In the original version he says to check the cid by using fastboot oem readcid but that doesn't seem to be supported in my version of fastboot. I don't know... anyway, any and all help would be appreciated. I'm going to try and find any other instances of the CID in any of the block partitions...
Hopefully someone else cares as much as I do :fingers-crossed:
So there's another instance of the CID at offsets 1440/1450 in the same file, /dev/block/mmcblk0p7
I'll try changing both and see what happens... nothing, apparently.. still getting BM___001 from fastboot getvar cid

HTC One X (HTC__203) cannot find suitable RUU

Every shipped Rom I downloaded prompt "Installscript has stopped working". Now I'm stuck at custom Rom and Hbot 0.94. Radio 1204.104.14.
I want to return to stock but cannot find my version of RUU. Can your guy help me out, I'm really frustrated. My Cid Number is HTC__023
http://www.androidfiles.org/ruu/?developer=Endeavor

Post the output of the following:
Code:
fastboot getvar version-main
We will find an appropriate RUU or nandroid backup for your device!

Unable to fix MID after using HTC Dev

While trying to flash the new RUU I got some bad advice and relocked my bootloader. To unlock it again I changed the cid to 1111111 and used HTC Dev to unlock again.
I've now changed my CID back to VZW__001, but my MID is still 0P6B20000. I've tried following these instructions: http://forum.xda-developers.com/showthread.php?t=2707627, but even after recieving this successful response:
Code:
17+0 records in
17+0 records out
17 bytes transferred in 0.004 secs (4250 bytes/sec)
When I run getvar mid my mid is still 0P6B20000. This is keeping me from flashing the RUU which is looking for the correct mid of PN0731000 and fails with "FAILED (remote: 52 image check fail)".
Does anyone have any idea how I can correct my mid so I can flash this RUU and update my firmware?

iAmNotorious said:
When I run getvar mid my mid is still 0P6B20000. This is keeping me from flashing the RUU which is looking for the correct mid of PN0731000 and fails with "FAILED (remote: 52 image check fail)".
Does anyone have any idea how I can correct my mid so I can flash this RUU and update my firmware?
Click to expand...
Click to collapse
Are you sure you have the right RUU for M8 ?
AFAIK PN0731000 is for M7
0P6B20000 is M8

ckpv5 said:
Are you sure you have the right RUU for M8 ?
AFAIK PN0731000 is for M7
0P6B20000 is M8
Click to expand...
Click to collapse
Mmm that's it! Should probably not try to stay up all night. The RUU I was looking at was the new M7 RUU.

how to change desfault cid desire 616 to show my Fav language on language menu?

hi every one
i have a desire 616 with mediatek chip , and i want to change default cid !!
default cid : htc_038
i changed default cid to htc_J15 from this path : system/htc resource/default cid , but after factory reset my device shown below error:
nv cid is modifed to a invalid value
-----------------------------------------------
current cid : Htc_038
nvm cid : A07
valid cid: HTC_038, HTC_059, HTC_044, HTC_622
nvm cid is invalid, if yes ,it will do factory reset and apply the current cid HTC_038 to replace.
Click to expand...
Click to collapse
when i press ok my device do factory reset but the problem remains and again shown top errors .
whats problem ?
how to change default cid correctly ?

Need firmware - CID: T-MOB009 MID: 2PS262000

I need full RUU (exe or zip)
1.80.118.1 or
1.80.118.3 or
1.80.118.4
(to get OTA)
or
2.41.118.3
2.41.118.4
can anbody help?

I still need it, anybody can help?
I have 2.41.401.4 and Viper 10 5.7.0 and need come back to stock.
EDIT
CID: T-MOB009

2PS6IMG PERFUME UHL N70 SENSE80GP MR TMO PL 2.41.118.4.zip