[Q] Help for my xperia arc 4.0.4 rooted please - Xperia Arc Q&A, Help & Troubleshooting

i flashed my arc to android 4.0.4 from this thread http://forum.xda-developers.com/showthread.php?t=1683957 and i downloaded the global version
then i rooted it from this thread http://forum.xda-developers.com/showthread.php?t=1601038
then i reflashed it from the first thread as the vedio saying
then the phone started excellent and no problems but i installed force2sd app and when i start it and use it to move my apps like games and other apps it says to me operation unsuccessful
is there fix for this error or any other solution
note: i used alot of other apps to move2sd and all of them don't move anything
please help me for this problem thank you guys

mahmoud10roro said:
i flashed my arc to android 4.0.4 from this thread http://forum.xda-developers.com/showthread.php?t=1683957 and i downloaded the global version
then i rooted it from this thread http://forum.xda-developers.com/showthread.php?t=1601038
then i reflashed it from the first thread as the vedio saying
then the phone started excellent and no problems but i installed force2sd app and when i start it and use it to move my apps like games and other apps it says to me operation unsuccessful
is there fix for this error or any other solution
note: i used alot of other apps to move2sd and all of them don't move anything
please help me for this problem thank you guys
Click to expand...
Click to collapse
have you flashed the kernel only FTF in the second flash or the ready to root FTF

OverLo4d said:
have you flashed the kernel only FTF in the second flash or the ready to root FTF
Click to expand...
Click to collapse
yes i flashed it i did like the video exactly

please guys help me i am a beginner in android world

How to root 4.0.4
If you are on 4.0.4 then Just flash the kernel from 4.0.3 firmware and rooot your mobile using DooMLoRD's method to root 4.0.3 (above)
How to flash kernel-
Put 4.0.3 firmware in the firmwares folder and flash it using the following settings
In Exclude choose:
Exclude System
Exclude Baseband
Exclude Fota
When rooted successfully, put the 4.0.4 firmware in firmware's folder and and again flash the kernel from 4.0.4 ( only the kernel) using the same settings shown above
You don't need to flash whole firmware during the process, but just the kernel

LDinisPT said:
How to root 4.0.4
If you are on 4.0.4 then Just flash the kernel from 4.0.3 firmware and rooot your mobile using DooMLoRD's method to root 4.0.3 (above)
How to flash kernel-
Put 4.0.3 firmware in the firmwares folder and flash it using the following settings
In Exclude choose:
Exclude System
Exclude Baseband
Exclude Fota
When rooted successfully, put the 4.0.4 firmware in firmware's folder and and again flash the kernel from 4.0.4 ( only the kernel) using the same settings shown above
You don't need to flash whole firmware during the process, but just the kernel
Click to expand...
Click to collapse
thanks man but your post came late i already flashed from the beginning and all my apps and sms and every thing gone
now it's not the problem my problem is in the force2sd app it says to me in every action to move an app ( operation unsuccessful ) can you know the solution please ? and thanks for replayeing me

and where can i get kernel of 4.0.3 for arc ?????

mahmoud10roro said:
and where can i get kernel of 4.0.3 for arc ?????
Click to expand...
Click to collapse
Use the one for arc s.

thank you guys i solved my problem by your help and rooted my phone by Root_Exploit_OneClick and now i can use force2sd thank you alot guys

Related

Rooted with DooMKernel v15 with 4.0.A.2.368

Hello,
I have rooted my phone with the latest DooMKernel version: v15.
I forgot to first update my Xperia arc to the newest Build-Number (with the OF xperia update) and now I am still on Android 2.3.3, 4.0.A.2.368 with the DooMKernal:
2.6.32.9-DoomKernal.
Is this bad for my phone?
Do I need to change anything or is my phone fully functional know?
edit: ok I have flashed my xperia arc with the LT15i_4.0.A.2.368_Generic Global update using the newest version of FLASHTOOL. now my phone seems to be running on Official Firmware again
I'm trying to install the newest Firmware now.. then I can (without worries) install the latest DoomKernal version?
edit2: I still can't update to the latest official update with the xperia PC updater.. why is this?? (error: the phone contains edited software that can't be updated).
do I need to flash the newest update with flashtool on my phone??
DooMKernel works perfect on the latest firmware (.42) so go ahead and install it
Sent from my iPad 2 using Tapatalk
well that's exactly my problem, I can't update my phone to the latest firmware (.42) .. read my post
My Xperia Arc is now flashed with the LT15i_4.0.A.2.368_Generic Global update and when I try to install the .42 firmware, I get a error message that says: the phone contains edited software that can't be updated.
So do I need to flash the newest update with flashtool on my phone??
If u can instal the DoomKernel,
Then I'm sure that u have unlocked your bootloader.
As far as I know, you can't uodate via ota or pc companion if u unlocked the bootloader.
Just update it by flashing .ftf .
You can find the update on the development or general sub forum
Sent from my Anzu using xda premium
thank you for your reply
I have downloaded this update: LT15i_4.0.2.A.0.42_Generic_Global.ftf
will flash it any moment!
Another question about the DoomKernal
I'm really losing sight here ...
So the latest version of DoomKernal is the [ARC/ARC S] DooMKernel (v15) (FW: 4.0.2.A.0.42) [ 2.0Ghz version ] .. but why is WIFI disabled??
Do I need to download another kernel, or something like a plugin??
How can I get everything to work like wifi ect..?
Edit: I found out that I have to use his modules to get the rest to work (don't know why the DoomKernal isn't complete .. but ok).
So I downloaded the ARC-DooMKernel-v15-modules_CWM how can I install/use this with the DoomKernal v15?
Install doomkernel, then boot the phone, at boot the leds will light up, hit the back button then, phone going in recovery then and then install the modules via apply zip from sd card.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Install doomkernel, then boot the phone, at boot the leds will light up, hit the back button then, phone going in recovery then and then install the modules via apply zip from sd card.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
HAHA IT HAS WORKED!! SO MUCH THX, from now on I love this forum!
If I have any more questions about my phone I will post it in this forum! Great Community!!
Yes, when you use the newer doomkernel you have to flash additional module to have the wifi work.
Anyway, so you also updated to 4.0.2.A.0.42. I wanted to try the latest doomkernel v15 on my older firmware but it was designed supposedly for .42. Also, I'm not sure if it will work on me because if I don't update firmware then my baseband is lower also, so dunno if the modules will work on a lower baseband. Any ideas if it will?
Also, a later firmware is going around as well : 4.0.2.A.0.58. So I thought I will just wait it out till either doomlord makes a kernel based on that, or just flash the arconium custom rom based on it, when I got the mood to do it.

[Q] How to Backup stock Kernel + ROM ?

Hello Guys !
I wanna try some custom ROM so before doing that want to backup my Kernel & ROM. If anything gone wrong so I can revert back to original ROM.
My Cell details:
Xperia Arc S
LT18i
Android Version 2.3.4
Baseband Version -64
Build number
4.0.2.a.0.62
Locked bootloader
& unrooted.
Please someone guide me....
Thanks in advance...
If your bootloader's locked then you can't back up. You can only reload(repair)it from PC companion.
sinkster©
Thanks sinkster !
Ok done unlocked bootloader.
Then advice the further steps...
XPERIA CWM AUTO INSTALLER
download this app and install CWM recovery on ur phone...
Then reboot ur phone into recovery mode...
TO DO THIS, LONG PRESS BACK BUTTON WHILE THE PHONE RE-BOOTS
(OR)
KEEP TAPPING VOLUME DOWN BUTTON...
After it boots into recovery, go to BACKUP & RESTORE and Select Backup...
This will create a NANDROID BACKUP on your phone exactly as it is...including apps n contacts n all other data..
you can find it in SDCARD/Clockworkmod/Backup/
Good day...
If you wanted to take a backup without installing CWM you can use fastboot to boot (not flash) a kernel that has CWM built in.
thanks amulbaby
I will try and get back here with comment ...
EDIT:
I tried that steps but it will works only on rooted phone ..., can not enter in to recovery mode by pressing any key, it normally boots up and appear home ...
smartarse93 said:
If you wanted to take a backup without installing CWM you can use fastboot to boot (not flash) a kernel that has CWM built in.
Click to expand...
Click to collapse
How to do so... any guide links pls .. .
ShresthasR said:
thanks amulbaby
I will try and get back here with comment ...
EDIT:
I tried that steps but it will works only on rooted phone ..., can not enter in to recovery mode by pressing any key, it normally boots up and appear home ...
Click to expand...
Click to collapse
Why don't you root it with flashtool then?
But for that u wud have to downgrade to .42, with flashtool before rooting
Hey I am also wondering about this. I have lt15i flashed with Official .562, locked bootloader and CWM installed via flashtool.
Which ICS roms will work with official .562 and locked bootloader? I have been searching all morning but not a lot of updates regarding this since the official .562 release.
djsneak1 said:
Hey I am also wondering about this. I have lt15i flashed with Official .562, locked bootloader and CWM installed via flashtool.
Which ICS roms will work with official .562 and locked bootloader? I have been searching all morning but not a lot of updates regarding this since the official .562 release.
Click to expand...
Click to collapse
PROBABLY THIS ..... NOT SURE ....
T.E.A.M. Stock Rom for 2011 Xperia devices
amulbaby said:
Why don't you root it with flashtool then?
But for that u wud have to downgrade to .42, with flashtool before rooting
Click to expand...
Click to collapse
Here is the point I was looking for these alternative . . .
I have STOCK ROM with 4.0.2.a.0.62, actually I want to backup these stuff, I read about that downgrading via flashtool and root, if I flashed via flashtool that STOCK ROM will wipe...
Anyway here what I did to make a copy of my stock firmware & upgraded to ICS firmware & rooted.
Repaired my phone using Sony update service to download and backup STOCK firmware
Flashed with flashtool official firmware LT18i 4.1.A.0.562 NCB Icecream Sandwich Official
First you need to download a kernel that has cwm built in, I would search for recoveryARC.IMG then you also need fastboot from the SDK.
All you would do is connect your phone I'm fastboot then run in a command prompt fastboot boot recoveryARC.IMG. Your phone would then boot using that kernel and you can enter cwm by pressing the vol down several times. This process wouldn't flash your kernel only load it temporarily.
I would try and find a guide about them but I'm on my phone.
Sorry just noticed you've already done it, congrats enjoy ics.
Sent from my LT18i using XDA
smartarse93 said:
First you need to download a kernel that has cwm built in, I would search for recoveryARC.IMG then you also need fastboot from the SDK.
All you would do is connect your phone I'm fastboot then run in a command prompt fastboot boot recoveryARC.IMG. Your phone would then boot using that kernel and you can enter cwm by pressing the vol down several times. This process wouldn't flash your kernel only load it temporarily.
I would try and find a guide about them but I'm on my phone.
Sorry just noticed you've already done it, congrats enjoy ics.
Sent from my LT18i using XDA
Click to expand...
Click to collapse
Thanks bro ...
I already upgraded, anyway I want to know the process, you mentioned here this process wouldn't flash kernel only load it temporarily, I am confused...
Could you describe in details .. ? Actual what happens if we flash recovery img...
Well you can use fastboot to install the kernel which overwrites the previous one, or you can use it boot the kernel which just sends the kernel to the phone which the boots and temporarily uses the kernel. However when the phone next shuts down it will return to normal use.
If you flash a kernel it writes the .IMG to the boot partition. So if I wanted to use a kernel that stayed between reboots I would use 'fastboot flash boot kernelname.IMG'
However if I was running stock I could use recoveryARC.IMG with cwm, and do fastboot boot recoveryARC.IMG then run update.zip as normal. Then all you have to do is reboot, you'll be back to stock but the update would still be installed.
Sorry if it's not cleat, the best I could do on my phone.
Sent from my LT18i using XDA
Please elaborate on backing up STOCK ROM
ShresthasR said:
Here is the point I was looking for these alternative . . .
I have STOCK ROM with 4.0.2.a.0.62, actually I want to backup these stuff, I read about that downgrading via flashtool and root, if I flashed via flashtool that STOCK ROM will wipe...
Anyway here what I did to make a copy of my stock firmware & upgraded to ICS firmware & rooted.
Repaired my phone using Sony update service to download and backup STOCK firmware
Flashed with flashtool official firmware LT18i 4.1.A.0.562 NCB Icecream Sandwich Official
Click to expand...
Click to collapse
Can you please give me details on you did this? It is precisely what I want to do (ie. Backup the stock carrier rom on my Xperia Arc before flashinging an old ROM in order to root it).
Did you use the "repair" option from "Sony PC Companion 2.1>Support Zone>Phone software update>repair phone"?
Or did you use the software from here: http: // w ww(dot)sonymobile(dot)com/gb/tools/update-service/
Can you please tell me the whole procedure on how you did the backup of the STOCK ROM? Thanks!
King of Procrastinators said:
Can you please give me details on you did this? It is precisely what I want to do (ie. Backup the stock carrier rom on my Xperia Arc before flashinging an old ROM in order to root it).
Did you use the "repair" option from "Sony PC Companion 2.1>Support Zone>Phone software update>repair phone"?
Or did you use the software from here: http: // w ww(dot)sonymobile(dot)com/gb/tools/update-service/
Can you please tell me the whole procedure on how you did the backup of the STOCK ROM? Thanks!
Click to expand...
Click to collapse
Actually what I did just followed this guide
http://forum.xda-developers.com/showthread.php?t=1304634
At this thread just follow the video tutorial under section
"How to backup your carrier firmware using Update Service"
Youtube link: http://youtu.be/bB77gWRUI_A
Thanks XperienceD for nice guide
just want to ask, does CWM backup also backups the kernel or firmware?
and how do i restore stock kernel with or without using ODIN?
how do i go on flashing custom firmware? i really do need explanation especially for the .img file that i have been seeing guys.
please help me out because i really want to learn more about software and stuff.
thank you very much and god bless you guys.
ROM backup OK; How to take backup of Kernel
I am using Sony Xperia Ray ST18i
used it for a year with stock kernel and ROM
rooted it long ago, but was afraid of custom ROMs
last month I unlocked bootloader, flashed ROM and custom ROM (beanstalk 4.3.075), enjoying it but obviously not so stable like stock
Now if I wish to move back to my stock kernel and ROM
what steps are required.
I suppose
1. flash the stock kernel
2. restore from backed up ROM (I do have nandroid backup of stock ROM)
but how to achieve the step 1, as I learnt nandroid backup doesn't backs up ROM.
My collegue is having same phone still on stock, Can I use his phone somehow to extract kernel. I searched and found a zip to be used through CWM which backs up kernel it was meant for some samsung phone I tried but failed.
Thanks in advance.
Do I need to supply some more information to get help?
Backup stock ROM
I used this backup guide, but dont know if it will work for you http://helpadude.com/how-to-backup-your-android-rom/
If it does plz give thanks

i have rooted .42 is there any problem will happend if i update to .62 over air??

like the subject says
i have rooted .42 with locked bootloader is there any problem will happend if i update to .62 over air??
problem like boot looping cant boot ....etc
and for sure i will lost my toot right??
islam_ashraf said:
like the subject says
i have rooted .42 with locked bootloader is there any problem will happend if i update to .62 over air??
problem like boot looping cant boot ....etc
and for sure i will lost my toot right??
Click to expand...
Click to collapse
there shouldn't be any problem. and no, you won't lose your root.
when i applied the 4.0.2.a.0.62 it restarted and there is error appear in bar (couldnt install)
islam_ashraf said:
when i applied the 4.0.2.a.0.62 it restarted and there is error appear in bar (couldnt install)
Click to expand...
Click to collapse
Did you removed some system app's?
no , just used link2sd app to move all app files
i think its may be the problem
Solution
If you have the .42 and you want to get the .62 root you have to do this:
- Flash with flashtools the .42 original room
- With flashtools root your phone.
- Start updating via OTA to .62
If you have 0.42 and you root this with superoneclick or other that not be Flashtools you wouldn't get your .62 root OTA
aaah thanks , i just want to update to .62 so i be ready to receive ICS when available Nothing else :S
but i think i will be wait when availble official to Arc (not Arc S) i will flash it via flash tool
I recomend to you installing ICS version of ARC S and then flashing the Doomlord kernel for setting the correct CPU clock. (only for unlocked bootloaders).
But... well ok, if you want to wait to the official version you can see very good changes from .42 to .62, better battery life, more stability at the system running, etc...
the feedback of arc user says that is was some problem with touch due to different kernel even with arconiume ICS rom
i think i will try unroot we zurg brush (winch i root first) and root again with flash tool )
and try to upgrade from ota
oka
i found link for .42 but its 150 MB unlike the other link which is 250 !!
i found the first link in http://forum.xda-developers.com/showthread.php?t=1330314 topic
and uploaded.to server is suck so i search for another link like hotfile cause i have premiuim there
http://uploaded.to/file/vmfu4czg
http://www.multiupload.nl/X8PNLLNB5M
is hotfile file is right ?

[Q] Please Help

Hi ...
I have Xperia arc s (LT18i) I have rooted it and downloaded rom on it (Xperia Ultimate HD™ 2.0)
and every thing worked perfectly ...
then I installed Font Changer to change system font ..
I tried few fonts .. but when I tried one of them (it always ask to reboot) the phone got stuck at xperia logo ...
I tried few solutions (reinstalling the ROM, wipe dalvik cache, wipe battery stats, Wipe data/factory reset)
and every time I reboot nothing change ..
then I tried to do these things (format /system, format/data, format cache) and then reboot ...
the phone got stuck on sony logo and been unable to run CMW ...
so if any one have a solution I will be so thankful ...
flash stock rom, root, install cwm and install xperia ultimate hd.
Don't install Font Changer
jman2131 said:
flash stock rom, root, install cwm and install xperia ultimate hd.
Don't install Font Changer
Click to expand...
Click to collapse
sorry .. but how to flash stock rom ?? and where can I find it ??
will the phone boot after flashing the rom to root it ??
thank for your help .. and sorry for disturbing you ...
M7ammad.eb said:
sorry .. but how to flash stock rom ?? and where can I find it ??
will the phone boot after flashing the rom to root it ??
thank for your help .. and sorry for disturbing you ...
Click to expand...
Click to collapse
download rootable lt18 stock ics and then flash this to your arc s. Here is a tutorial on how to flash with the program 'Flashtool'. After, root phone with this. And then install Ultimate HD
jman2131 said:
download rootable lt18 stock ics and then flash this to your arc s. Here is a tutorial on how to flash with the program 'Flashtool'. After, root phone with this. And then install Ultimate HD
Click to expand...
Click to collapse
sorry again for disturbing you ...
but the link says "This file is no longer available."
I want ask .. is this fine ??
[ARC S][ROM/KERNEL] 4.1.B.0.587 Stock rom and original kernel to use after root
and thanks again for helping me ...
M7ammad.eb said:
sorry again for disturbing you ...
but the link says "This file is no longer available."
I want ask .. is this fine ??
[ARC S][ROM/KERNEL] 4.1.B.0.587 Stock rom and original kernel to use after root
and thanks again for helping me ...
Click to expand...
Click to collapse
sorry about the bad link
Yes you can use that, but you must flash this kernel after you flash that stock firmware to root.
M7ammad.eb said:
sorry again for disturbing you ...
but the link says "This file is no longer available."
I want ask .. is this fine ??
[ARC S][ROM/KERNEL] 4.1.B.0.587 Stock rom and original kernel to use after root
and thanks again for helping me ...
Click to expand...
Click to collapse
The download link is fixed
Link to all official firmwares: http://forum.android.com.pl/f308/oprogramowanie-dla-sony-ericsson-xperiaa-arc-s-147007/
By the way, you can not root .587 you have to download .562 or like mentioned before just flash 562 kernel, root and then flash back to 587 kernel. But I think easier should be to download .562 firmware and then just root.
Ping. said:
But I think easier should be to download .562 firmware and then just root.
Click to expand...
Click to collapse
The easiest method is with an unlocked boot loader, install 587, flash CWM'd Kernel, flash Root.zip, done.

Cant flash "Newer" kernels

I flashed 4.1.A.0.562 and it went well after i rooted and was gonna flash to 4.1.B.0.587 it seems to go well i dont get any error on flashtool BUT when i go into setting and check Kernel it says im still on 4.1.A.0.562 and i have unlocked bootloader and im stuck now please help :^)
Just flash ICS Kernel..
Sent from my ST18i using XDA Free mobile app
TheRavenblue said:
I flashed 4.1.A.0.562 and it went well after i rooted and was gonna flash to 4.1.B.0.587 it seems to go well i dont get any error on flashtool BUT when i go into setting and check Kernel it says im still on 4.1.A.0.562 and i have unlocked bootloader and im stuck now please help :^)
Click to expand...
Click to collapse
flash stock ics ftf via this guide. also may dl latest version of ics there. it will flash alls stuff including kernel
http://talk.sonymobile.com/t5/Andro...y-Bean-ICS-Ice-Cream-Sandwich-and/td-p/154389
bejunk said:
flash stock ics ftf via this guide. also may dl latest version of ics there. it will flash alls stuff including kernel
Click to expand...
Click to collapse
Will i lose my root if i do that?
TheRavenblue said:
Will i lose my root if i do that?
Click to expand...
Click to collapse
yes. (& personal data also, so make backup) but root is a easy job (1min) you can root phone with ''e-root'' app. btw if u plan to use custom rom , then no need to root it all custom rom/kernel is prerooted....
if not you can extract kernel & try flashing i manually..
bejunk said:
yes. (& personal data also, so make backup) but root is a easy job (1min) you can root phone with ''e-root'' app. btw if u plan to use custom rom , then no need to root it all custom rom/kernel is prerooted....
if not you can extract kernel & try flashing i manually..
Click to expand...
Click to collapse
I tried using e-root once and i got rooted but after a while i couldnt root :/ it was succesfull (i think) but superuser never showed up.
TheRavenblue said:
I tried using e-root once and i got rooted but after a while i couldnt root :/ it was succesfull (i think) but superuser never showed up.
Click to expand...
Click to collapse
i think you need to install superuser manually afet rooting with e root. (from playstore)

Categories

Resources