Hi, I have problem with ROM Arconium 3c with AROMA installer on my LT18i.
I have official androdid 4.0.4 with this kernel -> Stock ICS Kernel 4.1.B.0.431 with CWM 5.5.0.4 (http://forum.xda-developers.com/showthread.php?t=1680793).
My LT18i is rooted, bootloader is unlock, but the problem is: When I install mantioned ROM, I reboot my device, but mobile show me just SONY logo and that is all. Nothing more happens. Where is the problem?
Thank you for report !
re-flash kernel.
Can you enter cwm?
sinkster©
I re-flash kernel so many times. I do it with fastboot. I copy my kernel to fastboot folder (where I was unlocking bootloader). And then I open CMD in this folder (shift + right button on mouse) and type fastboot flash boot boot562v2.img and ENTER. Everything is OKAY.
I shut down my LT18i and power on again, and during booting press any key and enter do cmw. In cmw I do wipe data/factory reset and wipe dalvik cache and install my ROM from SD card.
I install rom with AROMA installer, where I check defaul install, chose my LT18i and Superuser and install. When installing finish, check reboot. After reboot my LT18i show me SONY logo and that is all. Sony logo is still on and nothing happens.
Sorry for my english. Thanks
did u try flashing other kernels? or try to flash stock kernel from official ftf file..
I try this kernel: http://forum.xda-developers.com/showthread.php?t=1680793 for LT18i v2.
After that I try this: http://forum.xda-developers.com/showthread.php?t=1591279
But I can not use kernel from oficial ftf file, isn't it? Cause kernel from oficial ftf file is without cmw, no? Or If I once ROOT my LT18i, cmw is there forever?
Becasue I update my android on 4.0.4 with flashtool. Then I use first one kernel and do ROOT. After that I flash baseband on 70 and install ROM.
Or give me a kernel what can I use.
My phone -> (Android 4.0.4, 2.6.32.9-perf [email protected]#1, 4.1.B.0.431) - official Android withou ROOT for now.
Can someone help me? please or tell me, which kernel I can use for Arconium 3c ! I want my LT18i stable, full working, without problem. SO SIMPLE !
Try doomlords ics kernel it works for me with arconium 3c
Sent from my LT15i using Tapatalk
which kernel? Give me link please
http://forum.xda-developers.com/showthread.php?t=1520654
Sent from my LT15i using Tapatalk
OK, Arconium 3c is going. I use Stock ICS Kernel 4.1.B.0.431 with CWM 5.5.0.4 [Max CPU Freq fix], baseband 70 and arconium 3c boot up. But I have another one problem. When I want to add widget on home screen, some of widget not show, or just show their silhouette (like digital clock or some toggles).
And when I connect my LT18i to PC (with USB) PC Companion not recognize my phone.
When I solve these two problems, everything will be OK. Thanks
Lukas7746 said:
OK, Arconium 3c is going. I use Stock ICS Kernel 4.1.B.0.431 with CWM 5.5.0.4 [Max CPU Freq fix], baseband 70 and arconium 3c boot up. But I have another one problem. When I want to add widget on home screen, some of widget not show, or just show their silhouette (like digital clock or some toggles).
And when I connect my LT18i to PC (with USB) PC Companion not recognize my phone.
When I solve these two problems, everything will be OK. Thanks
Click to expand...
Click to collapse
yea..even i get such widget problems especially with digi clock..wat i do is add widget,remove and again keep adding and removing till it works..i faced this problem only when i update the rom..
I decided to wait for Arconium v4 which will be available soon. I'm looking forward and hope, that in this version will be everything solved.
Related
Hello,
I have Arc S with Stok ICS 4.0.4, Build 4.1.B.0.431 , Kernel 2.6.32.9 and bootlodar open.
I want to Know, HOW i Install a Root At this Verison ?
One more thing I Cant run ane GAMELOFTE games, Why?
Use Search Tool There Are Planty of threads about This .
Well For GameLoft Games are working Fine. On stock Rom.
Or U can Flash Latest MooDDed ICS Rom From With Doom kernel v5 with Performance As Governor For. Best Gaming Experience.
ARCMAN [email protected] LT15i using Tapatalk 2
Go to superuser site and download the root. Put it in your sd. Go to dev selection. Find the thread "stock ics kernel with cwm. Download the right kernel. Put it in fastboot folder. Run fastboot. Type"fastboot boot *.img", where the * is the name of img file. When your phone starts automaticly press the volume down on blue led while booting up the phone. Select apply update from sd. Find the root zip you downloaded and install. When complete reboot
Tadaaa, stock with root.
Ps. If you want cwm then instsll the auto insaller from store
Typed down from the sky with sexy LT15i
hi
i flashed jb rom and it worked but when i wanted to flash another rom it shows me the same error (status 7)
i tried to flash the stock GB one but it doesnt boot
so my Q are:
1)do i have to flash GB firmware first
2)do i have to flash a GB kernal before flashing GB firmware or the turbo kernal v2.1 works??
i need a realyy fast help :crying::crying::crying::crying::crying::crying:
rashad543 said:
hi
i flashed jb rom and it worked but when i wanted to flash another rom it shows me the same error (status 7)
i tried to flash the stock GB one but it doesnt boot
so my Q are:
1)do i have to flash GB firmware first
2)do i have to flash a GB kernal before flashing GB firmware or the turbo kernal v2.1 works??
i need a realyy fast help :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Well you could always ftf to stock and just root and try again this will help with conflicts of old files and kernels and you can start fresh
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
crazymonkey05 said:
Well you could always ftf to stock and just root and try again this will help with conflicts of old files and kernels and you can start fresh
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
thnx alot
could u give me a working ftf for play r800i pleaaaaaaaase i tried one and it didnt work
here is a really good walkthrough by fma to do it...hope it helps and here is another guide to help you with any other flashing/moding questions you might have.
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
[Q] Need a good Kernel and Rom for xperia 800x
rashad543 said:
hi
i flashed jb rom and it worked but when i wanted to flash another rom it shows me the same error (status 7)
i tried to flash the stock GB one but it doesnt boot
so my Q are:
1)do i have to flash GB firmware first
2)do i have to flash a GB kernal before flashing GB firmware or the turbo kernal v2.1 works??
i need a realyy fast help :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
CM9.1 ZEUSC For r800x cdma has the kernel &CWM in it!!!! along with the rom !!so read below
Simple fix is stay away from JB roms they are still too new so you are going to run in to many bugs..etc Besides alot of people here treat the 800x like its a red headed step child here.
lucky for you i have bricked my phone many times and brought it back from the grave.
Step 1 is you bootloader unlocked? If yes. it doesnt matter what rom you have on it now. because you can do what you please with it.
Step 2 are you using flash tool? if yes flash Kernels first before flashing a rom
A good rom i recommend is Zeusc CM9.1 still has bugs but it is stable.
download it here Google get.cm then click Zeusc cm 9.1 is the latest stable release. also download Gapps Signed for Ics 4.04 Because you will need to put it on you SD card later along with the CM9.1 zip.
Step 3 download it and extract the boot.img file from it and then put a copy of the zip intact on your SD card. put your phone in USB MODE TO DO SO..
Step 4 open up flash tool . if you dont have it google "flash tool androxide".. it should be on Cnet make sure its the newest version...
Step 5 power your phone off... Go to my computer then C: drive look for flashtool click on drivers and install them for your phone. along with fast boot and flash mode... 3 total boxes to check... once installed move to step six
Step 6 plug you phone in VIA USB CORD while HOLDING THE SEARCH BUTTON . IF YOU DID IT RIGHT YOU SHOULD SEE A BLUE LIGHT.
Step 7 look at the logbox of flash tool is should say it detected your phone and display info. Click the LIGHTNING BOLT ICON( Flash Button)
then select fastboot mode.
next click "select Kernel to flash" button then select the boot.img file you extracted from the zip folder. earlier in step 3
if you did it correct it will flash the boot image to you phone along with the CWM recovery to you bootloader. once it says sucessful.
unplug your phone. hold the power button to reboot it when you see the free xperia logo come on hold the volume down button. till it goes in to recovery mode.
step 8 erase your "partitons" and "cache" then select "advanced" clean your "dalvik cache" too. next select install from zip folder then select the zip you want to flash. its the file that says cm9.1 zeusc. the file i told you to put on your SD card.
install it to your phone!!!! after that do not reboot until you flash the google apps zip on you sd card the same way you did the rom..
THEN ONCE YOU INSTALLED BOTH REBOOT YOUR PHONE FROM CWM RECOVERY BY SELECTING REBOOT FROM THE MENU.
NOW YOU SHOULD HAVE A FULLY WORKING ROM ON YOUR 800X
dONT FORGET TO THANK ME !!!
I just follow the steps and install from this thread
http://forum.xda-developers.com/showthread.php?t=1979829
ROM Installed
-downlaod ROM and extract it you can get JellyBean_V06.zip and boot_V06.img
-copy JellyBean-V06.zip to SDCARD
-Download LT18i 587 Stock ROM OR BASEBAND V77
-Flash stock rom OR BASEBAND V77 with Flashtool
-Flash boot_V06.img
-power on and enter CWM mode
choose install zip from sdcard and select JellyBean-V06.zip to install
-wait for install completed and re boot to enter ROM and use.
when i after flashing boot_V06.img. and try to open my phone,
my Arc just stuck at the SONY logo.
and I could only close my phone via removing the battery.
before installing this rom. my phone was in 4.1.B.0.431, rooted and unlocked.
plz, help me. i don't know what to do now..:crying:
Mate, i think you forgot to flash a jb kernel. Try to flash fusion, lupus or fxp kernel via flashtools or fastboot
btw, that rom is a little outdated, try superjellybean, racing bean or slim bean. I prefer superjellybean
Sent from my LT15i using birds.
TheHaso said:
Mate, i think you forgot to flash a jb kernel. Try to flash fusion, lupus or fxp kernel via flashtools or fastboot
btw, that rom is a little outdated, try superjellybean, racing bean or slim bean. I prefer superjellybean
Sent from my LT15i using birds.
Click to expand...
Click to collapse
Thx a lot, I solved this problem. :good:
yenjui said:
Thx a lot, I solved this problem. :good:
Click to expand...
Click to collapse
Use the thx button instead
Sent from my LT15i using birds.
After flashing fusion 4,5 kernel,cm10 rom 208 ver always return back fxp kernel after rebooting. Unchecked automatic restore in backup & restore.
Fxp kernel is good but i do not have root access
All CM ROMs are pre rooted. Reinstall the ROM if you want root back
sent via XPERIA™
Update/install from play store. CM Roms are prerooted as said over.
Sent from my LT15i using birds.
Thanks guys but what means "prerooted" .
I just cannot flash fusion kernel becouse cm10 return back fxp kernel when rebooting, and this hapens only with fxp208, this is first problem with this rom.
Second is that with fxp kernel I cannot have root access but if I flash fusion 4,5 I have.
Thanks in advance
Pre rooted means the ROM is rooted already.
As for your problem, can you list the steps you did to flash the kernels?
sent via XPERIA™
msc3169 said:
Pre rooted means the ROM is rooted already.
As for your problem, can you list the steps you did to flash the kernels?
sent via XPERIA™
Click to expand...
Click to collapse
step 1. flash fxp208 kernel
step 2.(wipe delvik, wipe cash) install cm10 208 from recowery I try to wipe after install rom same result
step 3. flash fusion 4.5 kernel
when I first boot fusion kernel is on, but first after I try to reboot device rom return fxp kernel
Ok I solved.
Problem is flashtool
This is not hapend if I flash kernel in command prompt "fastboot flash boot boot.img" but if I use flashtool always back previewsly installed kernel
Regards
hi
this is the first time i am trying to install a custom rom. after reading a lot i never tried to actualy modify my arc s, but today was the day!
i tried with this one: http://forum.xda-developers.com/showthread.php?t=1920207
now i have some specific questions to find out why i am getting a bootloop (screen gets black and shows "SONY" over and over again).
right now i am on stock rom and kernel again: model: LT18i / android 4.0.4 / kernel 2.6.32.9-perf [email protected] #1 / build 4.1.B.0.587
i followed the how-to in the thread in every step besides one: "For Locked Bootloaders: Root your phone using this tutorial, than install CWM using this app" i did not use the linked tutorial because at first i just wanted root and found this "one click" method: http://forum.xda-developers.com/showthread.php?t=2219711
this method worked for me and i already was able to use superuser. having a working superuser app i decided to go on with the tutorial and used x-parts to install CWM.
after that i did everything like in the how-to, going through the aroma installer, successfully installed the rom, reboot through the recovery menu -> bootloop.
after many hours and tries i decided to open a thread and hope that someone can help me to solve my problem.
thanks!
EDIT: about the bootloader. on my device it says "bootloader unlock allowed: yes" and the number that is mentioned here: http://forum.xda-developers.com/showthread.php?t=2375463 for me is 12W20
can i unlock the bootloader or not? i am realy confused with everything right now...
genesis86 said:
EDIT: about the bootloader. on my device it says "bootloader unlock allowed: yes" and the number that is mentioned here: http://forum.xda-developers.com/showthread.php?t=2375463 for me is 12W20
can i unlock the bootloader or not? i am realy confused with everything right now...
Click to expand...
Click to collapse
Yes, you can still unlock the bootloader, by using the official method at unlockbootloader.sonymobile.com.
thanks for your reply. in the roms thread it says that it can be installed with locked bootloader.
i have root and superuser works. next i used this: (imagine a link to google play x-parts :laugh to install cwm and then i continued with the how-to as it says:
...
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
any idea why i get a bootloop after installing the rom? oh...and i still don't get it how to start my phone directly in cwm recovery. i tried to push or hold different buttons. right now i saw the recovery menu only because i chose to reboot to recovery in the x-parts app. sorry, if similar questions have been already asked, but i don't get it
EDIT: is the kernel and/or stock rom a problem maybe? can i install the custom rom starting from: model: LT18i / android 4.0.4 / kernel 2.6.32.9-perf [email protected] #1 / build 4.1.B.0.587?
Did you flash this? I never tried install any kernel or ROM on locked bootloader, so my phone is unlocked. I read this tutorial and i succesfully installed this ROM on my ARC without bootloop. BTW i using LuPuS v16 kernel, not vengeance...
genesis86 said:
thanks for your reply. in the roms thread it says that it can be installed with locked bootloader.
i have root and superuser works. next i used this: (imagine a link to google play x-parts :laugh to install cwm and then i continued with the how-to as it says:
...
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
any idea why i get a bootloop after installing the rom? oh...and i still don't get it how to start my phone directly in cwm recovery. i tried to push or hold different buttons. right now i saw the recovery menu only because i chose to reboot to recovery in the x-parts app. sorry, if similar questions have been already asked, but i don't get it
EDIT: is the kernel and/or stock rom a problem maybe? can i install the custom rom starting from: model: LT18i / android 4.0.4 / kernel 2.6.32.9-perf [email protected] #1 / build 4.1.B.0.587?
Click to expand...
Click to collapse
Flash stock again
Root
And try again
Do a full wipe i.e wipe data, battery stats, and system then flash again, plz pick right options in aroma like locked bootloader, and then untick reboot in aroma and reboot thru CWM
Sent from my LT18i
HUD 4.0 boot loop on xperia arc s
Hi,
I have same problem, when I upgrade my xperia arc s from UHD 3.0.2 to 4.0 I get boot loop.
I have locked boot loader and UHD3.0.2 installs fine and don't get any boot loop. I tried both option upgrade and complete install for UHD 4.0 but no luck.
Any one can help me out?
thanks
imcupid said:
Hi,
I have same problem, when I upgrade my xperia arc s from UHD 3.0.2 to 4.0 I get boot loop.
I have locked boot loader and UHD3.0.2 installs fine and don't get any boot loop. I tried both option upgrade and complete install for UHD 4.0 but no luck.
Any one can help me out?
thanks
Click to expand...
Click to collapse
Tried full wipe? Which phone, kernel? If ARC or ARC S, try flash .ftf file, kernel and try install UHD 4.0. Look my previous post in this thread.
Sahaab said:
Flash stock again
Root
And try again
Do a full wipe i.e wipe data, battery stats, and system then flash again, plz pick right options in aroma like locked bootloader, and then untick reboot in aroma and reboot thru CWM
Sent from my LT18i
Click to expand...
Click to collapse
thanks for trying to help. after doing the same thing over and over again i decided to try a different rom and it works. i just wiped everything you need to wipe for installing a new rom and i am now on jelly dream 4.5 and the kernel from the step by step tutorial (Kernel_Vengeance_Ayame.zip).
offtopic: i could not find a support thread for jelly dream and i can't post in the mainthread. is there a q&a thread for this rom or should i open a new topic?
Kepta Duona said:
Tried full wipe? Which phone, kernel? If ARC or ARC S, try flash .ftf file, kernel and try install UHD 4.0. Look my previous post in this thread.
Click to expand...
Click to collapse
thanks for the tft file, I flashed that one and after install UHD 4.0. It worked fine.
thanks for helping me out.
Hiii
You can use the Flashtool Version 0.9.11.0 [Thanks to Androxyde :good:]
There are things in this application. Include: Root device, Bootloader Unlock, Flash kernel and Flash ROM.
By fastboot mode in Flashtool you can install any kernel and after turn on your device using CWM and install any ROM.
In here you can find many ROMs and Kernels [Thanks to Xerxin :good:]