Related
Anyone mind giving me a link to downloading only the 803.pit file?
I have seen it on the forums, but then its only downloadable with another firmware, my internet data bundle won't last if I download that too!
Thanks in advance!!
here it is!
https://www.wuala.com/Samsung Galaxy S/Firewares , Updates and Odin/Odin & .PIT/?key=AfzUZSU4SpKU
Thanks to Darkstriker (http://forum.xda-developers.com/showthread.php?t=723596)
here you have it
Edit: too slow
At least, no one will say XDA members lack the will to help
it would also have been the first hit on google.
trasig said:
it would also have been the first hit on google.
Click to expand...
Click to collapse
Actually, it's not : http://www.google.dk/search?hl=da&c...=pit+803&btnG=Søg&aq=f&aqi=&aql=&oq=&gs_rfai=
Thanks Mopral, and everyone else who posted ^^
First time I'm flashing my i9000, so just making sure I'm following everything step by step!
Then surely you shouldn't be using a PIT at all?
dirk1978 said:
Then surely you shouldn't be using a PIT at all?
Click to expand...
Click to collapse
Froyo isn't available through Kies yet in SA, only in the next week or two
So I've decided to skip the wait and flash with the latest I9000XWJPA firmware, apparently the 803.pit is required, as well as re-partition with the 512.pit with the I9000XWJM8 firmware. Perhaps I'm making a mistake, terribly new to Android
For reference all PIT files and most known firmwares are available from www.samfirmware.com.
Ah, PIT files are only partition information templates for Odin to move the sizes of the internal device partitions around. Everyone should just be using the 512 PIT now as the others were just development hacks. You will already have the 512 layout so there's no reason to even load it into Odin, always just let it flash without repartitioning.
But if you're not sure, then follow the samfirmware instructions, it's making you use the 512 PIT anyway, the 803 being loaded into Odin but repartition not being ticked does nothing.
Arkane316 said:
Froyo isn't available through Kies yet in SA, only in the next week or two
So I've decided to skip the wait and flash with the latest I9000XWJPA firmware, apparently the 803.pit is required, as well as re-partition with the 512.pit with the I9000XWJM8 firmware. Perhaps I'm making a mistake, terribly new to Android
Click to expand...
Click to collapse
You don't need a pit or I9000XWJM8, what you need is to flash directly CODE as PDA, MODEM as PHONE and CSC as CSC...no repartition.
If you must re-partition then use 512.pit and these files from here:
http://forum.xda-developers.com/showpost.php?p=8911755&postcount=83
You need the first download and only one of the three CSC files(I recommend XEE).
Extract once using 7-zip, then load the files as I wrote earlier and PIT as 512.pt and check Re-partition.
[Ramad] said:
Actually, it's not : http://www.google.dk/search?hl=da&c...=pit+803&btnG=Søg&aq=f&aqi=&aql=&oq=&gs_rfai=
Click to expand...
Click to collapse
Actually it is. Just dont use weird localized google. google.COM is there for a reason.
dupel said:
Actually it is. Just dont use weird localized google. google.COM is there for a reason.
Click to expand...
Click to collapse
Hi
I there a reason for you to act as a policeman in this forum?
You are flashing the below at YOUR OWN RISK
This is only for the Euro version, at&t version, T-mobile version or any other GSM version of the Tab. this is NOT for any CDMA version.
This is a new Tab firmware that just leaked out (P1000XXJM6)
So far the know pros are:
1) THE BROWSER IF FINALLY FIXED! it is very smooth even with flash. i am very impressed.
2) Users are reporting new widgets.
3) The drop down drawer is smoother.
4) New readers hub
5) tweaked email client
6) better camera focus?
7) ROM feels very smooth.
Update 11/29/2010
This is an updated package which should be safer to flash via Odin.
All credits are going to Richthofen who compiled this package for us.
As it seems that original package posted in this thread was not intended to be flashed via Odin.
Samsung has introduced a new FW programming method which also supports the upcoming phones. I don´t know if it is already supported by the newest Kies version.
The new format is basically the same as Odin only smarter with a few tricks and more stable.
Richthofen has prepared a new package for us that is flashable via Odin and should work much better with less problems.
Below are the download links and instructions for everything you need to flash P1000XXJM6.
1) Download the the file HERE and extract the it
2) Inside the ZIP you will find Odin 1.7 + PIT file + PDA +Modem + CSC files.
3) Open Odin, select the PIT file + PDA + Modem + CSC into their respective places.
4) Make sure repartition is CHECKED.
5) put the phone in download mode and connect it to your computer. start flashing.
6) The device will reboot. If you are getting tons of FC's on boot, reboot into recovery and do a factory reset.
Done.
** You can root using SuperOneClick method. Other methods do not work at this time.
**If you are on at&t and using the at&t model, please reflash the Bell modem to gain 850Mhz back.
clubtech said:
Please be advised that i have not yet tested this firmware so i don't know if it works and i am not responsible if it bricks your Tab!!!
The brave ones are welcome to try and report back.
It was originally labeled as P1000XXJM9 on the Samsung FUS server however it looks like it is P1000XXJM6.
Download: http://www.multiupload.com/OO6CWYBQYN
Release date: 11/25/2010
Flash: latest Odin with no repartition (as this does not look like it is a full flash). No PIT file needed as it is not a full flash.
Click to expand...
Click to collapse
Taking one for the team here, flash failed, Tab totally unresponsive.
Sorry it failed.
can u detail the below please:
- what is your tab model?
- are u still able to into download mode to flash to a working firmware ?
- are u sure you did not select repartition when flashing?
clubtech said:
Sorry it failed.
can u detail the below please:
- what is your tab model?
Bell Tab running P1000XXJK5
- are u still able to into download mode to flash to a working firmware ?
Unable to boot, access recovery or download mode, screen black, computer and Odin do not recognize cable connection.
- are u sure you did not select repartition when flashing?
Click to expand...
Click to collapse
Did not repartition.
just flashed, browser MUCH better , smooth scrolling on engadget .
You need to flash dbdata from this post:
http://forum.xda-developers.com/showpost.php?p=9305891&postcount=1
Can u detail exactly how you flashed this?
Which Odin version ?
Repartirion or not?
Which tab model do you have ?
also new widgets, new notes in browser
flashed with odin 1.7 , no repartition. After flash tab reboot in download mode again.
Flashed again but only dbdata .
cezarc1 said:
flashed with odin 1.7 , no repartition. After flash tab reboot in download mode again.
Flashed again but only dbdata .
Click to expand...
Click to collapse
Thanks.
I wonder why user above you bricked then.
Which version of the tab are u using? The euro one or something else?
euro version
Gonna try flashing this firmware
So just to confirm, it's only partial yes?
Thanks
risq said:
Gonna try flashing this firmware
So just to confirm, it's only partial yes?
Thanks
Click to expand...
Click to collapse
Correct. Let us know the resutls and exactly how you flashed and Odin version used and your tab version.
cezarc1 said:
just flashed, browser MUCH better , smooth scrolling on engadget .
You need to flash dbdata from this post:
http://forum.xda-developers.com/showpost.php?p=9305891&postcount=1
Click to expand...
Click to collapse
can you run acid3 test, is the result still 93/100? Thanks.
http://acid3.acidtests.org/
Sent from my GT-P1000 using Tapatalk
Ok,
Got the latest version installed by flashing the latest update with odin, then flashing dbdata.rfs afterwards....
only thing is, it's now causing launcherpro and other apps to force close, so I'm going to re-flash JJ4 / JK5 clean then re-apply this update.
antz88c said:
can you run acid3 test, is the result still 93/100? Thanks.
http://acid3.acidtests.org/
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Still 93/100
im guessing its not from samfirmware?
JM is kinda weird since on samsung code JM means J = 2010 and M = 13th month which is ......
K is november and L should be the latest one >.< (december)
where did you get this one anyway?
Ok - got it back to life....re-flashing now
cezarc1 said:
Still 93/100
Click to expand...
Click to collapse
But is the browser really smoother ? Even after you restored all your apps?
clubtech said:
It was originally labeled as P1000XXJM9 on the Samsung FUS server however it looks like it is P1000XXJM6.
Click to expand...
Click to collapse
Check this post for more info about recent releases:
http://forum.xda-developers.com/showpost.php?p=9422970&postcount=4
"JM" is weird...the dates don't make sense.
risq said:
Ok - got it back to life....re-flashing now
Click to expand...
Click to collapse
How did you get it back to life?
Sent from my SGH-T849 using XDA App
hello everyone,
Must say without alot of your great posts and walkthroughs i wouldn't of even considered the wicked things my little Gio can do. But i have seem to always have 1 problems when flashing my cell.
I get a "No Service" after 6 hours and can never get it to pick up my Virgin Sim card. I have tried GioPro 1.2 to 1.6, CyanogenMod 7 and 9 and even some Europe firmwares that are supposedly work with it.
So i am assuming that alot of these firmswares/roms don't work with Canada services or phones/areas or is this a common glitch in custom roms. Any help or direction on fixing a issue like this would be more then amazing right about now.
thank you all for your time
Vaughn
after flashing gioprio, it also flashed your baseband. flash a stock rom based for the m model, or flash a baseband only, wich is for the M mode, and you're fine
voetbalremco said:
after flashing gioprio, it also flashed your baseband. flash a stock rom based for the m model, or flash a baseband only, wich is for the M mode, and you're fine
Click to expand...
Click to collapse
i have never thought of that, thank you so much. I will report back with my results!
ok this is where you guys start to hate me, tried figure out where to locate a stock baseband and i got a one package for giopro 1.0 (GioPro_v1.6.tar) and my stock firmware for bell/virgin phone (GT-S5660M_BMC_S5660MUGKG3_S5660MUGKG3_S5660MBMCKG3.tar) and finally my GIO_v1.0.ops.
but where about do i locate a stock baseband for the 5660m or am i replacing one files from the stock firmware (GT-S5660M_BMC_S5660MUGKG3_S5660MUGKG3_S5660MBMCKG3.tar) to the GioPro custom (GioPro_v1.6.tar),
i hate to be that guy but i been battling this for a few weeks.
voetbalremco said:
after flashing gioprio, it also flashed your baseband. flash a stock rom based for the m model, or flash a baseband only, wich is for the M mode, and you're fine
Click to expand...
Click to collapse
Can you flash a ROM to get European 3G frequencies with a Canadian phone?
I could compile a .tar.md5 of the S5660MUGKG3 Baseband only if you want?
(Flash it through Odin)
Because I have a GT-S5660M model also, so I always keep a backup of Stock Rom in my PC.
SUCESS! for now that is.
I was able to create a AMSS only .tar for flashing using Cygwin Terminal and this command
cd /cygdrive/c/baseband
tar -xvf S5660MUGKG3_S5660MUGKG3_S5660MBMCKG3_home.tar amss
tar -H ustar -c amss > S5660M AMSS.tar
Click to expand...
Click to collapse
then was able to flash just the one package, seems to have left the other parts of the GioPro Rom installed.
Vaughn Whiskey said:
SUCESS! for now that is.
I was able to create a AMSS only .tar for flashing using Cygwin Terminal and this command
then was able to flash just the one package, seems to have left the other parts of the GioPro Rom installed.
Click to expand...
Click to collapse
Yup! What I was going to do!
Peteragent5 said:
I could compile a .tar.md5 of the S5660MUGKG3 Baseband only if you want?
(Flash it through Odin)
Because I have a GT-S5660M model also, so I always keep a backup of Stock Rom in my PC.
Click to expand...
Click to collapse
Can this method be used to enable European 3G frequencies on the Gio?
Was having the same issues as OP - then realized I incorrectly flashed to 2.3.6 (for the 5660), now I'm trying to get back to stock 5660M 2.3.4 after downloading the S5660MUGKG3_S5660MUGKG3_S5660MBMCKG3 hotfile from droidangel - problem being it isn't a one file md5/tar... the rar contains like 9 files, image files and rfs. I've attached the rar contents.
View attachment 1132111
How do I use these files?? If it's not possible, does anyone have a lead on a one file for the stock 5660M 2.3.4 from Canada?
fyi, unrooted, unlocked
Thanks in advance
sob.... thought I had figured it out, went to samfirmware, got excited - their file was a different size from the droidangel...unfortunately same garbage, same list of image & rfs files instead of a single md5/tar
---------- Post added at 10:16 PM ---------- Previous post was at 09:53 PM ----------
what a jackass I am
I'm only posting this because I have a low level of shame and I noticed a few others while googling who were having the same problem as me..hopefully this helps them
the solution and why i'm a jackass = i was unraring the tar file..hence the contents (image, rfs etc) which were not useable by odin
i was selecting the wrong file... trying to use odin to select one of the files inside the tar... after uncompressing the tar....
brutal... anyway, hopefully this helps others
Help!
Okay guys, Heres my problem... And I need guidelines because im new to all this. I installed the fake ics on my phone and because it started to limit what I could do on my phone I decided to go back to android 2.2. I used odin to go back but I think i selected the wrong Rom for my network and where I live. I live in Canada and I use Virgin mobile as my network. Now that I got Android 2.2 back I never get any network! How do I flash a new Baseband Version? and Where do I get the Baseband version for Bell/Virgin? Also If you could give me the download for The Official Android 2.2 rom and not a custom one.. it would be nice =)
It's going to be 2.3 (Gingerbread) and not 2.2 (Froyo) that you'll want to install.
There have been multiple posts and you should just have used the search function, then asked whatever questions you might have had left.
Get the MUGK3 stock ROM from here or samfirmware, flash it with Odin.
Again, simple, beginner stuff for which there are multiple tutorials. The search function is your friend.
Darkshado said:
It's going to be 2.3 (Gingerbread) and not 2.2 (Froyo) that you'll want to install.
There have been multiple posts and you should just have used the search function, then asked whatever questions you might have had left.
Get the MUGK3 stock ROM from here or samfirmware, flash it with Odin.
Again, simple, beginner stuff for which there are multiple tutorials. The search function is your friend.
Click to expand...
Click to collapse
So I found one on samfirmware but its MUGKG3? Is that fine or different? and where on xda forums can i download the 2.3 gingerbread non custom for canada ( bell)?
Sobey2012 said:
So I found one on samfirmware but its MUGKG3? Is that fine or different? and where on xda forums can i download the 2.3 gingerbread non custom for canada ( bell)?
Click to expand...
Click to collapse
Yeah it's that --> MUGKG3
If you are on EXT4, don't use it with ODIN. It'll bootloop your phone.
It's fine if you're on a RFS filesystem
Peteragent5 said:
Yeah it's that --> MUGKG3
If you are on EXT4, don't use it with ODIN. It'll bootloop your phone.
It's fine if you're on a RFS filesystem
Click to expand...
Click to collapse
Lol Im new to android, Whats ext4 and RFS? And What else instead of odin can do it with? also I have the GT-S5660, NOT THE GT-S5660M so does it make huge difference?
Sobey, I got your message, but really this is the sort of discussion best kept in the thread. If you got your phone from VMC, it's a 5660M. In fact, a GT-S5660 would not work with Virgin at all.
Peteragent5: He could flash the whole stock MUGKG3 ROM with Odin and reformat /cache and /data with the stock recovery.
Darkshado said:
Sobey, I got your message, but really this is the sort of discussion best kept in the thread. If you got your phone from VMC, it's a 5660M. In fact, a GT-S5660 would not work with Virgin at all.
Peteragent5: He could flash the whole stock MUGKG3 ROM with Odin and reformat /cache and /data with the stock recovery.
Click to expand...
Click to collapse
But in About Phone it says GT-S5660 but ill trust your word. So I should download the Mugkg3 rom and use odin to get it into my phone? and do empty cache and data? Okay ill try this now and let you know if it works. I need your help with one more thing, Last time i used odin I followed a tutorial for where to put each file in which odin slot such as BOOT, PHONE, PDA, etc etc. Can you tell me which file needs to go in which slot? Or is it one package and I just click open package? Sorry man for asking to many questions but itll really help. Also I cant find the ops file!
Peteragent5 said:
Yeah it's that --> MUGKG3
If you are on EXT4, don't use it with ODIN. It'll bootloop your phone.
It's fine if you're on a RFS filesystem
Click to expand...
Click to collapse
doesnt that mean after installing anyvustom rom that uses ext4 you cant use odin any more?!
definetely isnt true, otherwise you could never use odin any moreafter rom flash
Sobey2012 said:
But in About Phone it says GT-S5660 but ill trust your word. So I should download the Mugkg3 rom and use odin to get it into my phone? and do empty cache and data? Okay ill try this now and let you know if it works. I need your help with one more thing, Last time i used odin I followed a tutorial for where to put each file in which odin slot such as BOOT, PHONE, PDA, etc etc. Can you tell me which file needs to go in which slot? Or is it one package and I just click open package? Sorry man for asking to many questions but itll really help. Also I cant find the ops file!
Click to expand...
Click to collapse
You could make the "About Phone" model string say anything by editing the proper file. As I've said before: if your Gio worked with Virgin Mobile Canada at all, it a 5660M. The Europe/Asia 5660 doesn't have the proper HSPA bands.
Look up the differences between the different Gio models. Now. Use the search function.
There's also one or two tutorial threads here with both Odin 4.42 and the GIO_v1.0.ops file linked.
The stock rooted ROM I uploaded a while ago, as well as the OEM one from samfirmware.com are usually the "one package" kind. If you're unsure, open the tar (or tar.md5) file with a proper archiving program (7-Zip works well and is free open-source) and have a look. There should be many files, including but not limited to: amss, arm11boot, mibib, oemsbl, qcsbl, boot.img, recovery.img and system.rfs.
Quick recap:
Flash the MUGK3 ROM with Odin.
If the phone bootloops, got in the stock recovery and do a factory reset, in other words, reformat the partitions.
Done!
Hey guys,
i am new to this forum, having changed to ace 2 from my old lg p500 optimus one. and i was wondering if i can flash pre rooted firmware with odin on my phone, which is bought in singapore. i read from the Flashing Guide by kyrillos13 here that
kyrillos13 said:
If you have OXX csc in your firmware (most of central-eastern Europe does; you can check by typing *#1234# and looking at the CSC - I8160OXXxxx), feel free to flash it on top with Odin, it will not wipe your data.
Click to expand...
Click to collapse
well, my phone has OLB csc, baseband is XMA1. so can my i flash my phone with odin and prerooted stock firmware without wiping data or anything? help will be appreciated.
if i left out any info please tell.
Yes you can flash prerooted firmware without whipping
Follow this guide : forum.xda-developers.com/showthread.php?t=1881964
OsamaGhareeb said:
Yes you can flash prerooted firmware without whipping
Follow this guide : forum.xda-developers.com/showthread.php?t=1881964
Click to expand...
Click to collapse
Um well, thanks for the reply, but i might have considered that particular method if i wasnt schooling right now. Besides, i dont fancy installing a linux distro on my laptop anytime soon. So.. Any other less time consuming or simpler ways to go about it?
PokMahPok said:
Um well, thanks for the reply, but i might have considered that particular method if i wasnt schooling right now. Besides, i dont fancy installing a linux distro on my laptop anytime soon. So.. Any other less time consuming or simpler ways to go about it?
Click to expand...
Click to collapse
Hey, I am not 100% sure but I think that it would change your CSC, meaning you would no longer have Samsung Kies support. I think that is about it, BUT I may be wrong. Perhaps if you post in kyrillos13's guide, he might be able to help, or at least give his opinion! Good luck!
First, if you are rooted now, grab your CSC files. If you have Cygwin this would have been easier..
Then you can flash prerooted firmware using Odin. (Just download the ones on the thread, its lost in the pages)
Then, after flashing, if you want to flash a deodexed ROM, place the CSc files inside the ROM's zip. And you won't lose your CSC.
But im not rooted yet.... ;(
GT-I8160 DXMA1 XSP prerooted
After download extract files then open Odin and select system_rooted.tar.md5 as PDA, and csc.tar as csc.
Check: Auto reboot and F. Reset Time.
Now hit Start..
OsamaGhareeb said:
GT-I8160 DXMA1 XSP prerooted
After download extract files then open Odin and select system_rooted.tar.md5 as PDA, and csc.tar as csc.
Check: Auto reboot and F. Reset Time.
Now hit Start..
Click to expand...
Click to collapse
thanks. btw, what does XSP stand for? please dont mind me asking haha but im kinda noob in these areas
OsamaGhareeb said:
GT-I8160 DXMA1 XSP prerooted
After download extract files then open Odin and select system_rooted.tar.md5 as PDA, and csc.tar as csc.
Check: Auto reboot and F. Reset Time.
Now hit Start..
Click to expand...
Click to collapse
and does it wipe data? isit tested
It's for Saigapore area and other countries
It's not tested
And all data remain
Hello people, I am new putting together posts, so I apologize if this should not go like this. Install a custom rom and now I would like to go back to how it was before. I am not sure what I have to look at, or The firmware that I have to download. Thank you very much and greetings.
Flash by odin
LucasUruguay said:
Hello people, I am new putting together posts, so I apologize if this should not go like this. Install a custom rom and now I would like to go back to how it was before. I am not sure what I have to look at, or The firmware that I have to download. Thank you very much and greetings.
Click to expand...
Click to collapse
Go find your latest firmware and download it, extract, open odin, put extracted files to BL AP SC CSC then strat flash
Ed15121998 said:
Go find your latest firmware and download it, extract, open odin, put extracted files to BL AP SC CSC then strat flash
Click to expand...
Click to collapse
perfect. I'm looking for any Android 10 firmware and that's it, right? and then use Odin
ha789di said:
Flash by odin
Click to expand...
Click to collapse
Yes, I know I have to flash for Odin. the issue is that I'm not sure which firmware I have to download haha
You have to download the stock firmware, I use samfirm.js you can use other tools though, when you donwload it, you should see 5 MD5 files, you need only 4 of them, the AP, BL, CP and CSC files. Flash them according to their name using odin.
LucasUruguay said:
Yes, I know I have to flash for Odin. the issue is that I'm not sure which firmware I have to download haha
Click to expand...
Click to collapse
[GUIDE] How to downgrade to Android 9
Make backups! Go to Settings - About Phone - Software information, and under 'Service provider SW ver.' you will see something like : '..._SM_A505FN_OXM_LUX_QQ..... etc...' The important thing is a: the model number, in my case A505FN and b...
forum.xda-developers.com