TyTN II with Android running under water (Gin + Tonic) - Tilt, TyTN II, MDA Vario III Android Development

Hi folks, here is some demonstration how-good is the Kaiser, with latest Scoot's Gingerbread ROM keeps running under this:
http://www.youtube.com/watch?v=chAY0ifSp1U
Just an amazing device!

how-good is the Kaiser in what sense? Smoothly running android or waterproofing?

Related

[Q] Most stable release of droid for blackstone

I've tried
Link: Froyredux-Port Latest Release 02-08-2010 (Base: RC2 Nightly NEW BUILD * NEW INSTALLER)
and
Go to first new post
Android 2.2 (FroYo) On HTC [30 July 2010] (V1.2)
None worked that great, could use the phone in the 02-08 release, but it crashed after the person on the other end picked up the phone, and on the other one it didnt even find a network (Tried both 3g and 2g).
Which version is the most stable? I do not need 2.2 of Android, a 1.6 version is OK if its stable.
Thanks in advance, Anders
CyberVillain said:
I've tried
Link: Froyredux-Port Latest Release 02-08-2010 (Base: RC2 Nightly NEW BUILD * NEW INSTALLER)
and
Go to first new post
Android 2.2 (FroYo) On HTC [30 July 2010] (V1.2)
None worked that great, could use the phone in the 02-08 release, but it crashed after the person on the other end picked up the phone, and on the other one it didnt even find a network (Tried both 3g and 2g).
Which version is the most stable? I do not need 2.2 of Android, a 1.6 version is OK if its stable.
Thanks in advance, Anders
Click to expand...
Click to collapse
Go for the Android 2.1 release, not the 2.2 (which states fairly clearly is a step backwards in order to eventually progress). The 2.2 releases are quite new and relatively unstable, and only suitable for geeks who like to scream, lose data and have nothing better to do than confirm the obvious (that it's unstable).
If you really want to be running XDAndroid for anything serious, then you're insane. It's suitable to play with, and reasonable satisfactory if it's plugged into a power supply. For business use? forget it.

Hey, Guys new to this. What's the Different between 1.6 rom or 2.2 rom.

Where can I get info on this. Or if someoone would explain the different. Thank you guys. Keep up the good work.
sprint htc touch pro 2
1.6 is Android 1.6 aka donut.
2.2 is Android 2.2 aka froyo.
You've heard of the different versions that Google puts out, right? Like this phone only has 1.6, the new 2.2 update is coming for x device, etc...
arrrghhh said:
1.6 is Android 1.6 aka donut.
2.2 is Android 2.2 aka froyo.
You've heard of the different versions that Google puts out, right? Like this phone only has 1.6, the new 2.2 update is coming for x device, etc...[/QUOTE
........so 1.6 android aka donut is faster or the 2.2 aka froyo is more advanced
sprint htc touch pro 2
Click to expand...
Click to collapse
tiad8 said:
arrrghhh said:
1.6 is Android 1.6 aka donut.
2.2 is Android 2.2 aka froyo.
You've heard of the different versions that Google puts out, right? Like this phone only has 1.6, the new 2.2 update is coming for x device, etc...[/QUOTE
........so 1.6 android aka donut is faster or the 2.2 aka froyo is more advanced
sprint htc touch pro 2
Click to expand...
Click to collapse
how much are you new too? 2.2 came after 1.6 so it would be better...not sure of the specifics
Click to expand...
Click to collapse
noodles21o2
how much are you new too? 2.2 came after 1.6 so it would be better...not sure of the specifics[/QUOTE said:
.......1- i just want to install a good build on my (touch pro 2 sprint). 2- noodles21o2 what build you using?. thank you
Click to expand...
Click to collapse
tiad8 said:
.......1- i just want to install a good build on my (touch pro 2 sprint). 2- noodles21o2 what build you using?. thank you [/QUOTE
i use the current one, check out reefer's sticky thread....i recommend using sovereignty's startup app
Click to expand...
Click to collapse
ok thanks. i will check it out

[Q] Gingerbread Rom for CDMA Desire?

Any chance of there being a 2.3 rom for CDMA devices anytime soon?
Me wonders too. Having issues with 2.2 and activesync. Hoping for good gingerbread rom to test with.

[Q] Problems with Virtuous Roms

Hello Guys,
Ive Got a Problem, thats why i'm here.
Ive got a Rooted HTC Desire Z (data under my Question)
and everytime I want to flash a Rom from VIrtous or with Virtous Basement
I get a Blackscreen at rebooting, other Roms are working (like CM9)
And because thats very weird I want to ask the Pro's
Data:
- Hboot-0.84.2000 (PC1011000)
- 4Ext Recovery System
Thanx Eddiegame
(and if theres a [Q] existing, it wouldnt help cauz my Cell is very crazy)
Edit: Actually, this is the Desire Z hboot...Have you tried flashing Sense ROM's or the ICS ROM they offer?
Jss i did flash nearly all Virtuous Roms, which are aviable
But none has been working... all Blackscreen.
Even Virtuous Sense 2.0.0?
I presume you have set up and have a grasp of how to use adb. If you haven't, look up a guide in our forum.
So, does adb recognize your device while it's trying to boot? (You can confirm this if you run "adb devices" ) If it does, what output are you getting when running "adb logcat"?
Sent from my DZ.
Jes i know how to use adb
and i tested with the Primadonna Rom
and it Said :
Code:
- waiting for device -
error: protocol fault (no status)
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
and the "error" is coming, when the blackscreen starts ...
hi, i am trying to flash the sense Android Revolution HD with HTC Sense 3.5 rom as posted by you on my G2 but it after installation it gets stuck at the htc boot screen, amazingly this happens with all sense 3.5 roms like CoreDroid v1.3, Virtuous Affinity etc. but roms like CM7 - PyroMod etc. are installed and run pretty ok(ok the andriod process keeps crashing while calling), could you put some light on the matter. i am new to this previously the g2 was running the mexdroid rom and i brought it online. i really want the phone to run HTC stock rom or similar coz i love the look and the feel of it. any guidance on the same would be greatly appreicated. cant post on the form coz i still dont have the rights to do so.'
TIA,
regards,
abhijeet
elpanyo quam
Dear mh09ad5578
Habe you tried the BlissSense ? Its the best one with 3.5 in my opinion the others did also not work for me so try this one:
http://forum.xda-developers.com/showthread.php?t=1485689
Eddiegame
I suggest against 3.5 entirely, it's way too bloated to run smoothly on our phones.
There's plenty of Sense 4.0 development. The ROM's we have right now are blazing fast and pretty much everything works, except for camera. Won't take long till we have fully functional Sense 4.0 ROM's.
So my advice is to stick with Stock (Virtuous Sense 2.0.0), until Camera works in Sense 4.0. Also, flash the Unity kernel, I have v9 on mediafire (can't find v10 right now).
Eddiegame, in case you haven't tried that ROM then please do. It's stock with Virtuous kernel/tweaks.
But my Problem is that virtousroms aren't working right now.
At the moment im at Glite, waiting for a fully working Sense 4.0a
so i will wait c:
mh09ad5578 said:
hi, i am trying to flash the sense Android Revolution HD with HTC Sense 3.5 rom as posted by you on my G2 but it after installation it gets stuck at the htc boot screen, amazingly this happens with all sense 3.5 roms like CoreDroid v1.3, Virtuous Affinity etc. but roms like CM7 - PyroMod etc. are installed and run pretty ok(ok the andriod process keeps crashing while calling), could you put some light on the matter. i am new to this previously the g2 was running the mexdroid rom and i brought it online. i really want the phone to run HTC stock rom or similar coz i love the look and the feel of it. any guidance on the same would be greatly appreicated. cant post on the form coz i still dont have the rights to do so.'
TIA,
regards,
abhijeet
Click to expand...
Click to collapse
Might need to flash the dz hboot. The system partition needs to be larger for many sense roms
Sent from my HTC Vision using xda premium

Android Revolution

So guys, I just ported over Android Revolution 6.0 from the Incredible S, and I was wondering if anybody was interested in it?
If not, I'll just dump it and work on something else
No clue what that is but I'll check it out. New stuff is always welcome here
Surely, I would be interested - two semi-retired but still alive & kicking DI2 doing prepaid GSM service.
I assumed this is an update & newer to AR HD5.3 that Moonmaster345 released in 2013, I just recently got time & chance to d/l & play, flashed it & running on the devices.
Yeah, this is 6.0
Sent from my Mako powered by PA

Categories

Resources