Related
hello,
I have installed XDandroid on my htc touch pro2. But i can't connect to my network (provider). I search for many days now, but i can't find any solution.
i have the manila version on my htc.
Thnx in advance.
dubbelr said:
hello,
I have installed XDandroid on my htc touch pro2. But i can't connect to my network (provider). I search for many days now, but i can't find any solution.
i have the manila version on my htc.
Thnx in advance.
Click to expand...
Click to collapse
#1 reason is probably the force CDMA command in the startup.txt. If you're CDMA, you need it to =1, if you're GSM you need it to =0. Check that & get back to us.
thnx for helping
that was the problem
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
swaters3 said:
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
Click to expand...
Click to collapse
startup.txt. Perhaps you need to read the FAQ my friend.
swaters3 said:
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
Click to expand...
Click to collapse
You are on Sprint, so Force CDMA=1. Also probably the number one reason you have no service is the SIM card is still in. Remove the SIM and re-try Android.
arrrghhh said:
startup.txt. Perhaps you need to read the FAQ my friend.
Click to expand...
Click to collapse
I read throught the faq and tried everything but it still doesnt connect. Im gonna download it again and try again.
thanks
demonlordoftheround said:
You are on Sprint, so Force CDMA=1. Also probably the number one reason you have no service is the SIM card is still in. Remove the SIM and re-try Android.
Click to expand...
Click to collapse
I have tried removing the sim card in the past and i tried again. now what happens is that with force cdma checked it keeps trying to connect and then disconnects 20 seconds later over and over. I try to access the wireless networks settings but because it keeps disconnecting it goes back so it doesnt have achance to search for wireless networks.
If i dont force cdma then nothing happens and when i search for wireless networks it just keeps and searching but nothing happens. any help would be appreciated.
So wifi has nothing to do with CDMA/GSM... Typically wifi gets hosed from people who update their zImage but not their modules - they go hand-in-hand and while you can run without the modules, stuff like wifi won't work at all.
arrrghhh said:
So wifi has nothing to do with CDMA/GSM... Typically wifi gets hosed from people who update their zImage but not their modules - they go hand-in-hand and while you can run without the modules, stuff like wifi won't work at all.
Click to expand...
Click to collapse
sorry i wasnt clear. i read through the faq and one suggestion is to go to settings and search for wireless networks meaning sprint atat etc. i actually do connect via wifi but i want to connect via sprint so i can use android as my operating system and play with it. any help would be appreciated.
swaters3 said:
sorry i wasnt clear. i read through the faq and one suggestion is to go to settings and search for wireless networks meaning sprint atat etc. i actually do connect via wifi but i want to connect via sprint so i can use android as my operating system and play with it. any help would be appreciated.
Click to expand...
Click to collapse
Ok you're still not being clear.
I assume your issue is you can't connect to the internet via the cell radio? Thru Sprint's network instead of wifi?
Can you make/receive calls? If so, data *should* just connect, assuming you're using relatively new stuff. A while ago you had to create an APN manually to connect, but that shouldn't be the case any more...
arrrghhh said:
Ok you're still not being clear.
I assume your issue is you can't connect to the internet via the cell radio? Thru Sprint's network instead of wifi?
Can you make/receive calls? If so, data *should* just connect, assuming you're using relatively new stuff. A while ago you had to create an APN manually to connect, but that shouldn't be the case any more...
Click to expand...
Click to collapse
i cant make phone calls. i can connect to wifi. any help would be app. thanks.
swaters3 said:
i cant make phone calls. i can connect to wifi. any help would be app. thanks.
Click to expand...
Click to collapse
Force cdma needs to =1 in your startup.txt CMDLINE section.
arrrghhh said:
Force cdma needs to =1 in your startup.txt CMDLINE section.
Click to expand...
Click to collapse
How do i access the force cdma. I use some sort of booting app that allows me to check or uncheck force cdma and to choose overclock speeds and update to newer versions. I dont see any place where i can access any stratup.txtThanks for your help. I would really love to try out android. Sprint wont let me update to any other smart phone but the tp2 (not that that is a bad thing) unless i upgrade my plan. I pay 5$ for unlimited data
swaters3 said:
How do i access the force cdma. I use some sort of booting app that allows me to check or uncheck force cdma and to choose overclock speeds and update to newer versions. I dont see any place where i can access any stratup.txtThanks for your help. I would really love to try out android. Sprint wont let me update to any other smart phone but the tp2 (not that that is a bad thing) unless i upgrade my plan. I pay 5$ for unlimited data
Click to expand...
Click to collapse
You don't want to know what I pay...
So I'm not sure how to explain this. Your startup.txt is a file you edit - where you run haret.exe from?
It sounds like you installed the cab, which unfortunately means you probably know nothing about how the system is put together, even at a high-level. Which is a shame...
With that said, assuming you're running v1.3 of the startup app, it should work fine. I cannot, and will not support that app. If you need support for that app, please go to sov's thread on the application.
If you want help on XDAndroid, then we can help... but we encourage you to search, read, research, search again, read some more, do a little more research, and then you may be ready to post. Maybe.
. .. fg
arrrghhh said:
You don't want to know what I pay...
So I'm not sure how to explain this. Your startup.txt is a file you edit - where you run haret.exe from?
It sounds like you installed the cab, which unfortunately means you probably know nothing about how the system is put together, even at a high-level. Which is a shame...
With that said, assuming you're running v1.3 of the startup app, it should work fine. I cannot, and will not support that app. If you need support for that app, please go to sov's thread on the application.
If you want help on XDAndroid, then we can help... but we encourage you to search, read, research, search again, read some more, do a little more research, and then you may be ready to post. Maybe.
Click to expand...
Click to collapse
can you direct me to where i can learn how to simply install android without the cab file. My research brought me originally to the cab file. I dint realize there was another way to install android.
Thanks for your help
swaters3 said:
. .. fg
can you direct me to where i can learn how to simply install android without the cab file. My research brought me originally to the cab file. I dint realize there was another way to install android.
Thanks for your help
Click to expand...
Click to collapse
There's CAB and RAR download's on Reef's download page...
arrrghhh said:
There's CAB and RAR download's on Reef's download page...
Click to expand...
Click to collapse
thanks for your help. I am in the middle of search and researching it.
Hopefuly ill get it to work.
What radio version do you have on your device?
gamescan said:
What radio version do you have on your device?
Click to expand...
Click to collapse
..
running stock sprint 6.5 update radio version 2.32.00wf. Please help me if you can im ready to give up. I am no expert just know how to download cab files and install them to my phone. Im very good at using the phone but not good at any type of programming. I do enjoy using all the great programs that have made the tp2 great and would love to use android without changing plans and moving from a resistive touc screen which i prefer.
thanks
Trying to reply to threads..getting the "failed to connect to forum contact admin if problem persists" error.
Every time.
Pissing me off.
Thoughts ?
n7/PRIME/m-kernel
theoctavist said:
Trying to reply to threads..getting the "failed to connect to forum contact admin if problem persists" error.
Every time.
Pissing me off.
Thoughts ?
n7/PRIME/m-kernel
Click to expand...
Click to collapse
report here http://forum.xda-developers.com/showthread.php?t=841646
maybe network issues? try clear data and restart phone once and see.. or connect to wifi and try..
theoctavist said:
Trying to reply to threads..getting the "failed to connect to forum contact admin if problem persists" error.
Every time.
Pissing me off.
Thoughts ?
n7/PRIME/m-kernel
Click to expand...
Click to collapse
Try wiping app data from settings.Else as Deadly buddy said report the error.
Deadly said:
report here http://forum.xda-developers.com/showthread.php?t=841646
maybe network issues? try clear data and restart phone once and see.. or connect to wifi and try..
Click to expand...
Click to collapse
Cant report it because of the error
Can someone help and report for me
n7/PRIME/m-kernel
Thread closed. You most likely forgot to wipe the app data.
Ok everyone. here is the fix for those stuck at Samsung logo after 5.1.1 update thanks to this person "Tuandung.tran". I had to go to a Vietnamese site and download the file that took me 7 hours to download, I had a hard time translating the site since it was in Vietnamese, so now I want to contribute and help others by saving them time with straight forward tutorial on how to fix the problem that they have.
Ok so here it is:
1) download this file and extract it to your PC ==========> https://mega.nz/#!vIEEBQyT!U5AzPE4iR3b5yUzdZ6rAT3AFXyCLq__4qiFTfkBupp0
2) go to recovery and delete system files and cache
3) go to download mode
4) open Odin on your PC and click AP to add AP_G925TUVU2COF6.tar that you extracted earlier to your PC
5) with Odin still open add BL_G925TUVU2COF6.tar by clicking BL button
6) click start
7) After Odin is finished, it will reboot your phone. just wait a few minutes and you'll be all set.
If this actually works there's going to be a whole bunch of people in line wanting to give you a kiss.
Pp. Lol.
samanbabah said:
Ok everyone. here is the fix for those stuck at Samsung logo after 5.1.1 update thanks to this person "Tuandung.tran". I had to go to a Vietnamese site and download the file that took me 7 hours to download, I had a hard time translating the site since it was in Vietnamese, so now I want to contribute and help others by saving them time with straight forward tutorial on how to fix the problem that they have.
Ok so here it is:
1) download this file and extract it to your PC ==========> https://mega.nz/#!vIEEBQyT!U5AzPE4iR3b5yUzdZ6rAT3AFXyCLq__4qiFTfkBupp0
2) go to recovery and delete system files and cache
3) go to download mode
4) open Odin on your PC and click AP to add AP_G925TUVU2COF6.tar that you extracted earlier to your PC
5) with Odin still open add BL_G925TUVU2COF6.tar by clicking BL button
6) click start
7) After Odin is finished, it will reboot your phone. just wait a few minutes and you'll be all set.
Click to expand...
Click to collapse
I will upload files to Mega or other AFH and create a topic in English, People encounter similar problems could see my method.
Sorry bad english
@Manh_IT, where do you want me to give a kiss Brother? Thanks, your work deserves retribution!!!
help
Atrix_Lover said:
@Manh_IT, where do you want me to give a kiss Brother? Thanks, your work deserves retribution!!!
Click to expand...
Click to collapse
hey guys!i need your advice im confused i unlocked my tmobile s6 edge from ebay via remote the guy used a z3x box,can i update to 5.1.1 some on xda say u can,what can i do if i get stuck on the logo will this help after that will i be lock again plz need your help.thanks
Ok let me explain what happendes to me, somebody fixed imei too for me, i updated to 5.1.1 and i got stuck on samsung logo, tried everything and no solution. i tried this method and now i'm using my S6 edge again, and i didnt loose imei, this is my experience
Atrix_Lover said:
Ok let me explain what happendes to me, somebody fixed imei too for me, i updated to 5.1.1 and i got stuck on samsung logo, tried everything and no solution. i tried this method and now i'm using my S6 edge again, and i didnt loose imei, this is my experience
Click to expand...
Click to collapse
my imei is clean and it show the same the guy who unlocked my device backed up my efs on my computer,im afraid i would be locked again,after you got stuck and got your phone back were you on 5.1.1 and unlocked or locked
skysky100 said:
my imei is clean and it show the same the guy who unlocked my device backed up my efs on my computer,im afraid i would be locked again,after you got stuck and got your phone back were you on 5.1.1 and unlocked or locked
Click to expand...
Click to collapse
I'm locked back again
Don't know how to unlock it back again!!!!!!!!!!!!!!!
@Manh_IT you saved my ass thank you so much. hey brother I have another problem, I can't download data anymore! I can listen to my voicemail, and send texts but no data connection! no internet connection.
samanbabah said:
@Manh_IT you saved my ass thank you so much. hey brother I have another problem, I can't download data anymore! I can listen to my voicemail, and send texts but no data connection! no internet connection.
Click to expand...
Click to collapse
Config APN ?
One thread is plenty I think. http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/how-to-to-5-0-2-t3142946?goto=newpost
assem_2222 said:
I'm locked back again
Don't know how to unlock it back again!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Now you need a imei unlock method, its more expensive 45 us, but its better, because you use a official Tmobile unlock app; i think this people put your imei in the Tmobile data base and make your phone eligible to permanently unlock. send mp to @Sunderwear
Manh_IT said:
Config APN ?
Click to expand...
Click to collapse
that did it! thanks
samanbabah said:
Ok everyone. here is the fix for those stuck at Samsung logo after 5.1.1 update thanks to this person "Tuandung.tran". I had to go to a Vietnamese site and download the file that took me 7 hours to download, I had a hard time translating the site since it was in Vietnamese, so now I want to contribute and help others by saving them time with straight forward tutorial on how to fix the problem that they have.
Ok so here it is:
Manh_IT do it not me
Click to expand...
Click to collapse
Just received the October security update today.
https://www.att.com/devicehowto/tut...tep_KM1127994?make=Samsung&model=SamsungN920A
It feels good to have updates every month even though it is just a security patch.
can u give me a link download, im not in US
My Note 5 is trying to download the update. When I started the update, almost immediately the WiFi connection was lost. I then get a message saying that the download will resume but it doesn't. When I turn off the WiFi, I'm able to connect to the Internet again. When I turn the WiFi on, I'm able to connect to the network for a few seconds until the software update resumes and then I'm back to the beginning of this cycle.
Anyone else having this issue or a suggestion?
Outside of the USA so am Attempting to DL with spiderbot agent in Google chrome using
https://xdmd.sl.attcompute.com/agents/48536/1488/SS-N920AUCU3CPHA-to-S3CPJ1-UP
Getting access denied but can DL an older one ok
Is the filename wrong ?
Update: got the file in the end with this link ...
https://xdmd.sl.attcompute.com/agents/48725/1488/SS-N920AUCU3CPHA-to-S3CPJ1-UP
kris4956 said:
My Note 5 is trying to download the update. When I started the update, almost immediately the WiFi connection was lost. I then get a message saying that the download will resume but it doesn't. When I turn off the WiFi, I'm able to connect to the Internet again. When I turn the WiFi on, I'm able to connect to the network for a few seconds until the software update resumes and then I'm back to the beginning of this cycle.
Anyone else having this issue or a suggestion?
Click to expand...
Click to collapse
Disregard, problem fixed itself.
the link broken, can u give a new link pls?
thien191189 said:
the link broken, can u give a new link pls?
Click to expand...
Click to collapse
Here is is : DOWNLOAD
File is inside of ZIP so you must unzip first if you want to use it.
tks, updated!!!
norbarb said:
Here is is : DOWNLOAD[/URL]
is this stuff for sideload? what about S3BPH4toCPHA?(
Click to expand...
Click to collapse
archer7rays said:
norbarb said:
Here is is : DOWNLOAD[/URL]
is this stuff for sideload? what about S3BPH4toCPHA?(
Click to expand...
Click to collapse
I'm sorry for late respond : PH4toPHA
Yes this are sideload files and this one just sideload as is. DO not unzip
Click to expand...
Click to collapse
dezborders said:
Outside of the USA so am Attempting to DL with spiderbot agent in Google chrome using
https://xdmd.sl.attcompute.com/agents/48536/1488/SS-N920AUCU3CPHA-to-S3CPJ1-UP
Getting access denied but can DL an older one ok
Is the filename wrong ?
Update: got the file in the end with this link ...
https://xdmd.sl.attcompute.com/agents/48725/1488/SS-N920AUCU3CPHA-to-S3CPJ1-UP
Click to expand...
Click to collapse
Can you tell me which agent do you use on spider-bot? I still can DL files from the server being outside US.
dashing_9508 said:
Can you tell me which agent do you use on spider-bot? I still can DL files from the server being outside US.
Click to expand...
Click to collapse
google spiderbot and I an I Scotland UK
dezborders said:
google spiderbot and I an I Scotland UK
Click to expand...
Click to collapse
Thanks a lot! It works.
Hello,
I have question about my phone which can't boot futher provider logo and it cant go to recovery mod (when i try it vibrates couple of times and phone just restarts). The phone has non-removable back side so i can't remove battery.
Please help.
markokolic said:
Hello,
I have question about my phone which can't boot futher provider logo and it cant go to recovery mod (when i try it vibrates couple of times and phone just restarts). The phone has non-removable back side so i can't remove battery.
Please help.
Click to expand...
Click to collapse
you need to use flashtool to flash stock rom
But now my mobile data doesn't work
Yeah,I've done that and it fixed my phone. but i can't activate my mobile data doesn't some reason. I read something about setting APN but i don't know how to do it. Do you maybe know reason why my mobile data doesn't work? Thank you.
But now my mobile data doesn't work
mbskylian said:
you need to use flashtool to flash stock rom
Click to expand...
Click to collapse
Yeah,I've done that and it fixed my phone. but i can't activate my mobile data doesn't some reason. I read something about setting APN but i don't know how to do it. Do you maybe know reason why my mobile data doesn't work? Thank you.
markokolic said:
Yeah,I've done that and it fixed my phone. but i can't activate my mobile data doesn't some reason. I read something about setting APN but i don't know how to do it. Do you maybe know reason why my mobile data doesn't work? Thank you.
Click to expand...
Click to collapse
you can connect wifi and go to setting to update the apn setting
But now my mobile data doesn't work
mbskylian said:
you can connect wifi and go to setting to update the apn setting
Click to expand...
Click to collapse
I can connect ti wi fi, but i don't know how to update APN settings(Xperia T3)
markokolic said:
I can connect ti wi fi, but i don't know how to update APN settings(Xperia T3)
Click to expand...
Click to collapse
now i am not use this phone .
i forget it .sorry
may in network setting
But now my mobile data doesn't work
mbskylian said:
now i am not use this phone .
i forget it .sorry
may in network setting
Click to expand...
Click to collapse
I'ts okey thank you anyway.
mbskylian said:
now i am not use this phone .
i forget it .sorry
may in network setting
Click to expand...
Click to collapse
good