Hello, i have firmware for s6102 and odin v1.85...now when i extract firmware for s6102 i get these files:
DefaultCalDataWithBoot_S6102XXKL8_REV02.tar
GT-S6102-MULTI-CSC-OXEKL8.tar.md5
MODEM_S6102XXKL8_REV02.tar.md5
PDA_S6102XXKL8_REV02.tar.md5
Should i select all these files and do i need to select pit and/or repartition to flash my phone?
Thanks
This is Galaxy Y's forum! Anyway, just select PDA, Phone and CSC. And leave all checkboxes default.
andrew21 said:
Hello, i have firmware for s6102 and odin v1.85...now when i extract firmware for s6102 i get these files:
DefaultCalDataWithBoot_S6102XXKL8_REV02.tar
GT-S6102-MULTI-CSC-OXEKL8.tar.md5
MODEM_S6102XXKL8_REV02.tar.md5
PDA_S6102XXKL8_REV02.tar.md5
Should i select all these files and do i need to select pit and/or repartition to flash my phone?
Thanks
Click to expand...
Click to collapse
basics;
place pda.tar.md5 to pda slot
modem.tar.md5 to phone slot
csc.tar.md5 to csc slot
please go to your device's section to get the appropriate help
As stated above :
place pda.tar.md5 to pda slot
modem.tar.md5 to phone slot
csc.tar.md5 to csc slot
Dont tick Repartition and dont select pit file..no need for these normally..
I got my answer..thanks everyone guys
hitme987 said:
As stated above :
place pda.tar.md5 to pda slot
modem.tar.md5 to phone slot
csc.tar.md5 to csc slot
Dont tick Repartition and dont select pit file..no need for these normally..
Click to expand...
Click to collapse
did the above posted post were in spanish that you posted it again ??
Lol
s6102 is a member of galaxy y familiy. most of applicable mod for sgy will work on s6102 too. except for the rom and kernel of course.
You can find a thread dedicated to Galaxy Y Duos in accessories section.
Related
I think this might have been asked randomly in the forum, but does anyone have the CSC & the Modem files for the DXJF4 firmware?
I can find the PDA for the DXJF4 on the internet, but just simply can't find the modem and CSC files.
Any help will be appreciated.
hydkrash said:
I think this might have been asked randomly in the forum, but does anyone have the CSC & the Modem files for the DXJF4 firmware?
I can find the PDA for the DXJF4 on the internet, but just simply can't find the modem and CSC files.
Any help will be appreciated.
Click to expand...
Click to collapse
Look here: http://samsung-firmware.webs.com/samsungi9000.htm?referer=AffiliateNetwork
hydkrash said:
I think this might have been asked randomly in the forum, but does anyone have the CSC & the Modem files for the DXJF4 firmware?
I can find the PDA for the DXJF4 on the internet, but just simply can't find the modem and CSC files.
Any help will be appreciated.
Click to expand...
Click to collapse
CSC and Modem are already included in the PDA file.
artronnie said:
CSC and Modem are already included in the PDA file.
Click to expand...
Click to collapse
So I can actually use the same PDA file as the modem and csc file as well?
Or do I have to extract the files in it out and re tar the archive?
hydkrash said:
So I can actually use the same PDA file as the modem and csc file as well?
Or do I have to extract the files in it out and re tar the archive?
Click to expand...
Click to collapse
read the flashing tutorial (PDF) published in samsung-firmwares carefully, Point #2, it stated that if PDA is the only file you have, you can flash it with that 1 single file, no further extraction is needed.
"Open in ODIN the flash files and the .PIT file (use PDA if you’ve got only one file inside the firmware)."
hydkrash said:
So I can actually use the same PDA file as the modem and csc file as well?
Or do I have to extract the files in it out and re tar the archive?
Click to expand...
Click to collapse
If I got your question correctly, then no. Don't extract the tar archive. Put the DXJF4 PDA file (AP_S1_PDA_DXJF4_CL363024.tar) on PDA, leave the phone and CSC section blank (don't put AP_S1_PDA_DXJF4_CL363024.tar on the phone and CSC section).
Also, I succeed in flashing DXJF4 using 513 pit. 512 didn't work at all.
artronnie said:
If I got your question correctly, then no. Don't extract the tar archive. Put the DXJF4 PDA file (AP_S1_PDA_DXJF4_CL363024.tar) on PDA, leave the phone and CSC section blank (don't put AP_S1_PDA_DXJF4_CL363024.tar on the phone and CSC section).
Also, I succeed in flashing DXJF4 using 513 pit. 512 didn't work at all.
Click to expand...
Click to collapse
Hey thanks artronnie, just what I was looking for. Just tested that and its all fine now.
Please can some1 provide me this file...
http://www.samfirmware.com/WEBPROTECT-i9000.htm
andrewluecke said:
http://www.samfirmware.com/WEBPROTECT-i9000.htm
Click to expand...
Click to collapse
the .rar file only contains CSC and PDA files... and after flashin there is no network as PHONE file is missing....
any suggestions please...
Just install any rom that have all these files and then using registry fix upgrade to the latest DDJG4 ROM which is far more better and stable..
am using the same ... after changing a lot of rom .. its the best i found for indian galaxies.. need more help .. do write dowm.
U can also directly install DDJG4 through ODIN.. it has all the files .... i never needed modem or csc file only pda and pit did the upgrade.
dewimagica said:
Just install any rom that have all these files and then using registry fix upgrade to the latest DDJG4 ROM which is far more better and stable..
am using the same ... after changing a lot of rom .. its the best i found for indian galaxies.. need more help .. do write dowm.
U can also directly install DDJG4 through ODIN.. it has all the files .... i never needed modem or csc file only pda and pit did the upgrade.
Click to expand...
Click to collapse
i get this error if i try to directly update DDJG4...
update media, please wait...
E:can't mount /dev/block/st110 (invalid argument)now
E:copy_dbdata_media:can't mount DBDATA:copy default media content failed.
ne proper way to be followed to flash the phone...
harshad_kp said:
i get this error if i try to directly update DDJG4...
update media, please wait...
E:can't mount /dev/block/st110 (invalid argument)now
E:copy_dbdata_media:can't mount DBDATA:copy default media content failed.
ne proper way to be followed to flash the phone...
Click to expand...
Click to collapse
Did you enable repartition checkbox while flashing via odin and did you use the 512.pit file? If I 'm not wrong ddjg4 is a single tar which has the pda, modem and csc. Select pda in odin and point to the tar file.
Sent from my GT-I9000 using XDA App
somberi said:
Did you enable repartition checkbox while flashing via odin and did you use the 512.pit file? If I 'm not wrong ddjg4 is a single tar which has the pda, modem and csc. Select pda in odin and point to the tar file.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i enabled repartition but still getin the same error.... do i have to format my phone b4 doin it.. m using XXJPC firmware currently and want to move back to the official one... please help...
JPC is a real pain ... has lot of bugs .. also it changes the product code to KOR after reading a lot i managed to get back my product code to INU ....
Try doing a factory reset and then flashing with ODIN with repartition on .... or use the registry hack method and upgrade to DDJG4 via kies.
first format ur internal sd card and then ur device and then try the method below
the rar file ddjg4 contains 2 files 1)add_odd and 2) dll file. , add_odd .. is a tar file just ignore the dll file...
1) open odin , tick the repartition ..
2) select the 512.pit file
3) select the add_odd as pda
4)remove the sim and the sd card
5) put the battery and the back cover
6) put ur device in the download mode
7) connect device to computer (using data cable)
8) click start
and i think you should be back to ddjg4
devabhishek said:
first format ur internal sd card and then ur device and then try the method below
the rar file ddjg4 contains 2 files 1)add_odd and 2) dll file. , add_odd .. is a tar file just ignore the dll file...
1) open odin , tick the repartition ..
2) select the 512.pit file
3) select the add_odd as pda
4)remove the sim and the sd card
5) put the battery and the back cover
6) put ur device in the download mode
7) connect device to computer (using data cable)
8) click start
and i think you should be back to ddjg4
Click to expand...
Click to collapse
thanks wil try and let u know the result...
sir i have download update for my sgy. after download complete i have open it with winRAR in pc i got only 2 file in it, one is in *.tar.md5 formate and another one is in *.dll .now i have selected *.tar.md5 as pda in odin and click on start and its fail to install... then again i have done but it alaways show fail...for more information i google it for solution but i didnt get usefull info. someone said to rename it to .tar i have done that too...but unsuccessful...so i thought that this file may be currupted so again i have download another ddlc3 update for sgy. but unfortuntly this also contain same extension *.md5 i try this too but it is also showing fail... please help me... for kind information i alaways untick re-partation...before updating
post here http://forum.xda-developers.com/showthread.php?t=1600373
http://galaxyydroid.wordpress.com/2012/06/16/stock-rom-cwm-flashable-with-14-toggles-status-bar/ flaah stock rom via cwm recovery
Hope this help you, if u found this helpful den press Thanks
shailu1990 said:
sir i have download update for my sgy. after download complete i have open it with winRAR in pc i got only 2 file in it, one is in *.tar.md5 formate and another one is in *.dll .now i have selected *.tar.md5 as pda in odin and click on start and its fail to install... then again i have done but it alaways show fail...for more information i google it for solution but i didnt get usefull info. someone said to rename it to .tar i have done that too...but unsuccessful...so i thought that this file may be currupted so again i have download another ddlc3 update for sgy. but unfortuntly this also contain same extension *.md5 i try this too but it is also showing fail... please help me... for kind information i alaways untick re-partation...before updating
Click to expand...
Click to collapse
u downloaded the wrong zip.. try other ones
its single file not support flash using odin(galaxy y odin 1.84/1.85) .....................
convert it odin package(3 file) using doky73 great tool
[TOOL] SplitFUS -create your own Odin ready pack
or
find ur odin package hare
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
hi
i need full flash files for n910f.
AP CP CSC AND PIT FILE.
my imei and base band is damaged.
THANK YOU.
wrong forum. this is the n910V
Samsung Galaxy tab pro SM t525
Error while trying to flash Firmware
no pit file
Pls see Pictures
Ps help
PS: I was able to install TWRP
but I don't Know HoTo get further
Witzker said:
Samsung Galaxy tab pro SM t525
Error while trying to flash Firmware
no pit file
Pls see Pictures
Ps help
PS: I was able to install TWRP
but I don't Know HoTo get further
Click to expand...
Click to collapse
I've the same problem now,
have solved the problem?
Thanks
alonzimanuel said:
I've the same problem now,
have solved the problem?
Thanks
Click to expand...
Click to collapse
Afaik you need the multiple! part stock file for this:
The pit file is inside the CSC stock file and can be extracted by ->
delete .md5 from the extension
open the remaing CSC......tar file
copy pit to desktop
When in Odin give it the place where the pit file is and check "repartiton".
bmwdroid said:
Afaik you need the multiple! part stock file for this:
The pit file is inside the CSC stock file and can be extracted by ->
delete .md5 from the extension
open the remaing CSC......tar file
copy pit to desktop
When in Odin give it the place where the pit file is and check "repartiton".
Click to expand...
Click to collapse
Really thanks to you!
alonzimanuel said:
Really thanks to you!
Click to expand...
Click to collapse
I hope it helps.
Please keep us updated
btw. Idk if windows can open tar files as I do all preparations in Linux before using Odin in Windows.